Data in LIS Structures (MCVBAK & MCVBAP)

Hi
In Standard SAP, Sales Orders data is copied to tables: VBAK & VBAP. Parallally data copied to structures MCVBAK & MCVBAP for LIS(Logistics Information System).
Report from VBAK is mismatching with LIS report.
Please tell me, how to see the data in structures: MCVBAK & MCVBAP or where this LIS data saves.
Regards
Uma

this will be difficult to accomplish, since data in LIS are -like you already recognized- without any document numbers ... the data there are compressed (like they would be in BI). so what you actually can do is, set up a sandbox system, drop the content of your custom-made table using SE14 and do a test by adding a sales order that would match the criteria to put that order into your LIS table. compare values between LIS and the document. add a couple of more orders to see whether there's a bug in summing up values or a formula or something of that inkling.
if your test shows that the data are the same in both, document and LIS there might have been an earlier error (maybe some V2-posting that did go awry?), so the only thing you would have to do is, rebuild the data of that table completely. again: search service.sap.com/notes on the how-to.
if your test shows that the LIS data differ from the ones in the document, you will have to do further R&D - analyzing the structure, the rules etc ...
please note another thing: most LIS-structures are time-dependent, meaning: that order you are talking about, could have been 'open' in the period you selected on the first screen after calling transaction MCSI. in that case, LIS will show that order as 'open' while VA05N would show you the actual state of the order this very moment - and that might be different.

Similar Messages

How to delete data in LIS Structure S855

HI All :
I am new to this portal. I would like to know how
to delete data in LIS Structure S855. Actually, this table contains errorneous data and like to clear it up and run stats setup to refill it up.
Though we have T-Code:lbwg to delete setup tables for LO.
Likewise do we have any transaction to delete LIS table.
If not, how to delete the same.
Thanx & Regards:
Rafi

hi roberto,
this is nataraj.i am really a novice.i have gone through this discussion.since lis s855.its kind of table.can we delete like a table using debugging?hope u have got me.correct me if am wrong.
i will be waiting for your feedback.
regards,
nataraj.

Error in the data in Standard LIS structure S282

Hi Guys,
I need some advice on the following issue :
1.I have a process order that has fields Planned quantity and Withdrawal quantity.
2.Now, this data is getting passed into standard LIS structure S282.
But, in S282, I see that the values of the 2 fields have exactly doubled for the same Order..( which is in turn gettin pulled into BW )
Can anybody please let me know how do I go ahead for having the right value in S282??/
Thanks,
Punkuj

There is nothing wrong with the TID's or anything like that. There is also no selection criteria in the infopackage.
When the Delta fails, the error occurs under EXTRACTION in the monitor. It seems to be successful under TRANSFER and PROCESSING in the monitor, which I find strange. Also, I run a new Delta Init with Data Transfer, and that works just fine.
So, I'm not sure what it could be?

How to update order of Characterstics in LIS structure?

Hi.
Hi.
We have added an additional key figure to a custom LIS structure after it was created. Before the update the characteristics were in the following order:
Client
Period
Characteristic 1
Characteristic 2
Version
Month
Date
Week
Stat(s) source
Key Figure 1
Key Figure 2
After the update we clicked the generate button to activate the updated structure. Now the order is:
Client
Stat(s) source.
Version
Period
Month
Date
Week
Characteristic 1
Characteristic 2
Key Figure 1
Key Figure 2
Key Figure 3
Do you have any solution on how to re-arrange the key figures?
Thanks
Anke

Hi Warwick.
Oops, sorry for the typo.
I am not tryin to reorder he keyfigures, but the characteristics:
From
Stat(s) source.
Version
Period
Month
Date
Week
Characteristic 1
Characteristic 2
To
Stat(s) source.
Version
Characteristic 1
Characteristic 2
Period
Month
Date
Week
Thanks
Anke

Updating previous data for LIS Infostructure

Hi,
Initially LIS statstics update Indicator is not set for Process Order Types in our systems, But now I have activativated this, but it is updating only data from current date.
Is there any procedure to update past data in LIS Info structures.i.e what are Infostructures to be updated and what is transaction code for same.

