Data in ODS, Info cube ans Multiprovider(List cube) are in Sync.

Hi,
My query is built on multiprovider. The data flow is data source u2013 ODS then ODS u2013 Info cube and multiprovider contains Info cube only.
Data in ODS, Info cube ans Multiprovider(List cube) are in Sync.
The query results are not tie up ODS, Info cube ans Multiprovider(List cube).
Any one let me know why this is happening and how do I resolve it.
Regards,
Sharma.

HI;
thanks for help.
I resolved the issue in my own.
Regards,
Sharma.

Similar Messages

How can I transfer old Palm Pilot (Z22) info (calendar/to do lists/memos/contacts is synced to a Windows XP) to a program I can access with an iPod?

How can I transfer old Palm Pilot (Z22) info (calendar/to do lists/memos/contacts is synced to a Windows XP) to a program I can access with an iPod? Thanks.

Maybe by the link provided here:
Palm Desktop and iPhone

Reloading of deleted data from ODS to cube

i have deleted the data from the cube using selective option in the cube. Now i want to reload the deleted data. Since i have data in ODS i am loading it into cube. But it is doing a full update which i don't need. I wanted only the deleted data to be reloaded from ODS. Since i have some routines and rules in the cube. i am deleting the cube and reloading the data. Could anyone suggest

Hi Pooja.........
R u aware of it that which value u hav deleted................if u know that..........then run full IP with selection......In the Data Selection tab u give the selection........provided that field is included in the Data selection tab..........if not and if u hav authorization........then u can go to RSO2.....in the source system....Give the datasource name.........go to change mode .........Check the selection box for that field.......then activate the datasource............again replicate it.............then Activate the transfer rule using the program : RS_TRANSTRU_ACTIVATE_ALL.........
Then that field will be available there for selection..............But do this if it is must to do the load in this way..............
Hope this helps......
Regards,
Debjani.......

Load data from ODS 3.5 to Info Cube 7.0 ?

Hi BI Experts
I am new to BI 7.0 , my requirement is i want to load the data from ODS 3.5 to Info Cube 7.0
Is this Possible to load from old version to new version?
If Possible please let me the steps
Thanks in advance

Hi there,
ODS 3.5 is just like DSO 7.0 and InfoCube 7.0 is just like InfoCube 3.5
So you can still use the old fashion 3.5 mode with InfoSource, update rules, transfer rules and InfoPackage to the InfoCube, or you can now use a transformation with DTP
Diogo.

Can we add new cubes and ODS after creating the multiprovider?

Hi all,
i created a multiprovider on a cube and ODS. Now i needed one more charactersitic from other cube.then i did change multiprovider and then add that new cube and did the identification, and adjusted the query, when i ran the query it is showing chracteristic as # and not assigned. I even tried bringing in 0infoprovider object to see whether data is coming from third infoprovider, it is not showing up any data from third one. i tried logging out of bex and logging back in.....but still no use..............i am wondering now, once a multiprovider is created can new infoprovider be added to it ?
i am even able to see the new key figures and chracteristic in my query.but data is not getting populated...i also checked and found that the data is available in the infoproviders....
plz help me out..
points will be assigned for inputs

Hi Bhanu,
nice to see your answer, I saw a lot of helpful posts on SDN by you.
I did the RSRT with debug multiprovider, it said,
0FISCPER: General restriction for InfoProvider ZSD_C12 not possible
Access to ZSD_C12 was excluded
now i corrected it, it is populating the key figure now but not the chracteristic still.....the chracteristic is still getting value only from one of the info providers
importantly, when i bring infoprovider above the keyfigures space on query, it still only shows two info providers for each key figure and not the third one ,the key figure coming the third one is only shown in overall result. how can i solve this?
i tried rsr_gen_direct_all_queries as told by krian, but still cant get the data in the report. i did list cube on mulitiprovider and i see the data for that chracteristic there....
are there any other options in RSRT to find possible setting faults....
thanks in advance
points will be assigned for inputs

Uploading data in to info cube.

