Data in ODS is not activating

We have an issue where in the data which is coming from crm is Ok upto certain stage.But after certain stage the data which is cming to the ODS is not getting activated. we could find that there is an unwanted charater in the PSA.
SO here my question is If there is error in PSA itself how the data is mooved to ODS NEw data table.?

Hi,
<i>If there is error in PSA itself how the data is mooved to ODS NEw data table.? </i>
Yes even if there is an error in PSA it will move to ods table.But it wont allow u get activate it. So u need to delete the data . And then u have  re load it frm psa by removing spl char.
Hope now its clear.
Urs,
RK.
Assign Points if its useful!!!!

Similar Messages

  • Node display off , Central data cache configured but not active

    Hi
    We get an error "Node display off , Central data cache configured but not active" in Central system while trying to display the monitored the abap instance of system.We just completed the CCMS configuration.
    we are getting this error in RZ20 (central system)
    Agent regristration is complete in monitored system and it is running fine.connection from central to monitored (abap instance) system is also ok.Please help asap.
    Operating System --AIX
    Sap version--ECC 6
    Database-db2
    Regards
    Shashi

    Hi,
    central data cache to improve the performance of the Alert Monitor when creating the alert monitoring trees.
    Check [This link|http://help.sap.com/saphelp_sm32/helpdata/en/de/13622d770b5e4f8398fc536b690e93/content.htm]
    And [This link|http://help.sap.com/saphelp_sm32/helpdata/en/10/75ea3b6d73e807e10000000a11402f/content.htm]
    Hope this solves your problem.
    Feel free to revert back.
    --Ragu

  • Node display off ,  Central data cache configured but not active while tryi

    Hi
    We get an error "Node display off ,  Central data cache configured but not active" in Central system while trying to display the monitored the abap instance of system.We just completed the CCMS configuration.
    Agent regristration is complete in monitored system and it is running fine.connection from central to monitored (abap instance) system is also ok.Please help asap.
    Operating System --AIX
    Sap version--ECC 6
    Database-db2
    Regards
    Chamba Shashi
    Edited by: SHASHI SAMAL on Apr 28, 2009 6:25 AM

    Hi,
    central data cache to improve the performance of the Alert Monitor when creating the alert monitoring trees.
    Check [This link|http://help.sap.com/saphelp_sm32/helpdata/en/de/13622d770b5e4f8398fc536b690e93/content.htm]
    And [This link|http://help.sap.com/saphelp_sm32/helpdata/en/10/75ea3b6d73e807e10000000a11402f/content.htm]
    Hope this solves your problem.
    Feel free to revert back.
    --Ragu

  • Central data cache configured but not active

    Hi,
    I am currently at a customer site and am configuring the solution manager system as a CEN.
    The sapccm4x en ccmsr agents have been registered and memory has been allocated in the CEN system for the central data cache, but whenever I open a monitor the following message is listed at the top of the screen:
    Central data cache configured but not active
    Suggestions on how to configure this cache and the impact of not doing so will be rewarded.
    Regards,
    Sander

    Hi,
    central data cache to improve the performance of the Alert Monitor when creating the alert monitoring trees.
    Check [This link|http://help.sap.com/saphelp_sm32/helpdata/en/de/13622d770b5e4f8398fc536b690e93/content.htm]
    And [This link|http://help.sap.com/saphelp_sm32/helpdata/en/10/75ea3b6d73e807e10000000a11402f/content.htm]
    Hope this solves your problem.
    Feel free to revert back.
    --Ragu

  • Run NXtest will get a Warning will appear saying that Data Execution Protection is not activated in Win8.1 OS.

    Hi I'm Notebook SW compatibility engineer. When We test NXtest function has some question need your feedback.<o:p></o:p>
    Step as below<o:p></o:p>
    Open System Properties | Advanced | Performance Options | Data Execution Prevention. 
    Set the Option to 'Use DEP for essential Windows programs and services only' 
    Then run NXTEST tool will get a Warning will appear saying that Data Execution Protection is not activated in Win8.1 OS. 
    Can you help to confirm this result is correct or not? <o:p></o:p>
    Thanks and wait your feedback~~

    Hi Thanks
    I can see "Your
    computer's processor supports hardware-based DEP." as your attached picture.

  • Do webpages sitting on safari use data when safari is not active?

    So if you have www.apple.com and www.iphone.com both open on safari for the Iphone4, if I hit the home button and go else where, never to open safari again, will those webpages still be using datatransfer from my data plan?

    Hi,
    After system copy, if the post processing acivities were not performed properly, few of the objects will get deactivated either in your quality or production system. Check these things and contact your basis whether they have taken care all the post processing activities of the system copy.
    There could be several reasons like SID determination if the settings for Reporting are enabled.
    Also check the job activation of DSO in SM37.
    Regards,
    KK.

