Data in Cube when excute query it is not reflecting

Hi Gurus,
I have two cubes above that a multiprovider.. When i excute query the data for the one keyfigure is not showning ... In the multi provier i can able to see that data for the cube... any suggestions Please

a few things we can do
Have the request ID set to most current data - this char is available in data package dimension in the query.
Try restricting the KF to the concerned dataprovider - and set it to constant - and see if it gets data.
Check if you have a global variable on the dataptrovider pointing to other cube in the dataprovider

Similar Messages

Data Driven Subscriptions Error - the query processor could not start the necessary thread resources for parallel query execution

Hi,
We are getting the following error when certain data driven subscriptions are fired off: "the query processor could not start the necessary thread resources for parallel query execution". I've read other posts that have the same error, and
the solution usually involves adjusting MaxDOP to limit the number of queries that are fired off in parallel.
Unfortunately, we cannot change this setting on our server for performance reasons (outside of data driven subscriptions, it negatively impacts our ETL processing times). We tried putting query hints like "OPTION (MAXDOP 2);" in the reports
that are causing the error, but it did not resolve the problem.
Are there any settings within Reporting Services that can be adjusted to limit the number of subscriptions that get fired off in parallel?
Any help is appreciated - thanks!

Yes, that is correct. It's a painful problem, because you don't know which specific subscription failed. For example, we have a data driven subscription that sends out about 800 emails. Lately, we've been having a handful of them fail. You don't know
which ones out of the 800 failed though, even from the RS log files - all it tells you is that "the
query processor could not start the necessary thread resources for parallel query execution".
Thanks, I'll try changing <MaxQueueThreads> and will let you know if it works.
On a side note: I've noticed that it is only reports with cascading parameters (ex. where parameter 2 is dependent on the selection from parameter 1) that get this error message...

Query changes are not reflecting

Hi All,
Scenario: We have changed in Query from Query Designer in BED system and moved to Quality system but the changes are not reflecting. After checking tables RSRREPDIR and RSZCOMPDIR, we found out the information as below:
Note: Production System - BEP
Quality - BEQ
Development - BED
We have 2 issues with Queries in different systems as below:
Issue 1: Query name: T01
Issue 2: Query name: T02
Issue1:
Table - RSRREPDIR
BEP -
COMPUID : 4U2P65LLZVYUZLGQFYPVZ1R2M   (also present in table - RSZCOMPDIR)
GENUNID : 4U2QC61SREY9HKJFVEHM894CU
BEQ -
COMPUID : 4T6BTKW1X3RYN7H2UO4WMLWLQ   (also present in table - RSZCOMPDIR)
GENUNID : 4T6BUM0LKCPAO5H71ZG983P72
COMPUID : 4U2P65LLZVYUZLGQFYPVZ1R2M   (also present in table - RSZCOMPDIR)
GENUNID : 4U2QC61SREY9HKJFVEHM894CU
BED -
COMPUID : 4T6BTKW1X3RYN7H2UO4WMLWLQ   (also present in table - RSZCOMPDIR)
GENUNID : 4T6BUM0LKCPAO5H71ZG983P72
COMPUID : 4U2P65LLZVYUZLGQFYPVZ1R2M   (not present in table - RSZCOMPDIR)
GENUNID : 4U2QC61SREY9HKJFVEHM894CU
Issue2:
Table - RSRREPDIR
BEP -
COMPUID : 4U18JA5FD2PB9ZB1RS0PWS5E6   (also present in table - RSZCOMPDIR)
GENUNID : 4U188U6N2623QPCTMC43MFOZY
BEQ -
COMPUID : 4T6MDKABLUBC46HOKZMC0K6KU   (also present in table - RSZCOMPDIR)
GENUNID : 4T6MEWPZ6178KB4LDKDREY34E
COMPUID : 4U18JA5FD2PB9ZB1RS0PWS5E6   (also present in table - RSZCOMPDIR)
GENUNID : 4U188U6N2623QPCTMC43MFOZY
BED -
COMPUID : 4U18JA5FD2PB9ZB1RS0PWS5E6   (not present in table - RSZCOMPDIR)
GENUNID : 4U188U6N2623QPCTMC43MFOZY
but in Table - RSZCOMPDIR
BED -
COMPUID : 4T6MDKABLUBC46HOKZMC0K6KU
GENUNID : 4T6MEWPZ6178KB4LDKDREY34E.
Please suggest which query element and from which table we should remove to have a sync with all systems.
Thanks in advance!!
Regards,
Niranjan Chechani

If possible can u Compare Bex queries in All 3 systems Using RSRTQ tcode, Either they are matching or not?
How to compare using RSRTQ u can Refer Below :
Compare Bex Queries in Different Client /System.
Regards,
Seshu.P

Query changes are not reflecting in the Workbook.

