Data incorrect in PSA when Loading.

guys i have a generic data source in my DEV R/3 environment, i had to change some code in its function module for loading, the data source bring the right data for employees and is active in rsa6. i have replicated the data source in BWD.. now here is the issue, i have have 1 selection criteria in infopackage "employee number". when i leave it blank, i get incorrect rates while loading trough PSA or directly in the ODS.But when i specify employee number , the data comes out correctly in the PSA and ODS. any thoughts?
Amer

i cannot paste the code here.. RSA3, the data source brings the correct data...but in BW PSA it doesnt, i have a feeling its still trying to pull up old data even after replication, How can i check if there is logical set up for it?

Similar Messages

How to avoid 'duplicate data record' error message when loading master data

Dear Experts
We have a custom extractor on table CSKS called ZCOSTCENTER_ATTR. The settings of this datasource are the same as the settings of 0COSTCENTER_ATTR. The problem is that when loading to BW it seems that validity (DATEFROM and DATETO) is not taken into account. If there is a cost center with several entries having different validity, I get this duplicate data record error. There is no error when loading 0COSTCENTER_ATTR.
Enhancing 0COSTCENTER_ATTR to have one datasource instead of two is not an option.
I know that you can set ignore duplicates in the infopackage, but that is not a nice solution. 0COSTCENTER_ATTR can run without this!
Is there a trick you know to tell the system that the date fields are also part of the key??
Thank you for your help
Peter

Alessandro - ZCOSTCENTER_ATTR is loading 0COSTCENTER, just like 0COSTCENTER_ATTR.
Siggi - I don't have the error message described in the note.
"There are duplicates of the data record 2 & with the key 'NO010000122077 &' for characteristic 0COSTCENTER &."
In PSA the records are marked red with the same message (MSG no 191).
As you see the key does not contain the date when the record is valid. How do I add it? How is it working for 0COSTCENTER_ATTR with the same records? Is it done on the R/3 or on the BW side?
Thanks
Peter

Master data check not working when loading into and ODS object

Hi guys,
we are loading transactional data into an ODS from a flat file.
In the infopackage, we have checked the option :
"Do not update data if no master data exists for a characteristic".
This option seems to be unreliable :
For some characteristics (it seems those loaded using transfer rules (routines)), incorrect data is still loaded into the ODS even if no entry exist in the associated infoobject master data table.
Any help appreciated.
Many thanks !
Pierre-Yves

Hi Dear,
please delete all the incorrect master data from the master data characteristic first and then try to uploading the data again .It should work, because there migth be some master data created when data were loaded with out the check before.
And please check whether all your characteristic info object are of master data , I mean that in the infoobject defination you have checked the master data check box on the info object. If you have only text then it might fail the master data check.
hope this help.
cheers,
balaji
Message was edited by: Balaji NS

BPC 7.5 NW -- Data Manager Import Fails When Loading 40,000 Records?

Hi Experts,
Can't believe I'm posting this because the Data Manager component has always been one of the best parts of BPC. But, since we got SP04 applied last week, every IMPORT process that I've run that has more than 40,000 records fails out.
The result logs show that the CONVERT task completes just fine, but it doesn't really show the LOAD task. ...Not exactly sure what's going on here. So far I've also taken the following two steps to try for resolution:
(1.) Re-added the IMPORT package in Organize Package List from the Library to have a "fresh" version. Didn't help.
(2.) In the "Modify Package" screens, there is a PACKAGESIZE parameter that is 40,0000 by default... I've been able to locate that in BI using transaction RSA1 and have changed it to 10,000,000. Saved it. Tried it. Didn't help either
Has anyone seen this kind of behavior before?
Thanks,
Garrett

Update -- This problem may now be resolved.
I have been able to conduct test IMPORTs of 48,000, then 96,000 and then 1.7 million records. All were fine.
It turns out that that difference is that the text files were sorted by amount in the ones that failed. They were sorted by GLAccount in column A for the ones that succeeded.
Edit: Yep, all files loaded normally when re-sorted by GLACCOUNT, etc. on the left-hand side. Apparently, when you're doing a lot of records that might confuse the system or something
Edited by: Garrett Tedeman on Nov 18, 2010 11:41 AM

Srollpane scrolls when loaded data from XML, not when loaded data from ASP

Hi,
I load into scrollpane a swf, which has a dynamicly loaded
data. If I use the XML file, it works (the scrollbar is visible),
but if I use a asp file, which creates xml, it doesn't work (the
scrollbar is not visible). Any ideas?

