Data integration navigate - how to set view type to chart??

Hi,
I have an answers report embedded in a dashboard.
I have a value which I have set interfaction / navigate to an answers report which is NOT on a DASHBOARD.
Is there anyway to get the viewtype to default to CHART (or any other non table / non compound view) without embedding the report in question in a dashboard page - which I have done previously as a workaround (hiding the page).
I do not wish to use GO_URL.
I am on version 10.1.3.4
thanks,
Robert.

Sorry - not sure I understand your question?!
If you mean how many times do I want to use this, then once I have cracked the syntax it would be an option that I would use regularly, my preference not to use GO_URL is the problem it causes with priinting - the URL content is visible in pdf's even when wrapped up in html - and with the length of the field with go_url syntax that is ugly....
And yes, I know there is a workaround for the printing, but every workaround undermines the effectiveness of the tool...
regards,
Robert.

Similar Messages

How to set field type choice using csom (c#)

I have a field type: Choice (menu to choose from) which is not multichoice. How do I set a value?
I have found code for multiple choice but it doesn't seem to work for single choice.

Hi,
The following code snippet for your reference:
newListItem["ChoiceFieldName"] = "ChoiceValue";
newListItem.Update();
clientContext.Load(newListItem);
clientContext.ExecuteQuery();
If you are assigning a Value which is not in the Choice Column, You need to create a choice value then assign it to the item.
More information is here:
http://sharepoint.stackexchange.com/questions/124999/how-to-set-field-type-choice-using-csom-c
Best Regards
Dennis Guo
TechNet Community Support

I download itext for convert jsp to PDF. How to set content type for PDF.

I download itext for convert jsp to PDF. How to set content type for PDF. I try
<%@ page contentType = "application/pdf;charset=TIS-620" %>
, but the page does not PDF.
Thank.

PDF files are usually binary files, JSPs are not well-suited for binary content.
(If you download the result of your JSP you'll see that it is not a valid PDF file; it will have probably a lot of whitespace and linefeeds, that will choke your PDF reader.). The first few characters must be
"%PDF-" without whitespace.
You can try using PDF files encoded as text - check if you can use text-encoded PDFs in iText.
Try using a Servlet instead.

How to set legend of strip chart in CVI8.0

Do somebody know how to set legend of strip chart in CVI8.0? I know that in CVI8.5 SettraceAttributeEx() can used to set legend of strip chart, but in CVI8.0, there is no the function. Thank you very much.

Hi Ravi,
If I am not wrong You are referring to article Queues for Prioritized Message. But this is about how to Prioritize message inside XI.
What I am intresetd in is to set a message priority (for example "2")for the message going to MQ. That is when the message reached the detination queue the priority of this message should be 2 in the queue.
Thanks
Abinash

How Data Integrator supports multiple character sets in a single ETL transaction

When using Data Integrator (DI) to process a mix of multi-byte and single-byte data, it is recommended that you use UTF-8 for the job server codepage. You can, however, use different codepages for the individual datastores.Imagine this situation : Great Big Company Inc. wants to create a global customer database. To do this, Great Big Company Inc. must read from a database of US customers, and a database of Korean customers. Great Big Company Inc. then wants to load both sets of customers into a single database.Can DI manage these requirements? Of course. The codepage is the thing.

I've never seen this used the way you are using it. In my experience the only way to do this would be to execute a single SQL statement that returns multiple result sets - you are trying to append two SQL statements.
You could define an in-line procedure wrapping your two select statements, or you could define a stored procedure to do the same thing. Then (either way) use CallableStatement to execute the call to the procedure.

How to set task type of a task in MS Project using excel vba code.

Hello Gurus,
I am generating MS Project files(.mpp) files form excel data. An excel macro in the excel file will read the excel data and will generate the .mpp file. It is working fine. now i want to set the task type of all the tasks to "Fixed work" from excel
vba code.
How to use the property PjTaskFixedType in setting the task type??
refer below links
http://msdn.microsoft.com/en-us/library/office/ff861713.aspx
http://msdn.microsoft.com/en-us/library/office/ff864157.aspx
Can someone help me in setting task type property from excel vba.
I have attached my sample code used to generate the mpp file. It is not the complete code but you will get an idea from it.
Set pjApp = CreateObject("MSProject.Application")
pjApp.FileNew
Set newproj = pjApp.ActiveProject
newproj.Tasks.Add (task_name)
newproj.Tasks(mpp_row_number).Start = task_start_date
newproj.Tasks(mpp_row_number).Finish = task_end_date
newproj.Tasks(mpp_row_number).ResourceNames = resource_name
pjApp.FileSaveAs mpp_file_save_path & mpp_file_name & ".mpp"
pjApp.FileClose
pjApp.Quit
Any help is appreciated.

