Data Integration Management (DIM) 9.3.1 server license key is invalid

Hi all,
I am trying to install the Hyperion DIM server 9.3.1 to my Enterprise Redhat Linux 4. I run the setup program without any problem. When I when the configuration utility to configure the DIM, it asks for the connectivity keys. I just grid it from http://licensecodes.oracle.com/hyperion.html. But, it complaints that the license key is invalid.
Does anyone successfully install and configure DIM server in Linux environment? Please help.
nww

Problem sovled after changing LANG=en_US.

Similar Messages

  • What is hyperion data integration management(DIM)

    hi
    i listem that there is some integration between hyperion and informatica called DIM(data integration management).
    i want to know more details on that.does any one have pdf or ppts regarding that.
    please forward that to [email protected]
    otherwise tell me what do u know about DIM.where can we use that

    You can find some documentation here.
    http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_6.htm
    DIM is basically Informatica repackaged under the Hyperion label. They were not secretive about this, when the deal was made, before Oracle purchased Hyperion, Hyperion and Informatica entered into an agreement to resell Informatica as part of System 9. It was introduced to replace HAL.
    Now, I haven't heard anything solid on this, but I've noticed since the Oracle acquisition, you really haven't heard anything about DIM. Oracle has a competing product called Oracle Data Integrator, and I've noticed lately that in the literature, they are positioning it as the integration tool, with no mention of DIM.
    Since Oracle Data Integrator does the exact same thing as Informatica, I do not envision DIM being around for very long. I suspect within another release or two it will be replaced with Oracle Data Integrator.
    Just a hunch.

  • Data Integrity Manager & Synchronize Objects

    Hi there,
    I have 2 questions regading data integrity and synchronization. If any of you can help me out, I would really appreciate it.
    1) Synchronize Objects (R3AS4): Is this only used to sync the customizing objects or can it be used to sync master data objects as well? When I run this transaction, I get the message tat "Synchronization Ware not activated". Do any of you know how to activate this?
    2) Data Integrity Manager: How do I choose betweeen a header level comparison and detail comparison. When I try to run it , nothing seems to happen, and I just get the message "0 objects are equal" and "0 objects are not equal" when I run it. I am just using the DIMA wizard to start the comparison. Do any of you have the "Data Integrity Manager Cookbook"? If so, can you please send ot to me?
    Thanks in advance
    Max

    Hello Max,
    Here are the steps that I just did in my system:
    - transaction SDIMA
    - New DIMa Instance wizard
    - name = customer / object = customer
    - RFC destination = <R/3> / filter mode = All filter / flag to start compare on wizard completion
    - no filter settings
    - complete
    So the compare start as soon as the wizard is finished.
    You can see the status of the job in the right of the screen. (it takes some time for BP). When the status is green, the job is finished.
    Maybe you will have the message "0 objects are equal, 0 objects are not equal" but you should also have just above a message like "421 object(s) exist in both systems".
    I don't think that the fact that you are not sending BP back to R/3 is a problem to use DIMA.
    Hope this will help you.
    Regards,
    Frédéric

  • Need information of Hyperion Data Integration Management

    Hi,
    It would be great if someone could provide links to documentation about the Hyperion Data integration Management tool.
    I have tried to look for downloads, but in vain.
    Thanks,

    Hello,
    You can find the product documentation at:
    http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_6.htm
    And the install documentation at:
    http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_1.htm

  • Leopard Server License Key suddenly becomes invalid after update to 10.5.8

    After doing the update to 10.5.8, when I go into Server Admin, it says my License Key is a duplicate and locks me out of all services and only allows ten clients to connect. I tried switching the license to another, and the same thing happens. And both keys work perfectly fine on a different server. Any suggestions as to what may be going on?