Hi,
let say I have a A.swf and a B.swf. In A.swf I have a
scrollpane in to wich the B.swf is loaded. Below is the code in
B.swf. If I load the data from a asp file, the scrollbar in the
scrollpane is not visible, but if I use the xml file, the scrollbar
is visible.
What I've meant is that I think that Flash gets the same form
of data, no matter if I use the asp or xml, because the asp creates
the same xml form as I use in the xml file. I hope this makes any
sense.

Error 3 when loading external data

Hi Gurus!!
I am trying to load data from a flat file into a Cube. The load is done by a process chain and have worked perfectly before. The file is located on the application server.
Now I get the following error:
Cannot Update Request REQU_DESUFKD2XA1LDREQ0KEJZ2TJC in Data Target
Error 3 when loading external data
The file looks ok when i compare it with the ones i received earlier.
Any ideas what this error 3 is all about?
Thanks in advance!
Pontus

Hi
I Have had trouble raching the network for some time.
Problem solved. My misstake, It was the cube that were set to transactional.....
I will credit A.H.P.
Thanks everyone!
Regards
Pontus

Missing data when loading to PSA in 7.0

Hi all,
I have a problem with a 7.0 load.
I am loading a init load from R3 into DSO.
I have made a test extraction in R3 (RSA3) and I have 145258 records in R3, but when loading into PSA, I only retrieve 100.000 records... it is very extrange and maybe I am missing something from the new 7.0 version but I have no clue about what could be the error.
could anyone help me to solve this?
Many thanks!

Hi,
You are using BI 7.0,that means you are loading data to target from PSA using DTP.
May be you are using Full Update infopackage but while loading to target you are using Delta DTP.
Due to this it loding only the new changed records from PSA.
Make the DTP full update then it will pick all the records.
Kindly reward me some points if suggestion help you.
Regards,
Debjani
Edited by: Debjani Mukherjee on Aug 25, 2008 10:05 AM

Data loaded successfully in RSA3, but can not find data in BW PSA

Dear all:
We have custom datasource enhanced through BADI. For one column, in the source system RSA3, I can see this field populated with data, but in BW, when I load the data in PSA and check, this field is blank...
I tried seeral ways like re-replicate datasource, delete the datasource in BW and re-replicate, but not work.
Did anybody meet the same situation before? How to handle this issue?
Any post would be appreciated and thank you all in advance!
Tim

Hi Pavan:
Thanks for your reply.
I don't have any selection field for this datasource, and the number between ECC and BW matches. Actually the problem is only for one field, on ECC side RSA3, this field are populated with values, while in BW PSA, this column is there, but all the content are blank.
I do call one function module called to populate that field:
CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
      EXPORTING
      CLASS                      = ''
        CLASSTEXT                  = 'X'
        CLASSTYPE                  = '023'
      CLINT                      = 0
        FEATURES                   = 'X'
        LANGUAGE                   = SY-LANGU
        OBJECT                     = W_OBJECT
        OBJECTTABLE                = 'MCH1'
        KEY_DATE                   = SY-DATUM
        INITIAL_CHARACT            = 'X'
      NO_VALUE_DESCRIPT          =
        CHANGE_SERVICE_CLF         = 'X'
      INHERITED_CHAR             = ' '
      CHANGE_NUMBER              = ' '
      TABLES
        T_CLASS                    = ITAB_CLASS
        T_OBJECTDATA               = ITAB_OBJECTDATA
      I_SEL_CHARACTERISTIC       =
      T_NO_AUTH_CHARACT          =
      EXCEPTIONS
        NO_CLASSIFICATION          = 1
        NO_CLASSTYPES              = 2
        INVALID_CLASS_TYPE         = 3
        OTHERS                     = 4
    IF ITAB_OBJECTDATA IS NOT INITIAL.
       READ TABLE ITAB_OBJECTDATA INTO wa_OBJECTDATA WITH KEY atnam = 'ZLOBM_PLNTMFG'.
       <LS_ESMI_BW_MD_ZBATC0001>-ZORIGPLNT = wa_OBJECTDATA-AUSP1.
    ENDIF.
The code is very simple, it just call the standard FM and fetch the value from the return table, is there any thing wrong with my code?
Thanks!
Tim

"****Error from PSA****" error message when loading InfoCube

Hi all,
I am getting the following error message when loading transaction data to an InfoCube.
***Error from PSA***
This is not MD or Hierarchies (like previous messages in the forum)
Please advise.
Thanks,
Miki

Hi Miki,
Before just loading data into the infocube. Catchup PSA table and see the data into it.
Then u may find the solution.
But as ronald said this shouldnot be the complete error statement.
bye.

