Data importing and exporting problem between BADI's

Hi Experts,
I am facing a problem in importing and exporting the data between badi's.
I am able to import and export the data between DOC CHANGE and DOC CHECK BADI's etc; but now i have a requirement to map a field from SRM to R/3.
Supplier order key field which is added to the basic data section of Shopping Cart should be mapped to the corresponding fields in R/3. I have added the field and when i am trying to map it to R/3 i am facing the probelm.
This Supplier order key field will be coming from ZBBP_CATALOG_TRANSFER badi and i am trying to map it in the Z_BBP_CREATE_PO_BACK Badi; i tried by using the below statement to export a single parameter to PO BACK badi from CATALOG TRANSFER Badi
EXPORT zsupp_ord_key FROM zsupp_ord_key TO MEMORY ID 'Z_SUPP_ORD_KEY'.
which is not working.
IMPORT zsupp_ord_key TO zsupp_ord_key FROM MEMORY ID 'Z_SUPP_ORD_KEY'. in PO BACK BADI.
Can any one please let me know why this is happening?
And i have strange problem in this ...
when a user copies a catalog which is already created then we can not map the field to R/3 PO
and again if he tries to create a cart by selecting "Old carts which are already created" we cant map field for the above two things to happen i think we need a custom coding .....
Thank you
Lokesh.

Hi Lokesh,
BADI implementations have classes for which an instance is created at runtime and hence the import and export memory logic will not work.
Please try to create a function module for these BADI and call them in these BADI's. Then go ahead with the import and export logic. This could help.
I would rather advice, to figure out an option to avoid this memory manipulations.
Regards
Kathirvel

Similar Messages

Is it possible to import and export dump between oracle 9 and oracle 11?

Is it possible to import and export dump between oracle 9 and oracle 11?
Source DB : Oracle 11g(unix0
Oracle client : Oracle 9(Windows)
Export import utility : Oracle 9's
Destination DB : oracle 9

I am getting the Following Error and export utility is not responding after this.
Export: Release 9.2.0.1.0 - Production on Thu Jul 15 14:37:01 2010
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
server uses AL32UTF8 character set (possible charset conversion)

Page and group Import and export problems

we are migrating from portal 3.0.6
(part of ias 1.0.2.0.1)
to
3.0.8(part of iAS 1.0.2.1).
OS:Solaris 2.6
The exports from 306 works fine.
when i imported security data for users and groups(secimp.csh) it swapped the users for two groups
i get the following error when i try to import pages
ERROR at line 1:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "PORTAL30.WWUTL_POB_TRANSPORT", line 1879
ORA-01403: no data found
ORA-06512: at line 6
Anybody has this problem?
Thanks
null

Hmm.. export/import only works between portal installations at the same version level. What you need to do is to use the upgrade scripts that will take you from Portal 3.0.7 to Portal 3.0.8, which are not available yet. We hope to make these scripts available in a couple of weeks on OTN. (Yes.. I too am waiting for these scripts).
Best Regards,
Harry Wong

IMPORT and EXPORT PROBLEM

Hi All
I have a problem.I need to export the data and then import it inot another database.I used imp and exp file but it is not exp and imp data but exp and imp database structure,triggers,procedure etc but not data
Please tell me how should i proceed.
Thanx
Manoj

When you export, it will list all of the table structures that you are exporting. You can limit some of the other information that it exports by setting parameters.
I assume that the database you want to import into already has all of the table structures and grants.
When you export, set the following parameters:
GRANTS=N
INDEXES=N
CONSTRAINTS=N
TRIGGERS=N
The default for exporting data is Y so you don't need to include that.
It will still export the table structures but you can ignore them on import.
Then on import, set the following parameters:
GRANTS=N
INDEXES=N
CONSTRAINTS=N
IGNORE=Y
The default for importing data is Y so you don't need to include that.
That will import data and not import table structures unless there is a new table in the database that you export from.
Another option that might help is to export by using a table list. This will eliminate the issue of export procedures.

Import and export problems!

I'm new to Aperture so bare with me please, I'm using the cannon Rebel XT, I noticed ( after an update I'm thinking) that when I wanted to import from the camera the frames were randomly placed, and when I click X to close and then click import again they would be in order, I called about this and the speaker said, well it seems like you have it working, I was hoping that with a new updates this would be fixed,( like it did with contact sheet) then I wanted to export a project to a RW-CD the same thing happen when checking the CD the Image were randomly placed and very unprofessional, Can anyone help me with this? Should I reinstall the aperture program?
mac book pro Mac OS X (10.4.8)

Hi Billy,
No, don't reinstall Aperture, though do consider trashing the plist file:
user/Library/Preferences/com.apple.Aperture.plist
This will not break anything, but you will need to reset your preferences when you relaunch Aperture. So, note them down first.
Are the images out of order in the IMPORT viewer or after you import into a project?
If in the IMPORT viewer, then I have no clue.
If in the Project viewer,check to see whether the sort order is image date or custom or version name. Image date is usually good.
I'm not sure about the export side, as file order is (typically) seen using Finder, based on which column you wish to sort on. Does clicking the Name or Date column heading give you the desired result? Or are you seeing the order through some other means? Please explain.
Thanks,
G.

