Data in spool file does not match output.

This is a strange issue, and I'm not even sure it's a problem in SAP, but I don't know where else to ask and haven't found anything like it online:
We create pick lists on dot matrix printers. Occasionally, the output is missing a digit or character - for example in the middle of the delivery number. If delivery number is 81234567, the dot matrix output might be 8123467. The SAP spool file is not missing any data. And the paper dot matrix output is never skewed nor looks like it has jammed or "hiccuped". There is no space where the missing piece of data should be - it's all run together nice and neat. It occurs on different bits of data (sometimes, delivery#, name, batch, etc.), and it occurs on different printers at different sites. So far, it has always been only one digit or character missing every time it occurs. Reprint from the spool and it comes out fine.
So, SAP data is correct, and it occurs on different printers. Maybe it's a network issue? A printer buffer issue - but it happens on two different units, and that would be a weird coincidence. I really have no ides. Has anyone ever experienced anything like this?
Thanks,
Anke

Hello -
Difficult to answer accurately here as no access to spool data on the affected system and exact methods used. But, perhaps if you can print the RAW (OTF) data to a fileprinter and send that as a .txt file to the printer hardware vendor they could investigate why certain characters do not print.
Regards.

Similar Messages

AddOnsLocalRegistration.sbo file does not match data in the common datab...

We are receiving the following error everytime we logon our pc for the first time: Add-On Outlook_Integration: This Add-on cannot be upgraded. AddOnsLocalRegistration.sbo file does not match data in the common database for this add-on. See SAP Note 1323680 for more information.
A few months ago, SBO Server was moved from one server to a new virtual server, but we had no problems with the addons. The other day, we upgraded from SBO 2007 to 8.8 and now we are having problems with the Outlook Integration.
I have followed the directions in the message noted above, and did find the AddOnsLocalRegistration.sbo file in some odd places, with a reference to the old server. I cleaned this up, on the server and the client and I can get it running...however, after the user shuts down the pc and logs back in the next day, the problem is back.
In the process of cleaning this up (un-registering the addon and removing the addon references in the local .sbo file) I noticed at times that we would still receive this error, when there really shouldn't be an reference to it.
Thanks for any help.

Hi Vaughn.........
I guess you need a re installation of Outlook Integration Addon.
Whatever version addon of OI you installed just uninstall it and Install it freshly from 8.8 setup package......
Regards,
Rahul

"Source File does not match XML Schema"

