DATA : How to change data in infocube.

Dear Expert,
I have a problem. I have key figure in a info cube which is already filled with some data. I have requirement of changing the key figure value with some other value.
Pls help.
Regards,
Chetana Kotian

Hello
It is not possible to change the data in the cube.
If you need to change then make the request status to RED, Delete the request from the cube, Before that confirm whether the request in PSA is not deleted.
Edit the data in PSA and the the data again from PSA.
Regards
M.A

Similar Messages

How to change it if some data is wrong in ODS and infocube

hi all:
could you please tell me how to change it if some data is wrong in ODS and infocube ?
Best regards

You receive information on all requests that have run in the InfoCube and you can delete requests if required.
http://help.sap.com/saphelp_nw04s/helpdata/en/d4/aa6437469e4f0ae10000009b38f8cf/frameset.htm
Request ID you can find in administration of the InfoCube. If a cubes is compressed you can't delete requestwise...
Regards
Andreas

How to change date selections at Infopackage data selections in production sys

Hi All ,
we are loading data into Infocube from datasource ,one process chain for delta init with data transfor ,which has data selections at infopackage say 06.2014 and other process chain for delta which has same selections at infopackage . Now I want change this data selections at Infopackage level .
I Have tried to change these dates in data selections at infopackage level , tho I have changed and saved to future date at delta initial with data transfor ,it's keep coming back to 06.2014. Of course data selection at delta Infopackage level is faded .
I Want to set future date with delta int with disturbing delta loads . How to do it please .
regards
hari

Hi Ram,
We will load delta Intial with data transfer every weekend , and we run delta everyday , because we do delta init with data transfer with selections say ( 01.20011 to 12.2003 ) every weekend , hope I need to create new delta infopack with new data selections say ( 01.2004 to 12.9999) only to get update data in Infocube.
Please correct me if I am wrong .
Regards
hari

Event Library-how to change date set at 2005 ?

Hi,
The as yet empty Event library shows 2005. (top left in FCP X) I can't figure out on how to change that. I assume it's a date ?
thank you

Hi Ram,
We will load delta Intial with data transfer every weekend , and we run delta everyday , because we do delta init with data transfer with selections say ( 01.20011 to 12.2003 ) every weekend , hope I need to create new delta infopack with new data selections say ( 01.2004 to 12.9999) only to get update data in Infocube.
Please correct me if I am wrong .
Regards
hari

How to change the default date in Person assignment tab?

Hi experts,
Does anyone know how to change the default date in person assignment tab in cj20n? Currently, the system always take the scheduled finish date to the date of the person assignment tab. Can I change it to the start date?
Thanks and rgs,
Michelle

Hi Michelle,
Goto SPRO->Project system->Dates->Scheduling->Specify Parameters for Network Scheduling, Here you can control the workforce planning dates.
Hope this is useful...
Regards
Aatish

How to change the date format?

Hi,
I need to display the data format as(YYYY-MM-DD). But now it displays(2009-1-9)
Here is my code snippet which i used to display the data format as(2009-1-9)
*<INPUT TYPE=TEXT NAME="date_submitted" MAXLENGTH=20 SIZE=10 VALUE="" onBlur= "return dateSubmitted()">  (YYYY-MM-DD)*
*<SCRIPT LANGUAGE="javascript">*
dateSubmitted()
*</SCRIPT>*
function dateSubmitted()
                    if (document.pgUpdate.date_submitted.value == "")
                         date = new Date();
                         month = date.getMonth() + 1
                         document.pgUpdate.date_submitted.value =
                                        date.getYear() + "-" + month + "-" + date.getDate();
                    return true;
Can anybody help me how to change the date format?
Thanks in advance!

prit123 wrote:
use SimpleDateFormat class. The code is :He posted a Javascript related question, not a Java related question.
Please use forums devoted to Javascript. You're here at a Java/JSP forum.
There are JS forums at webdeveloper.com and dynamicdrive.com. Good luck.
String formatPattern = "yyyy-mm-dd";
SimpleDateFormat sdf = new SimpleDateFormat(formatPattern);
sdf.format(yourdate);yyyy-mm-dd denotes year-minutes-days. Please go read the SimpleDateFormat API as well.

How to change the year in a range of column dates to the new year?

How to change the year in a range of column dates to the new year?