Hi All,
I have modified the query by adding attributes. But the changes are not reflecting in the workbook.
Do i need to insert the query again in the workbook or is there any option that will reflect the changes in the workbook
Thanks in Advance,
Suneel.

Hello Suneel,
if you insert the query again, it will work, but it is not the best way to delegate the query changes to the workbook.
Just open your query from within your workbook (BEx menu 'change global definition') and use the green button at the top left in order to transfer the new query structure to the workbook. The query will be executed and you should see the changes.
Don't forget to save the workbook afterwards.
Regards,
Kirill

Time and date settings change when phone is powered down (not shut off)..

I recently installed the iOS 8 update and immediately noticed that the time and date settings would change when I powered down my iPhone. I did not turn off my phone, only clicked the button to power down or save power. I have tried all the fixes, suggestions, etc., but I am still having issues. In the power down state, I am able to receive phone calls or texts but when I go into my phone, the time and date will be off. It stops from the moment I click the button to power down the phone. Please don't get this confused with turning off the phone completely. This happens when I click the button for power down or power save, however it is described.
So, how do I fix it? Is the app/software for the clock the problem? Is the battery distribution the problem? For some reason, in power down mode, the clock is not receiving constant power in order to keep accurate time. It stops the moment I click the button. Any suggestions? fixes, etc. I could try. Apple support techs were absolutely no help what-so-ever.

This sounds exactly like what is going on with my phone, http://www.idownloadblog.com/2012/10/19/iphone-5-date-time-glitch/

Is there a way to see an access history for my ipad mini? dates and times when it was accessed? not particularly a safari history, just when the pin code was last put in?

Im worried that my ipad is being used without my knowledge, I am randomly losing whole conversations from my messages although they are still visible on my iphone. I wanted to see when my ipad was last accessed before i start accusing people of messing with it.

I'm not aware of any setting or app that will do what you are looking for, but it possible you might find something in the app store.
You should consider changing your pass code and possibly using complex rather than simple pass code. And keeping the device secure when not in your possession.

BEX Query Changes are not Reflecting in WAD

Hello SDN Experts,
I'm Facing a Typical Weird Issue. We got an Requirement to Create a New Variable in a Exisitng BEX Query. Assume that we have already a Variable on 0VENDOR. So I have Removed that Variabale and Added new Variable which was created by myself. So when I execute the Query I;m gettign displayed the new Variable wihch is working fine.
But the problem is with WAD. WAD is showing both the old and new Variables. So in selection paramater it is displaying two 0VENDOR variables instead of showing one.
Could you please Guide me how can the BEX Changes will get reflected in WAD report as well ???
Your advice are highly appreciated
Regards,
Aluri

Hello Hemanth,
This issue may be because you only removed variable but didn't change the 'input ready' settings of it.
Steps, go back to removed variable -- properties --- details -- then deselect 'variable is ready for input' -- save and exit -- try WAD report..
Hope this will help.
Thanks.

SAP query SQ01 change not reflecting in Querys ABA program

Hi Guys,
Need your opinion on this issue. We have modified an existing query in SQ01. Added a new selection field and re-arrranged the selection criteria in general. However, I do not see any change in the generated ABAP report. The timestamp on the report in SE38 is from almost a year ago. Am i missing a step here?
Thanks.

Hi.
Please try.
SQ01
Input query ID.
menu-Query-More functions-Generate program

Delete data from Cube which is uploaded to Open hub

Hello Friends I am required to delete the data from GL Cube, But it is connected to 2 Open Hub
which has one as table /BIC/OHZZIGL_C10 defined in Open hub destination. I deleted the data from this table in SE14, but still when I try to delete the data from cube it throws the below error
Please help me how to now delete the data from cube, when should i go in open hub t delete all the uploaded requests.
Request 1.882 already updated in target 3.913 by DTP request DTPR_4CU6JHRJ7MY889A7XBUJ0GDVK(ZZIGL_C10)
Thanks
soniya

just check on your datamart status for that request. Go to the manage screen of your infocube and check where all that request got updated using datamart status.

