Data in Infoobject

Hi all ,
            I have a Infoobject which is master data - text only , I can see the text of that infoobject in one cient .BD1 but not in QA, I didnt see any master data loaded to this in dev or QA , but it is fed only thru transaction , the same load has been done in QA also but why dont we see the text in QA ?
any inputs ?
thank you.
Note : The text table of that IO in dev  has data but not in QA. Why is this difference.

Did u transport the IO properly?
Did u get any errors when u transport the IO?
Did u check the properties... length, data type etc... after transporting the IO from Dev to QA?
Before all the above did u transport the datasource from DEV to QA and replicate the datasource in QA?
Check all the above things once...
Assign points if this helps u...
Regards,
KK.

Similar Messages

  • How to delete the Hierarchy data from Infoobjects.

    How to delete the Hierarchy data from Infoobjects. In my case I had 300 records in the corresponding table of info object.
    When i was trying to delete the hierarchy data, I am getting error message. "Some master data not deleted". Can any one tell me to delete all these records by using a program.

    Hi
    Go to SE11 and enter the hierarchy table name.
    /BIC/H....(infoobject name)...and execute the table and select table entry and delete all....
    Thanks
    TG

  • Caller-70 Error while loading master data into infoobject

    hi ,
    I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings were PSA and then into data target.
    Short dump in the Warehouse
    Diagnosis
    The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
    System Response
    "Caller 70" is missing.
    ST22 dump analysis is as below:
    Termination occurred in the ABAP program "GP476CZYBEF2WX53UZ8TXFG6XOS" - in                  
    "VALUE_TO_SID_CONVERT_DB".                                                                  
    The main program was "RSMO1_RSM2 ".
    Please help as soon as you can..Production problem....
    Regards
    Rakesh

    Hi rakesh,
    May be IDOCs not processed completely,
    Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
    Cheers
    Raj

  • Key Figure - Data in InfoObject (MasterData) as attribute - how to....

    Hello,
    I have following scenario: I have a key figure which is filled with priorities (1-5). Now I have as a requirenemt - in order that the user can report on the priority - to fill a new InfoObject with the same content (priority). The new InfoObject is an attribute on an already existing InfoObject.
    It should be a one-time action for data for the past.
    Any (creative) idea?

    You can add a CHAR Infoobject Priority in same Infoprovider and map it to Key figure priority. Then you can use the new Char Priority to report.

  • Unable to  view the data in infoobject

    Hi all,
    I am loading the data to info-obj this is the first time i am working on BI 7. everything is successfull. i had created the transformation and dtp successfully n in monitor screen its showing that the data has been loaded sucessfully. the thing is i didnt maintain a infosource as i am loading the data from the only one DS to one info obj. i am able to view the data in the psa but when i try to view the data in the infoobject its not der.
    plz help me out
    Thank & Regards
    KK

    Since you are using BI 7 for the first time., I hope you have executed the DTP after executing the infopackage.
    In BW 3.5 we can load date from data source to Infoobject via PSA in one shot.
    But In BI 7, we have to execute the infopackage first . This loads data from Datasource to PSA. Then you need to execute the DTP. Just double click on the DTP. You can see the execute in the third tab. When you execute the DTP, data will be further loaded from PSA to Infoobject.

  • To load master data into infoobject 0mat_unit

    Hi Experts,
    Cud you pls give me any idea to load master data into infoject 0mat_unit from R/3.
    We need more than 10,000 master data into 0mat_unit. How can I collect data from R/3 for different attributes of infoobject 0mat_unit?
    I will assign full points for suitable solution.
    Thanks in advance!
    Sapna

    Hi Sapna,
    See
    <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm">DataSource in the SAP Source System</a>
    Udo

  • While loading master data to infoobject Load failed due to Duplicate record

    Hi Experts,
    While loading master data to the infoobject load failed .
    The error it is showing is 24 Duplicate record found. 23 recordings used in table.
    Pls help me to solve this issue
    Thanks in Advance.
    Regards,
    Gopal.

    In infopackage settings u will find a checkbox for 'delete duplicate records'.
    I think it appears beside the radio button for 'To PSA',and also tick checkbox for 'subsequent update to data targets'.
    This will remove the duplicate records(if any) from the PSA before they are processed further by transfer and update rules.
    Use this and reload master data.
    cheers,
    Vishvesh

  • Not getting Text data of Infoobject

    Hello everyone
    For Infoobject 0BP_MEDIA we are using infopackage
    0BPARTNER_TEXT for text . But we are getting data upto psa but not in theText table /BI0/TBP_MEDIA ( of Master Tab of Infobject ) . Because of this in Bex we are not getting names of the customer . We are using standard content for the infoobject 0BP_MEDIA . We want the data with name of the customer . Please suggest a solution .
    Regards
    Nilesh Vakil

    Hi,
    I think you are using below settings in "processing" tab :
    "Only PSA" check marked with
    "Update subsequently into data targets"
    and this text load is happening via PROCESS CHAIN.
    If I am not wrong please verify weather you have two processes in process chain as mentioned below :
    1) Execute Info package
    2) Read PSA and update into subsequent data target.
    I think the 2nd process is not there in your process chain.
    So you will have to include that in process chain.
    Thanks,
    Mihir

