Data Integrator and BMC Control-M scheduler

Hi,
anyone have experience, indications or suggestions on if and how the Data Integrator jobs can be scheduled from Control-M scheduler using the SNMP protocol adapter?
Thanks,
Renato
Edited by: Renato Nardelli on Sep 22, 2009 3:58 PM

I dont think you require ECC system upgrade only for Control M. This product is even compatible with R/3 versions.
As per suggestion from Joe, please raise a call with BMC support team to check software version and SAP compatibiliy.
[http://www.bmc.com/support]
Best Regards,
Edited by: Rupali B on Mar 8, 2012 6:35 PM

Similar Messages

Data Integrator and Data Quality

Hi,
I worked on BI 7.0 and now exploring Business objects. I wanted to know how Data Integrator and Data Quality products relate to SAP BI 7. What is the purpose of using them. Is this integration and quality features not embedded in SAP BI 7.

BI and Data Services share many integration features, but Data Service provides better connectivity to third party data sources. The data quality features of Data Services are not available in BI.

SAP TechEd 2011- Data Integration and Quality Managment Sessions

Looking for answers on "Data Integration and Quality Management," check out the related educational sessions at SAP TechEd 2011 ([Las Vegas|http://bit.ly/qE0dZs], [Bangalore|http://bit.ly/oVdGsM], [Madrid|http://bit.ly/rnSNOT]). [Register today|http://www.sdn.sap.com/irj/scn/sapteched]!

Hi,
you must check in sap teched site and register it, the link as below
[SAP Teched Banglore 2011|http://www2.sapevents.com/SAP/TechEd2011Bangalore/index.cfm?fuseaction=agenda.sessionCatalogueHOS&view=overview]
Thanks,
Jansi

Data Integrator and Data Services

What is the recommendations in Installing DQ with DI on the same box?
The documentation does not have a checklist on installing DQ and DI anywhere.
1.) Can DI and Data Services run on the same server? If they can run on the same server whatu2019s the specs of the server?
2.) Can Data Services take advantage of more then 4 gigs of memory?
Edited by: Peter Lo on Sep 23, 2008 6:34 PM

Hi there,
There used to be Data Integrator and Data Quality.
However it has merged together under one platform, Data Services.
That means Data Services includes Data Integration and Data Quality together as one product.
So Data Integrator would still be around but it will fall under Data Services.

Data integrator and informatic

Hi There
does any one know the difference between informatic and data integartor? if someone has informatic skill, could it be easy to transfer to data integrator?
thanks

First of all, Data Integrator is not a reporting tool, it is an ETL tool from SAP BO.
1) When we go for Data Integrator and Rapid marts
2) What is the importance of Data Integrator
3) Can you give a scenario for Data Integrator and Rapid marts..
Rapid Mart is a pre-built information component, that use DI as an ETL tool which extracts data
from different source systems like SAP, Peoplesoft, Oracle, Siebel & JD Edwards, integrating and
loading into datamarts.
The analytic datamarts(pre defined data warehouse application) focused on different subject areas..
such as Sales, HR, Inventory, Accounts etc..
4) what are the basics required to know Data Integrator
Data Warehouse and ETL concepts.
5) What is the land scape of Data Integrator
6) What are Advatages and Dis advantages of Data Integrator.
Data Integrator allows to develop data warehouse applications in both Batch and Real-Time job mode
Data Integrator manages the data from heterogeneous and homogeneous sources and transforms the data
according to business logic, integrates into single data source for analysis.
It extracts the data from operational source systems and external source systems typically like RDBMS,
Flat files, XML files, XML Messages, SAP IDocu2019s, PeopleSoft, Siebel etc
7) What are Advantages of Rapid marts
RM can customize easily and Immediate ROI

Data Integrator and Rapid marts

Hello Friends,
i am new to Data Integrator and Rapid marts. as per muy knowledge Data Integrator is a reporting tool.
i have few questions.. plz give me the solutions..
1) When we go for Data Integrator and Rapid marts
2) What is the importance of Data Integrator
3) Can you give a scenario for Data Integrator and Rapid marts..
4) what are the basics required to know Data Integrator
5) What is the land scape of Data Integrator
6) What are Advatages and Dis advantages of Data Integrator reproting.
7) What are Advantages of Rapid marts
Plz dont give links...
Regards

First of all, Data Integrator is not a reporting tool, it is an ETL tool from SAP BO.
1) When we go for Data Integrator and Rapid marts
2) What is the importance of Data Integrator
3) Can you give a scenario for Data Integrator and Rapid marts..
Rapid Mart is a pre-built information component, that use DI as an ETL tool which extracts data
from different source systems like SAP, Peoplesoft, Oracle, Siebel & JD Edwards, integrating and
loading into datamarts.
The analytic datamarts(pre defined data warehouse application) focused on different subject areas..
such as Sales, HR, Inventory, Accounts etc..
4) what are the basics required to know Data Integrator
Data Warehouse and ETL concepts.
5) What is the land scape of Data Integrator
6) What are Advatages and Dis advantages of Data Integrator.
Data Integrator allows to develop data warehouse applications in both Batch and Real-Time job mode
Data Integrator manages the data from heterogeneous and homogeneous sources and transforms the data
according to business logic, integrates into single data source for analysis.
It extracts the data from operational source systems and external source systems typically like RDBMS,
Flat files, XML files, XML Messages, SAP IDocu2019s, PeopleSoft, Siebel etc
7) What are Advantages of Rapid marts
RM can customize easily and Immediate ROI