Hi
I am new to APO. I was able to create infocube and all that stuff. but was not able to upload data in to info cube,
Can some one explain me the process of uploading data in to info cube.
Regards
Deepu

HI Deepu
There could a lot of reasons why the data is not getting loaded in the info cube. It all depeds what type of data source is being used to load the data. That is are you trying to load the data through a flat file or you are using another info provider (info cube, ODS, etc) to load the data in your info cube.
For example, if it is a flat file, you may want to check if the format of the file is correct or you could preview the data before you upload the entire file, etc
If you are loading it from an another info provider, then you could first try and load the same in the PSA and see if the data is loaded in the PSA properly.
So if you can describe the error that you are getting while you upload data, it wil be more clearer. Also if you can add a little bit of architecture of what are trying to build, it will be better to give pointers.
In the meantime, the process of uploading data into the info cube is that first you have to create a data source depending upon your source system. Then you may create a info source, transfer structure and communicattion structure. Then you create the info provider (in your case the info cube), then create the update rules and then the info package finally to load the data.
I hope this helps.
Rgds, Sandeep

How to ensure data from ods to cube are correct or not

hi all,
i am just trying to get data from ods to cube. how to make ensure that the records that i fetched from ods to the respective cube are correct and number of records are the same.
thanxs in advance
regds
hari

Dear Hari,
There are two ways of confirming correct loads:
1. Level by Level Analysis
2. Comparision with Virtual InfoProvider
First method is by analysing data at each level. First at Database Table (if loading from R/3) or Excel (if loading from flatfile), then at extraction level (See data at RSA 3, not possible with flatfile). After this load data to BW through PSA and check the content of PSA. After that load it to Infoprovider and varify there.
Second method is to create a Virtual Infocube on the datasource (extract exact data through FM). And create a multiprovider by combining this Virtual cube and original Cube. Then create a Query with calculated key figures as difference of each key figures from two cubes. This way you can say that which value is not matching.
I suggest you the first method, but the standard way would be second one at highly critical loads where you cannot match huge ammount of data.
Hope it helps...
Regards,

Saving the data from two info path forms in to a single list in share point 2010

Hi ,
I have two info path forms are in share point page FM 1 and FM 2.
In FM 1 I am getting data from lists by using drop down and casket drop down and FM 2 i need to enter manually after entering
i want to save both forms information(FM 1 & FM 2 ) in to a single list of share point 2010
If any knows the solution please reply me
Thanking You,
Arun Darly

Hi，
Based on your description, my understanding is that you want to save the data from two info path forms in to a single list in share point 2010.
We can't save the data from two info path forms in to a single list, but we can
save the data from two info path forms in to a single library.
Open the FM 1 and FM 2 in Infopath(you have save it Locally once).
Publish the FM 1 and FM 2 as content types named FM 1 and FM 2.
Add the content types FM 1 and FM 2 into a document library, Then you can save the data
from two info path forms in to a single library.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Error in updating data from ODS to CUBE.

Hi,
I am tryin to load data manually from ODS to CUBE in NW2004s.
This is a flat file load from the datasource to the ODS and then from the ODS to the CUBE.
In the CUBE, I am trying to populate fields by using the ODS fields.
For eg.
In the ODS, a CHAR Infoobject has the data in the timestamp format(i.e. mm/dd/yyyy hh:mm ). I need to split this data and assign them to the two individual DATE and TIME Infoobject in the CUBE.
For this, I have done the coding in the Transfer Structure in the Rule Group.
The time field is gettin populated , but the date field is not getting populated.
I get an error as Eg:
Value '04052007' for CHAR 0DATE is not plausible
Due to this, the corresponding records is not getting displayed
Also, the records where the time id displayed, the date is not getting displayed inspite of the date being correct.
Please help me with a solution for this.
REMOVED
Thanks In Advance.
Hitesh Shetty

Hello Hitesh
SAP accepts the date format in YYYYMMDD, so in the routine where you have concatenate the day month year...just do it in reverse order.....
Thanks
Tripple k

Error while uploading data from ODS to Cube

Hi All,
Will you please help out this issue.As this is a priority high issue,please reply if you know the answers.
I am facing an error while loading the data from ODS to CUBE,the error
is
1.Name is not in the namespace for generated BW Metaobjects
2.Error 18 in the update
And this error is occuring only in quality server.
Thanks,
Ram.

