Data Integration from E-Biz Suite to Hyperion Planning

Hi Experts,
I am using EPM 11.1.1.1.0.
I have a requirement of integrating data from Oracle Gl to Hyperion.
I am going to use ODI for achieving the same but i observed a fact in GL around which i need some help.
Oracle GL maintains a relation between the entities and acconuts, (e.g a particular entity budgets against some specific accounts) ,however i do not see how in Hyperion I can replicate the same between the Entity and Accounts dimensions.
Can somebody please put some light on this...?
Any help will be greatly appreciated.
Regards.
Alicia
Edited by: Alicia on Aug 10, 2009 10:52 PM

Alicia,
It sounds like you're talking about cross-validation rules. There are two issues this lack of functionality presents in Hyperion Planning:
1) You want forms to be dynamic so that users only see the Entity/Account combinations that are relevant.
2) You want security to prevent users from sending data to invalid Entity/Account combinations.
Hyperion Planning doesn't support this requirement well, although there are some workarounds to "simulate" cross-dimensional security.
This post may help explain:
How to enforce valid member combinations in Planning?
Hope this helps,
- Jake

Similar Messages

  • Data Integration from Oracle GL to Hyperion  Planning

    Hi all,
    Can I knw the steps for extarcting the from Oracle GL Tables to Hyperion Planning?
    We have installed hyperion 9.3.1 and ODI 10.
    Please let me know how will we do this process by using ODI?
    Thanks

    Hi User##########,
    In a nutshell you need to do the following...
    1. Create a Project in ODI
    2. Define your Source and Target data stores in Topology
    3. Import the appropriate Knowledge Modules
    4. Reverse Engineer your Source and Target modules to create a model
    5. Create an integration to load from your Source (Oracle GL) to your Target (Hyperion Planning -- I actually prefer to load the data directly to Essbase)
    I just did this last month. When loading the data I used an Essbase load rule to ensure Essbase knew the column order.
    I was also able to load data via ODI from a flat file WITHOUT a load rule but the order of the data in the file was very important. I was also not able to substitute or alter the information in the integration when this was done. So in the end I still needed to have a load rule handy.
    I'd recommend reading up on the ODI documentation for this -- some of it is actually quite good. http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_6.htm Check out the "Oracle Data Integrator Adapter for Hyperion xxx" section.
    -Chris
    P.S. Check out John Goodwin's blog -- there's some neat stuff in there and you'll probably figure out some neat stuff on your own too.

  • Problems with data migration from E-Business Suite 11i to OID.

    Hi everyone i'm trying to migrate data between Oracle E-Business Suite Release 11i and Oracle Internet Directory.
    I'm following the guidelines from the document: Integrating Oracle E-Business Suite Release 11i with Oracle Internet Directory and Oracle Single Sign On.
    I have created a intermediate LDIF file that will converted to final LDIF file by ldifmigrator utility. But an error occurs when I try to disable a certain profile in the phase of converting the Intermediate LDIF file to final LDIF file. I am running the oidprovtool as cn=orcladmin and the syntax is as follows:
    oidprovtool operation=disable \
    ldap_host=portal10g.skyrr.is \
    ldap_port=3060 \
    ldap_user_dn=cn=oracleadm \
    ldap_user_password=mypasswd \
    application_dn="orclApplicatonCommonName=K95LSP,cn=EBusiness,cn=Products,cn=OracleContext,dc=skyrr,dc=is" \
    profile_mode=BOTH
    The command returns:
    ERROR: Invalid directory credentials. Please check ldap_user_dn and ldap_user_password parameters.
    I'm able to bind whith ldapbind and the syntax is as follows:
    ldapbind -h portal10g.skyrr.is \
    -p 3060
    -D cn=orcladmin
    -w ******
    Can anyone help my to resolve the "Invalid directory credentials" error so that I can continue my Applications 11i migration.
    I must admit that i'm new to Oracle Internet Directory and all advices and pointers are highly appreciated.
    Regards,
    Sammi

    Hello,
    As Scott says, the fact that you're using HTTPS rather than HTTP is pretty much transparent to the mod_plsql handler (well in the respect that you don't really need to do anything 'special' in your application I mean).
    John.
    http://jes.blogs.shellprompt.net
    http://apex-evangelists.com

  • Confused How to push Data from Oracle DB Tables into Hyperion Planning?