    Here is a copy of what keeps appearing in the Server Admin log file if that helps at all:
    Aug 11 12:17:02 spub /usr/sbin/serialnumberd[146]: MulticastListener(): conflicting serial number from 129.130.29.128
    Aug 11 12:17:06 spub servermgrd[55]: servermgr_info: [55] SNCheck() failed with 1 (spub.ksu.edu: )
    Aug 11 12:17:06 spub [0x0-0x36036].com.apple.ServerAdmin[5939]: * ERROR: -[GRAxes computeLayout]:1124 - plotRect height = 0.000000 <= 0.0 *
    Aug 11 12:17:06 spub [0x0-0x36036].com.apple.ServerAdmin[5939]: * ERROR: -[GRChartView computeLayout]:1194 - Layout for overlay axes (0xab1c290) failed. *
    Aug 11 12:17:06 spub [0x0-0x36036].com.apple.ServerAdmin[5939]: * ERROR: -[GRAxes computeLayout]:1124 - plotRect height = 0.000000 <= 0.0 *
    Aug 11 12:17:06 spub [0x0-0x36036].com.apple.ServerAdmin[5939]: * ERROR: -[GRChartView computeLayout]:1194 - Layout for overlay axes (0xab2b6a0) failed. *
    Aug 11 12:17:34 spub postfix/smtpd[5641]: warning: 125.160.151.41: hostname 41.subnet125-160-151.speedy.telkom.net.id verification failed: nodename nor servname provided, or not known
    Aug 11 12:17:51 spub postfix/smtpd[5641]: warning: 189.135.192.35: hostname dsl-189-135-192-35-dyn.prod-infinitum.com.mx verification failed: nodename nor servname provided, or not known
    Aug 11 12:18:02 spub /usr/sbin/serialnumberd[146]: Conflict found for tag xsvr: local (pid = 55, extra= ); remote (host = spub.ksu.edu, extra = )
    Aug 11 12:18:02 spub /usr/sbin/serialnumberd[146]: MulticastListener(): conflicting serial number from 129.130.29.128
    Aug 11 12:19:00 spub postfix/smtpd[6166]: warning: 189.169.250.244: hostname dsl-189-169-250-244-dyn.prod-infinitum.com.mx verification failed: nodename nor servname provided, or not known
    Aug 11 12:19:00 spub imap[6167]: TLS server engine: cannot load CA data
    Aug 11 12:19:00 spub imap[6167]: TLS server engine: No CA file specified. Client side certs may not work
    Aug 11 12:19:00 spub imap[6167]: STARTTLS negotiation failed: 213.spub.ksu.edu [129.130.29.213]
    Aug 11 12:19:02: --- last message repeated 3 times ---
    Aug 11 12:19:02 spub /usr/sbin/serialnumberd[146]: Conflict found for tag xsvr: local (pid = 55, extra= ); remote (host = spub.ksu.edu, extra = )
    Aug 11 12:19:02 spub /usr/sbin/serialnumberd[146]: MulticastListener(): conflicting serial number from 129.130.29.128

  • Windows 2008 Server License Key not working on VirtualBox

    I have a validated licensed copy of Windows 2008 Server and I need to load it on a Virtual machine (I am running Oracle VirtualBox). When I had the server running on a hardware based server it worked fine. The license key activated and it worked. Now when
    I load it onto the VirtualBox solution it fails. It will take it when I run the manual command but will not show my server as activated. This is for my private use only (internal home LAN) but I would prefer to have the activation be correct since I use this
    setup to help keep fresh on Windows 2008 servers while being on a Linux OS with a VM software loaded.  What can I do to have this server activate correctly under the VirtualBox?
    Thanks,
    Tom

    Hi Tom,
    Base on my experience, after we convert a physical computer system to virtualize environment we need to reactive it, with MAK active method we need keep this vm to connect to
    internet and with KMS method please confirm this vm can communicate with your KMS server.
    The related KB:
    Understanding MAK Activation
    https://technet.microsoft.com/en-us/library/ff793435.aspx
    Volume Activation in Disconnected Environments
    https://technet.microsoft.com/en-us/library/dd981010.aspx
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • SMP 3.0 with WM 6.2 Server license Key

    Hello All , Older version of syclo agentry , we need to configured sever license (No of User License Key) . But , can we do same thing in SMP 3.0 Server ? Because i could not find any server key things in WM 6.2 Agentry files . can you provide some suggestion here ? Thanks & Regards,   Kunal Varaiya

    Hi Kunal, Please check more information about licensing in below official help guide.
    SAP License Auditing

  • Tiger Server license key mismatch

    I'm re-installing my OS X Tiger 10.4 server, only to be faced with a prompt for the license key. I entered as according to my "software serial number" sticker - but bizarrely the system requires the fourth field (single character) to be a letter - whereas on my sticker it is most definitely a number (zero).
    Why the discrepancy here? Is this a known problem? How does one get around it?

