Data Integrity Issues

Hi All,
We are having an MDM repository in which we are facing issues in uploading new documents into the table.
The fatal error reported is
$$$ Fatal error(1303): The following DataIds apppear in pdc31124585_m000.A2i_Originals_8 but not in pdc31124585_m000.A2i_Data_Ex_8: 1900000000.
I have used the "Verify" and "Repair" options. The "Repair" option rectifies the error, however when we try to upload new document, the issue reoccurs.
Please advise.
Best Regards,
Maya

Hi Maya,
$$$ Fatal error(1303): The following DataIds apppear in pdc31124585_m000.A2i_Originals_8 but not in pdc31124585_m000.A2i_Data_Ex_8: 1900000000.
Please try this thing.
check in data base these two tables and check the DataId that are availble in both anf if you find some ids that available in
pdc31124585_m000.A2i_Originals_8 but not in pdc31124585_m000.A2i_Data_Ex_8: 1900000000 then please delete it from orignals.
Make sure that repository being unloaded when you are doing this.
Please try at yr end and revert back with your results.
Thanks,
Sudhanshu

Similar Messages

Data Integration issue with Adobe form

Hi,
We have been using many xACF forms in our WebDynpro java based application.
For one of the xACF adobe form sometimes I'm not getting the data from adobe form to webdynpro context.
Anyone can pls tell what may be the problem other then binding because that part i have already checked and it's working fine in some of the PC.
Regards
Ravindra Singh

Hi Chintan,
thanks for your reply.
I tried that part already by converting xACF form to ZCI but facing issues with the drop-downs.
Actually some of the dropdowns have values more than 1000. The value help for these drop downs comes as pop up in case of ZCI forms and the mazer problem is that in offline scenario doesn't even shows values for such dropdowns as a pop up or normal drop down.
As per the SAP Note 1013227 we are using the enumerated type of drop downs for such larger values but no help in offline scenario. I tried by changing the parameter value in visual admin as suggested in sap note which prevents pop-up for lager values but it's not recommended by SAP. Only because of this issue we are not able to migrate from xACF to ZCI.
Do you have any idea how to get values for such drop downs in offline scenario.
Thanks & Regards
Ravindra Singh

Data Integrator docs page - display issue?

http://www.oracle.com/technology/products/oracle-data-integrator/10.1.3/htdocs/1013_support.html#docs
The main page 'frame' shows up twice in both IE and FF on my systems.
Anyone else able to confirm this?
Edited by: Hans Forbrich on Sep 13, 2009 11:01 PM

Yes, I'm seeing that also. I've sent mail to the person who (so I'm told) should be able either to fix it or to bring it to the attention of someone who can fix it.

Data integrator designer login issue

Post Author: jeffrey
CA Forum: Data Integration
Why causes this data integrator desisgner login problem ? "LOGON EXCEPTION BODI-1112170: Cannot connect to repository. Please correct and retry."
What is the possible solution for this error.
Thank you.

Post Author: bhofmans
CA Forum: Data Integration
There seems to be something wrong with the connection to your repository.
To test the connectivity you can use the Repository Manager (installed on the same machine as your DI Designer), fill in the repository connection parameters and click 'Get Version'. This will check the connectivity and show you the version of your repository.
Possible causes for this error :
Database middleware not installed on the machine (which database type are you connecting too) ?
Database middleware not configured to connect to your repo (e.g. for Oracle the instance must be defined in tnsnames.ora)

Oracle Data Integrator - Installation Issues

Hi,
I am trying to install ODI 10.1.3.5 on Windows 7 (in Vista compatible mode).
The system check is passed and when the installation starts, I get and error immediately.
The error file has the below contents,
++Exception java.lang.NoSuchFieldError: numFailListEntries occurred..++
++java.lang.NoSuchFieldError: numFailListEntries++
at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.ssntSetPermissionsw32(Native Method)+*
at oracle.sysman.oii.oiix.OiixWinSecurityOps.setPermissions(OiixWinSecurityOps.java:72)+*
at oracle.sysman.oii.oiif.oiifw.OiifwHomeSetupWCCE.doOperation(OiifwHomeSetupWCCE.java:103)+*
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)+*
at oracle.sysman.oii.oiif.oiifw.OiifwInstallPhaseWCCE.doOperation(OiifwInstallPhaseWCCE.java:611)+*
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)+*
at oracle.sysman.oii.oiif.oiifw.OiifwActionsPhaseWCDE.doOperation(OiifwActionsPhaseWCDE.java:607)+*
at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)+*
at oracle.sysman.oii.oiic.OiicInstallSession$OiicSelCompsInstall.doOperation(OiicInstallSession.java:3863)+*
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)+*
at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1278)+*
at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)+*
at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:572)+*
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:962)+*
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:899)+*
I guess it has to do with java installation which comes with ODI.
I have already installed JDK and JRE 1.5 in C:\Java.
Any help in this regard is appreciated.
Thanks in advance,
Abhishek