  • Find ODS's with data that is not activated

    Hello,
    Does anyone know a systematic way to find ODS objects containing data loads that are not activated?
    we are working on a system upgrade and this is one thing that we have been asked to identify.
    Thanks,
    Nick

    Hello,
    I found something that will work.
    In RSA1 I clicked on the 'Modelling' tab in the left pane.
    I then clicked on the 'Status Overview' and I was able to review the ODS's there.
    Thanks,
    Nick

  • Activating Data in ODS

    Hi
    I have got one ODS, for which my infopackage is desigen as do not update data if no master data exists for a characteristic.
    But one of my request which is having only the entries in master data, is not getting activated in ODS.Its failing with the error "No SID found for value '00DU023R ' of characteristic 0MATERIAL". but the material 00DU023R is not there in the request at all.
    Doest anyone phased this scenario before? how to activate the data in ODS?
    Regards
    Sriram

    Hi Sriram,
    What SSree is trying to see.
    Go to your ODS, right click manage.
    In the requests tab, choose a very old date and choose refresh.  Now check if you see any red requests.  These requests will prevent from activating.
    On the other hand, when I see your first error, I would go to transaction RSRV, and do some consistency checks on your ODS and master data.
    kr,
    Tom

  • Error while activating ODS is not caught in the back ground job..

    Hi All,
    We have a back ground job to load data to ODS and to activate it..If there is any error while loading or activating the data, back ground job is going into loop instead of cancelling the job..As the job is going into loop we are unable to trace the error unless we cancel the job manually and checking it..We have switched off displaying any messages while doing the back ground job...also we can not set any time limit for the job as it always depends on the volume of the data.
    My requirement is , back ground job must get cancelled if there is any error while loading the ODS..Can anybody suggest any idea on this..
    Thanks for reading.
    Umamaheswar kumar

    Hi Uma,
    A few hints for running and schedule and monitoring process chains:
    - always schedule the process chain in tcode RSPC
    - check the log in RSPC for error messages, or
    - check BW monitor for the ODS concerned (tcode RSMO, tab Details)
    if anything is not working fine, the status of the corresponding load will show you the errors, warnings ...
    either in RSPC - log or RSMO.
    hope it helps.
    Regards,
    Lilly