  • Data in infoobject not showing in report

    Hi,
    I have this situation. I can see cost center number in variable screen but the number is not showing when I run the report.
    thanks

    Hi,
    I would suggest you try to see if the data is being populated in the cube for the particualr infoobject.If it is not populated in the cube itself,then check the filters inthe start routine,transfer & Update Routines. If its populating the data then,try to run the query on the same selection criteria and verfiy.This way you can confirm if its the loading into the dataprovider or on the front end that needs to be fixed.
    hope it helps

  • Load data to infoobject master text from csv

    Dear Experts
    I have infoobject master,
    and in tab master data/text, I thick :
    - short text,
    - medium text
    - text languange dependent
    now, I want load data from csv to the infoobject master text
    how many columns i must set in my csv ?
    must I set languange column and record number column ?
    really appreciate your help
    Best Regards
    Jeiming

    hi,
       the easy way is to create direct update infosurce and then the transfer rules  on the text.
    the system will automatically create thwe transfer rules with the fields and then u can use for for dataload.
    in general u can go to text table and see the fields required.
    u have to include all fields in text table in tr.
    regards

  • Loading master data compounded infoobject

    Hello experts
    I want to load master data into an InfoObject from a flat file, thus i want to define this infoobject as an infoprovider
    In order to do that i use the "Insert characteristic as InfoProvider" option from the InfoArea but i get a message :
    InfoObject PA_PAPRCT is not a basis characteristic; not used as data target
    This InfoObject has a superior InfoObject defined as superior InfoObject in the compounding tab, is that the problem ?
    Thanks for your help and happy new year
    Thibault

    Dear Thibault
    Yes, PA_PAPRCT is not the basic characteristic.
    Instead of this, use the superior object for this object.
    Than you can load the master data for all these objects.
    Hope now you will get the idea
    Regards
    Saravanan.ar

  • How to delete master data from InfoObject

    Hello,
    Can anyone give me an advice for the following problem :
    160 employees have been deleted from R/3 but still exist in BW.
    I am searching a way to delete them in BW but I have the following problem :
    - selective deletion in InfoCubes and ODS is OK
    - when I try to delete them in 0EMPLOYEE , I received the message
    "master data xxxxxxxx (SID xxxxxxxx) is used in BI0/QPERSON and therefore can't be deleted.
    The reason is that 0PERSON is an attribute of 0EMPLOYEE and vice versa.
    No records in R/3 exist for those employee.
    Any idea how can I delete them in BW in 0EMPLOYEE and 0PERSON ?
    Thanks for your help,
    IE

    Hi Ingrid,
    1. delete the data from all infocubes and ODS's, where the infoobject is available.
    then the masterdata isn't in use. all SID's should be deleted from the dimension tables.
    Now you can delete the masterdata with the AdminWorkbench.
    2. delete the employees from 0EMPLOYEE.
    3. delete the employees from 0PERSON.
    you can also try the function: archive.
    Sven

  • Problems with maintaining master data for infoobject 0SOLD_TO

    Hello experts,
    I'm not getting 'maintain master dada' option when I right click on the infoobject 0SOLD_TO. The data is already there from pervious data loads (from R/3 systems) and is visible in the reports. I'm using this infoobject in cube 0SD_C05 to report quotation/order details. Am I missing something here? Please guide.
    Thanks
    Sumit

    Hi Sumit,
    It looks you have asked your question in a wrong forum.
    Please use BI forum to post your question.
    Regards,
    Pooja

  • Data at infoobject didnt show up at report

    Hi all expert,
    Im running a report at BW. But missing one record.
    When i check at PSA, it show the data in the infoobject.
    So can i know got any way i wan rectify this problem and solve.
    thanks for help.

    Hi,
    check for the existence of the record in the info provider.
    In particular, identify the record thats present in PSA is loaded succesfully to info provider.
    If the records is present in infoprovider, then check for any filters, restrictions mentioned in the report that may be probable cause for holding the record back from displaying in the report.
    Naveen.A

  • How to transfer data to infoobject?

    Hi:
    who can tell me step by step how to transfer dato to a infoobject with bw7.0 dtp?
    addition,with bw3.5 method i can!
    thanks a lot!

    Hi Baofei hu,
    In BI-7 with the help of Infopackagewe can load data from sorce system to PSA.and with the help of transfomations and DTP data can be transfered from PSA to Infoobject.
    ->First select the data source and click on green check mark
    ->Create Infopackage for this data source
    ->Execute Infopackage(now data goes from sorce system to PSA)
    ->Now we need to create transformations for this data source
    ->right click on data source select create transformations and give the data target name map the transformations and activate the transformation object.
    ->select the Infoobject ->right click->select DTP
    ->select the green check mark and activate DTP.
    ->From the execute tab click on execute
    Siri

Maybe you are looking for