Error when loading data

Hi,
Please need help!
I get a strange error message when loading data from R/3 to BW. A lot of rows in the PSA get red with following description (I don't recognize the object REQUESTER):
"InfoObject REQUESTER does not contain alpa-conforming value 3511"
The help says:
"Diagnosis
The system checked whether the loaded InfoObject
value conforms to the conversion exit.The check
failed.
Forexample:
The value '1' was loaded into an InfoObject with alpha exit, even though the value '0000000001' was expected.
Systemresponse
The load process has failed or the erroneous records are displayed in the monitor. This does not depend on how error handling is set up.
                                                         Procedure
Find out why the data does not conform to the conversion exit, and, if possible, correct the cause. Possible causes are errors in Business Content or an error in a customer exit in the source system.
                                                         If you cannot correct the problem, you have the option of removing the conversion exit on the InfoObject. However, since the system has already been converted, duplicates appear in the system again.

Senor Roberto
I seem to have similar problem, the ALPHA conversion is existent at my Infoobject level and in my Comm Struc but not in mY Transfer_Structure/Transfer_Rules_.
I have already been running loads from ods to data target no problem and now out of a sudden the error msg
Err mess: "The value '1' was loaded into an InfoObject with alpha exit, even though the value '0000000001' was expected", appears.
I have tried removing alpha conversion from info object as u have recommended, and I have transported to QA but in QA the infooject status color is grey and it dosen't allow me to activate what should i do? What i would really like is to load ods data to data target without ever seeing this error again .
Any thoughts
Ciao

ABAP short dump when loading data into Infocube

Hello All,
I am getting an ABAP short dump error when loading data into Infocube. I tried to load data from PSA and ODS.
I ran the code to compress the Infocube, no improvement still getting the same error.
Error Analysis:
A raise statement in the program "SAPLRSDU_PART" raised in the exception.
Internal Notes:
The termination occured in the function "ab_i fune" of the SAP Basis system. Specifically in the line 2316 of the module "//bas/620/src/krn/runt/abfunc. C#18".
The internal operation just processed is "FUNE"
Advance thanks !!!
Siv

Hello Siv,
try to run program SAP_DROP_EMPTY_FPARTITIONS to display existing partitions. Then compare it to the number of uncompressed requests. Maybe there's a mismatch.
SAP notes that might help: 385163, 590370
Regards,
Marc
SAP NetWeaver RIG, US BI

" Error when inserting in PSA table RSTSODSPART" when loading into PSA

Hello,
Did anyone encounter something similar, and found a solution ?
BI 7.0 - EnhP 1 - SP5
When loading data from R/3 into PSA, we encounter following error message:
" Error when inserting in PSA table RSTSODSPART"
===============================================================
- the first datapackage is written successfully to PSA,
but from the second datapackage onwards the error message pops-up
" Error when inserting in PSA table RSTSODSPART"
- The original dataselection in the infopackage is somewhere stored
If the selection in the InfoPackage is reduced (e.g. only one document i.o. a period)
it stil starts loading according the original selection (the month)
- If we create a new InfoPackage and select very few data (only one datapackage)
then we can load to PSA succesfully, but when we load to DSO we can't activate the DSO.
- We remarked that:
Two versions of the PSA exist for that datasource 0FI_GL_40:
a Table(/BIC/B0000555000) in version 1 exists,
a Table(/BIC/B0000555001) in version 2 exists
Thanks in advance,
Best regards

Hello All,
We had a problem similar to what Ilse Depoortere describes. The problem happens in our BW QA system a few days/weeks after it has been copied from Production. Data loads start failing with these two error messages:
RSM2 851 - Error when writing in PSA (Caller 32)
RSAR 130 - Error 7 when adding to PSA (Caller 70)
We have just implemented the fix described in note 1340371 (replaced the LIB_DBSL with patch level 247), and the problem is gone. Failed data load process chains can be restarted and finish successfully.
This has been a really useful discussion, thanks all! And thanks to my coworker Bob who found it.
Vince Vajda

Error 1 when loading data

guys can u pls help me out regarding an error called Error 1 when loading external data in the infopackage.
when I click on start data load am getting that error. Waiting for the answer.