    Sometimes it is a letter sometimes a number. It depends on what was entered ahead of it.
    Whenever I get a rejected / invalid serial number notice it is usually due to me "fat fingering" something earlier in line.
    You know, "i"s that look like "l"s and "1"s.
    Seems to happen more often the older I get.

  • Actuate Server License Key

    Hi,
    Did any one know from where can i get a Actuate Server 7 license key ?
    Thanks,
    Asif

    You can find more information on Supportweb:
    Actuate License Keys Required for the Installation of the Siebel Reports Server for Siebel Business Applications Versions 7.5.x and Higher [ID 476821.1]

  • Data integrator and informatic

    Hi There
    does any one know the difference between informatic and data integartor? if someone has informatic skill, could it be easy to transfer to data integrator?
    thanks

    First of all, Data Integrator is not a reporting tool, it is an ETL tool from SAP BO.
    1) When we go for Data Integrator and Rapid marts
    2) What is the importance of Data Integrator
    3) Can you give a scenario for Data Integrator and Rapid marts..
    Rapid Mart is a pre-built information component, that use DI as an ETL tool which extracts data
    from different source systems like SAP, Peoplesoft, Oracle, Siebel & JD Edwards, integrating and
    loading into datamarts.
    The analytic datamarts(pre defined data warehouse application) focused on different subject areas..
    such as Sales, HR, Inventory, Accounts etc..
    4) what are the basics required to know Data Integrator
    Data Warehouse and ETL concepts.
    5) What is the land scape of Data Integrator
    6) What are Advatages and Dis advantages of Data Integrator.
    Data Integrator allows to develop data warehouse applications in both Batch and Real-Time job mode
    Data Integrator manages the data from heterogeneous and homogeneous sources and transforms the data
    according to business logic, integrates into single data source for analysis.
    It extracts the data from operational source systems and external source systems typically like RDBMS,
    Flat files, XML files, XML Messages, SAP IDocu2019s, PeopleSoft, Siebel etc
    7) What are Advantages of Rapid marts
    RM can customize easily and Immediate ROI

  • Data Integrator and Rapid marts

    Hello Friends,
    i am new to Data Integrator and Rapid marts.  as per muy knowledge Data Integrator is a reporting tool.
    i have few questions.. plz give me the solutions..
    1) When we go for Data Integrator and Rapid marts
    2) What is the importance of Data Integrator
    3) Can you give a scenario for Data Integrator and Rapid marts..
    4) what are the basics required to know Data Integrator
    5) What is the land scape of Data Integrator
    6) What are Advatages and Dis advantages of Data Integrator reproting.
    7) What are Advantages of Rapid marts
    Plz dont give links...
    Regards

    First of all, Data Integrator is not a reporting tool, it is an ETL tool from SAP BO.
    1) When we go for Data Integrator and Rapid marts
    2) What is the importance of Data Integrator
    3) Can you give a scenario for Data Integrator and Rapid marts..
    Rapid Mart is a pre-built information component, that use DI as an ETL tool which extracts data
    from different source systems like SAP, Peoplesoft, Oracle, Siebel & JD Edwards, integrating and
    loading into datamarts.
    The analytic datamarts(pre defined data warehouse application) focused on different subject areas..
    such as Sales, HR, Inventory, Accounts etc..
    4) what are the basics required to know Data Integrator
    Data Warehouse and ETL concepts.
    5) What is the land scape of Data Integrator
    6) What are Advatages and Dis advantages of Data Integrator.
    Data Integrator allows to develop data warehouse applications in both Batch and Real-Time job mode
    Data Integrator manages the data from heterogeneous and homogeneous sources and transforms the data
    according to business logic, integrates into single data source for analysis.
    It extracts the data from operational source systems and external source systems typically like RDBMS,
    Flat files, XML files, XML Messages, SAP IDocu2019s, PeopleSoft, Siebel etc
    7) What are Advantages of Rapid marts
    RM can customize easily and Immediate ROI