Using MDM 5.5 SP4 Patch 2 (Build 5.5.34.26) on a 32-bit system (WinServer 2003, Enterprise Edition SP1.
This source file and schema have been verified by SAP Tech Support and again using Altova XML Spy. The schema was loaded into MDM through the console and the source file was successfully mapped against it and the data manually imported into MDM. The customer record was then cleansed using the Data Manager and the import map was used to create an inbound port. However, when the Import Server goes to import the file using the map, the following error is dropped into the log: "Source File does not match XML Schema". Has anyone else seen this error?
Thanks, Don
IMPORT LOG ENTRY:
<?xml version="1.0" encoding="utf-8"?>
<?xml-stylesheet type="text/xsl" href="MDM_Log.xsl"?>
<MDM_Log version="1.0" path="H:PROGRA~1SAPMDM~1.5IMPORT~1TempMDIS_TASK@@U@[email protected]"
>
     <Open ts-long="18:24:35 GMT, Saturday, February 03, 2007" ts="2007/02/03 18:24:35.108 GMT" pid="8640" host="bp1tulap452" compile-type="RELEASE_32">
          <Trace ts="2007/02/03 18:24:35.249 GMT" tid="7216" entry-no="3">[BP US FUELS CUSTOMER MASTER] Import Task Started. Chunk size[50000], No. parallel chunks[1]</Trace>
          <Trace ts="2007/02/03 18:24:43.890 GMT" tid="5980" entry-no="11">xSaxParser: Starting.</Trace>
          <Trace ts="2007/02/03 18:24:43.937 GMT" tid="5980" entry-no="19">xSaxParser: Ending.</Trace>
          <Trace ts="2007/02/03 18:24:43.937 GMT" tid="5980" entry-no="20">Source file does not conform to XML Schema!<LINE-FEED/></Trace>
          <Trace ts="2007/02/03 18:24:45.312 GMT" tid="7216" entry-no="29">[RESPOSITORY]Import Task Finished. Chunk size[50000], No. parallel chunks[1]</Trace>
     </Open>
</MDM_Log>
SOURCE FILE:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:CustomerCreateResp xmlns:ns1="urn:bp:xi:up:re:cust_mdm:cmdm:pr5:100">
- <CUSTOMER>
- <item>
<CUSTOMERNO>0090154474</CUSTOMERNO>
<MDMCUSTOMER>2463</MDMCUSTOMER>
<CREATE_DATE>22/01/2007,11:43:49</CREATE_DATE>
- <RETURN>
<TYPE />
<MESSAGE />
</RETURN>
- <PT_CONTPART_RETURN>
- <item>
<MDM_CONTACT>0000000001</MDM_CONTACT>
<CONTACT>0001111119</CONTACT>
</item>
- <item>
<MDM_CONTACT>0000000004</MDM_CONTACT>
<CONTACT>0002222229</CONTACT>
</item>
</PT_CONTPART_RETURN>
- <PARTNERS>
- <item>
<CUSTOMERNO>0090154474</CUSTOMERNO>
<PARTNER_FUNCTION>RE</PARTNER_FUNCTION>
<PARTNER_NUMBER>0001333329</PARTNER_NUMBER>
<DEFAULT_PARTNER>X</DEFAULT_PARTNER>
</item>
- <item>
<CUSTOMERNO>0090154474</CUSTOMERNO>
<PARTNER_FUNCTION>WE</PARTNER_FUNCTION>
<PARTNER_NUMBER>0001555559</PARTNER_NUMBER>
<DEFAULT_PARTNER />
</item>
</PARTNERS>
</item>
</CUSTOMER>
</ns1:CustomerCreateResp>
SCHEMA:
   <?xml version="1.0" encoding="UTF-8" ?>
- <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="urn:bp:xi:up:re:cust_mdm:cmdm:pr5:100" targetNamespace="urn:bp:xi:up:re:cust_mdm:cmdm:pr5:100" elementFormDefault="unqualified">
<xsd:element name="CustomerCreateResp" type="CustomerCreateResp" />
- <xsd:complexType name="CustomerCreateResp">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">682cc2d0aa6e11db9b800015c5888624</xsd:appinfo>
</xsd:annotation>
- <xsd:sequence>
- <xsd:element name="CUSTOMER">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">f68988f0a02e11db94bb00166f98336c</xsd:appinfo>
</xsd:annotation>
- <xsd:complexType>
- <xsd:sequence>
- <xsd:element name="item" maxOccurs="unbounded">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b20a75811dba9d400166f983d94</xsd:appinfo>
</xsd:annotation>
- <xsd:complexType>
- <xsd:sequence>
- <xsd:element name="CUSTOMERNO" type="xsd:string" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b21a75811db9c4800166f983d94</xsd:appinfo>
</xsd:annotation>
</xsd:element>
- <xsd:element name="MDMCUSTOMER" type="xsd:string" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b22a75811dbcbac00166f983d94</xsd:appinfo>
</xsd:annotation>
</xsd:element>
- <xsd:element name="CREATE_DATE" type="xsd:string" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b23a75811dbcc0300166f983d94</xsd:appinfo>
</xsd:annotation>
</xsd:element>
- <xsd:element name="RETURN" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b24a75811db8d5500166f983d94</xsd:appinfo>
</xsd:annotation>
- <xsd:complexType>
- <xsd:sequence>
- <xsd:element name="TYPE" type="xsd:string" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b25a75811db876d00166f983d94</xsd:appinfo>
</xsd:annotation>
</xsd:element>
- <xsd:element name="MESSAGE" type="xsd:string" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b26a75811db85c400166f983d94</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
- <xsd:element name="PT_CONTPART_RETURN" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b27a75811db8ca900166f983d94</xsd:appinfo>
</xsd:annotation>
- <xsd:complexType>
- <xsd:sequence>
- <xsd:element name="item" minOccurs="0" maxOccurs="unbounded">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b28a75811dbaae100166f983d94</xsd:appinfo>
</xsd:annotation>
- <xsd:complexType>
- <xsd:sequence>
- <xsd:element name="MDM_CONTACT" type="xsd:string" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b29a75811dbaade00166f983d94</xsd:appinfo>
</xsd:annotation>
</xsd:element>
- <xsd:element name="CONTACT" type="xsd:string" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b2aa75811dbc24c00166f983d94</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
- <xsd:element name="PARTNERS" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b2ba75811dbb74500166f983d94</xsd:appinfo>
</xsd:annotation>
- <xsd:complexType>
- <xsd:sequence>
- <xsd:element name="item" minOccurs="0" maxOccurs="unbounded">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b2ca75811db9f6500166f983d94</xsd:appinfo>
</xsd:annotation>
- <xsd:complexType>
- <xsd:sequence>
- <xsd:element name="CUSTOMERNO" type="xsd:string" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b2da75811db9bd800166f983d94</xsd:appinfo>
</xsd:annotation>
</xsd:element>
- <xsd:element name="PARTNER_FUNCTION" type="xsd:string" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b2ea75811dbb84100166f983d94</xsd:appinfo>
</xsd:annotation>
</xsd:element>
- <xsd:element name="PARTNER_NUMBER" type="xsd:string" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b2fa75811db852800166f983d94</xsd:appinfo>
</xsd:annotation>
</xsd:element>
- <xsd:element name="DEFAULT_PARTNER" type="xsd:string" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b30a75811db968400166f983d94</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>

