Data Inconsistency when activating DSO in BI 7.0

Hi Guys,
We are using BI 7.0, We have an ODS object and 2 IOs in that A & B. When we load data to that DSO it is loaded propery and that 2 IOs data is seen in New Data Table.
The real strange thing when we activate that request that 2 IOs data is not seen ( 2 IOs show empty columns).
Its urgent,  happening in Support..
Please help me out...
thanks in advance
Peter

We are using BI 7.0, We have an ODS object and 2 IOs in that A & B. When we load data to that DSO it is loaded propery and that 2 IOs data is seen in New Data Table.
  So you have loaded data to the DSO.
The real strange thing when we activate that request that 2 IOs data is not seen ( 2 IOs show empty columns).
After activating the request where you are not able to see the data? at new table ? at active table?
can you check you active table of the DSO.

Similar Messages

  • Error occurred while deciding partition number,when activating DSO data.

    HI all,
    I have 2 requests in my DSO,when i activated the data for the 1 request manually it worked fine.But when activating the 2 nd request.It failed giving me the following error.
    Error occurred while deciding partition number,
    PSA update failed
    Process 000002 returned with errors
    Process BCTL_D4A4RYBAVI2HZ9FAMIP9TNMAI could not be terminated. Terminate manually
    Data pkgs 000001; Added records 1-; Changed records 0; Deleted records 0
    Log for activation request ODSR_D4A4RYBAVI1QAN3JAZ9NR880Q data package 000001...000001
    Errors occured when carrying out activation
    Analyze errors and activate again, if necessary
    Activation of M records from DataStore object 0FIGL_O02 terminated
    Report RSODSACT1 ended with errors
    Job cancelled after system exception ERROR_MESSAGE
    Please advice on how to resolve this issue.thanks in advance

    Hi Shambhu,
    thanks for your reply.
    I tried activating again.but it failed.Problem is it has about 10 mil records and this load is very important to be done within next 12 hours.
    I had deleted a PSA request but when i looked into the table RSTSODSPART,i have a PSA request not checked for Deletion flag.I am not sure why this happened.Does this have anything to do?But i also have another question,if i load from PSA was successful,i dont see a point as why the second load would error out.In that case is there anyway to delete one particular entry in that table.
    Please advice

  • Data lost after activating DSO

    Hello,
    I have a Problem with Standard DSO. We load data in the standard DSO and in the transformation is an end routine to fill an specific field Bpartner with the Bpartner number from antoher DSO. After the load In the DSO table new data is everything okay (Bpartner filled from the other DSO) but when I'm activating that DSO in the table active data Bpartner is empty. Has anyone a solution/explanation for this problem?
    Thanks for your answers.
    Best regards,
    Sebastian

    In the Transformation, set the BPARTNER to a constant value and leave that value. This will then cause the activation to move the BPARTNER that's entered in the End Routne to populate on the Active table during activation.

  • Error when activating DSO data

    On activation, I see the following error in ST22:
    Invalid column name 'TCTIVAL60'
    Any idea? Thanks in advance!

    Well, I don't think the problem has anything to do with the content. It just looks as if the corresponding database object is inconsistent.
    I already found an article for this problem:
    BW SID Table /BI0/STCTIVAL60 is inconsistent after upgrade of update | Program error Notes | SAP Techies
    I will try this first and come back with the results...

  • Error when activating DSO

    Hi All,
         We are into critaical situation where we have huge data, some how loaded into BW DSO, there are 3Crore records.
    when we activate DSO it's throwing an error, time out, we changed RSODSO_Settings but still it doesn't work.
    As there is huge  data we loaded it based on quarter, when we are trying to activate  data, it is showing error that  initial request is not updated, in fact we devided this initial request into multiple by selecting full upload in DTP.
    Can somebody help us in resolving this error.
    Regards,
    Kishore

    Hi Kishore,
    If your DSO Activation is a part of any Process Chain, try activating the request manually.
    Call RSA1 > Context menu of your DSO > Manage > Request Tab > Select your request > Activate > Uncheck 'Do not Condense Requests' > Save> OK.
    Hope this helps.
    Regards
    Sai