How to create olap cube using Named Query Table in Data source View

I Create on OLAP Cube using Existing Tables Its Working Fine But When i Use Named Query Table with RelationShip To other Named query Table It Not Working .So give me some deep Clarification On Olap Cube for Better Understanding
Thanks

Hi Pawan,
What do you mean "It Not Working"？ As Kamath said, please post the detail error message, so that we can make further analysis.
In the Data Source View of a CUBE, we can define a named query. In a named query, you can specify an SQL expression to select rows and columns returned from one or more tables in one or more data sources. A named query is like any other table in a data source
view (DSV) with rows and relationships, except that the named query is based on an expression.
Reference:Define Named Queries in a Data Source View (Analysis Services)
Regards,
Charlie Liao
TechNet Community Support

UJK_EXECUTION_EXCEPTION:Data records rejected when writing to the cube

Hello,
I ran into an issue while testing Script using UJKT.
I can plan the same intersection/record from BPC template but it doesn't work from Script/UJKT.
I checked work statuses, scripts, rules. Found nothing that locks the intersection.
Anything else I should check?
Is there a way to find out more detailed log to see why the data records are rejected.
Appreciate your help. Thanks.
P.S. I looked at many scn posts on this error but nothing really helped.
UJKT Log:
#dim_memberset=9
REC :%VALUE% * 110
CALCULATION BEGIN:
QUERY PROCESSING DATA
QUERY TIME : 571.13 ms. 1 RECORDS QUERIED OUT.
QUERY REFERENCE DATA
CALCULATION TIME IN TOTAL :197.47 ms.
1 RECORDS ARE GENERATED.
CALCULATION END.
ENDWHEN ACCUMULATION: 1 RECORDS ARE GENERATED.
UJK_EXECUTION_EXCEPTION:Data records rejected when writing to the cube

Thanks Vadim. I debugged UJKT but didn't find anything helpful yet.
Will keep digging.
Here is the script.
*XDIM_MEMBERSET CAP_VIEW = 27
*XDIM_MEMBERSET PPS_TIME = 2014.03
*XDIM_MEMBERSET PPS_ITEM = 52540046EAC51ED3B2E49C10DBDB1565
*XDIM_MEMBERSET CAP_GRP = ZHM_IT00050001
*XDIM_MEMBERSET PPS_ENTITY = US
*XDIM_MEMBERSET CAP_CATG = ZHM_IT0005
*XDIM_MEMBERSET PPS_ACCOUNT = COST
*XDIM_MEMBERSET RPTCURRENCY = USD
*DESTINATION_APP=PPS_PLANNING
*SKIP_DIM = CAP_CATG,CAP_GRP,CAP_VIEW
*ADD_DIM PPS_CATG = ZHM_IT0001
*ADD_DIM PPS_GROUP = ZHM_IT00010001
*ADD_DIM PPS_VIEW = ZHM_IT0001000127
*WHEN PPS_ACCOUNT
*IS COST
*REC(EXPRESSION=%VALUE%*10)
*ENDWHEN
*COMMIT
LGX:
LOG:
FILE:\ROOT\WEBFOLDERS\HM_PLAM \ADMINAPP\PPS_CAPPLAN\TEST.LGF
USER:SMULLAPUDI
APPSET:HM_PLAM
APPLICATION:PPS_CAPPLAN
[INFO] GET_DIM_LIST(): I_APPL_ID="PPS_CAPPLAN", #dimensions=9
CAP_CATG,CAP_GRP,CAP_VIEW,MEASURES,PPS_ACCOUNT,PPS_ENTITY,PPS_ITEM,PPS_TIME,RPTCURRENCY
#dim_memberset=8
CAP_VIEW:27,1 in total.
PPS_TIME:2014.03,1 in total.
PPS_ITEM:52540046EAC51ED3B2E49C10DBDB1565,1 in total.
CAP_GRP:ZHM_IT00050001,1 in total.
PPS_ENTITY:US,1 in total.
CAP_CATG:ZHM_IT0005,1 in total.
PPS_ACCOUNT:COST,1 in total.
RPTCURRENCY:USD,1 in total.
REC :%VALUE%*10
CALCULATION BEGIN:
QUERY PROCESSING DATA
QUERY TIME : 1038.58 ms. 1 RECORDS QUERIED OUT.
QUERY REFERENCE DATA
CALCULATION TIME IN TOTAL :173.04 ms.
1 RECORDS ARE GENERATED.
CALCULATION END.
ENDWHEN ACCUMULATION: 1 RECORDS ARE GENERATED.
UJK_EXECUTION_EXCEPTION:Data records rejected when writing to the cube
Thanks,
Vasu

When changing query data source property.....

