Data interfacing from 3rd party system to SAP

Dear all,
We are going to upload employee masters, including actions, org assignment, personal information and other infotypes from a third-party system to SAP HCM.  May I know what should be the best approach, e.g. BDC, BAPIs, for these kinds of data interfacing?  I am thinking to use....
BDC for hiring/transfer/termination actions (besides BDC, any other approaches?)
RH_INSERT_INFTY or RH_UPDATE_INFTY for personal information / other infotypes updates
However, I have no idea on how to automate updates of OM.  Please kindly share your thought, thank you!
Best regards,
Anne

As I known , there is a interface tool named as IDOC.For more information , please ask your abap team.

Similar Messages

  • Recipe data migration from 3rd party system to SAP Recipe Management

    Dear All,
    Can anybody give the steps to be followed to upload Recipe data from a 3rd party system into the
    SAP Recipe Management (RM). I am looking for the logical process to populate the RM tables.
    Thanksa lot  in advance,
    Regards,
    Achyuta

    As I known , there is a interface tool named as IDOC.For more information , please ask your abap team.

  • How to import payroll result from 3rd party system to SAP

    Hi Experts,
    May i know how to import payroll result from legacy system / 3rd party payroll system into SAP.
    i need to import the payroll result from Jan - April (from 3rd party payroll system) and system go live on May. I using payroll malaysia.
    Thanks.

    check this link
    http://help.sap.com/saphelp_40b/helpdata/en/91/80e9087834d111a4620060b03c3b0e/content.htm

  • Migration of Documents from 3rd party software to SAP DMS

    Dear Experts,
    We have implemented SAP DMS . Prior to DMS we were using Third party software for creating and storing the documents.
    There are abot 3000 documents in the third party software, now the challege is how we  must have to migrate the DATA from 3rd party software to SAP DMS with creating Dirs. Are there any upload programmes suffice the requirement or any development needs to be done or any possibilities.
    Kindly help me out in the above scenario.
    Regards
    jayanth

    Hi,
    from DMS point of view I think that SDXA functionality could also be useful for this action. For further information on SXDA functions please see SAP note 817743.
    Best regards,
    Christoph

  • Item master synchronisation from third party system to SAP

    Hello ,
    I would like to understand how we can desgin flow of data in case of changes in Catalog from third party system to SAP.
    We have implemented Catalog functionality.  Catalog maintained in third party system is accessed from SAP for procurement through catalog button.
    Now we want to update SAP contracts when ever there is change in prices in third party system. In this we are also validating currency,UOM, delivery time etc.
    How does we can make this synchronisation? What are the possible solution for this?
    You valuable inputs will be highly appreciable.
    Regards,
    Prashant

    Hi Neetu
    you have to mainatin Item text and not for material PO text...
    Do these settings:
    SPRO->MM->Purchasing->PO->Texts for POs--->Define copying rule for item texts..
    then check you should have a entry for "Item Text" if not then
    Put a Consec no. and against it enter item text. then for this you have to maintain text linkage where u should have source object as Purchase requisition.
    please confirm if these settings are already there?
    regrds
    yogesh

  • Handling load of data in PI - third party systems to SAP R3(Idocs)

    Hi,
    Request your help in addressing the below issue:
    PI (PI 7.0) is receiving a huge load of messages from third party systems at one point of time and it is creating Idocs and dispatching the Idocs to SAP R3 system.
    Since the load that is being received by R3 is more than the work processed available in R3 system, the Idoc processing is being set as a background job which inturn is creating spool requests in R3 system and this is leading to spool overflow issue.
    Is there any possiblity to control the dispatch of Idocs from PI system, say, the Idocs should be queued up in tRFC of PI until the work process in R3 system would be available.
    Please suggest any other possible resolutions to resolve this issue.
    Thank you.
    Regards,
    Subbu

    >>Please suggest any other possible resolutions to resolve this issue.
    Modify idoc occurences and send individual idocs could solve your problem
    Check Michal blog
    /people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
    Idoc packaging suggestion given in this thread
    Re: XI/PI: Receiver IDOC adapter packaging
    Edited by: Baskar Gopal on Mar 25, 2011 12:52 PM

  • Data Extraction from Third party system to BW System issues...