Depends on the pattern of the dates. The last procedure will work for any pattern, or no pattern at all.
For examples.the dates are assumed to be in column A, starting at A2
Sequential dates?
Enter first updated date in the first cell.
Enter =A2+1 in cell A3. Copy the cell.
Select A3 to the end of the list. Paste.
With the cells still selected, Copy, then go Edit > Paste Values.
Evenly spaced dates?
Same procedure as above, but replace +1 in the formula with + and the number of days between dates in the list.
Randomly spaced dates?
Select cell B2. Press option-left arrow to insert a (temporary) column to the left of column B.
Click on the empty cell B2 in the new column. Enter the formula below:
=DATE(YEAR(A)+1,MONTH(A),DAY(A))
Copy the cell, then select B2 - Bn where n is the last ow containing a date to be converted. Paste,
With the cells still selected, Copy.
Click on A2, then go Edit > Paste values.
Click on the column B reference tab to select all of column B.
Hover the mouse over the right end of the reference tab, and click the black triangle when it appears.
Choose Delete Column from the menu that appears.
Regards,
Barry

How to change crystal report data field at runtime ?

Hello everyone,
I have a Crystal Report file ,which i am using to generate report for my windows form project .
In that report i have a filed called as Quantity which data type is set as decimal, the requirement is like that the number of value those comes after decimal point that should be set according to the value which is given by the user at the run time .
For eg: If user gives 1 at the run time then the report Qty field value set one value after decimal point. Like 12.1
if user gives 2 then Qty field the value is 12.22 like tat but user can give from zero to any number.. and if it is zero it should not show decimal
Note: The main idea hear is how to change the filed in Crystal Report decimal point value by using code(or we say writing code we need to set manually as user input it will change)
Can any body help me how to solve this issue .
S.K Nayak

I think you could probably make the field you see a formula field and take a parameter as the number of decimal places.
totext converts a number to a string.
totext({decimalField}, 2)
That's 2 decimal places.
You could probably substitute a {parameter} for that 2.
If not then you could substitute an entire formula.
To explore formulas:
foreach (FormulaFieldDefinition f in rpt.DataDefinition.FormulaFields)
MessageBox.Show(f.Name);
// f.Text = your new formula
Where rpt is an instantiated report.
Or add another string field which you display in the column and do the calculation with the original decimal.
Hope that helps.
Recent Technet articles:
Property List Editing;
Dynamic XAML

How to change date for Compensation Package Offer (IT0706)

I try to change date for an existing record in IT0706 to a later date, however system prompted "The compensation package was already activated. It can not be changed" As I checked, the record status is "Activated". Can anybody help to advice on how to change the date ?
Thanks~

Hi Kishor...Thanks for reply...
But i need to change my precentation variable date formt...
i need to write one text like: 'Year to dd/month/yy' in one column formula..
So how can i achieve it..

How to change start date in IT0088.

Hi All,
I am not able to change start date of IT0088(maternity).
Record was maintained from 01.01.2014 to 31.12.9999. Now I need to change from 10.01.2014 to 31.12.9999.
When try to change the record I am facing Changes across Tax year can only extended the validity period".
Could you please advice me how to changes.
Regards
AB

In which activity type you are trying to change the display name ?
Have you checked the field property to verify that the field is locked by any other person ?
Make sure to "Vote as Helpful" and "Mark As Answer",if you get answer of your question.

How to change operation dates in Production Order /Capacity Leveling

Dear Experts ,
We are using ECC 5.0 .In production order , scheduling happing as Backward based on the Sales Order Delivery Date .I am doing the following :
1.Demand as Sales Order with Delievery date : 20.03.2010
2.Running MRP with Lead Time Scheduling -2 in md02 and converting the Planned Order to Production Order .
4.Production Order have following dates :
         Basic Finsish Date : 21.03.2010
         Basic Start : the day Pl.Or--Pr.Ord
         Schedule Start : 15.03.2010
         Schedule Finsish : 17.03.2010
        Schedule Release : 13.03.2010
5.In schedueling margin key : Float Before Production : 3    , FAP : 3 , Release Period : 2
6.In material master : Work Scheduling View : Setup : 3 days , Processing : 4 ,Interoperation : 2 for one Base Qty 1
7.In operation : Op1 : Start Date : 15.03.2010    Finish Date: 15.03.2010
                         Op2 : Start Date : 16.03.2010      Finish Date : 17.03.2010
                         Op2 : Start Date : 17.03.2010      FD : 17.03.2010
Question :
1.How to change the Operation dates in Production Order Operation over view screen ? Today, operation over view screen , Start date and Finsih Date of individual operation are not changable with in Production Basic Start /BF date or beyond .It is only changing based on the Standard Value : Labor
2.How to change/re-schedule operation dates d in CM21 (Graphical view -Work Center Capacity load as per   Production Order and Operation combination ) based on capacity availale in advance dates? I am using Time Profile : SAPSFCZ002 -SFC Graph midterm-3 motnhs and Planning ,
How to solve this above issue in scheduling operation and capacity distribution .
Regards
JH