What is the best way to import and export footage from the 5D Mark II?

Hello,
I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline. I want to know the best way to retain resolution before I delve into this project.
My questions:
1) What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
2) What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
3) What is the best way/ codec/ format to import and export/ render between premiere and after effects? I am speaking mostly of vfx and color correction. I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
I know this is pretty broad, but as a solo filmmaker I really need someone's guidance. I rarely ever finish my films with the same, crisp look as the footage. I need pipeline help, and really appreciate it!

ascreenwriter wrote:
Hello,
I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline. I want to know the best way to retain resolution before I delve into this project.
My questions:
1) What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
2) What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
3) What is the best way/ codec/ format to import and export/ render between premiere and after effects? I am speaking mostly of vfx and color correction. I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
I know this is pretty broad, but as a solo filmmaker I really need someone's guidance. I rarely ever finish my films with the same, crisp look as the footage. I need pipeline help, and really appreciate it!
1. Follow the advice above. Also use the Media Browser to import the footage in case you have spanned media files. Import files with the Media Browser.
2. It largely depends on what you wish to ouput to: Blu-ray, web, etc. This FAQ gives the best answer: What are the best export settings?
3. Use the Replace with Adobe After Effects Composition function.

Problem with Import and Export Data Wizard

Downloaded and installed SQL Server Express 2008 R2 today because I want to explore how Access interacts with SQL Server (using my home computer). I'm using Access 2010 (under Windows 7), so the 2008 version of SQL Server Express seemed to be the version
to use.
After a couple of false starts, installation appeared to go okay. After the installation. My Start menu listed Microsoft SQL Server 2008 and Microsoft SQL Server 2008 R2. The latter listed Import and Export Data (64-bit). When I clicked that, the first Import
and Export Data Wizard page was displayed. I wasn't ready at that time to explore the wizard, so I closed it. An hour or so later I again attempted to open the Import and Export Data wizard. This time, the wizard didn't open. Instead this error message was
displayed: "The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered."
I found DTS.dll on my computer at C:\Program Files\Microsoft SQL Server\100\DTS\Binn, so the file is available, but don't know whether it is registered.
How can I correct this problem?

First can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook]

Importing and Exporting Data with a Clob datatype with HTML DB

I would like to know what to do and what to be aware of when Importing and Exporting data with a Clob Datatype with HTML DB?

Colin - what kind of import/export operation would that be, which pages are you referring to?
Scott

Error message when importing data using Import and export wizard

Getting below error message when importing data using IMPORT and EXPORT WIZARD
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
<dir>
<dir>
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
- Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
</dir>
</dir>
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Smash126

Hi Smash126,
Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
The following document about Add Data or Log Files to a Database is for your reference:
http://msdn.microsoft.com/en-us/library/ms189253.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

No data source - OLE DB provider for ODBC is not shown in import and export wizard

Dear Sirs,
Would you please let me know how to activate the OLE DB provider for ODBC in import and export wizard?
Now I could use .NET framework for odbc only but it seems have problem in mapping table fields.
Please advise.
Thanks & Regards,
Clara

see this
http://msdn.microsoft.com/en-us/library/windows/desktop/ms712975(v=vs.85).aspx
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Difference between Import and Export parameters in Function Module

Hi All,
I am unclear about the import and export parameters, when i create a function module. Can anyone explain abt this. However when i call the function module in any program the import parameters in Function module are displayed as exporting in program amd the export parameters as importing.
Any help on this would be appericiated.
Shejal.

HI,
Import parameter in FM is the value u provide to FM for processing.
export is the value u get from FM after processing.
when u call a FM in a progam the import parameter will appear as Export bcos u r giving value to the FM.
and u r getting value from FM in import parameter(bcos u r importing).
rgds,
latheesh
Message was edited by: Latheesh Kaduthara

Regarding import and export statement

hi experts,
how to import and export the internal table between programs...
Nice solutins with maximum points.....