    Hi Experts,
      I would like to know about data extraction issues from third party systems like hyperion or DB2 or Sysbase to BW system, proper procedure to minimise risk facors, etc.
    I hope hear from you soon...
    Thanks in advance....
    Regards,
    Nagendra KReddy

    Hi,
    Below is a document for DB connect. in that frequent problems also mentioned.
    Create DataSource for DB Connect step by step
    -Sriram

  • Querying Data from 3rd Party System

    We would like to query data from a 3rd party (non-SAP) system.  Our BW is an MSSQL DB and the 3rd party is also an MSSQL DB.  We do not want to physically load the data from the external system we just want to use the BW query tools to display the data.
    Is this possible?  I thought this is what a Remote Cube would be used for but SAP's instructions on Remote Cubes are vague and confusing.
           1.      In BW, create a source system for the external system that you want to use.
           2.      Define the required InfoObjects.
           3.      Load the master data:
    ·        Create a master data InfoSource for each characteristic
    ·        Load texts and attributes
           4.      Define the RemoteCube
           5.      Define the queries based on the RemoteCube

    Hi Jon,
    SAP RemoteCube is an InfoProvider. This is a special RemoteCube that allows
    you to define queries with direct access to transaction data in other SAP systems. SAP RemoteCubes are defined on the basis of an InfoSource with flexible updating, and assume the characteristics and key figures of the InfoSource.
    Use/Data Flow
    Unlike with other RemoteCubes, it is not necessary to program extractors. The
    same extractors are used to select data in the source system that are also used when replicating data into the BW. When executing a query, each navigation step sends a request to the extractors for the assigned source systems. In addition, characteristics selection and selection criteria for these characteristics are transformed to fields in the transfer structure, in accordance with the transfer rules. They are transferred to the  extractor in this form. The delivered datasets run through the transfer rules in BW and are filtered once again in the query.
    In your case Remote cube can be an option .
    Cheers
    Raja

  • Error is data loading from 3rd party source system with DBCONNECT

    Hi,
    We have just finished an upgrade of SAP BW 3.10 to SAP NW 7.0 EHP1.
    After the upgrade, we are facing a problem with data loads from a third party Oracle source system using DBConnect.
    The connection is working OK and we can see the tables in the source system. But we cannot load the data.
    The error in the monitor is as follows:
    'Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.'
    But, unfortunately, the error message has no further information.
    If we look at the job log in sm37, the job finished with the following log -                                                                               
    27.10.2009 12:14:19 Job started                                                                                00           516          S 
    27.10.2009 12:14:19 Step 001 started (program RSBATCH1, variant &0000000000119, user ID RXSAHA)                    00           550          S 
    27.10.2009 12:14:23 Start InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG                                              RSM1          797          S 
    27.10.2009 12:14:24 Element NOAUTHORITYCHECK is not available in the container                                     OL           356          S 
    27.10.2009 12:14:24 InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG created request REQU_4FMXSQ6TLSK5CYLXPBOGKF31G     RSM1          796          S 
    27.10.2009 12:14:24 Job finished                                                                                00           517          S 
    In a BW 3.10 system, there is no  message related to element NOAUTHORITYCHECK. So, I am wondering if this is something new in NW 7.0.
    Thanks in advance,
    Rajib

    There will be three things to get the errors like this
    1.RFC CONNECTION FAILED
    2.CHECK THE SOURCE SYSTEM
    3.CHECK IT OUT WITH Oracle Consultants WEATHER THEY ARE FILLING UP THE LOADS.TELL THEM TO STOP
    4.CHECK I DOC PROCESSING
    5.FINALLY MEMORY ISSUES.
    6.CATCH THE DATA SOURCE FIRST CHANGE IT AND THEN ACTIVATE AND RUN THE LOAD
    7.LAST IS MEMORY ISSUE.
    and also Check the RFC connection in SM59 If  it is ok then
    check the SAP note : 692195 for authorization
    Santosh

  • Data upload from third party system to GRT table.