Hi Syamku,
A simple example that sets the task type:
ActiveProject.Tasks(2).Type = pjFixedDuration
ActiveProject.Tasks(3).Type = pjFixedUnits
ActiveProject.Tasks(4).Type = pjFixedWork
http://msdn.microsoft.com/en-us/library/office/ff860469(v=office.15).aspx
Hope this helps

How to set View for Completed items inside Tasks?

How to set button for 'View' and see Completed items or not completed inside Tasks?

Hi,
You want to set custom views for Tasks folder so that when we click a view button, it will show all Completed or incomplete tasks, am I correct?
Which version of Outlook are you using? There are existing views for completed/incomplete tasks in Outlook. In Outlook 2010 and Outlook 2013, we can find the buttons under View tab > Change View. Click Completed button to view all completed
tasks; Click Active button to view incomplete tasks.
In Outlook 2007, just click View > Current View to switch between different views.
If I've misunderstood something, please feel free to let me know.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to set Screen type "Selection Screen" in Dialog program

Hi Experts,
I have copied a screen 400 from a program into my program. In that screen in source program, the screen type was defined as 'Selection Screen'. After i copied that screen into my program, the screen type Selection Screen option is disabled. How to set the screen type of a screen to Selection Screen.
I am currently getting the following error
"Error when generating the selection screen "0400" of "Ztest_screen ".
I tried running the generation program RSDBGENA. There the diagnosis was given as follows:
When generating the report Ztest_screen and its selection screen, an existing screen 1000 (not a selection screen) was overwritten.
The selection screen was defined as follows:
SELECTION-SCREEN BEGIN OF SCREEN 400 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK blck1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_matnr FOR mara-matnr.
PARAMETERS: p_werks TYPE werks_d OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blck1.
SELECTION-SCREEN END OF SCREEN 400 .
I am calling the screen 400 with selection screen declarations in PBO of screen 0100.
CALL SUBSCREEN sub_scr INCLUDING 'Ztest_Screen' '400'.
Where am i going wrong? Your inputs are needed.
Thanks

Thanks Przemysław and Nabheet for your suggestions.
I had copied the generated screen 400 also from the source program into my program. This was the error. I deleted that and the report got activated now.
Both the source and destination programs are not module pool. They are executable programs.
Thanks

How to set content-type for outbound mail in BCS

Hey everybody,
can anybody please give me a hint how to set the content-type for outbound email in ABAP using BCS to send mail.
By default the content tyoe is set to text/html. I need other.
Best regards
Roman

//add related mutip-part to combine parts
MimeMultipart multipart = new MimeMultipart("related");
//attach a pdf
messageBodyPart = new MimeBodyPart();
fds = new FileDataSource("h:/something.pdf");
messageBodyPart.setDataHandler(new DataHandler(fds));
messageBodyPart.setFileName(fds.getName());
multipart.addBodyPart(messageBodyPart);
//add multipart to the message
message.setContent(multipart);
//send message
Transport.send(message);

How to set container type in PHP

Hello, I wanna to set the type of container to be XmlContainer::WholedocContainer. However it did not work, the php warnning "Fatal error: Undefined class constant 'WholedocContainer'". The book named The Definitive Guide to Berkeley DB XML told that the delimiter in php was replaced by underscore. But this guide leads php completely fall. How could I do to correctly set up the parameter? Thanks
Edited by: user10993398 on Dec 14, 2009 5:36 PM

Hi,
Here is an example for dbxml-2.5.13:
<?
function initDbXmlSystem()
 global $_REQUEST;
 $envName = "./tmp";
 $contName = "result.dbxml";
 $env = new Db4Env();
 $env->open($envName);
 $mgr = new XmlManager($env, DBXML_ALLOW_EXTERNAL_ACCESS);
 $config = new XmlContainerConfig();
 $config->setTransactional(true);
 $config->setContainerType(XmlContainer_WholedocContainer);
 $mgr->setDefaultContainerConfig($config);
 $cont = $mgr->createContainer($contName);
initDbXmlSystem();
echo "DONE";
?>