Example of a program exporting an internal table to ABAP memory.
Prog 1
parameters: pa_vbeln like vbak-vbeln.
data: itab type standard table of vbak.
* get data to fill the table
select * from vbak into table itab
            where vbeln = pa_vbeln.
* now store the internal table to ABAP memory
export itab to Memory ID 'table''.
* here we call another program, prog 2
submit prog2 and return.
Prog 2 -> This imports the internal table exported by prog 1 and writes the content of the internal table to a list
data: jtab type standard table of vbak,
       wa_vbak type vbak.
* importing the itab that was exported by prog1
import itab to jtab from memory id 'table'.
loop at jtab into wa_vbak.
write:/ wa_vbak-vbeln,
        wa_vbak-erdat.
endloop.
* clear the specific memory id after required processing is complete
free memory id 'table'
Hope this solves your problem.
Cheers,
Sougata.
Subas,
Copy/paste your code, I'll have a look. First check if data is being selected before Export command.
Edited by: Sougata Chatterjee on Jan 11, 2008 12:31 PM
Also make sure you create prog2 as an executable program. Then, run prog1 with a valid Sales Order number. To understand it more clearly run it in debugging mode and step through. It should work fine in any system.
Edited by: Sougata Chatterjee on Jan 11, 2008 12:42 PM

Looking for a program that can handel import and export of palm doc files

I am looking for a program that can handel the import and export of palm doc Files that can convert them to to either txt or RTF files for Vista 32, running Palm Desktop 7.1.
Could anyone give me a few suggestions of any plug-ins that would be good me?
Hearns
Post relates to: Palm IIIxe
This question was solved.
View Solution.

Ok, you need to clean uninstall Palm desktop 6.2. Install Palm desktop 4.1.4 and download and install documents to go version 6.
Here are the clean uninstall instructioins for Vista.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to Start --> Documents -->
Palm OS Desktop. Highlight your Palm Desktop username and right click and
copy. Then go to your PC desktop right click on a blank spot and select paste.
If this is the first time you are installing Palm desktop and encountering a problem, skip the previous step.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer.
Go to the following locations on the PC and delete the folders listed below.
C:\Program Files\Palm or Palm One
C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
PalmOne
C:\Users\[Vista Login Name]\appdata
*Note you may need to view hidden folders to get to appdata. To do that go
into your control panel and open folder options. Go to view tab and uncheck
hide hidden files.
Once this is done you will need to delete some registry keys from your PC Operating System.
Word of warning, going here and deleting the wrong thing can cause your PC
from starting up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
Go to start on the PC, in the search field type "regedit.exe" without quotes.
Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer.
Then reinstall your palm desktop from the CD and do a hotsync. Use the username that is on the handheld.

Internal table with Import and Export

Hi All,
Hi all
Please let me know the use of <b>Internal table with Import and Export parameters and SET/GET parameters</b>, on what type of cases we can use these? Plese give me the syntax with some examples.
Please give me detailed analysis on the above.
Regards,
Prabhu