  • Solution manager license key generation

    Hi All,
    I have one solution manager server with AS ABAP and AS JAVA.But the license is expired for the J2ee engine.
    I want to generate the license key for that, but the issue is the solution manager installation is not registered in the service market place, so how i will generate the license key?
    In the process of license generation, I need to select the system for which i want to generate a permanet license.But the system is not available at the service market place.
    To generate the license key the installation and the SYSTEMSID should be available at the service market place which is ususally done by a solution manager but how to do all these for a solution manager.
    Manisha Das

    To get a license key for your Solution Manager system just go to:
    https://websmp201.sap-ag.de/licensekey
    Select the appropriate installation number and create a new system (your solman SID). After that you are able to request a valid license for your installation.
    A separate J2EE license is not necessary for a Java AddIn/Double Stack Installation.
    /cheers

  • Rename a Data Integrator server after initial installation

    Is it possible to rename the Data Integrator server after initial installation?

    The easiest thing to do is running the server manager before the migration and remove the repository assoziation or the entire jobserver. Same with the management console.
    Then move the server.
    And recreate the jobserver and webadmin entry.
    In case it is too late for the first step, simply truncate AL_MACHINE_INFO table deleting all jobserver/webadmin links and then resync those.

  • Data Integrator Web administrator  & Login Failed in Profiler server login

    Post Author: mohideen_km
    CA Forum: Data Integration
    Hi guys
    Help me
    Login Failed in Profiler server login
    I Create Profiler Repository in Repository manager
    While I login in BO DI Designer
    I am getting an error
    While login in Profiler Server Login
    Connection to the Profiler   Error is :  server failed
    close the application saving the login 
    Web administrator Problem
    I have some doubts.Business objects Data Integrator.
    error is : I can't View the Batch jobs history for the repository
    Procedure I followed
    In data Integrator Web administrator
    --while logging as Admin
    --In management Tree left frame of browser
    --Click Status Interval -- Select > Show last Execution of job -- Click
    apply --> Click Home
    after Clicking home --- Click the repository ( I created direpo) i.e
    Batch
    After that I can't view anything any job name.......
    Help me to figure it out
    Mohideen
    Prediktiva Technologies

    Post Author: bhofmans
    CA Forum: Data Integration
    Hi,
    For the profiler problem : you need to add the profiler repository to the web admin too (you can do this in the tree Management/Repositories). Next you need a webadmin user that is linked to this repo, you could use the admin user for that, just check in Management/Users that for this user the profiler repo is attached.
    Once this is set up in the management console, from within the designer, you can connect to the Profiling services using the web administrator's server name and port (e.g. localhost:28080) and the web admin user and password (e.g. admin/admin).
    For your second problem : please check the connection to the repo (I assume you added the direpo already to the web admin) . Again in the tree Management/Repositories go to the local repository connection you created and check the connection (there is a test button). If the connection is correct, you will see the job history (empty if there are no job executions), in the configuration page you will see a list of all jobs and can execute or schedule a job.
    Hope this helps...

  • Data Integrator Job Server - How to Enable

    Post Author: Janet Gilmore
    CA Forum: Administration
    The Job Server associated connected with our Data Integrator in not enabled. We have stopped and started the job server and get no errors, but when we look at the Data Integrator Server Manager, the Enabled column says NO.  Any suggestions as to how to get the Job Server Enabled?
    >> Update:  This turned out to be a license key problem.  We had downloaded a license that was for a different version that the Job Server that was installed.  We got a new license key and downloaded it and everything worked!

    to be able to install the Data Integrator Job Server correctly
    its all about the license of the product
    im sure you have License Authorization Code
    go to this link
    a) Go to http://webkey.businessobjects.com on the Internet.
    b) Copy the Authorization Code and paste it into the License
    c) Click the 'SUBMIT' button.
    d) Save each license file in with a *.lic extension
    im sure if you follow the instructions you will be able to install the software correctly

Maybe you are looking for