You have to define the namespace in the URI field of XML Schmea in Console.
In MDM Console,
Admin -> XML Schemas -> Create XML Schema
You have to specify the namespace urn:bp:xi:up:re:cust_mdm:cmdm:pr5:100 in the URI property.
Please update this post if fixed your problem.

Planning Quick Win Error: Registration file does not match the app version.

Gents,
I have a Fusion 11.1.2 install on a Windows 2003 server environment.
After creating the Planning App in Classic mode, I logged back in to Initialize the App... and I got this.
This occurred when I tried to log on to the Planning App in Workspace. (I was about to go Create/Refresh the app) :
"An error occurred while processing this page. Check the log for details.Please close the current tab and open application again. Single Sign on Validation failed"
The SharedServices_Security.log goes as follows:
2009-05-12 16:08:11,437 ERROR [http-28080-Processor3] com.hyperion.css.common.CSSUtils.checkValidArgument(Unknown Source) -- 26:1002:Invalid value for identity. Enter a valid value.
2009-05-12 16:08:11,468 WARN [http-28080-Processor3] com.hyperion.css.spi.impl.nv.NativeProvider.getHierarchicalRoleTree(Unknown Source) -- Exception getting Child Roles in hierarchy [Root Cause: 26:1002:Invalid value for identity. Enter a valid value. ]
2008-05-12 16:42:47,781 WARN [http-28080-Processor9] com.hyperion.css.spi.impl.nv.XMLRoleRegDocumentModel.recurseDocumentTree(Unknown Source) -- The Product 'Hyperion Planning' Version 'HP-9.5.0' in the Registration file does not match the application version '9.5.0'
Any suggestions?
Thanks.
Eric.

Hi,
If you are running on a Microsoft OS, have a look the log :- :\Hyperion\logs\services\HyS9Planning-sysout.log
Not sure how much information it will give though.
Cheers
John
http://john-goodwin.blogspot.com/