  • DBIF_REPO_SQL_ERROR short dumps while activating data in ODS

    Hi All,
    We are using BW3.5 with Oracle 9.2 on AIX 5.3 box, from the past few days we are getting DBIF_REPO_SQL_ERROR short dumps frequently while activating data in ODS.
    Runtime Error          DBIF_REPO_SQL_ERROR
    Date and Time          08.01.2008 13:01:08
         1. A printout of the problem description (short dump)
            To obtain this, select in the current display "System->List->
            Save->Local File (unconverted)".
         2. A suitable printout of the system log
            To obtain this, call the system log through transaction SM21.
            Limit the time interval to 10 minutes before and 5 minutes
            after the short dump. In the display, then select the function
            "System->List->Save->Local File (unconverted)".
         3. If the programs are your own programs or modified SAP programs,
            supply the source code.
            To do this, select the Editor function "Further Utilities->
            Upload/Download->Download".
         4. Details regarding the conditions under which the error occurred
            or which actions and input led to the error.
         Internal call code.........: "[REPO/*/43/LOAD/CX_SY_OPEN_SQL_DB=============CP
         Please check the entries in the system log (Transaction SM21).
         You may able to find an interim solution to the problem
         in the SAP note system. If you have access to the note system yourself,
         use the following search criteria:
         "DBIF_REPO_SQL_ERROR" C
         "SAPLRSSM_PROCESS" or "LRSSM_PROCESSF04"
         "CHECK_IF_ANALYZE_IS_NESSESSARY"
    System environment
        SAP Release.............. "640"
        Application server....... "psapdb"
        Network address.......... "158.58.65.11"
        Operating system......... "AIX"
        Release.................. "5.3"
        Hardware type............ "00CD615C4C00"
        Character length......... 16 Bits
        Pointer length........... 64 Bits
        Work process number...... 22
        Short dump setting....... "full"
        Database server.......... "psapdb"
        Database type............ "ORACLE"
        Database name............ "BWP"
        Database owner........... "SAPBWP"
        Character set............ "C"
        SAP kernel............... "640"
        Created on............... "Oct 29 2006 20:49:57"
        Created in............... "AIX 1 5 00538A4A4C00"
        Database version......... "OCI_920 "
        Patch level.............. "155"
        Patch text............... " "
        Supported environment....
        Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
         10.2.0.."
        SAP database version..... "640"
    Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
    Memory usage.............
    Roll..................... 16192
    EM....................... 16759424
    Heap..................... 0
    Page..................... 24576
    MM Used.................. 6604384
    MM Free.................. 1772536
    SAP Release.............. "640"
    User and Transaction
        Client.............. 200
        User................ "R3REMOTE"
        Language key........ "E"
        Transaction......... " "
        Program............. "SAPLRSSM_PROCESS"
        Screen.............. "SAPMSSY0 1000"
        Screen line......... 6
    Information on where terminated
        The termination occurred in the ABAP program "SAPLRSSM_PROCESS" in
         "CHECK_IF_ANALYZE_IS_NESSESSARY".
        The main program was "RSPROCESS ".
        The termination occurred in line 1143 of the source code of the (Include)
         program "LRSSM_PROCESSF04"
        of the source code of program "LRSSM_PROCESSF04" (when calling the editor
         11430).
        The program "SAPLRSSM_PROCESS" was started as a background job.
        Job name........ "BI_PROCESS_ODSACTIVAT"
        Job initiator... "RPRIYANKA"
        Job number...... 02010102
    Also we have a failed job here. Here is the job log.
    Job log overview for job:    BI_PROCESS_ODSACTIVAT / 02010102
    Date       Time     Message text
    08.01.2008 13:01:00 Job started
    08.01.2008 13:01:00 Step 001 started (program RSPROCESS, variant &0000000000188, user ID R3REMOTE)
    08.01.2008 13:01:02 Activation is running: Data target HBCS_O25, from 1,758 to 1,767
    08.01.2008 13:01:02 Data to be activated successfully checked against archiving objects
    08.01.2008 13:01:02 SQL: 01/08/2008 13:01:02 R3REMOTE
    08.01.2008 13:01:02 ANALYZE TABLE "/BIC/AHBCS_O2540" DELETE
    08.01.2008 13:01:02 STATISTICS
    08.01.2008 13:01:02 SQL-END: 01/08/2008 13:01:02 00:00:00
    08.01.2008 13:01:02 SQL: 01/08/2008 13:01:02 R3REMOTE
    08.01.2008 13:01:02 BEGIN DBMS_STATS.GATHER_TABLE_STATS ( OWNNAME =>
    08.01.2008 13:01:02 'SAPBWP', TABNAME => '"/BIC/AHBCS_O2540"',
    08.01.2008 13:01:02 ESTIMATE_PERCENT => 1 , METHOD_OPT => 'FOR ALL
    08.01.2008 13:01:02 INDEXED COLUMNS SIZE 75', DEGREE => 1 ,
    08.01.2008 13:01:02 GRANULARITY => 'ALL', CASCADE => TRUE ); END;
    08.01.2008 13:01:05 SQL-END: 01/08/2008 13:01:05 00:00:03
    08.01.2008 13:01:05     SQL-ERROR: 603 ORA-00603: ORACLE server session terminated by fat al error
    08.01.2008 13:01:05 System error: RSDU_ANALYZE_TABLE_ORA/ ORACLE
    08.01.2008 13:01:08 ABAP/4 processor: DBIF_REPO_SQL_ERROR
    08.01.2008 13:01:08 Job cancelled
    Listener is working fine, Checked the RFC connections, Tried restarting the system, tried adding space to the TEMP tablespace as well as PSAPBWP, but they didn't work.
    Please help.

    The problem got solved as there were DB errors like ORA-01114: IO error writing block to file 256 (block # 126218).
    Here the point to be notes is file 256. The number greater than 255 indicates a temp datafile. This indicates an issue with PSAPTEMP tablespace. When checked on PSAPTEMP tablespace, one of the filesystems where one temp data file sitting was full. The filesystem was 100% full. This will prevent the temp datafile to grow and shrink as and when required.
    So, adding more space to the filesystem solved the problem.
    Thanks to everyone who have shown interest in solving my problem.

  • ODS - Number of Active Data Records count?

    Hi,
    I am having a ODS. In manage screen of ODS, i can able to see the records as shown bellow:
    Transferred records: 352053
    Added Records: 1836
    But the number of entries in Active Data of ODS is only 471 records.
    My question here is that why Added records (1836) are not equal to number of Active data records (471)? Where i am missing or is it correct?
    Best Regards,
    Venkata.