hello folks,
I have this very weird behavior in oracle forms 10 g R2:
in my form I built a datablock " DB " based on a table " table1 ", in that datablock I added a push button that changed the query data source name of data block DB to " table2 " using the set_block_property() built-in, please note that table1 and table2 has the same structure.
When I query the table2, and if i try to update a record, the updates are not saved and I got the error ora - 0000 , It seems that after changing the query data source to table2, if i try to update a record, the locking is perform to table1 (the original query data source that the datablock is built in the first place) ....
Please can anyone help or explain me this behavior and what can i do to perform a workaround for it,,,,,
and than you in advance...

dear Mark,
What indicates that the record is locked? More information please. well if query the v$lock view or from the EM I can see that the lock is performed on the first table

Problem with data in Cube 0IC_C03 in Bex Query

Hi,
(1) I am loading data into cube 0ic_c03 from data sources 2LIS_03_BX,2LIS_03_BF and 2LIS_03_UM. I need one more field Manufacturing date in my cube.
(2) That's why I enhanced datasource 2LIS_03_BF, and populated HSDAT (Manufacturing date from MSEG table.) Date is visible in datasource.
(3) I loaded data in Cube from 03_BX, did collapse. Then loaded data from 03_BF did collapse. In my cube data display (or LISTCUBE) I am able to see Manufacturing date and keyfigure values (Received stock qty:transit and Issued stock qty: transit) in one row.
eg.-
Plant Manufac.date Issued Qty Received qty
5102 01.07.2007 2000 3000
But In my Bex query, I see -
Plant Manufac.date Stock:in Transit
5102 01.07.2007 #
5102 # 1000
Ideally I want to show data in query -
Plant Manufac.date Stock:in Transit
5102 01.07.2007 1000
Should I enhance 2LIS_03_BX data source also with MAnufacturing date ?
Please suggest...It is urgent..
Thanks
Saurabh

Thats great Shalini.
If it is helpful..please assign points.
If you need any information on that please mail me [email protected]
Regards,
RK Ghattamaneni.

How to make data in Essbase cube equal to data in DW when drilling through

Is there standard ways in Oracle BI + Essbase to make data in Essbase cube and DW equal (corresponding)?
For example when we are drilling down from cube to DW in this moment in DW may be loaded additional data (new data) which are not loaded in the cube yet.
So we have situation where data in the cube not correspond to data in the DW.

I think rebuilding the cube on a more frequent basis not solves the problem – there will be significant time between the moment when data loaded in DW and when data updated in the cube.
I thought of creating 2 tables in DW (“new” and “old”) and 2 cubes (“new” and “old”).
So the process of loading data will look like this:
1. We have corresponding data in table “old” and cube “old”. User always works with “old” objects.
2. Load data to table “new”.
3. Load data to cube “new” from table “new”.
4. Rename tables and cubes: “old” to “new”, “new” to “old”. Here users starting to work with updated cube and table.
5. Add new changes go cube and table “new” (there will be old data).
6. Go to step 2.
But this way is too expensive (storage amount doubles).
And maybe easier way can be found?...

Drill Down when data is coming from a query

Hello experts,
I have one question regarding the drill down functionality. For sake of simplicity, let's assume we are working on a pie chart.
i) Data is coming from a query (via the universe).
ii) The data source is really the query itself, it is not coming from the excel sheet. In other words, the query is not first copied to the excel sheet and then fed to the pie chart. Pie chart directly uses the query binding.
ii) When a slice in the pie is clicked, I want to copy that slice's information into a cell (basically the drill-down functionality).
I wasn't able to achieve this functionality. I think the problem is the 'source data' field in the 'insertion' tab. I select 'Row' as my insertion type and I also select a destination. However, when it comes to selecting 'source data' I have nowhere to point to since my source data is the query (query binding is not an option here). So, since I have no real source data, I cannot drill down and copy the values to the destination cell.
The workaround is to copy the query data into excel first, but I don't that is an elegant solution. Is there any other way to achieve this?
Regards,
Guven.

Hello David,
You confirm that mapping the whole column would be an option, right?
Here is why I asked this question: Let's assume I have a dashboard that displays the types of encounters in a hospital. Some examples of encounter types are: emergency, elective, newborn, etc... Currently, in the database, there is data for these 3 types. So, the dashboard contains a pie chart and each slice corresponds to the number of visits by patients for this encounter type (e.g. 450 emergency encounters, 9900 elective encounters and 32 newborn encounters).
Tomorrow, a new encounter type could take place in the hospital and this of course has to be reflected in the dashboard. If I make the assumption that there are only 3 encounter types, then the dasboard would be missing information. So, in this case, should I be mapping the whole column to the pie chart?
Regards,
Guven.

Data in Cube when excute query it is not reflecting

Similar Messages

Maybe you are looking for