Public-yum ol6_latest Metadata file does not match checksum

Update: public-yum is working today and manual checksum is matching as well.
I am trying to apply the latest Oracle Linux 6 patches to a fresh 6.4 install from the public-yum. I am able to successfully apply the latest Oracle Linux 6 UEK from the ol6_UEK_latest repository on public-yum. I am unable to access the ol6_latest repository on public-yum because I receive a "Metadata file does not match checksum" error. I have attempted to manually verify the checksum and receive a mismatch as well. See below for more details.
Thanks,
Erick
$ ### clean up yum cache directory
$ yum clean all
Loaded plugins: refresh-packagekit, security
Cleaning repos: ol6_UEK_latest ol6_latest
Cleaning up Everything
$ ### attempt to check for updates
$ yum check-update
Loaded plugins: refresh-packagekit, security
ol6_UEK_latest                                                                           | 1.2 kB     00:00
ol6_UEK_latest/primary                                                                   | 8.0 MB     00:00
ol6_UEK_latest                                                                                          183/183
ol6_latest                                                                               | 1.4 kB     00:00
ol6_latest/primary                                                                       | 29 MB     00:02
http://public-yum.oracle.com/repo/OracleLinux/OL6/latest/x86_64/repodata/primary.xml.gz: [Errno -1] Metadata file does not match checksum
Trying other mirror.
ol6_latest/primary                                                                       | 29 MB     00:02
http://public-yum.oracle.com/repo/OracleLinux/OL6/latest/x86_64/repodata/primary.xml.gz: [Errno -1] Metadata file does not match checksum
Trying other mirror.
Error: failure: repodata/primary.xml.gz from ol6_latest: [Errno 256] No more mirrors to try.
$ ### manually verify checksum by downloading gz for UEK repository
$ wget http://public-yum.oracle.com/repo/OracleLinux/OL6/UEK/latest/x86_64/repodata/primary.xml.gz
--2013-06-13 09:49:17-- http://public-yum.oracle.com/repo/OracleLinux/OL6/UEK/latest/x86_64/repodata/primary.xml.gz
Connecting to 10.87.79.250:8080... connected.
Proxy request sent, awaiting response... 200 OK
Length: 8409269 (8.0M) [application/x-gzip]
Saving to: “primary.xml.gz”
100%[======================================================================>] 8,409,269   11.1M/s   in 0.7s
2013-06-13 09:49:18 (11.1 MB/s) - “primary.xml.gz” saved [8409269/8409269]
$ ### now download xml for UEK repository
$ wget http://public-yum.oracle.com/repo/OracleLinux/OL6/UEK/latest/x86_64/repodata/repomd.xml
--2013-06-13 09:52:14-- http://public-yum.oracle.com/repo/OracleLinux/OL6/UEK/latest/x86_64/repodata/repomd.xml
Connecting to 10.87.79.250:8080... connected.
Proxy request sent, awaiting response... 200 OK
Length: 1240 (1.2K) [text/xml]
Saving to: “repomd.xml”
100%[======================================================================>] 1,240       --.-K/s   in 0s
2013-06-13 09:52:14 (106 MB/s) - “repomd.xml” saved [1240/1240]
$ ### get published checksum from xml
$ grep -nA1 primary.xml repomd.xml
16:    <location href="repodata/primary.xml.gz"/>
17-    <checksum type="sha">c8fc85aa170c9da4a04e8a58ab594f67c319e874</checksum>
$ ### generate checksum for gz
$ sha1sum primary.xml.gz
c8fc85aa170c9da4a04e8a58ab594f67c319e874 primary.xml.gz
$ ### UEK checksums match, clean up UEK files from directory
$ rm primary.xml.gz repomd.xml
$ ### manually verify checksum by downloading gz for ol6 repository
$ wget http://public-yum.oracle.com/repo/OracleLinux/OL6/latest/x86_64/repodata/primary.xml.gz
--2013-06-13 10:04:59-- http://public-yum.oracle.com/repo/OracleLinux/OL6/latest/x86_64/repodata/primary.xml.gz
Connecting to 10.87.79.250:8080... connected.
Proxy request sent, awaiting response... 200 OK
Length: 30474994 (29M) [application/x-gzip]
Saving to: “primary.xml.gz”
100%[======================================================================>] 30,474,994 6.64M/s   in 4.5s
2013-06-13 10:05:04 (6.40 MB/s) - “primary.xml.gz” saved [30474994/30474994]
$ ### now download xml for ol6 repository
$ wget http://public-yum.oracle.com/repo/OracleLinux/OL6/latest/x86_64/repodata/repomd.xml
--2013-06-13 10:05:10-- http://public-yum.oracle.com/repo/OracleLinux/OL6/latest/x86_64/repodata/repomd.xml
Connecting to 10.87.79.250:8080... connected.
Proxy request sent, awaiting response... 200 OK
Length: 1429 (1.4K) [text/xml]
Saving to: “repomd.xml”
100%[======================================================================>] 1,429       --.-K/s   in 0s
2013-06-13 10:05:10 (55.7 MB/s) - “repomd.xml” saved [1429/1429]
$ ### get published checksum from xml
$ grep -nA1 primary.xml repomd.xml
16:    <location href="repodata/primary.xml.gz"/>
17-    <checksum type="sha">c8b3d8c353045b6e96f1eb6ed519c5d6e75faad3</checksum>
$ ### generate checksum for gz
$ sha1sum primary.xml.gz
47c33491455170c1460646ab3652e40087a4aa19 primary.xml.gz
$ ### ol6 checksums do not match, clean up ol6 files from directory
$ rm primary.xml.gz repomd.xml
$
Message was edited by: esigfrid