Org data determination and copy control

Experts,
I have a scenario where service orders are created automatically form a service contract. The same service order can also be created manually.
Org determination in service contract is based on the Sold-to-party.
Org determination in service order is based on the ship-to- party.
When service order are manually created - org data is determined based on ship-to-party -
But when automatically created form Service contract the Org data is copied from Service contract.
Or how can I redetermine the org data in the service order??????????
Thanks and Regards,
Ram

Thanks for the reply guys,
The service order is determining the Org data as expected using the Org data profile and parter function for org values assigned to the the transaction type. This is working as assigned for manually created service orders. This is not the problem.
But when the same service order is automatically created from a Service contract -- Org data is copied form Service contract.
I want it to be determined as it happens when they are created manually.
Any thoughts...
Thank you
Ram

Oracle Data Integrator and API

Hi everybody,
I have to load datas from heterogeneous sources, including some datas which can be retrieved only by calling some API, or which must be parsed before.
I would like to know if ODI is able to call APIs ? and how ?
Thanks in advance for your responses.

Hi everybody,
I can't find any sample which shows the different steps to integrate some third party sources.
I have to integrate Reuters and Bloomberg data sources (and other data sources), and I'd like to write wrappers to retrieve datas from these databases. These wrappers will be called by ODI like any data source. How can I do that ?
If someone has any other idea, please let me know.
Thx in advance.

BI to BPC 7.0 MS version data integration and direct connectivity?

Dear All,
I need some valubale and proper information about the BI to BPC 7.0 (Microsoft)integration?
As i have already gone through forum threads and read blogs stil i dint found any solution to our requrirement.
Is it possible to have a direct data transfer between BI to BPC 7.0(MS version)? I understand that data can be extracted from BI cubes into files and then uplod into BPC. Is there any other ways to bring data directly from BI into BPC 7.0?
Any connectors or plugins has been release in the market so far?
As per our understanding right now in the market for BPC 7.0(NW Version) everything is available but for BPC 7.0 microsoft version if any body as implemented or having any docs or related to that will be great helpful if you can share the same to me.?
IF its not aviailable in the market what could be alternative option to go ahead with the same version?
Thanks a ton in advance.
RK.

Rakesh,
There is nothing delivered within the products that seemlessly integrates data from BI to BPC (MS ver). Besides the aforementioned good ideas about using open hub there are several 3rd Party companies that have an offering that will integrate data from SSIS packages on MS SQL Server from BI. Just search the internet (Xtract IS, iNet-BI, . . .). They all range in price and functionality.
Hope this helps.
Best Regards,
Kevin

Problem with data acquisition and motion control

I have PCI-6024E and PCI-7342 cards on a single PC. Servo motion control works fine when it goes alone or is accompanied by one point data acquisition in a while loop, but when I start data acquisition with specified sample rate, the motor moves with breaks.
Does anybody know what is the problem? Is it possible to fix it?

How are you performing your motion? Is it a position move or a velocity move? How are your triggering the data acquisition? Using breakpoints on the 7342? If so, are you using single breakpoints or modulo? How are you configuring the data acquisition rate? Are you triggering just the start to the acquisition and the unsing the daq scan clock or are you using the motion controller to send the scan clock itself?

Data Logging and Supervisory Control (DSC) Alarm Acknowledge / General Alarm Questions

Hi All -
I would like to know if anyone can help me with DSC and alarms. I have several shared variables that I have setup with alarms and logging with DSC. I can view them with the Shared Variable Manager, the value, status, alarm state, etc. So, I want to be able to view this info on my Front Panel and acknowledge alarms there - - Is that possible? I put "alarm and event display.vi" on my front panel and it shows when a variable goes to alarm state, but I don't see how to acknowledge the alarm once it enters the alarm state.
Other question, once a variable is in an alarm state, obviously it stays there until it is no longer in alarm, but if you acknowledge it - - what happens? does it stay 'red' color and remain in the alarm list - and what about logging, does the log indicate when the alarm was acknowledged any by whom?
So that is my next question, how do I setup and force a user to 'log-on' to be able to acknowledge alarms?
If anyone could point me at a document / tutorial / example I would really appreciate it!
Thanks!
Get Mystified