    HI
    I m Newbie to ODI. My DataSource is Oracle 11g Database (HR Tables) and my Target is Hyperion Planning.
    I successful imported Oracle DB HR tables into ODI and Hyperion Planning Dimensions Like(Employee) but i dont understand in " ODI Interface" how i am going to do Mapping between Oracle tables and Planning application Dimension, am i doing wrong way?
    I am confused if i have to push Data from Oracle 10g HR Tables into Hyperion Planning am i following right approach ?
    Looking for your guideline...
    Regards
    Sher

    Hi John
    Well i have working knowledge in ODI, i did whole complete cycle and i did customization project for Oracle EBS to Data warehouse though ODI.
    What, I am NOT able to figure out How to LINK Hyperion Planning Outline to Oracle EBS HR Tables. cause in Hyperion Outline i m able to view Dimensions Not particular Column to map with EBS HR Table (column).
    Eample:
    In EBS HR we have Employee Number in Per_all_people_f but in Hyperion Planning Dimension is ONLY Employee.
    Your response highly appreciated.
    Chreeez
    Sher

  • Error in Data Transfer : From CO-PA to SOP Flexible Planning

    Hi Friends
    I am working on a Scenario of Transferring CO-PA data to Flexible Planning, I am encountering few problems, I have done the followig steps, request you to check and get back to me..
    The following configuration steps are done with Example;
    Characteristic assignment
    u2022 Sales Organization
    u2022 Region
    u2022 Plant
    u2022 Material Number
    u2022 Material Group
    Key figure(s) assignment
    u2022 Sales Quantity
    Assignment: Information structure - operating concern
    S555 u2013 Z001
    Define activities Z1
    Mass Processing Job : ZSO-PA
    We are able to transfer data from CO-PA to standard SOP, But we tried for transfer to Flexible Planning SOP by creating Mass Processing Job setting as below configuration path.
    Production -> Sales & Operations Planning (SOP) ->Functions -> Mass Processing -> Transfer LIS / CO-PA
    After executing Job MC8G - Schedule, we checked in Tcode - MC8I u2013 Check, Status: Processed with errors, And also data are not displayed in Tcode : MC95 for Material & active version.
    We couldnu2019t find log for error status.
    What is the method / Procedure for transfer data to Flexible Planning SOP?
    Please get back to me.

    Dear,
    Status:            Processed with errors ok
    Activities checked:? what is the error message here like
       COPY
           Planning type in activity and job not identical
           Planning type of job:  SOPKAPAM
           Plng. type of activity:Z004PLAN
    When checking a mass processing job in SOP/flexible planning (Transaction MC8I), in the log error message "Activity and COPA profile have different planning versions?
    Or planned/actual indicator in the COPA profile?
    Version should be        A00
    Please check the MC8S. Then an Avtivity in MC8T
    after you create the job in MC8D with the acitivity you have defined for your info structure.
    After that check in MD62 for plan value.
    Regards,
    R.Brahmankar

  • Hyperion Planning and eBusiness Suite ODI integration

    Hi,
    I have to integrate eBusiness Suite and Hyperion Planning, mostly exporting data from eBusiness Suite to load into Hyperion Planning. I'm allready using eBusiness Suite connectors.
    I'd like to know if there is some start point to understand eBS model besides http://etrm.oracle.com. I found that the technical reference is not of much help to understand where I can find the proper info that I need or what kind of info provides each column/table.
    Thanks!

    Hi Pratik, thank you for your comment. Both links are very helpful. Although I think I wasn't precise enough on my initial post. Im trying to extract info from several modules of eBS (GL, PA, PO, INV, AP and others) to a single table and my approach for the extract is using one source set for each eBS module on ODI interface (with the corresponding tables from each module on each source set).
    The main info I need on this approach is how to avoid exporting duplicate info, because I know that some info is present on several modules.
    I hope I was clear on my explanation, do you have any advice on where can I get that info?. Thank you