Thank you for your advice. Currently public-yum is working again for my two systems (without any changes on my side). If I run into this problem again I will give it a try.
Erick

JNI generated header file does not match the class file

We have had a JNI project for many years and all has been fine. Within our libraries we have several classes that have inner enum classes.
Recently we have moved to JDK1.7. Up to now when JNI generated the methods where the signature used the inner enum class, and it was an oveloaded method, we would get something like the following as the signature:
Java_PackageName_ClassName_methodName_OuterClass_00024InnerEnum_2
And the class file result of the build would look like the following:
methodName(OuterClass$InnerEnum)
Since we have moved to JDK 1.7 the header file looks like the following:
Java_PackageName_ClassName_methodName_OuterClasss_InnerEnum_2
The class file is still the same, and because of that when we run the program we get an UnsatisfiedLinkError. I understand that this error is because the VM cannot find the implementation. So why JDK 1.7 generates a header file that does not match the class file?
Thank you in advance.

I don't have 1.6 to verify but your statements about what is generated for 1.7 for the header appear correct.
The 000024 represents the '$' and for 1.7 the inner class is still named using '$'. So for example after compiling in 1.7 the inner class file is named the following...
MyClass$InnerEnum.class
So a one to one conversion should have kept the 000024 (presuming it does in fact do it that way in 1.6.)
You might want to look at the release notes for 1.7.
If you need a solution you could add a post javah step that renames the file.

Cropping preview does not match output, constrained sizes.

I have two separate problems with the Crop tool. The first is that the crop preview does not match the what shows up after I exit crop mode.
Screen shot of to the preview: tinyurl.com/o9qxcy
After hitting "done": tinyurl.com/prtsrw
What is really strange is that I can work around this by expanding the crop size to almost the full size (less ~1 pixel off the bottom) and iMovie crops to the width of the original clip. If I expand it to full size of the preview area the crop still slices to the width, but it is then centered.
The second problem is that cropping will not let me expand the crop beyond a certain size. I have no work-around for this.
Screenshot of the max size I can select with the crop tool: tinyurl.com/pjqjno
Both of these happen both the project area and the clips drawer.

Bump.

"file does not exist" output Help !

Dear Java People,
I am doing a program that uses the methods of the File class.
When I test to see if my file (containing the driver class )exists
it says "does not exist" . I don't know why it doesn't see my file
below is the coding the doesn't see my file and below that the program
Thank you in advance
Norman
//create an object that is a file
        File myFile = new File(myDir, "TryFile.java");
         System.out.println(myFile + (myFile.exists() ? " does" : " does not") +
                             " exist.");
import java.io.File;
import java.util.Date;
public class TryFile
    public static void main(String[] args)
        //create ab object that is a directory
        File myDir =
        new File("C:\\Documents and Settings\\Gateway User\\jbproject\\stan_ch9_363");
        System.out.println("\n" + myDir + (myDir.isDirectory() ? " is" : " is not")
        + " a directory.");
         System.out.println( myDir.getAbsolutePath() +
         (myDir.isDirectory() ? " is" : " is not") + " a directory.");
          System.out.println("The parent of " + myDir.getName() + " is " +
          myDir.getParent());
        //create an object that is a file
        File myFile = new File(myDir, "TryFile.java");
         System.out.println(myFile + (myFile.exists() ? " does" : " does not") +
                             " exist.");
         System.out.println(myFile + (myFile.isFile() ? " is" : " is not")
                                   + " a file.");
         System.out.println(myFile + (myFile.isHidden() ? " is" : " is not")
                                   + " hidden.");
         System.out.println("You can" + (myFile.canRead() ? " " : " not")
                                   + " read. " + myFile);
        System.out.println("You can" + (myFile.canWrite() ? " " : " not")
                                   + " write. " + myFile);
          System.out.println();
         //get the contents of the directory
         File[] contents = myDir.listFiles();
         //list the contents of the directory
         if(contents != null)
             System.out.println("\nThe " + contents.length + " item(s) in the directory "
                               + myDir.getName() + " are:\n " );
             for(int i = 0; i < contents.length; i++)
               System.out.println( contents[i] + " is a " +
               (contents.isDirectory() ? "directory" : "file") +
" last modified on " + new Date(contents[i].lastModified()) + "\nthe number of bytes in TryFile.java are " + myFile.length());
else {
System.out.println(myDir.getName() + " is not a directory");
System.exit(0);