Hi Abhishek,
I think it's linked to your OS, ODI is not ceritified on Windows 7.
You should try a manual installation without the Oracle Installer, you can refer to the documentation for this (Manual Installation of Oracle Data Integrator).
A manual installation should work if you have a JVM installed in your environment.
Thanks,
Julien

Generic Java for Oracle Data Integrator 10g (10.1.3.5.0)

Hi,
How can I install the Oracle Data Integrator Client in my MacBook. So the generic version should be the right one.
But there are versions for windows, linux, solaris, HPUX and AIX.. but no generic java version.
The version 10.1.3.4.0 has an generic version.
How can I fix this issue, since I tried the linux version but doesn't install.
Thanks.

Hi,
Install the 10.1.3.4 and make an "manual install" after that. It's means copy the oracledi directory over the old oracledi directory.
There is detailed instruction on install manual...
Did you already tried this?
Cezar Santos
[www.odiexperts.com]

"Oracle Data Integrator" with "Total Recall"

Hi all,
We are planning to use Oracle Data Integrator 11g for performing ELT in Oracle 11g database. We are also planning to enable the "total recall" (flashback) technology and house all our tables on it.
Question I have in my mind right now is, will ODI and Total Recall work well together?
Background
Say we have an interface defined with the target data store defined on a tablespace with flashback enabled. Say there are 100 rows in the source, of which 10 rows violated the check constraint . The "bad" data, violating the constraint, will be moved to the E$ table while the rest of the 90 rows are loaded into the target.
Questions*
1) If our business rule dictates zero tolerance for errors and a ROLLBACK is issued, what will happen to the data in the E$ table?
2) Say we have committed* the 90 rows and want to use a flashback transaction query to undo the changes, how will it affect the E$ table?
3) Will the rows be deleted from the E$ table also along with rolling back of the changes in the target?
4) If the errors in E$ are recycled and this interface is restarted after the rollback is performed, will the I$ table contain 110 rows i.e. source data + data from E$?
5) How does ODI handle recycling / reprocessing of the violations in E$ table?
Please advice.
Thank you.
CC

1.) The data in E$ will remain there
2.) The data in E$ will remain there
3.) The data in E$ will remain there
4.) 90 rows. The recycled will still error out
5.) To me the recycling feature is pretty lame. You need to fix the errors in the E$ table and then recycle will load the data.

How to keep data integrity with the two business service in OSB 10.3.1.0

How to keep data integrity with the two business service in OSB 10.3.1.0
In our customer system, customer want to keep data integerity between two businness service. I thinks this is XA transaction issue.
Basing customer requirment, I created a testcase but I can't keep data integerity, For detail information, please refer the attached docs.

Can you please explain what you meant my data integrity in your use case?
Manoj

Text fields being converted to Long in Data Integrator v 11.7

I am a new user to BODI, and I recently experienced an issue with source "TEXT" fields being converted to "LONG" in the Query and Target datastores respectively. I am using Data Integrator v 11.7 and my question is does anyone know whether or not this issue has been resolved in Data Services XI 3..x? if so, can you also provide documentation on this exact issue? Thanks in advance.
Lonnie

Yes, we did some changes in DI 12.0. But what is the problem? A SQL Server TEXT datatype is a text with unlimited length whereas a varchar(maxsize) is limited. In Oracle a CLOB is the same thing. And in DI we call a text of unlimited size a LONG datatype.

How to setup mail client in Data Integrator 11.7 to make use of mail_to()

How to setup mail client in Data Integrator 11.7 to make use of mail_to() function.
I am using mail_to() function in one of my job to know the status of source file. If source file is not ready, our DI job should fail and send mail notification with reason for failure.
But mail_to() function is not sending any mail. I guess I need to set up email client.
Any one please help to resolve this issue.
Thanks
Phani

From the DI documentation that comes with the installation:
To use this function, a mail client must be installed and running on the Job
Server computer that calls the function. The login account for the mail client
must have the same user name and password as the Data Integrator service.
The type of client varies by the operating system:
u2022 If the Job Server is on a computer running the Windows operating
system, then the mail client must comply with MAPI (message application
programming interface). In addition, the mail client must be configured as
the default mail client. For example, Microsoft Outlook is a MAPI-based
mail client.
If the Job Server is on a computer running the UNIX operating system,
then the mail client must be mailx-compliant.
So:
Mail client installed and configured and set as default
Mail client uses the same credentials as the job server service
Or use another function: smtp_to();
If still not working or you are not allowed to use an installed mailclient on your box, then try Blat: http://www.blat.net/