  • Error when generating master data routines when activating infoobject

    Hello Gurus,
    I had an issue with one of my info object.
    I Created the one Custom InfoObject  with Just 5 Char without any masterdata and used that in many cubes. we promoted the objects and cube to test and production systems. just couple of days back we can see the InfoObject  went to inactive status even though the version is active(not sure how it happend). This is only happens in our test system and production is working fine. when i try to activate the InfoObject  again the test system it gives me an error
    Characteristic XXXXX: Error when generating master data routines. Tried to correct in RSD5 etc. Checked in RSRV everything is fine. Tried to re-promote the object from Development system. The transport also failed with the same error even though it is in unconditional mode.
    Can you please suggest me what are the options.
    i cannot delete the object as it is used in many cubes which is having data.
    Appreciate your quick response.
    Thanks,
    Bhaskara Rao.

    If your Prod is working fine, it should work in test too.
    Did it ever worked in test after transport?
    Is it possible some one tried to change something in test? If yes, you will get error when you will try to re-transport it as new transport can't find the previous structure.
    You may try to activate the IO using FM RSDG_IOBJ_ACTIVATE
    Edited by: ashok saha on Mar 6, 2008 8:05 PM

  • Missing data in few fields when activated data in DSO

    Hi,
    I have loaded data into a DSO. Before activating the DSO i can see the values for Sales Organization, Distribution channel and Division fields. But after activation these values disappear.
    These values are maintained through CONSTANT in transformations.
    Any solution please....
    I hve tried it through routines also but no use... same prob.

    Hi Prathish,
    The data is visible in New Data Table, but when activated the values disappear.
    I have reactivated the transformation and reloaded but no use..........
    Any other idea.........

  • Issue related with the Date Format --- error when activating the DSO

    Hi Friends..
    plz help me to fix the issue ...im getting when activating the DSO...
    Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..
    is there any routine to solve this or i have to go for data selection in info package ......
    I have searched in the forum also..but im not able to fix..plz help
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT*
      Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT*
      Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE*
      Value '20101502' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT*
      Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT*
      Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT*
      Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZDUEDAT*
      Value '20101402' of characteristic 0DATE is not plausible
    Thanks
    Baskar
    Edited by: tjgnanabaskar on Aug 6, 2010 5:35 PM

    Hi Friends..
    plz help me to fix the issue ...im getting when activating the DSO...Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..is there any routine to solve this or i have to go for data selection in info package ......I have searched in the forum also..but im not able to fix..plz help
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT
    Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT
    Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE
    Value '20101502' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT
    Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT
    Value '31122009' of characteristic 0DATE is not plausible
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT
    Value '31122009' of characteristic 0DATE is not plausible
    Thanks
    Baskar

  • SQL error while activating DSO and loading Mater Data

    Hello Experts,
    we are having process chains which include process activating DSO and loading to Master data,
    while executing achai, we are getting error:
    An error occurred during confirmation of process 000008. See long text
    Message no. RSODSO_PROCESSING024
    Diagnosis
    Note the detailed system message:
    An SQL error occurred when executing Native SQL.
    when i go to T-Code: ST22
    the diagnosis is below:
    Runtime Errors         DBIF_RSQL_SQL_ERROR
    Exception              CX_SY_OPEN_SQL_DB
    Date and Time          20.05.2010 22:18:02
    What happened?
         The database system detected a deadlock and avoided it by rolling back
         your transaction.
    What can you do?
         If possible (and necessary), repeat the last database transaction in the
          hope that locking the object will not result in another deadlock.
         Note which actions and input led to the error.
         For further help in handling the problem, contact your SAP administrator
         You can use the ABAP dump analysis transaction ST22 to view and manage
         termination messages, in particular for long term reference.
         Note which actions and input led to the error.
         For further help in handling the problem, contact your SAP administrator
         You can use the ABAP dump analysis transaction ST22 to view and manage
         termination messages, in particular for long term reference.
    Could you please help me out how can i deal with this issue, .
    Regards
    Sinu Reddy

    it seems that the target you're loading to is already locked by another load...if it concerns a master data is also possible that the master data is locked by a change run. check your scheduling and make sure you don't load the same target at the same moment...
    M.