Dear SMcKee,
I realize now that JBuilder is Not the IDE of choice when doing programs that utilize the File class methods.
The program worked without a hitch in the BlueJ IDE
below is all the correct output. Thank you again !
Norman
C:\Documents and Settings\Gateway User\jbproject\stan_ch9___p363 is a directory.
C:\Documents and Settings\Gateway User\jbproject\stan_ch9___p363 is a directory.
The parent of stan_ch9___p363 is C:\Documents and Settings\Gateway User\jbproject
C:\Documents and Settings\Gateway User\jbproject\stan_ch9___p363\TryFile.java does exist.
C:\Documents and Settings\Gateway User\jbproject\stan_ch9___p363\TryFile.java is a file.
C:\Documents and Settings\Gateway User\jbproject\stan_ch9___p363\TryFile.java is not hidden.
You can read. C:\Documents and Settings\Gateway User\jbproject\stan_ch9___p363\TryFile.java
You can write. C:\Documents and Settings\Gateway User\jbproject\stan_ch9___p363\TryFile.java

Spool file does not contain any text when PDF is printed

When we print some PDF files via Adobe Reader, the printjob does not contain any text.
In Adobe Reader I can select the text but when you print it, it prints it as images (polygons records in EMF) instead of text (e.g. EMR_TEXTOUT).
Two questions:
How can we make sure that Adobe Reader always prints text?
On what is the decision based in Adobe Reader to print the PDF document as an image or as text?

Well we are looking for this information, otherwise we would not have asked this question. I really hope to get in contact with a Adobe Reader printing specialist who could give us these answers.
There must be something that decides to print as image or with text.
E.g. Adobe Reader 9 often prints text compared where Adobe Reader XI doesn't print the text for the same PDF.

Data type column size does not match size of values returned

I've tried searching but couldn't find what I was looking for, sorry if this has been answered or is a duplicate.
I am using the (Java) method below to get the column definitions of a table. I am doing this through an ODBC connection (using Oracle ODBC driver) and I have NO CHOICE in the matter.
The problem I am having is that one particular column has a column size is smaller than the size of the data it purportedly holds (ie attendance_code = varchar size 3 but data value is "Absent". I suspect the data is actually a look up to situation, where my attendance_code column has a value of 'ABS' and Oracle goes and fetchs the "Absent" value.
My issue is that the meta data returned from ODBC is the actual column definition (ie varchar(3) and not varchar2(10) for example).
The resultset metadata has a size of 3 for the column in question, and querying the schema also yields 3 for that column.
How do I resolve this? I do not have access to all_columns table etc. I have to do it using ODBC metadata only.
I've tried recreating the situation using the Oracle XE DB, but as I am not familiar with Oracle, I do not know how to recreate this scenario (which would then lead me to test other options with ODBC).
TIA.
The select I am using is SELECT * FROM <tableName>.
public ArrayList<SchemaColumn> getColumnsForTable(String catalog,
String schema,
String tableName) {
ArrayList<SchemaColumn> columns = new ArrayList<SchemaColumn>();
ResultSet rs = null;
try {
DatabaseMetaData metaData = connection.getMetaData();
rs = metaData.getColumns(catalog, schema, tableName, "%");
SchemaColumn column;
while (rs.next()) {
column = new SchemaColumn();
column.setName(rs.getString("COLUMN_NAME"));
column.setDataType(rs.getInt("DATA_TYPE"));
column.setTypeName(rs.getString("TYPE_NAME"));
column.setColumnSize(rs.getInt("COLUMN_SIZE")); <-------- this is the value that is coming back smaller than the data it actually returns
column.setDecimalDigits(rs.getInt("DECIMAL_DIGITS"));
column.setNumPrecisionRadix(rs.getInt("NUM_PREC_RADIX"));
column.setNullable(rs.getInt("NULLABLE"));
column.setRemarks(rs.getString("REMARKS"));
column.setDefaultValue(rs.getString("COLUMN_DEF"));
column.setSqlDataType(rs.getInt("SQL_DATA_TYPE"));
column.setSqlDateTimeSub(rs.getInt("SQL_DATETIME_SUB"));
column.setCharOctetLength(rs.getInt("CHAR_OCTET_LENGTH"));
column.setOrdinalPosition(rs.getInt("ORDINAL_POSITION"));
columns.add(column);
} catch (Exception e) {
Log.getLogger().error("Could not capture table schema");
closeResultSet(rs);
return columns;
}