    Hello,
            Can you please let  me know how we can upload payroll data from a legacy system (to be more clear, how to upload data that we receive from a third party system) into GRT table. 
    Note:The file should be tab delimited text file.
    As of now, i figured out 2 FMs which I thought can be used.....BAPI_EXTPAYROLL_INSERT_OUT and BAPI_EXTPAYROLL_INSERT_LEGACY.
    Please let me know the steps to upload the same (start to end).  A code snippet will be of much help to me.
    Regards,
    RK

    Are you looking for loading your legacy payroll data into SAP ?
    SAP have a standard tables (T588B & T588C) that can be used along with standard schema (XLK0) for updating payroll results.
    They also have a utility program to upload data into T588B & C.
    Search for  Legacy Data Transfer in IMG and yo will find the relevant steps.
    Regards
    Ravikumar

  • Mass Data upload in SAP from 3rd party system

    Hi Experts.
    Can anyone help me how to do mass data upload in SAP. Actually, when any new joining is done, a form is being filled by employee(joining form), and that data is finally updated in SAP manually using various infotypes. Now, i m planning to make that form available in webpage. The employee will go to the webpage, fill the data , also the HR will fill the required fields, and once the form is complete, the data will get updated in SAP, in resp. infotypes. Like personal details in infotye 2, address in infotype 6, bank details in 9 and so on, in a single shot. Is there any BAPI or something like that, using which this can be achieved.
    Thnx
    S Kumar

    You can try BAPI_BANK_CREATE for IT0009, BAPI_ADDRESSEMP_CREATE for IT0006 and BAPI_PERSDATA_CREATE for IT0002. Otherwise, you can also use FM HR_MAINTAIN_MASTERDATA to create any infotype.
    Have a look also at the Life and Work Events functionality in SAP Portal (http://help.sap.com/erp2005_ehp_04/helpdata/EN/f6/263359f8c14ef98384ae7a2becd156/frameset.htm)

  • Can PU12 fetch results from 3rd-party payroll systems?

    Gurus:
    We have configured PU12 to export master data or master/payroll data to 3rd-part systems.
    Could you tell us how to fetch the results from external 3rd-party systems back to our ECC system?
    Thanks!

    Hi Ashley,
    You can import the wage types from 3rd party systems into SAP. Then you can run the payroll in SAP system.
    Check the following description taken from help.sap.com.
    You use the Import wage types function to transfer wage types from a third-party system to the
    payroll results of the SAP System.
    For more information, see the Implementation Guide (IMG) for Cross Application
    Components under Predefined ALE Business Processes   Human Resources 
    HR External Systems   Connection With an External Payroll System   Import
    Payroll Results or in the SAP Library under CA Cross Application Components 
    Business Framework Architecture (CA-BFA)   Library of ALE Business Processes
      Human Resources   Human Resources - External Applications   Process Flow:
    Import Payroll Results from a Third-Party System [Ext.].
    Starting the Import
    Prerequisites
    You have successfully run payroll in a third-party system.
    Procedure
    1. In the menu, choose Import wage types   Create IDocs.
    You access the IDoc Inbound Processing Via File screen.
    2. In the Complete file name field, enter the name of the input file.
    3. Choose Execute.
    The system message contains the number of created IDocs.
    4. In the menu, choose File   Import wage types   Create IDocs.
    You access the Inbound Processing of IDocs Ready for Transfer screen.
    5. Enter MANAGEREXTPAYROLL_INSERTOUT as the Message type and, if required, enter the
    Creation date and the Creation time.
    6. Choose Execute.
    Result
    The wage types created in the third-party system are available for further processing in the
    interface tables of the SAP System.
    You can then start payroll in the SAP System and perform the subsequent payroll activities:
      Create a remuneration statement
      Run posting to Accounting
    Regards,
    Dilek