Hi,
Actually, this error has little to do with lowercase letters. At least upto PSA level data should be loaded in most cases.
Error number 1 occurred when loading external data:
1. Error when reading the file (access rights, file name, ...)
2. File size or number of records does not correspond to the data in the control file
3. Error when generating the IDoc
4. File contains invalid data (errors with an arithmetic operation or data conversion)
I had the situation when error 1 and file not found error occurred. The reason was in very little memory. The system couldn't open the file. Check it with basis guys.
Regds,
Priyanka

How to load data for attribute of Master Data Object from PSA

Hi Experts,
I have a Master data Object, 0Equipment.
I loaded data to PSA from R/3.
I am able to see records for Zxxx field in PSA.
I have added a new mapping object Zxxx in BW.
But, when I loaded the data from PSA to Master Data Object, 0Equipment,
I am not able to see records for Zxxx which is an attribute of 0Equipment.
I do see the records for rest of the attributes of this Master Data Object.
I tried deleting and reloading the data
and treid to check attribute change run
Please let me know if I am missing something in loading the Master Data from PSA

Jr Roberto,
I checked all the records in Maintain Master Data and did set the Zxxx Not Equal To Blank.
No data for Zxxx InfoObject, eventhough there is data in the corresponding field in PSA.
I did 1:1 mapping.
Need help