I can't say I've ever seen a case where a column held more data than it was declared as, and would have to file that under "see it to believe it" category.
Even if that somehow were the case, I'd expect the ODBC driver to return what the column is defined as anyway, not the data. The data changes with every row, but I'd expect the table metadata to be consistent, and refer to the table definition.
For grins though, can you provide system.out.println output of the metadata, and also a "describe xxxx" from sqlplus if you can, where xxx is the table name?
ie,
while (rs.next()) {
System.out.println("column name is " + rs.getString("COLUMN_NAME"));
System.out.println("data type is " + rs.getInt("DATA_TYPE"));
..etc..
Greg

Exported video file does not match audio file in length?

I'm back with the same problem.
Here are the specs for this project:
Premiere Pro 5
Footage shot in HDV 1080i (Sony FX1)
Edited Timeline length...52:25
Destination: Blu-ray disc
I have tried both formats in the AME...MPEG2 Blu-ray and H.264 Blu-ray
I have tried every combination of Presets within these two formats...Match Attributes, 1440x1080i, HDTV....etc, etc, etc
The machine is spending anywhere from 7 hours to 27 hours to encode these files.
When I open the two files after the operation has finished, I find I have an audio file 52:25 in length and a video file 43:34, no matter what format or preset I have chosen!
Upon playback, you can imagine the frustration...within the first two minutes the two are out of sync.
What am I doing wrong here.
This is my first sortie into the HD world of Adobe. I've been doing Adobe Premiere SD for 10 years...and my deadline for the closed captioning is coming way too soon.
I appreciate any help you might offer.

Jim...Yes! I just did that this morning in frustration and by golly, they are both the same length. There is a note in the Project window after I copy to "Timeline" that says the video file is unencoded! Wierd! Another problem popped up in that the video and audio files are in different sequences in Encore. I cannot get them to play together. One will play and not the other...? I can't seem to drag them to the same sequence.
But, at least they are the same length! Mysteries in this HD business.

E301 Symbol type in value file does not match symbol type in layout

Hello Experts,
Please help me. I am getting this kind of error when I am trying to open a report in cg02 using Report From Template option.
Regards
Dheeraj

Dear Dheeraj
Regarding:I am facing this problem only with one specification. For the other specifications I am able to open the report properly from Report from Template option.
Please compare data from one spec to the other. One spec does have more data. This "more" data yield to the result that a different WWI code is used and this WWI code is not "ok" and therefore you get problems.
Regarding; "Maitain Parameter Values" => try to skip or write "hello world" or whatebver; parameter values are needed later; only on "rare" cases they have impact on the e.g. report from template creation so taht you get a problem
Regarding:
I tried creating the report but the report is not created.The status of the report is Error. i went to information tab and clicked on F6 Parameter Values. System has thrown a message saying "No Parameter Symbols found in the template". But system is trying to pass the parameter values. I think because of this I am getting error..
Either you have used the wrong symbol type or used wrong function module to assign it to a own developped report symbol. etc. Please check; what was the last change either in WWI code or in report symbol definition.
Some thread have shown that sometimes the report symbol is prepared as report type "01" but should be "02" (or the other way around). This is one reason for such issues
Only by doing it step by step and checking:
a.) what has been changed in template?
b.) what is the difference in data on sepc 1 in comparison to spec 2
You will succeed. Sorry to say: to debug WWI is not as simple as ABAP code. This is one reason why some developpers might get "frustrated" in WWI;
May be check: WWI for Beginners
as well
C.B.