Closing the thread

Next date in sales order, how to change it? if change it does it triggres

Quick and simple question... what can change a Sales Order Next Date (field VBAK-CMNGV)?? it got changed for one of my Sales Orders according to the changes log via VA02, but no idea how... as I can not see the field via VA03.
Appreciate any help in this regard,
Next date in sales order, how to change it? if change it does it triggres credit check
Thanks
Krishna

Hi,
The next date available if you activated payment card processing
In the sales order header, this field specifies the next planned delivery date and In the delivery header, the field specifies the next planned picking or goods issue date.
This field is used in connection with next delivery/service
If you are not using payment cards in sales order then this will not impact any of your business transaction
Go to HEADER >> Tab PAYMENT CARDS
kapil

How to change data type of input parameter

Hi
In my procedure i declared the data type of "Value Date" Input parameter as Date where as in CR it is showing data type as "Date Time". Can any one please specify how to change to Date.
While prompting for input parameter in description it is showing message as
Please enter Date time in format"yyy-mm-dd hh:mm:ss" . To change the content selected "format field" option. But is there any way to change input parameter data type.
Please suggest how to change.
Thanks Sruthi

Hi Sruthi,
all you need to do on this is open the report go to the parameters, select the parameter that you wish to change and click "Edit". This will allow you to change thefield to a date rather than a date time.
Regards,
Noel

How to change data type of attribute in caf

hi.
this is my problem.
i been added a attribute in an entity service called emloyee. named "Birthday", use the data type "com.sap.caf.core.date".
when i tried modify the entity service, i hit exception about "DST Daylight Saving Time".
because of DST, the date will add an hour such like "1957/04/01 00:00:00.0" to "1957/04/01 01:00:00.0", and com.sap.caf.core.date will throw an exception.
is anyone had same problem like me?
how to fixed it(if passable)?
and, how to change data type?
thanks.

Hi Sruthi,
all you need to do on this is open the report go to the parameters, select the parameter that you wish to change and click "Edit". This will allow you to change thefield to a date rather than a date time.
Regards,
Noel

How can i Read and Delete data in Infocube

Can some help me how to read and delete data in infocube before loading data from direct DSO.
I should be able to read and delete condition with combination (0FISCPER, 0COMP_CODE).
Let us say we load JAN, comp _ code : 0001 (10 records )and JAN comp _ code :003 (30 records ) and JAN, comp _ code : 004 (20 records ) to infocube
second time if DSO gets data of JAN, comp _ code : 0001 (40 records ) it doent need to be 10 old + 30 new, it can be 9 old 21 new lay i need to delete 1 old rec which i dont need. so that is the reason i want delet all JAN, comp _ code : 0001 recods before loading.
Can some one help me

Hello,
You could use the selective deletion available with the cube to get the selective data for 0FISCPER, 0COMP_CODE combination deleted.
If you go in the manage of cube & Content tab, you would find the selective deletion option at the bottom of screen.
If you enter the option, you could give your selections for deleting the records and run the job.
Please let me know if you need any more help.
Regards,
Pankaj

How to change data source name and context root during deployment

Hi,
Env:
WLS 10.1.3
JDev 11.1.1.6
Hudson
I need to deploy two instances of my ADF application on the same development enviroment. We are using Hudson to deploy. My question is how to change data source name and application context root before second deployment.
Kuba

I don't believe there is an inbuilt facility to do this.
Previously how I've done this is when checking files out using Hudson jovs, before the build I then use an Ant extension called XmlTask (http://www.oopsconsultancy.com/software/xmltask/) to modify the required XML files.
Can I ask why you're doing this in the first place please? Multi-tenancy? 2 versions of the same app?
CM.

DATA : How to change data in infocube.

Similar Messages

Maybe you are looking for