Errors when loading data to ODS

Hi,
I am getting the following dump when loading data to ODS
whta might be the problem
Runtime Error          MESSAGE_TYPE_X
Date and Time          29.09.2006 14:26:52
ShrtText
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
Short text of error message:
Test message: SDOK_GET_PHIO_ACCESS 001
Technical information about the message:
Message classe...... "1R"
Number.............. 000
Variable 1.......... "SDOK_GET_PHIO_ACCESS"
Variable 2.......... 001
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPLSDCL" or "LSDCLF00"
"INTERNAL_ERROR"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "bomw093a"
Network address.......... "132.186.125.66"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 801586"
Character length......... 8 Bits
Pointer length........... 32 Bits
Work process number...... 16
Short dump setting....... "full"
Database server.......... "BOMW093A"
Database type............ "ORACLE"
Database name............ "BIW"
Database owner........... "SAPDAT"
Character set............ "English_United State"
SAP kernel............... "640"
Created on............... "Nov 4 2004 23:26:03"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "OCI_920_SHARE "
Patch level.............. "43"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.1.7.., ORACLE 9.2.0.."
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory usage.............
Roll..................... 8112
EM....................... 6271776
Heap..................... 0
Page..................... 24576
MM Used.................. 3921120
MM Free.................. 258392
SAP Release.............. "640"
User and Transaction
Client.............. 800
User................ "IC881147"
Language key........ "E"
Transaction......... " "
Program............. "SAPLSDCL"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "SAPLSDCL" in "INTERNAL_ERROR".
The main program was "RSRD_BROADCAST_PROCESSOR ".
The termination occurred in line 25 of the source code of the (Include)
program "LSDCLF00"
of the source code of program "LSDCLF00" (when calling the editor 250).
The program "SAPLSDCL" was started as a background job.
Job name........ "SECOQUERY"
Job initiator... "IC881147"
Job number...... 14265102
Source Code Extract
Line
SourceCde
1
2
INCLUDE LSDCLF00                                                   *
3
4
5
6
      FORM INTERNAL_ERROR                                           *
7
8
      Handles unexpected error conditions (internal errors)
9
10
--> VALUE(U_ROUTINE)    Routine/function module where error occured
11
--> VALUE(U_ERROR_CODE) Identifier in routine (e.g. number)
12
--> VALUE(U_VAR1)       Variable containing further information
13
--> VALUE(U_VAR2)       Variable containing further information
14
--> VALUE(U_VAR3)       Variable containing further information
15
--> VALUE(U_VAR4)       Variable containing further information
16
17
form internal_error
18
using value(u_routine)
19
value(u_error_code)
20
value(u_var1)
21
value(u_var2)
22
value(u_var3)
23
value(u_var4).
24
>>>>>
message x000 with u_routine u_error_code u_var1 u_var2.
26
27
endform.
28
29
30
*&      Form BAD_OBJECT_TO_SYMSG
31
32
      maps error information in u_bad_object into system message
33
      variables
34
35
--> VALUE(U_BAD_OBJECT) structure containing error information
36
37
form bad_object_to_symsg
38
using value(u_bad_object) type sdokerrmsg.
39
40
sy-msgid = u_bad_object-id.
41
sy-msgty = u_bad_object-type.
42
sy-msgno = u_bad_object-no.
43
sy-msgv1 = u_bad_object-v1.
44
sy-msgv2 = u_bad_object-v2.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
4
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
Report Dissemaintion Framework: Executing the Transferred Settings
SY-MSGTY
X
SY-MSGID
1R
SY-MSGNO
000
SY-MSGV1
SDOK_GET_PHIO_ACCESS
SY-MSGV2
001
SY-MSGV3
SY-MSGV4
Active Calls/Events
No.   Ty.          Program                             Include                             Line
Name
15 FORM         SAPLSDCL                            LSDCLF00                               25
INTERNAL_ERROR
14 FORM         SAPLSDCI                            LSDCIU13                              303
PHIO_GET_CONTENT_ACCESS
13 FUNCTION     SAPLSDCI                            LSDCIU13                              113
SDOK_PHIO_GET_CONTENT_ACCESS
12 FUNCTION     SAPLSKWF_CONTENT                    LSKWF_CONTENTU02                       63
SKWF_PHIO_CONTENT_ACCESS_GET
11 METHOD       CL_RSRA_KWF_UTILITIES=========CP    CL_RSRA_KWF_UTILITIES=========CM00B    50