HI RAM SIVA,
make sure that the Data source is replicated and tranfer rules r active.
And also check whether the all transport requests r imported properly.
hope it helps
bhaskar

Error while loading data from ODS to CUBE.

Hi friends,
When l am loading data from ODS to Cube with help of data mart, I am getting error in QA system , IN DM system ,every thing went well.IF i see the detail tab in monitor under Processing .
Its is showing like this .
Transfer Rules : Missing Massage.
Update PSA : missing massage.
Processing end : missing message.
I have checked the coding in update rules, everything is ok.
Plz any inputs.
hari
Message was edited by:
hari reddy

Might means that IDocs flow is not defined properly in your QA system for myself-SourceSystem.
Regards,
Vitaliy

How to Load data in remodeled info provider(Info cube) ?

I have added one key figure in existing cube by using remodeling process.
I changed the transformation rule and reloaded the data but the new key figure is still showing value as 0.
Can anyone please explain complete step by step process of loading data in remodeled info cube.
I am new to SAP BW. please help me to sort out this issue.
thanx

Hi,
After adding the key figure, use one of the following options to populate data.
1. Constant: To populate constant data for new key figure.
2. User Exit: To populate data from different source.
For replacing the key figure, use the following option to populate data.
Customer Exit: To populate data for the replaced key figure.
There is a very nice Blog on this.
/people/mallikarjuna.reddy7/blog/2007/02/06/remodeling-in-nw-bi-2004s
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/008f9fef-22e4-2a10-d994-a17c55ca06f0
Hope this helps.
-Vikram

Error when trying to load data from ODS to CUBE

hi,
Iam getting a short dump when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.

Hi,
Check this thread.........Ajeet Singh has given a good solution here.........
Re: Error With Data Load-Getting Canceled Right Away
Also check SAP note: 382480..................for ur reference............
Symptom
A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
Data type "TXW_INDEX" was found in a newer version than required.
The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
Additional key words
RTXWCF01, LTXW2U01, TXW_INDEX
Cause and prerequisites
This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
Solution
If possible, avoid running DART extractions in parallel.
If you do plan to run such jobs in parallel, please consider the following points:
In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
Run parallel DART jobs on different application servers.
As an alternative, please apply note 400195.
It may help u.........
Regards,
Debjani.......

Record increased when sending data from ODS to cube

Hello experts,
when i am sending data from ODS - CUBE i am sending 20 records of full update but in my cube i
am able to see 200 records, in those records i am getting the old records.Everytime i load the data i am getting the same problem its fetching all the old records.Please suggest me what to do inorder to reslove this problem.
Thanks alot,
Komal.

Hi,
TO delete the PSA Table record details follow these steps,
Right click your ODS/CUBE and choose "Show dataflow diagram" on right side panel click "Techincal Settings" ON and you can get your PSA table name. Type this table name in SE11 and delete your records.
OR
IN RSA1 --> PSA choose your infosource and choose PSA and right click and choose delete PSA data.
Hope it helps
Regards,
Arun.M.D

Tables holding Data related to selection conditions of each loadin cube,ODS

Hello Experts,
Hope you are all are doing Good!.
I am looking for a way to check the selection conditions of each load in cube & ods through an ABAP program.
For Eg: we load cubes with selection conditions with (created on date -1 ) and i want to check whether there are all loads for all days....can we do this with abap code right...
Can u pls help with the related tables i can look for this data...
Thanks in advance!!!

Hi,
check this table for selection criteria:
RSLDPSEL and RSSELDONE
thnks.
Edited by: Sakthi Jaganathan on Jun 18, 2009 4:20 PM

Data in ODS, Info cube ans Multiprovider(List cube) are in Sync.

Similar Messages

Maybe you are looking for