Dear,
Please refer this link,
[Past Data not updting in Info structure |Past Data not updting in Info structure]
Regards,
R.Brahmankar

LIS Extraktion to BW - selfdefined LIS structures

Hi, I found several documents about activation of content LIS structures and the process of extracting these structures into BW.
In our case we defined a new LIS structure, loaded it with datas and now we want to extract this data to BW. Now my question: what do I have to do or customize in R/3 to create a data source for loading BW?
Hope to get usefull information.
Regrads
Mirjam

Hi
See this thread
LIS EXTRACTION STEP BY STEP
Follow step by step
Regards
N Ganesh

LIS structure in a converted unicode system

Hello all,
We are in the process of converting to unicode. We have successfully created a unicode test system and converted our data and programs. We have set the unicode flag on most of our "Z" programs and for the most part things are working well. However, we are getting the following error:
In program "RMCX0002 ", the following syntax error occurred
in the Include "RMCX0002 " in line 0:
"The program "RMCX0002" is not Unicode-compatible, according to its program attributes."
It looks to me like RMCX0002 is a generated program from an LIS Info-structure.(whatever that is???) The documentation block looks like this:
*   Generated report for statistics update LIS                         *
*   Info-Structure: S510                                               *
*   Update group..: 000001                                             *
*   DDIC-Structure: S510                                               *
*   Client........: 000                                                *
*   Author........: DDIC                                               *
*   Date..........: 07.07.2002 08:21:36                                *
*   Do not change this report !                                        *
When looking at the attributes of the program I see that, indeed, the unicode attribute is not set. However, I am reluctant to set this flag myself due to it being a SAP generated program.
Is there a way to get this attribute set by regenerating these LIS structures or something like that? If so, how do I do that? and does it need to be in a unicode system, or can we do it in our non-unicode DEV system and transport it to the unicode system?
BTW, I have no idea what an LIS structure is or what is used for. I just know it's not working in our unicode system.
Thanks,
Larry Browning
ABAP developer
Baldor Electric Co.
Message was edited by:
        Larry Browning

I have a similar issue. And I was told that if I regenerated the infostructure in MC25 it will solve the dump. And it did.
Now what I want to know is how did the regeneration solved the unicode issue for the RMCX* update program of an infostruc? I read before regeneration updates the infostructures with the latest numbers to be used by the BW.
I'd like to know how the infostruc regeneration and unicoding the update program are connected.
Thanks!

Find report with particular LIS structure, e.g. S130

Hi! I am not familiar with LIS. I have data in this structure S130 but I do not know what report runs off this structure. Can someone please advise?
Cheers!
SF

Transaction WR60 and WRMO
from search_sap_menu transaction the path (read from bottom to top)
Nodes              WR60                Replenishment: Parameter Overview
Preceding node                         Warehouse Replenishment
Preceding node                         Retail
Preceding node                         Logistics - General
Preceding node                         General Report Selection
Preceding node                         Information Systems
Nodes              WRMO                Replenishment Monitor
Preceding node                         Warehouse Replenishment
Preceding node                         Retail
Preceding node                         Logistics - General
Preceding node                         General Report Selection
Preceding node                         Information Systems

LIS Structure - Changing Update Rules

We have just changed from using the normal Julian Calendar to a 445 Fiscal Calendar. I have two Self defined LIS structures that I need to change from monthly updating to FY variant updating. I know that all data will be lost when we make this change.
I have made the change in our sandbox environment. When adding manual quantites to the structure using MC94 the monthly buckets are still displayed, however the automatic updating is using the FY buckets. The table now contains manual data in monthly buckets and auto updated data in Fiscal buckets.
How do I change the table for manual data entry to the FY variant?
Thank you for any help you can give.
Kathy

No answers so I am closing

Statiscal Updation of LIS Structure S026

Hi Experts
I have an issue of statistical updation of LIS structure S026.
With reference to SAP Note 64636, i have done the statiscal updation in OLI4 Transaction and saved the updates in different version.
Now i need to update the standard SAP version '000' from the version which i have generated.
Please tell me the step by step procedure to do the same. There are 2 procedures given in the note 64636, which is the best one to be followed?
Thanks & Regards
Bala