How to set MIME type for JNLP in Windows2000 IIS

Hi!
I try to set up my windows 2000 IIS's MIME type for JNLP to test java web start, but I have no idea how to set
the MIME type. Can anybody help me???
Best wishes

In IIS v4 which comes with the Windows NT4 option pack, you right click the web page you are working with, select properties, then go to the HTTP Headers tab. At the bottom there's a button labelled File Types in the MIME Map section.
After you've clicked that, you can add the two mime types you need;
Associated Extension MIME Type
.jar application/x-java-jar-file
.jnlp application/x-java-jnlp-file
I'm assuming that it is the same in W2k/IIS5.

How to set security type for lenovo working with hotspot?

How to set wireless security type for lenovo laptop working with hotspot?
Since I can connect with the other laptops except this brand.

//add related mutip-part to combine parts
MimeMultipart multipart = new MimeMultipart("related");
//attach a pdf
messageBodyPart = new MimeBodyPart();
fds = new FileDataSource("h:/something.pdf");
messageBodyPart.setDataHandler(new DataHandler(fds));
messageBodyPart.setFileName(fds.getName());
multipart.addBodyPart(messageBodyPart);
//add multipart to the message
message.setContent(multipart);
//send message
Transport.send(message);

How does set metric-type internal (bgp) work?

i can't realise how the command "set metric-type internal " to work.
bgp announce to ebgp use the igp next-hop metric as the med.
the igp means only isis?
does ospf use it ?
will you tell me how to use it ? give me an example . thinks

Hi,
This command can be used into two different contexts:
1- Redistribution into ISIS
When you are redistributing routes into ISIS, you have the choice to set the metric-type as internal (between 0 and 64) or external (between 65 and 128)
Internal metric are always prefer over external metric
2- Set the MED to reflect IGP cost to the NH on eBGP updates
You are receiving an iBGP update and before sending it to your eBGP peers, you want the MED for that prefix set to your IGP cost to the iBGP peer announcing this prefix.
In this case the IGP can be anything.
This command is not necessary if you are redistributing the route into BGP directly instead of receiving them from iBGP. In such case, the MED reflects by default the IGP cost of the redistributed prefix.
HTH
Laurent.

ALV Graphs: How to set line type graph as default graph

Hi All,
I need to develop a line graph. The fields on the X-axis will change dynamically. Some times they may be 10 field and some times they may be more than 100 fields. I tried with Function Module GFW_PRES_SHOW_MULT. But I can only display maximum 32 fields. Can anyone tell me exact program which helps me to full fill my requirement. It will be a great help if you could told how do display line type graph as default graph in ALV. In REUSE_ALV_GRID_DISPLAY there is a Exporting parameter MT_CHART_TYPES but this help you only to enter description for X-axis and Y-axis.
Many thanks in advance.

I would call GRAPH_MATRIX_2D with options depending on representation you wish
look at the program GRBUSG_1 to see how to use it
there you have some options to display bar chart, but you could use other values (complete list of options is available in documentation of function module GRAPH_MATRIX_2D - click on parameter OPTS in help display to see full explanation)
exemple:
P2TYPE = LN to display lines

How to set content type while sending an email?

Hello,
I want to set content type text/html while send an email using org.apache.commons.httpclient api. I am using MultipartPostMethod method. and i am set using object of multipartpostmethod like post.
and post.setRequestHeader("Content-Type","text/html").
but it wont work.
so please give me a proper solution.
example::
MultipartPostMethod post = new MultipartPostMethod("url");
post.addParameter("msgbody","html message");
post.setRequestHeader("Content-Type","text/html");
Regards,
Bhavesh Kharwa

Actually, I'm writing a "HashMap" from servlet to applet. I have used your suggested content type "application/octet-stream" and another "appication/x-java-serialized-object" to try it. But in applet side, when I use (HashMap)in.readObject(), it always gives me a exception as:"java.util.HashMap; IllegalAccessException". Why?
Thankd.

Data integration navigate - how to set view type to chart??

Similar Messages

Maybe you are looking for