  • Oracle GL Integration with Hyperion Planning

    Dear All,
    I need to integrate Oracle GL with Hyperion Planning.
    My Question are:
    1) Without any adapters, we can do this integration(Using PL/SQL). It is Possible?
    2) Any document is available for intergration using the adapters(DIM/ODI).
    ODI - Using ODI, one way of integration is possible(Oracle GL to Planning)
    DIM - Using DIM, two way of integration is possible(Oracle GL to Planning & Planning to Oracle GL)
    can u guide me in this situtation.
    Thanks,
    PC

    H John,
    Thanks for the prompt reply.
    I am using Hyperion 9.3.1 with Oracle 10g. This is the first time, i am trying to do the integration with Oracle GL. My client dont have licenses for DIM, they are not ready to buy the licenses.
    There is anyway to load the essbase cubes through Oracle tables.
    John, This is my idea(Can u please suggest me on this). I am doing this in a test environment.
    1) From Oralce GL server, I am taking the Trial Balance values into flat files
    2) I am creating one Oracle table for TB_ORAGL(In Planning Server)
    3) In Planning server, i am importing the flat files(TB_ORAGL) to the Oracle
    4) From oracle table(TB_ORAGL), i am trying importing the data to essbase cubes using data load.
    Vice versa steps for Hyperion Planning to Oracle GL.
    can u guide me in this situtation.
    Thanks,
    PC
    Edited by: dwhpc on Oct 21, 2009 1:55 PM

  • Periodic Data Extract from HFM

    Does anyone have any tips/suggestions for extracting periodic data out of HFM? Currently in our application we are loading year to date data from Oracle into HFM using FDM. When we go to extract periodic data in the application it skips over the ghost numbers that are generated in HFM. In order for the data to be complete though we need those ghost numbers to come out in the extract file. Any help would be greatly appreciated. Thank you!

    The ghost numbers I am referring to are ones generated in HFM. For example on an income statement if you load $1,000 as the January YTD Balance and load $0 as the February YTD Balance, HFM will create a ghost (gray) $-1000 to make the February YTD Balance truly Zero. I need to somehow extract that -1000 amount to make a true periodic data file that will be loaded into Hyperion Planning. Thanks!

  • Data extract from HFM

    Hi,
    There is a need to get TB data from HFM in a format that's got account info as debits and credits(for a journal load to Peoplesoft), and has a control field at the end, how can this be best achived.
    Regards

    The ghost numbers I am referring to are ones generated in HFM. For example on an income statement if you load $1,000 as the January YTD Balance and load $0 as the February YTD Balance, HFM will create a ghost (gray) $-1000 to make the February YTD Balance truly Zero. I need to somehow extract that -1000 amount to make a true periodic data file that will be loaded into Hyperion Planning. Thanks!

  • Error While Creating Essbase Database From Hyperion Planning

    Hi,
    While creating the Essbase Database From the 'Manage Database' in Hyperion Planning, I am getting the following error:
    com.hyperion.planning.olap.EssbaseException: Account (1060000)
    It gets stuck at Adding Dimensions.
    I have tried reconfiguring Planning, but no luck.
    My Relation Repository is MS SQL Server 2005 and the Essbase and Shared Services are on a Linux box.
    I am getting the following error in the Planning log
    [12-Nov-2009 10:50:41]: Propegating external event[ FROM_ID: 68b6dbf1 Class: class com.hyperion.planning.sql.HspLock Object Type: -1 Primary Key: 50001 ]
    [12-Nov-2009 10:50:41]: Processing cube: Plan1
    [12-Nov-2009 10:50:41]: Setting System CFG properties for Attribute Dimensions
    [12-Nov-2009 10:50:41]: Adding dimension: Account
    [12-Nov-2009 10:50:41]: Closing outlines
    com.hyperion.planning.olap.EssbaseException: Account (1060000)
         at com.hyperion.planning.olap.HspEssbaseOutlineAPI.EssAddMemberEx(Native Method)
         at com.hyperion.planning.olap.HspCubeRefreshTask.addDimension(Unknown Source)
         at com.hyperion.planning.olap.HspCubeRefreshTask.addDimensionsAndMembers(Unknown Source)
         at com.hyperion.planning.olap.HspCubeRefreshTask.buildOutlines(Unknown Source)
         at com.hyperion.planning.olap.HspCubeRefreshTask.run(Unknown Source)
         at com.hyperion.planning.HspJSImpl.runCubeRefresh(Unknown Source)
         at com.hyperion.planning.HyperionPlanningBean.runCubeRefresh(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:294)
         at sun.rmi.transport.Transport$1.run(Transport.java:153)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.rmi.transport.Transport.serviceCall(Transport.java:149)
         at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
         at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
         at java.lang.Thread.run(Thread.java:595)
    Thanks for your help.
    Edited by: user524093 on Nov 12, 2009 4:38 PM

    Have you tried restarting the services and giving it a try?
    Which version of Essbase/Planning are you on?
    If your Essbase server name has more than 30 characters, please use NODENAME with short server name.