(Minor?) Bug: ACR Preferences file does not match ACR version number

This may be of no major consequence (I don't know one way or the other) but the preferences file for ACR 4.2 on my Mac shows up as "Adobe Camera Raw 4.1 Prefs", even after trashing it and letting ACR rebuild it.

The question mark should have been after "Bug", I reckon. (As in "Bug?")
The reason I brought it up was that it has caused confusion to at least one user over at the Bridge Macintosh forum.
The Adobe Bridge team has been suggesting to purge the ACR cache as a means to alleviate a very significant bug in Bridge (it's showing the wrong thumbnail and preview in some instances, speciously calling up thumbnails and previews of totally unrelated images in very different folders).
Therefore, that user (and I suspect others) tried nuking the ACR preferences file as well.

Audio sample rate does not match (HDcam to dvcam)

I'm trying to import clips and keep getting this message:
"The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape. This may cause the video and audio of these media files to be out of sync. Make sure the audio sample rate of your capture preset matches the sample rate of your tape."
Footage was originally shot on HDCAM and transferred to DVCAM elsewhere. Using FCP 5, am importing via firewire from a Sony DSR-11 deck. Using DV NTSC 48kHz Anamorphic as capture settings (though I've tried everything that I thought might possibly work with no success). The audio does not seem to drift over the course of several 5 minute or so clips. Clip settings show audio at 48 kHz (don't know if that's from capture settings or from actual data). Seems to me all audio should be 48 kHz 16 bits, so can't figure out what's going on. I have to export an EDL for the project to be finished in HD. Read some similar threads that ended in December, seemingly without much resolution. My broader concern is why this is happening; my immediate concern is do I need to worry about this right now since the media files will need to be recaptured in HD anyway. Any thoughts?
Thanks

A little more info. I'm having this problem on 4 tapes (from different cameras) that were transferred to DVCAM in a squished format to appear full screen on a 4x3 monitor. Video that was letterboxed and I can bring in with the standard DV NTSC capture settings does not have this problem. Still have the problem if I try to import the clips from the squished video with standard settings. Any thoughts?

How to avoid output file and error lines when condition does not match

Hi Experts
A customer want to send purchase order files to several vendors and each vendor has their own requirement to content and file format. I have prepared scenarios for each vendor and a template is (conditionally) called when CardCode matches. It works fine, - PO file is generated when CardCode matches, but error lines are written to SAP B1 Control Center each time CardCode does not match the one defined in a scenario (100 or more times per day). Problem is that these error lines does not get automatic deleted. Conditional processing are made in this way:
Result Message in SAP B1 Control Center when CardCode does not match:
I tried to avoid an error line in SAP B1 Control Center when CardCode does not match in this way:
Then no error lines are written to SAP B1 Control Center, but an output file is generated each time (order file when CardCode matches and an empty file when CardCode does not match).
Any suggestions on how to avoid both errors types (error lines in SAP B1 Control Center and empty output files)?
Or - can lines in SAP B1 Control Center be automatic deleted?
Regards
Steen

Hi Steen,
using <b1im_skip> should be the right approach, if you're working with B1 OUTBOUND.
Following extract form the B1i help describes the usage to skip the outbound processing:
1.1 Skipping Outbound Processing
If you do not want to hand over the message to the receiver system, the scenario step can create a special tag that indicates to generic processing in the integration framework to skip the message processing.
Add the following to the final transformation atom (atom0):
<b1im_skip xmlns= ”” info=”my info” msglog=”true” msgout="yes">
If the integration framework skips the message, it puts the message log information to the Filtered section, if the message log is switched on. The result message contains the Message skipped by vBIU logic information.
info
To display an individual message, define it using the info attribute.
msglog
If you want to avoid an entry in the message log, introduce the msglog attribute and set it to false.
msgout
To display the skip information in the Success section of the message log, use the msgout attribute and set it to yes.
In case you don't want any MsgLogEntry in case of a skipped message, please enter the following in final atom0:
<xsl:template name="transform">
<xsl:attribute name="pltype">xml</xsl:attribute>
<xsl:choose>
<xsl:when test="$msg/BOM/BO/Documents/row/CardCode='C20000'">
<xsl:call-template name="transform2"/>
</xsl:when>
<xsl:otherwise>
<b1im_skip info="skipped" msglog="false"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
Best regards
Bastian

Data in spool file does not match output.

Similar Messages

Maybe you are looking for