CL_RSRA_KWF_UTILITIES=>COPY_MIME_TO_FOLDER
10 METHOD       CL_RSRA_KWF_TMPL==============CP    CL_RSRA_KWF_TMPL==============CM002    28
CL_RSRA_KWF_TMPL=>GET_STYLESHEET
9 METHOD       CL_RSRA_KWF_TMPL==============CP    CL_RSRA_KWF_TMPL==============CM001   227
CL_RSRA_KWF_TMPL=>CONSTRUCTOR
8 METHOD       CL_RSRA_ENGINE_BC=============CP    CL_RSRA_ENGINE_BC=============CM010     9
CL_RSRA_ENGINE_BC=>SET_TEMPLATE_FOLDER
7 METHOD       CL_RSRA_ENGINE_BC=============CP    CL_RSRA_ENGINE_BC=============CM001    75
CL_RSRA_ENGINE_BC=>CONSTRUCTOR
6 METHOD       CL_RSRA_JOB===================CP    CL_RSRA_JOB===================CM003    47
CL_RSRA_JOB=>EXECUTE_SINGLE
5 METHOD       CL_RSRA_JOB===================CP    CL_RSRA_JOB===================CM00E    14
CL_RSRA_JOB=>EXECUTE_SINGLE_RC
4 METHOD       CL_RSRD_PRODUCER_RA===========CP    CL_RSRD_PRODUCER_RA===========CM001   147
CL_RSRD_PRODUCER_RA=>IF_RSRD_F_PRODUCER_RT~PRODUCE
3 METHOD       CL_RSRD_SETTING===============CP    CL_RSRD_SETTING===============CM005    28
CL_RSRD_SETTING=>EXECUTE_NODES
2 METHOD       CL_RSRD_SETTING===============CP    CL_RSRD_SETTING===============CM002    73
CL_RSRD_SETTING=>EXECUTE
1 EVENT        RSRD_BROADCAST_PROCESSOR            RSRD_BROADCAST_PROCESSOR              197
START-OF-SELECTION
Chosen variables
Name
Val.
No.      15 Ty.          FORM
Name INTERNAL_ERROR
U_ROUTINE
SDOK_GET_PHIO_ACCESS
54445445554445444455
34FBF754F089FF133533
SY-MSGV1
SDOK_GET_PHIO_ACCESS
54445445554445444455222222222222222222222222222222
34FBF754F089FF133533000000000000000000000000000000
U_ERROR_CODE
001
333
001
SY-MSGV2
001
33322222222222222222222222222222222222222222222222
00100000000000000000000000000000000000000000000000
U_VAR1
2
0
SY-MSGV3
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SDOKI_MODE_DELETE
5
0000
5000
U_VAR2
2
0
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
No.      14 Ty.          FORM
Name PHIO_GET_CONTENT_ACCESS
SYST
####################################################A#######P###############è#################
0000000000000000000000000000000000000000000000000000400000005000000000000000E00000000000000000
0000000010002000000000000000000000000000400000001000100010000000000000000000840000000000000000
PHIO_OBJECT_ID-CLASS
2222222222
0000000000
DUMMY_VERSTYPE
0
3
0
DUMMY_FCT_EXPORT
222222222222222222222222222222
000000000000000000000000000000
DUMMY_FCT_IMPORT
222222222222222222222222222222
000000000000000000000000000000
DUMMY_FCT_DELETE
222222222222222222222222222222
000000000000000000000000000000
FCT_VIEW
222222222222222222222222222222
000000000000000000000000000000
BUFF_XPIRE
000000000000
333333333333
000000000000
NO_BUFFER
2
0
SUBRC_AUX
3
0000
3000
SDOKA_EVENT_PH_FROM_REL_PRE
0022
3333
0022
SCREEN
%_17SNS0001592815_%_%_%_%_%_%_
2533545333333333352525252525252222222222222222222222222222222222222222222222222222222222222222
5F173E30001592815F5F5F5F5F5F5F0000000000000000000000000000000000000000000000000000000000000000
<%_TABLE_SDOKSTRE>
SY-XFORM
CONVERSION_EXIT
444545544454545222222222222222
3FE65239FEF5894000000000000000
CONTEXT[]
Table IT_5544[0x89]
FUNCTION=SKWF_PHIO_CONTENT_ACCESS_GETDATA=CONTEXT[]
Table reference: 324
TABH+ 0(20) = 00000000801CE03C0000000044010000A8150000
TABH+ 20(20) = 0000000059000000FFFFFFFF047B0200D00E0000
TABH+ 40( 8) = 10000000C1248000
store        = 0x00000000
ext1         = 0x801CE03C
shmId        = 0     (0x00000000)
id           = 324   (0x44010000)
label        = 5544 (0xA8150000)
fill         = 0     (0x00000000)
leng         = 89    (0x59000000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000058
occu         = 16    (0x10000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
collHash     = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = Not allocated
pghook       = Not allocated
idxPtr       = Not allocated
refCount     = Not allocated
tstRefCount = Not allocated
lineAdmin    = Not allocated
lineAlloc    = Not allocated
store_id     = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook      = 0x00000000
hsdir        = 0x00000000
ext2         = 0x381CE03C
>>>>> 2nd level extension part <<<<<
tabhBack     = 0x98DC033D
delta_head   = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func      = 0x00000000
pb_handle    = 0x00000000
CONTEXT
22222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PROPERTIES[]
Table[initial]
PROPERTIES
22222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No.      13 Ty.          FUNCTION
Name SDOK_PHIO_GET_CONTENT_ACCESS