  • Planning error : hyperion.planning.DuplicateUserException

    I am unable to log into planning app after we refreshed our test sqlserver with prod data. I get the followeing error
    hyperion.planning.DuplicateUserException: Another user with the name hypadmin already exists.
    com.hyperion.planning.HspRuntimeException: Failed to sync with user provisioning.
    any ideas ?
    I have tried updating the sid value in HSP_USERS table with the old values -- no luck.
    Please help.

    Sounds like you have not done the migration correctly.
    I take it hypadmin is the application owner and a native user.
    If so you should store the correct native sid on your test environment.
    Have a look at a working planning app on your test environment, go into the relational tables
    look at table HSP_USERS and store the sid for id 50001
    Update the other planning app in your test environment with the correct stored sid in the same table.
    Restart planning.
    Also run the updateusers utility in the planning bin/utiliites directory.
    Its much easier if you create planning applications with the default admin account as the sid stays the same across environments.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Use ODI to Extract Data from Hyperion Planning & Budgeting report to Excel

    Hello
    Can someone tell me please how to Extract Data from (Financial Reporting in) Hyperion Planning & Budgeting into Excel Using ODI?
    Would the steps be the same as Creating an ODI Project and Interface: Exporting a Flat File to a Flat File? If not, why?
    Best Regards.
    Edited by: Saturday on May 26, 2012 9:55 PM

    Where do you think the financial reports get their data from? Financial Reports pull data from data sources such as Essbase, HFM.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Hyperion Planning customization on getting data from RDBMS posting to form

    Hi, gurus,
    I am having requirement to retrieve some data from RDBMS and put it on a particular form at Hyperion Planning. We had customized a bit on the same form with modifying its jsp file by adding in some access control upon various user login and add graphic icon. Could anyone share some light on this POC and my understanding is the data will go through ODI and pass to a temporary table and then update to the Essbase table, please comment and point me to the reference on Hyperion planning customization.
    Thanks,
    Fei

    Hi,
    You shouldn't need to go down the route of customizing planning, I would say only go down that route if all the options are not feasible.
    In theory you should be able to use ODI to retrieve and transform the data from a relational table, then load it directly into essbase.
    The planning form will query the data in essbase and present the data in the grid.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Need information of Hyperion Data Integration Management

    Hi,
    It would be great if someone could provide links to documentation about the Hyperion Data integration Management tool.
    I have tried to look for downloads, but in vain.
    Thanks,

    Hello,
    You can find the product documentation at:
    http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_6.htm
    And the install documentation at:
    http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_1.htm

  • What is hyperion data integration management(DIM)

    hi
    i listem that there is some integration between hyperion and informatica called DIM(data integration management).
    i want to know more details on that.does any one have pdf or ppts regarding that.
    please forward that to [email protected]
    otherwise tell me what do u know about DIM.where can we use that

    You can find some documentation here.
    http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_6.htm
    DIM is basically Informatica repackaged under the Hyperion label. They were not secretive about this, when the deal was made, before Oracle purchased Hyperion, Hyperion and Informatica entered into an agreement to resell Informatica as part of System 9. It was introduced to replace HAL.
    Now, I haven't heard anything solid on this, but I've noticed since the Oracle acquisition, you really haven't heard anything about DIM. Oracle has a competing product called Oracle Data Integrator, and I've noticed lately that in the literature, they are positioning it as the integration tool, with no mention of DIM.
    Since Oracle Data Integrator does the exact same thing as Informatica, I do not envision DIM being around for very long. I suspect within another release or two it will be replaced with Oracle Data Integrator.
    Just a hunch.

Maybe you are looking for