    Hi,
    Have you completed the Activation of ODS data after uploading? If no see the entries in NEW records' table of ODS.
    If you have activated already,still there is a chance to have different count, because of no of records with same value of KEY fields but exist in different packets.
    With rgds,
    Anil Kumar Sharma .P
    Message was edited by:
            Anil Kumar

  • Data loaded into ODS, but no activation possible

    Hello Experts,
    I've data loaded data into an ODS, but no activation is possible!
    In Monitor it just say something like "not activated yet".
    usually it only takes a minute to activate, so I'm confised.
    any suggestions?
    Thanx
    Axel

    Hi,
    In SM37 -> give Job Name as BI_ODSA* and USer as  *  and check is there any job with Active status. If so, We can say ODS Activation is on process.
    With rgds,
    Anil Kumar Sharma .P

  • DBIF_RSQL_SQL_ERROR while activating data in ODS

    Hi,
    I'm getting the following error when I try to activate the data in ODS. This is happening for all the ODSs in the system.
    SQL-ERROR: 603 ORA-00603: ORACLE server session terminated by fat al error
    System error: RSDU_ANALYZE_TABLE_ORA/ ORACLE
    ABAP/4 processor: DBIF_RSQL_SQL_ERROR
    Job cancelled
    Any suggestion is greatly appreciated.
    Thanks,
    Vish

    hi,
    if not help, check oss note
    840552
    Symptom
    On BW tables that belong to an InfoCube, statistics are calculated (COMPUTE) instead of estimated with the set percentage (ESTIMATE). This results in high runtimes.
    Other terms
    InfoCube, database, Oracle statistics
    Reason and Prerequisites
    In the Oracle-specific RSDU_ANALYZE_TABLE_ORA BW function, in some situations an estimation is made as to how many records are in the table to be analyzed. A SELECT in the USER_TABLES table is specifically used for this. If there is no value there now, 0 is returned and a COMPUTE is carried out. COMPUTE is considerably fasterer than ESTIMATE on small tables (under 10000 approximately).
    However, if the table is too big and if the statistics were deleted by a brconnect run that ran shortly beforehand, the above situation of long runtimes mentioned above can occur.
    Solution
    BW 3.0B
               Import Support Package 27 or 3.0B (BW3.0B Patch 27 or SAPKW30B27) into your BW system. The Support Package will become available oncenote 723258 with the short text, "SAPBWNews BW3.0B Support Package 27", which describes this Support Package in more detail, is released for customers.
    BW 3.10 Content
               Import Support Package 21 for 3.10 (BW3.10 Patch 21 or SAPKW31021 ) into your BW system. The Support Package will become available once <Z1>note 723263 with the short text, "SAPBWNews BW3.1 Content SP 21", which describes this Support Package in more detail, is released for customers.
    BW 3.50
               Import Support Package 13 for 3.5 (BW3.50 Patch 13 or SAPKW35013) into your BW system. The Support Package will become available oncenote 783254 with the short text, "SAPBWNews BW SP12 NetWeaver'04 Stack 13", which describes this Support Package in more detail, is released for customers.
    In urgent cases, you can use the correction instructions.
    To provide information in advance, the notes mentioned may already be made available before the Support Packages are released. However, the short text in this case will still contain the words "Preliminary version".
    769416

  • Index used or not for selecting data from ODS in a start routine

    Dear friends,
    In the start routine of the update rules to a cube, I am reading some data of an ODS in to an internal table .
    The ODS is indexed. But, I am not sure if the index is at all used in the Select statement (that gets the data from ODS to the internal table in the start routine) while loading data to the cube.
    Any help is highly appreciated.
    regards,
    atlaj

    Hi Atlaj
    You can findout this is display execution plan for SQL statement in DB02.
    Goto DB02. and under diagnostic, you find explain. Select that and enter your query. Make sure that everything here is in capital format. Below is a sample query which I have entered.
    SELECT "CRM_SALORG" "SALESORG" FROM "/BI0/QORGUNIT"
    WHERE "SALESORG" = ? AND "OBJVERS" = ? AND "DATETO" >= ?
    AND "DATEFROM" <= ?
    The select parameters should be inside qoutes and in caps and even the from table. Once you enter your query in this format, click on explain. It will show the index scan if the index is present. the output for my query will be something like
    0 SELECT STATEMENT ( Estimated Costs =  1,348E+01 [timerons] )
            1 (COOR) RETURN
                2 (    0) TQ
                    3 (    0) FETCH /BI0/QORGUNIT
                        4 (    0) IXSCAN /BI0/QORGUNIT~Z1
    Where my last statement (line 4) is showing index scan and the name of index read is Z1.
    Hope this helps.
    Please let me know if you have any problems entering the query in the specified format and u get any error.
    Regards
    Sriram

  • Urgent.. generic data source... table not activated.....

    Dear all experts,
    i am extracting generic data source
    while doing it, it is saying as the table which i have selected in the screen SE11 has not activated
    can anybody please tell solution...
    its very urgent.
    points will be assigned to your help.....
    regards
    vinay

    Dear Kalpana M ,
    can you please tell, how to activate tables..
    i m using makt and mara.... and i have created view on them.
    how to activate these tables.
    plz reply, its very urgent.
    regards
    Vinay

Maybe you are looking for