ALLOW_MODEL
2
0
CACHE_SERVER
0000000000
2222222222222222222222222222222222222222222222222222222222222222333333333322222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
CLIENT
800
333
800
CONTENT_ONLY
X
5
8
CONTENT_OR_URL_ONLY
2
0
OBJECT_ID
222222222222222222222222222222222222222222
000000000000000000000000000000000000000000
RAW_MODE
2
0
TEXT_AS_STREAM
X
5
8
USE_URL_AT
2
0
ACCESS_MODE
00
33
00
DOCUMENT_HTTPS_URL
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
DOCUMENT_URL
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
MODEL_RETURNED
2
0
COMPONENTS[]
Table[initial]
COMPONENT_ACCESS[]
Table IT_5533[0x8616]
CLASS=CL_RSRA_KWF_UTILITIESMETHOD=COPY_MIME_TO_FOLDERDATA=L_T_COMPONENT_ACCESS
Table reference: 337
TABH+ 0(20) = 00000000481BE03C00000000510100009D150000
TABH+ 20(20) = 00000000A8210000FFFFFFFF04C5010088190000
TABH+ 40( 8) = 01000000C1248000
store        = 0x00000000
ext1         = 0x481BE03C
shmId        = 0     (0x00000000)
id           = 337   (0x51010000)
label        = 5533 (0x9D150000)
fill         = 0     (0x00000000)
leng         = 8616 (0xA8210000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000107
occu         = 1     (0x01000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
collHash     = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = Not allocated
pghook       = Not allocated
idxPtr       = Not allocated
refCount     = Not allocated
tstRefCount = Not allocated
lineAdmin    = Not allocated
lineAlloc    = Not allocated
store_id     = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook      = 0x00000000
hsdir        = 0x00000000
ext2         = 0x001BE03C
>>>>> 2nd level extension part <<<<<
tabhBack     = 0x985D043D
delta_head   = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func      = 0x00000000
pb_handle    = 0x00000000
CONTEXT[]
Table IT_5544[0x89]
FILE_CONTENT_ASCII[]
Table IT_5534[0x1022]
CLASS=CL_RSRA_KWF_UTILITIESMETHOD=COPY_MIME_TO_FOLDERDATA=L_T_FILE_CONTENT_ASCII
Table reference: 312
TABH+ 0(20) = 00000000B01BE03C00000000380100009E150000
TABH+ 20(20) = 00000000FE030000FFFFFFFF04C50100D81A0000
TABH+ 40( 8) = 10000000C1248000
store        = 0x00000000
ext1         = 0xB01BE03C
shmId        = 0     (0x00000000)
id           = 312   (0x38010000)
label        = 5534 (0x9E150000)
fill         = 0     (0x00000000)
leng         = 1022 (0xFE030000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000113
occu         = 16    (0x10000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
collHash     = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = Not allocated
pghook       = Not allocated
idxPtr       = Not allocated
refCount     = Not allocated
tstRefCount = Not allocated
lineAdmin    = Not allocated
lineAlloc    = Not allocated
store_id     = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook      = 0x00000000
hsdir        = 0x00000000
ext2         = 0x681BE03C
>>>>> 2nd level extension part <<<<<
tabhBack     = 0xB813043D
delta_head   = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func      = 0x00000000
pb_handle    = 0x00000000
FILE_CONTENT_BINARY[]
Table IT_5535[0x1022]
CLASS=CL_RSRA_KWF_UTILITIESMETHOD=COPY_MIME_TO_FOLDERDATA=L_T_FILE_CONTENT_BINARY
Table reference: 325
TABH+ 0(20) = 00000000181CE03C00000000450100009F150000
TABH+ 20(20) = 00000000FE030000FFFFFFFF04C50100101B0000
TABH+ 40( 8) = 10000000C1248000
store        = 0x00000000
ext1         = 0x181CE03C
shmId        = 0     (0x00000000)
id           = 325   (0x45010000)
label        = 5535 (0x9F150000)
fill         = 0     (0x00000000)
leng         = 1022 (0xFE030000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000114
occu         = 16    (0x10000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
collHash     = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = Not allocated
pghook       = Not allocated
idxPtr       = Not allocated
refCount     = Not allocated
tstRefCount = Not allocated
lineAdmin    = Not allocated
lineAlloc    = Not allocated
store_id     = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook      = 0x00000000
hsdir        = 0x00000000
ext2         = 0xD01BE03C
>>>>> 2nd level extension part <<<<<
tabhBack     = 0xC08FD33C
delta_head   = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func      = 0x00000000
pb_handle    = 0x00000000
PROPERTIES[]
Table[initial]
COMPONENT_ACCESS
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
FILE_CONTENT_ASCII
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
FILE_CONTENT_BINARY