Hi,
In the SAP not itself the details will be there. I think the first solution would be good. You need not down your system, through online you can do this if the data is very less in the table.
This is to correct the data inconsistency. Copying the active version in to inactive version and delete the active version and again copy the inactive version in to active version.
Regards,
V. Suresh

How to extract data from a structure?(Data Dictionary)

Hi all,
       This is regarding extracting data from a structure.
For Eg:if we want to extract data from a structure ADDR1_DATA,How will we do that in report programming?Structures on its own has no existence unless it s attached to a database table or view.when am using 'Where used List' on that structure also I am not getting any database tables or views.What can I do about this?
Thanking you,
anjaly

HI Anjaly,
as you said structure does not have any value .. unless something is added to it..
So just use the structure to define the type of the sttructure you want..
Or to include it in your itab like..
data : Begin of itab occurs 0.
       include structure ADDR1_DATA.
data i type i.
       end of itab.
you cannot directly extract data from the structure ADDR1_DATA..
regards
satesh

How to extract data from a structure?

I want to get the data KWERT from structure KOMV.
is there a way to do this? thanks..

Hello,
U can't get data from the structure.
Find out the dataelement of the field KWERT and search for where used list.It will list number of tables from which u can find out the table from which can fetch the data of the field KWERT.
Don't forget to award points.#
Regards,
Vasanth

How do i get data from a structure using join?

hi,
what is the actual use of a structure.?
my problem is :
KUAGV is an existing STRUCTURE. it has got one fields each which links to MARA, AND VBKD tables. i want to fetch all related information from KUAGV, mara, vbkd . which is the better way : using joins or views or anything else? how do i
get data from a structure using join?

structure temporarily holds any data passed to it dynamically throughout the runtime but doesnot store it permanently. so
a structure cannot be included in a join.so instead of incuding structure KUAGV's field in a join
search the transparent table in which same field are present and use it in join.
A structure if created in DDIC(Data Dictionary) is a global DATA STRUCTURE which is used to group related information, for example you would group all the details of your bank account into a structure BANK_ACCOUNT that contains fields like account_Id, account_holder_name etc.
If you create a structure in your program then it is local to your program. So you use this structure to create data holders of this DATA TYPE to hold data in your program.
Edited by: suja thomas on Feb 11, 2008 6:24 AM
Edited by: suja thomas on Feb 11, 2008 6:31 AM

Get the data from a structure not a transparent table

Hello masters, does anyone knows how to retrieve data from a structure?

Structures do not contain data, they are mearly a way to describe it and are usually used in screen programming to collect data into which come from transparent tables. For example, lets say you have data from two tables that need to be displayed on a screen, the data is related, so a good programming practice is to use a structure either described internally in the program, or in the ABAP dictionary. Then in the program, you retrieve the data from the transpart tables and move the data to the structure fields, these structure fields are then defined within the screen.
Anyway, when you do F1 help on a field in a screen, and it is says that it is part of a structure, then this is becasue the structure is being used to group these fields into a common container when doing the screen programming, so it is a little trickier to find where the data is coming from, but not impossible. One way is to use the ST05 to do a SQL trace on the program, this will tell you the tables being hit, and you can find the data that way. Another way, is to debug the program, and see where the data is coming from.
Regards,
Rich Heilman

How to display the data of a structure in a report

i want to display the data of a structure resbd.
i know it does not have data.
but it contains data at runtime
plz help
thanx

Hi,
For displaying the data of a structure you can use the write statement.
WRITE : structurename - fieldname.
eg : write : resbd-rsnum.
Before that you need to declare the structure name inside the report.
Please refer the following code for your querry
REPORT ZSTRUCTDATA .
Table Declaration
tables : resbd.
Assigning Values to Structure Fields
resbd-rsnum = 1234.
resbd-rspos = 12.
Displaying Values
write : / resbd-rsnum.
write : / resbd-rspos.
This report will give the output like this.
0000001234
0012
Regards,
LIJO JOHN.

Data in LIS Structures (MCVBAK & MCVBAP)

Similar Messages

Maybe you are looking for