Hi Prabhakar,
There are three types of memories.
1. ABAP MEMORY
2. SAP MEMORY
3. EXTERNAL MEMORY.
1.we will use EXPORT/ IMPORT TO/ FROM MEMORY-ID when we want to transfer between ABAP memory
2. we will use GET PARAMETER ID/ SET PARAMETER ID to transfer between SAP MEMORY
3. we will use EXPORT/IMPORT TO/FROM SHARED BUFFER to transfer between external memory.
ABAP MEMORY : we can say that two reports in the same session will be in ABAP MEMORY
SAP MEMORY: TWO DIFFERENT SESSIONS WILL BE IN SAP MEMORY.
for ex: IF WE CALL TWO DIFFERENT TRANSACTIONS SE38, SE11
then they both are in SAP MEMORY.
EXTERNAL MEMORY: TWO different logons will be in EXTERNAL MEMORY.
<b>Syntax</b>
To fill the input fields of a called transaction with data from the calling program, you can use the SPA/GPA technique. SPA/GPA parameters are values that the system stores in the global, user-specific SAP memory. SAP memory allows you to pass values between programs. A user can access the values stored in the SAP memory during one terminal session for all parallel sessions. Each SPA/GPA parameter is identified by a 20-character code. You can maintain them in the Repository Browser in the ABAP Workbench. The values in SPA/GPA parameters are user-specific.
ABAP programs can access the parameters using the SET PARAMETER and GET PARAMETER statements.
To fill one, use:
SET PARAMETER ID <pid> FIELD <f>.
This statement saves the contents of field <f> under the ID <pid> in the SAP memory. The code <pid> can be up to 20 characters long. If there was already a value stored under <pid>, this statement overwrites it. If the ID <pid> does not exist, double-click <pid> in the ABAP Editor to create a new parameter object.
To read an SPA/GPA parameter, use:
GET PARAMETER ID <pid> FIELD <f>.
This statement fills the value stored under the ID <pid> into the variable <f>. If the system does not find a value for <pid> in the SAP memory, it sets SY-SUBRC to 4, otherwise to 0.
To fill the initial screen of a program using SPA/GPA parameters, you normally only need the SET PARAMETER statement.
The relevant fields must each be linked to an SPA/GPA parameter.
On a selection screen, you link fields to parameters using the MEMORY ID addition in the PARAMETERS or SELECT-OPTIONS statement. If you specify an SPA/GPA parameter ID when you declare a parameter or selection option, the corresponding input field is linked to that input field.
On a screen, you link fields to parameters in the Screen Painter. When you define the field attributes of an input field, you can enter the name of an SPA/GPA parameter in the Parameter ID field in the screen attributes. The SET parameter and GET parameter checkboxes allow you to specify whether the field should be filled from the corresponding SPA/GPA parameter in the PBO event, and whether the SPA/GPA parameter should be filled with the value from the screen in the PAI event.
When an input field is linked to an SPA/GPA parameter, it is initialized with the current value of the parameter each time the screen is displayed. This is the reason why fields on screens in the R/3 System often already contain values when you call them more than once.
When you call programs, you can use SPA/GPA parameters with no additional programming overhead if, for example, you need to fill obligatory fields on the initial screen of the called program. The system simply transfers the values from the parameters into the input fields of the called program.
However, you can control the contents of the parameters from your program by using the SET PARAMETER statement before the actual program call. This technique is particularly useful if you want to skip the initial screen of the called program and that screen contains obligatory fields.
Reading Data Objects from Memory
To read data objects from ABAP memory into an ABAP program, use the following statement:
Syntax
IMPORT <f1> [TO <g 1>] <f 2> [TO <g 2>] ... FROM MEMORY ID <key>.
This statement reads the data objects specified in the list from a cluster in memory. If you do not use the TO <g i > option, the data object <f i > in memory is assigned to the data object in the program with the same name. If you do use the option, the data object <f i > is read from memory into the field <g i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
You do not have to read all of the objects stored under a particular name <key>. You can restrict the number of objects by specifying their names. If the memory does not contain any objects under the name <key>, SY-SUBRC is set to 4. If, on the other hand, there is a data cluster in memory with the name <key>, SY-SUBRC is always 0, regardless of whether it contained the data object <f i >. If the cluster does not contain the data object <f i >, the target field remains unchanged.
Saving Data Objects in Memory
To read data objects from an ABAP program into ABAP memory, use the following statement:
Syntax
EXPORT <f1> [FROM <g 1>] <f 2> [FROM <g 2>] ... TO MEMORY ID <key>.
This statement stores the data objects specified in the list as a cluster in memory. If you do not use the option FROM <f i >, the data object <f i > is saved under its own name. If you use the FROM <g i > option, the data objet <g i > is saved under the name <f i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
Check this link.
http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
Thanks,
Susmitha.
Reward points for helpful answers.

Regarding import and export memory

hi, currently i have encountered this problem when i am using the import and export memory statement. After i export my table name from program1 to program2, i do an import statement at program2 to retrieve the table name but there is a problem in retrieving the name. Below are the codes.
PROGRAM1's codes:
EXPORT IO_TABLE TO MEMORY ID MEM_STR.
SUBMIT PROGRAM2 AND RETURN.
PROGRAM2's codes:
IMPORT IO_TABLE TO MEMORY ID MEM_STR.
P_TABLE = IO_TABLE.
FREE MEMORY ID MEM_STR.
CLEAR MEM_STR.

Check these programs they are working fine, the report ZCALLING calls the report ZCALLED.
REPORT ZCALLING.
DATA:
BEGIN OF IO_TABLE OCCURS 0,
MATNR TYPE MARA-MATNR,
END OF IO_TABLE.
IO_TABLE-MATNR = '38'.
APPEND IO_TABLE.
EXPORT IO_TABLE TO MEMORY ID 'MEM_STR'.
SUBMIT ZCALLED AND RETURN.
REPORT ZCALLED.
DATA:
BEGIN OF IO_TABLE OCCURS 0,
MATNR TYPE MARA-MATNR,
END OF IO_TABLE,
P_TABLE LIKE STANDARD TABLE OF IO_TABLE WITH HEADER LINE.
IMPORT IO_TABLE FROM MEMORY ID 'MEM_STR'.
P_TABLE[] = IO_TABLE[].
LOOP AT P_TABLE.
WRITE P_TABLE-MATNR.
ENDLOOP.

Data importing and exporting problem between BADI's

Similar Messages

Maybe you are looking for