Mystic wrote:
Hi All -
I would like to know if anyone can help me with DSC and alarms. I have several shared variables that I have setup with alarms and logging with DSC. I can view them with the Shared Variable Manager, the value, status, alarm state, etc. So, I want to be able to view this info on my Front Panel and acknowledge alarms there - - Is that possible? I put "alarm and event display.vi" on my front panel and it shows when a variable goes to alarm state, but I don't see how to acknowledge the alarm once it enters the alarm state.
Other question, once a variable is in an alarm state, obviously it stays there until it is no longer in alarm, but if you acknowledge it - - what happens? does it stay 'red' color and remain in the alarm list - and what about logging, does the log indicate when the alarm was acknowledged any by whom?
So that is my next question, how do I setup and force a user to 'log-on' to be able to acknowledge alarms?
If anyone could point me at a document / tutorial / example I would really appreciate it!
Thanks!
Get Mystified
When your VI is running, you can right-click on the alarm & event display control and it will give you the option of acknowledging the alarm. Another option would be to use the Acknowledge Alarm.vi and create your own interface.
Once the alarm is acknowledged, the alarm color will change to magenta and the acknowledgement information will be displayed.
The acknowledgement information - user, time, comment - will be logged if logging alarms is enabled.
Regards,
Robert

Is there a Business Objects Data Integrator API / SDK to "execute" DI jobs?

Hello,
I am searching for a Business Objects Data Integrator API / SDK that can be used to remotely execute BOBJ DI jobs (like in scheduling BOBJ XI docs).
I found AdapterSDK from BOBJ DI but this is used to create adapters usable with DI (for various sources and targets). I am interested only in executing an already created job...
Thank you in advance,
Adrian Mitrica

You'll probably be better off posting here:
[SAP Community Network Forums » Enterprise Information Management » Data Integration and Quality Management|
I'm just going by the description of the forum but that looks better than this one(?):
This forum is dedicated to topics related to Data Integration (Data Integrator, Data Federator, Text Analysis for Data Integrator, Rapid Marts, and Integration for PeopleSoft Enterprise), Data Quality (Data Quality and Data Insight), and Metadata Management.
I'd move your thread but I do not have the rights to do this move...
Good luck,
- Ludek

How to call text file using Script in Data Integrator

Dear All,
Can any one assit me in how to call a text file using script with the help of Data Integrator.
and one question ?
M having 32 csv files i want to club thos 32 csv files into one table with the help of Data Integrator, can
any one assist me.

mary,
since you knew the file name ,when clicked in name send to server,read the file and write to servlet outputstream.
I think this would help you.
If anything wrong in mycode ..forums will help you further
BufferedInputStream bis=null;
BufferedOutputStream bos=null;
int bytesRead=0;
byte buff[]=new byte[1024];
File f=new File(test.txt);
try{
     bis= new BufferedInputStream(new FileInputStream(f));
     bytesRead=bis.read(buff,0,buff.length);
     if(bytesRead!=-1){
          // create a BufferedOutputStream from ServletOutputStream
          bos=new BufferedInputStream(response.getOutputStream());
          do{
               bos.write(buff,0,bytesRead);
          }while((bytesRead=bis.read(buff,0,buff.length))!=-1)
}catch(Exception e){
     ////error handling
     }

Data Integrator has no read permissions to get the data file using FTP

Hi,
I wonder if you could help.
We have installed the data integrator and are using FTP to get the data file from the SAP server to the DI server. The files are created by the SAP admin user with permissions 660. The FTP user is not in the sapsys group so cannot read the files.
Has anyone come accross this problem and how did you solve it?
Many thanks.

Hi,
you might want to put you entry into the EIM forum where also the Data Integrator topics are being handled:
Data Services and Data Quality
Ingo

Data Integrity Manager & Synchronize Objects

Hi there,
I have 2 questions regading data integrity and synchronization. If any of you can help me out, I would really appreciate it.
1) Synchronize Objects (R3AS4): Is this only used to sync the customizing objects or can it be used to sync master data objects as well? When I run this transaction, I get the message tat "Synchronization Ware not activated". Do any of you know how to activate this?
2) Data Integrity Manager: How do I choose betweeen a header level comparison and detail comparison. When I try to run it , nothing seems to happen, and I just get the message "0 objects are equal" and "0 objects are not equal" when I run it. I am just using the DIMA wizard to start the comparison. Do any of you have the "Data Integrity Manager Cookbook"? If so, can you please send ot to me?
Thanks in advance
Max

Hello Max,
Here are the steps that I just did in my system:
- transaction SDIMA
- New DIMa Instance wizard
- name = customer / object = customer
- RFC destination = <R/3> / filter mode = All filter / flag to start compare on wizard completion
- no filter settings
- complete
So the compare start as soon as the wizard is finished.
You can see the status of the job in the right of the screen. (it takes some time for BP). When the status is green, the job is finished.
Maybe you will have the message "0 objects are equal, 0 objects are not equal" but you should also have just above a message like "421 object(s) exist in both systems".
I don't think that the fact that you are not sending BP back to R/3 is a problem to use DIMA.
Hope this will help you.
Regards,
Frédéric

Data Integrator and BMC Control-M scheduler

Similar Messages

Maybe you are looking for