  • Error while activating DSO ....date is not possible....

    Hi all,
    While activating the DSO ,I am getting the following error: Value '20022009' of characteristic 0DATE is not possible
    In FEB 20/02/2009 is possible ...but why system giveing this message...?
    Any suggessions...on this..
    Thanks....Bk
    Edited by: BK BI on Feb 24, 2009 9:39 AM

    Hi BK,
    Looks like in your case 20 is being considered as month which is obviously invalid hence no SID could be generated for 0calday and hence the DSO fails when activation.
    Now as Daya and anil mention you could change the date to format yyyymmdd and try reloading the file.
    The general principle would be go to menu settings ---> status and check the logged on date ...the format being shown to you is the format you can try loading in.
    Or go to System --- > User profile -
    > Own data --->defaults tab .... check the data format there and enter the value in that format in your file..
    Hope it helps,
    Regards,
    Sunmit.

  • Error while Activating DSO Data

    Hello
    I am having a problem, I am getting an Error while activating DSO Data, Data is loaded in DSO succefully but can not be activated with this error
    "Activation of M records from DataStore object 0FIAR_O03 terminated"
    Thanks

    Hi,
    The activation would have failed due to varies reasons..
    It would be a short dump,check in ST22.
    check the job log in SM37 for better understanding of the issue.
    Have you loaded the respective master data?
    if it is a transaction data load,then the SID is checked at the time of activation and not during loading.
    So if the master data is not loaded then the activation would fail.
    It can also be due to the system performance at that moment.
    Even if the data volume is huge ,there are chances of the activation failing..
    Try repeating the activation once again.it might succeed..
    Else check the logs to understand the actual issue.

  • Error when Activating the data store object

    Hi All,
    I have to get the following below errors when i was activating the ods.
    Transfer structure prefix for source systemt T90CLNT is not defined
    Error when creating the export datasource and dependent objects
    could anyone help me on this issue.
    Regards,
    Naveen.
    Edited by: naveen naveen on Feb 2, 2009 6:35 AM

    Hi Naveen,
    Check the Source System connection and Run program RS_TRANSTRU_ACTIAVATE_ALL in SE38 and give your Source system ID and Infosource. If you have infosource. or replicate your datasource.
    and also Check the BW self System whether it is active or not. then try activating DSO
    hope this helps
    Regards,
    Daya Sagar
    Edited by: Daya Sagar on Feb 2, 2009 11:13 AM

  • DBIF_DSQL2_DEFAULT_CR_ERROR while activating DSO data

    Hello Friends,
    While activating DSO data i am getting 'DBIF_DSQL2_DEFAULT_CR_ERROR' . please suggest me a solution .
    Regards
    Nilesh

    Hi Nilesh,
    Try to check the following link:
    /message/5657425#5657425 [original link is broken]
    And moreover this error occurs during COMMIT or ROLLBACK to "DEFAULT" database connection.
    Regards,
    Srinivas.

  • Error when activating Real Time Data Source

    Hi..
    I created a generic datasource in R/3 system via RSO2, with the Real-time check box enabled in the settings for Generic Delta. I saved the datasource. Replicated it into BW System.
    I tried to activate this Real time Data Source in BW, it says "Error when activating Data Source".
    I am on BI 7.0, with PI_BASIS: 2005_1_700.
    Please let me know if you need any further information.
    Thanks,
    Sai.

    Hi sai,
    Can you specify from where you have created your geneic data source like by using DB tabl/view/infoset query.
    am

  • Error when activating the master data

    Hi
    I am getting the following error when activating the master data. when using IDOC as transfer method in transfer rules
    <b>Error while creating table 'EDISEGMENT' entry '/BIC/CIRB0CLASS_NUM_TEXT'</b>
    If anyone came across this kind of problem plz share the solution.
    Regards
    Annie

    Hi
    I solved the problem. AFter changing from PSA to IDOC, i just saved first and activated. it got activated. But thanks for the response.
    There are no short dumps in ST22
    Regards
    Annie

Maybe you are looking for