SLO Data Integrity check

Hi,
Currently we have 10 company codes in our production system (e.g. Company Code P01 ~ P10)
However, there is a requirement that 1 (one) of them need to be separated/migrated into separated system (eg. Company code P10)
The idea is to copy client using SLO, then purge the data so the copy client will only contain the data of Company code P10.
Can anybody give me advise on how to test the data integrity efficiently in the copy client after data purging processes?
I am afraid that there will be data corruption exist during the data purging.
Additional information, we have 11 SAP modules involved.
Thanks in advance.
Arif

Hi Arif,
We faced a similar scenario andSLO was used in separating on of our company code's data.
There was no data corruption nor any major issue. However, we designed a testing cycle included all other teams comprising people from all modules to design test cases and scenarios.
From Basis perspective, SLO was done from SAP and post-processing was standard verification done from our side.
Regards,
Divyanshu

How to codepages in Data Integrator

Data Integrator sets the codepage at the job server and the datastore layer. Each job server, which is the Data Integrator "engine" where all of the processing takes place, has a single codepage. In addition, each datastore has its own codepage. The datastore codepage is set via the "locale" of the datastore. Because Data Integrator allows each datastore to have its own codepage, you can build a single job which will read from and/or load into datastores with multiple different codepages.

1st step: create your schema on your database, you can create one schema for both repositories (master and work) or you can create one schema for each repository.
2nd step: execute repcreate.bat
3rd step: run topology and create one or more work repositories.
You can also read the "Installation Guide" let us know if you have any issue.
Regards,

Outlook 2013 is showing verifying Data Integrity

Hi,
When i try to open the outlook 2013,it is not opening and it is showing verifying Data Integrity.
Please let us know how to resolve the issue.
Looking forward for your reply at the earliest
Regards
Pradeep.R

Hi Pradeep,
What type of email account do you use (POP, IMAP, MAPI or Exchange)?
Based on my research, this issue can be caused by the following factors:
Outlook data file (.OST/.PST) corruption issues
Third party add-ins
To troubleshoot this issue, I suggest we first try the following steps:
Try to run Scanpst.exe to repair your Outlook data file and see if it helps. If this is an Exchange account, then you can simply rename the
.ost file to .ost.old or delete it, this will force Outlook to regenerate a new
.ost file and download all the messages from the server again.
Launch Outlook in safe mode and see if issue persists. This will help to determine whether this was caused by any third party add-ins:
Press Win + R and type "outlook.exe /safe" in the blank box, then press
Enter.
Hope this helps.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Data integrator web administrator fails to pull batch job status

We use DB2 v8.1.17.644 with fixpack 17 database for the repository. With fix pack 10 everything worked properly. After the upgrade to fix pack 17 on database server residing on linux operating system and the data integrator server installed on windows 2003 server, it fails. Does anyone have the similar issues or a solution for this problem.
Edited by: Madhu Allani on Oct 17, 2008 7:49 PM

the issue with ALVW_HISTORY failing for DB2 is fixed in DS XI 3.1
for 11.7 you need to modify the view definition, the problem happens if you are using System configuration to run the Job. the view is failing to convert string to number
search for following in your view definition of ALVW_HISTORY
L.OBJECT_KEY = CAST ( SC.VALUE as numeric)
and replace it with the following, it should work fine after that
CAST (L.OBJECT_KEY as char) = SC.VALUE

ODI-1241: Oracle Data Integrator tool execution fails.

Hi
I'm getting the following error while running the OdiOSCommand command. I'm running dos2unix command to convert text files from dos to unix format.
Application tier is on a different host to the ODI setup. Getting the following error. Please help resolve this issue.
Error : ODI-1226: Step OdiOSCommand fails after 1 attempt(s).
ODI-1241: Oracle Data Integrator tool execution fails.
Caused By: com.sunopsis.dwg.function.SnpsFunctionBaseException: ODI-30038: OS command returned 1.

The issue was with the value set for the OUTPUT_DIR variable. It was pointing to the wrong location.
After setting it correctly the package completed successfully.
Thanks for all your replies.
To anwser your question. We are finding junk data and need to run the command to remove them from the input files which are coming from a different source.
Edited by: user761125 on Jun 3, 2012 11:38 PM

Data Integrity Issues

Similar Messages

Maybe you are looking for