0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.1.
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
OBJECT_ID_AUX
222222222222222222222222222222222222222222
000000000000000000000000000000000000000000
X_DOCUMENT_URL
X
5
8
X_DOCUMENT_HTTPS_URL
X
5
8
X_COMPONENT_ACCESS
X
5
8
SUBRC_AUX
0
0000
0000
%_DUMMY$$
2222
0000
%_SPACE
2
0
SY-REPID
SAPLSDCI
5454544422222222222222222222222222222222
310C343900000000000000000000000000000000
No.      12 Ty.          FUNCTION
Name SKWF_PHIO_CONTENT_ACCESS_GET
CACHE_SERVER
0000000000
2222222222222222222222222222222222222222222222222222222222222222333333333322222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PHIO
2222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000
USE_URL_AT
2
0
X_ALLOW_MODEL
2
0
X_CONTENT_ONLY
X
5
8
X_CONTENT_OR_URL_ONLY
2
0
X_RAW_MODE
2
0
X_TEXT_AS_STREAM
X
5
8
ACCESS_MODE
00
33
00
DOCUMENT_HTTPS_URL
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
DOCUMENT_URL
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ERROR
000
2222222222222222222223332222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
X_MODEL_RETURNED
2
0
COMPONENT_ACCESS[]
Table IT_5533[0x8616]
CONTEXT[]
Table IT_5544[0x89]
FILE_CONTENT_ASCII[]
Table IT_5534[0x1022]
FILE_CONTENT_BINARY[]
Table IT_5535[0x1022]
PROPERTIES[]
Table[initial]
SKWFA_C_ACT_READ
03
33
03
SYST-REPID
SAPLSKWF_CONTENT
5454545454445445222222222222222222222222
310C3B76F3FE45E4000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PHIO+1(42)
222222222222222222222222222222222222222222
000000000000000000000000000000000000000000
CL_ABAP_TABLEDESCR=>TABLEKIND_STD
S
5
3
SKWFC_YES
X
5
8
No.      11 Ty.          METHOD
Name CL_RSRA_KWF_UTILITIES=>COPY_MIME_TO_FOLDER
I_S_MIME_IO
FM_FOLDER 3AA00E1E0D0E3DCBE10000000A1144B5
4454444452234433434343434444333333334333343
6DF6FC4520031100515040534325100000001114425
I_S_FOLDER_IO
FBW_FLD    08BSWBLVV6N1IJCIG3VHEX2H8
4455444222233455445534344444354453432222222
627F6C40000082372C666E19A397368582880000000
L_T_PROPERTY_REQUEST
Table IT_5512[1x25]
CLASS=CL_RSRA_KWF_UTILITIESMETHOD=COPY_MIME_TO_FOLDERDATA=L_T_PROPERTY_REQUEST
Table reference: 316
TABH+ 0(20) = 28D5D23C68D5D23C000000003C01000088150000
TABH+ 20(20) = 0100000019000000FFFFFFFF04C5010038110000
TABH+ 40( 8) = 10000000C1248400
store        = 0x28D5D23C
ext1         = 0x68D5D23C
shmId        = 0     (0x00000000)
id           = 316   (0x3C010000)
label        = 5512 (0x88150000)
fill         = 1     (0x01000000)
leng         = 25    (0x19000000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000069
occu         = 16    (0x10000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
collHash     = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = 0xC00BE03C
pghook       = 0x00000000
idxPtr       = 0x00000000
refCount     = 0     (0x00000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 16    (0x10000000)
lineAlloc    = 16    (0x10000000)
store_id     = 3644 (0x3C0E0000)
shmIsReadOnly = 0     (0x00000000)
>>>>> 1st level extension part <<<<<
regHook      = 0x00000000
hsdir        = 0x00000000
ext2         = 0x600DE03C
>>>>> 2nd level extension part <<<<<
tabhBack     = 0x98D5033D
delta_head   = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func      = 0x00000000
pb_handle    = 0x00000000
L_S_PROPERTY_REQUEST
KW_RELATIVE_URL
4555444545455542222222222
B7F25C14965F52C0000000000
L_T_PHIO
Table IT_5494[1x43]
CLASS=CL_RSRA_KWF_UTILITIESMETHOD=COPY_MIME_TO_FOLDERDATA=L_T_PHIO
Table reference: 309
TABH+ 0(20) = E8D4D23CE0D3D23C000000003501000076150000
TABH+ 20(20) = 010000002B000000FFFFFFFF04C5010018120000
TABH+ 40( 8) = 10000000C1248000
store        = 0xE8D4D23C
ext1         = 0xE0D3D23C
shmId        = 0     (0x00000000)
id           = 309   (0x35010000)
label        = 5494 (0x76150000)
fill         = 1     (0x01000000)
leng         = 43    (0x2B000000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000073
occu         = 16    (0x10000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
collHash     = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = 0x2010E03C
pghook       = 0x00000000
idxPtr       = 0x00000000
refCount     = 0     (0x00000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 16    (0x10000000)
lineAlloc    = 16    (0x10000000)
store_id     = 3643 (0x3B0E0000)
shmIsReadOnly = 0     (0x00000000)

Hi priya,
Not sure: check syntax in your Update Roules, also at level of start routine.
Ciao.
Riccardo.

Data incorrect in PSA when Loading.

Similar Messages

Maybe you are looking for