  • Duplicate transactions in GL Journals when imported from 3rd party

    Hi All,
    Normally everyday we receive data from 3rd party system will imported to GL via GL interface tables. A scheduled program 'Journal import' is being scheduled every night which was in error status since last 4 days.
    So we have deleted certain transactions from the GL interface tables using delete command and imported the good ones into GL. Now when we see the amount is doubled.
    Any ideas. Have we done anything wrong?
    This is 11i.
    Thankyou in advance,
    Sudah

    Hi All,
    The journals that were imported are in Posted status. We have more journals than expected like almost doubled. what is the fix for this.
    Please help.
    Regards,
    Sudha

  • Distribute different versions of data to 3rd party systems from SAP ERP2004

    Dear fellow SDN users
    I am working in a large retail company where we are about to implement a new store system. The new system should be implemented in phases, where each phase covers one or multiple countries. Until the implementation is complete, our old store system should still be supported.
    My problem is that we also need to support multiple versions of the systems, which is something we have never done before. Do any of you guys have any experience in how to differentiate versions of the data being sent from SAP to 3rd party systems? The scenario today is:
    SAP ECC 6.0 -> SAP PI 7.0 -> STORE SYSTEM1
    And the scenario we would like in the future:
    SAP ECC 6.0 -> SAP PI 7.0 -> STORE SYSTEM1/STORE SYSTEM2
    (Where it is possible to send several versions of data: e.g. ARTMAS ver. 1 to SYSTEM1 and ARTMAS ver. 2 to SYSTEM1 and ARTMAS ver. 1 to SYSTEM2)
    The first thing that came to my mind was to differentiate on IDOC extension and then program different routines per extension when sending the idocs, but I guess there should be an easier way.
    Any idea is greatly appreciated.
    Best regards,
    Chris

    Hi Chris
    I guess it depends on how the information you want to send to various partner systems differs, but have you considered using reduction?
    I am at a client currently where we need to send similar information to a number of systems - for example Customer information using the DEBMAS message type, is going to three seperate systems.
    To do this we defined 3 reduced messages - Tcode BD53.  This not only reduces the load placed on PI/whatever middleware system is used by eliminating unnecessary data from each message variant, but allows the message to be treated differently by PI, using different data mappings, distribution models etc.
    Hope this helps

  • Extraction of data from ECC to 3rd Party systems

    Hi All,
    I want to know all the options available for extracting data from ECC to a 3rd party system (custom datawarehouse like Teradata, hyperion etc). Also, I want know if there is a best practice documentation available for extraction of data from ECC to any 3rd party system?
    Thanks,
    SB.

    Hi SB,
    Check the following link
    http://expertisesapbi.blogspot.com/2010/06/how-to-transfer-data-from-sap-system-to.html
    Ranganath.

Maybe you are looking for

  • External Hard Drive with Time Machine

    I have an iMac MID 2011 21.5". Regarding an external HD with TIme Machine : 1. Is there a difference between 5400 rpn and 7200 when using TIme Machine ? 2. Is the lower HD ( 5400 ) can slow the iMac more then the 7200 ? Thank you

  • Need to play video inside forms applet window

    Hi, I need to call a video inside oracle forms (10g), This can be acheived through Client_host() or by web.show_document. But the problem is that both methods opens the video in new browser window. Where as my target is to play the video inside speci

  • HT1535 How can I get rid of duplicates on my iPad.

    How can I get rid of duplicate songs on my iPad

  • How to provide Responsiblity level security in OBIEE 11g

    Hi all, Can any one tell me how to provide the responsibility level security in OBIEE 11G.

  • Prevent a dump after a RFC call

    Hello. I created a function group wich is used in a program through a RFC call. I'm trying to prevent a dump of the program, in case the RFC can't reach his destination for example. How can i do that ? Is it in the exception of the function or do you