Data is missing for Jan,Feb in 2008

Hi,
I have an issue with the report..The Concrete Profitability Report is using the manually uploaded rates for cost types. The business reported that the actual columns in the reports seem OK (since they come from the loaded amounts for the 12 months in 2008), but the budgeted amounts are showing a big variance and they don't look accurate bcoz the values are not calculated for Jan,Feb for 2008.The report runs based on multiprovider.
Perhaps the budgeted amounts for Jan and Feb in 2008 are missing.
Could yoy please let me know how can i proceed further and help me out in this issue.
Thanks
Sindhu

Hi,
Did u check in the respective cube whether the data is available for that period? check in the cube and also do LISTCUBE on multiprovider.
Khaja

Similar Messages

Master Data is missing for Specified Matierials at cube level !!

Hello Experts,
Good Day..!!
I have been facing an issue in my project, Master Data is missing for a KF and values are not displayed in a report for the specified matierial Nos. Where as other matierial nos KF values are displaying.
Intially, i checked from Cube End and found the issue is in Cube level only.
For that in the data flow, i already checked whether the data has been loaded perfectly or not.
Tried to reran the DTP once again and checked the values for the KF in the report and unfortunately KF values are not displaying for specified matierials only.
Kindly advice how can i move further..
Thanks,
SN.

Hi,
Check if SIDs are generated for the infoobject, if not try to do the change run attribute and then load the data to Cube.
Hope this helps...
Rgs,
Ravikanth.

Master data Lookup missing for sold to party

Master data Lookup missing for sold to party?
The look up flow is from E_BOM to E_BOM1
regards

Hi,
Check if SIDs are generated for the infoobject, if not try to do the change run attribute and then load the data to Cube.
Hope this helps...
Rgs,
Ravikanth.

Bank data is missing for country IN bank key SBIB0000003

Dear Friends
When i am start to print the cheque i am getting the error message
"Bank data is missing for country IN bank key SBIB0000003"
Please me suggestion
Regards
JK
Moderator: Please, avoid asking basic questions

Dear,
Please check in T-Code FI02, that
Bank Country = IN
Bank Key = SBIB0000003
Have you maintained any data there.
Please revert.
Br,VIvek

Date added missing for itunes 12.

In previous version of iTunes there was a column header option for audiobooks called date added. (when book was added to iTunes). I use the header to sort in reverse order so I get most recently added books at top of list. This option seems to be missing in 12.0.1

It is still there. If you hold the cursor over any column header then control-click a long drop down list appears so you can select your column headers
EDIT: I am sorry, I misread "audiobooks". This reply is only valid for the Music category, I can't verify it for the audiobooks category

Transaction Data Icon Missing For FlatFile Datasource

Hi All,
We are loading the data by using the flat file data is loaded successfully.But beside the cube we will have activation icon , Aggregates Icon and Transaction data icon. In our case we are missing transaction data icon.What could be the reason.
But data loading is fine and for some of time chars also data missing .
Pls anybody can throw some light on this.
Thanks in Advance,
Shah.

Hello S SR,
How r u ?
just see the top and make the column adjustment like we do in MS-EXCEL you can see the Transactional Data ICON.
Best Regards....
Sankar Kumar
+91 98403 47141

Meta-Data are missing for table

Dear ALL ,
I am trying to call "HR_READ_INFOTYPE" from a Java program using rfc and I got this error:
" Meta data equal to null is not allowed for field INFTY_TAB with type TABLE in meta data instance TABLES "
the required table INFTY_TAB is used as a generic table in the function module. I tried to use PA0008 but it seems it is not possible to use it through RFC call. How can I avoid this exception?
Thanks in advance.
Mehdi.

Hi,
This function by default is not remote enabled. Loot at BAPI to access/modify infotype data?
Regards,
Jarek

SQL Developer 2.1.0.63 - Export Data menu missing for SQL Server databases

Hi
The Export Data menu only appears for Oracle databases in this version, it does not appear for SQL server databases.
To demonstrate:
Press F9 to run query
Right click on Query Result data
For Oracle an Export Data sub menu appears
For SQL server no Export Data sub menu appears
This worked in previous versions.
Is this functionality going to reappear?
Thanks
Dave

Hi,
Looks like this is exactly the same problem for third party connections as I have the exact same issue for mySQL.
I had to apply 1.5.5 version to fix it.
Hope we're going to have this solved !
Thanks,
JP

Email subject and sender data is missing for HTML contents

Dear all,
Good day. I tried to send an email with HTML codes to draw a table. It works, however, the email sender and subject are missing. And the email body looks like the following:
To: abc From: xyz Message-Id: Subject: This is email subject. Mime-Version: 1.0 X-Mailer: SAP R/3 Internet Mail Gateway 4.6B1 Content-Type: TEXT/HTML; Charset="US-ASCII"; Name="NO NAME.HTM" Content-Transfer-Encoding: 7BIT
Table header and contents.
Anyone has idea on what it happens and what is the solution? Your help and advise are greatly appreciate. Thanks in advance.
Regards,
CN

is there any problem with Background spools with SAP? We are running R3 here. And looks like its the spool background job that's creating the error. When i execute the report it shows all the record in print preview or if i print it.
Please Help!

Data missing for plant

Data is missing for a certain plant in spare parts infocube (BW). Please suggest me any reasons why this can happen.
Thanks.

Hi anand,
Check the data in PSA.
If you have the entries there for the missing plants then
Check the transfer structure whether any routines is used or not.(check plant info object also other info objects whether it has any routines or not) then check in the update rules whether there is any start routine defined , also check the fields in the update rules for availability of routines.
Also in the monitor screen drill down the data packages right click on any package and simulate update , select all records for simulation and then simulate it and check.
Regards
RaM

OracleAS Data Source Plugin for OmniPortlet for SAP

Hi,
What is the later version for the OracleAS Data Source Plugin for OmniPortlet for SAP ?
Still BETA release ?
thanks

Hello,
We get the same error message for our WD4J application now
"JCo data source missing for type: class com.company.application.main.model.Tvm1T class com.sap.aii.proxy.framework.core.DataAccessException"
Does anybody know the reason for this?
Thanks,
Robert

Calendar entries missing Jan & Feb

I find all entries made Jan & Feb 2013 on the calendar are all missing and when you make a new entry they also disapear. This happens on all my apple devices & all my freinds & colleagues. But when I go onto a web browser and log onto the iCloud they all appear! Not working for me as a calendar as it is, not relliable.
Is this the same across the Apple world????

Yes it is the same unless you change your settings to sync all events. You can find it if I am not mistaken under settings, mail contacts and calendars, scroll down to calendar and one of the lines will say "sync" change to all events. Good luck!

Error " Data missing for the entry check while creating a new waste code

Hi all, While setting a new Waste code I get the error " Data missing for the entry check, correction:". while filling the NAM- WASTECOCAT - LER item.
This sould look for the catalog's name included in the phrase set but for some reason it doesn't find it giving me this error.
I am changing original Characteristics, phrase set, classes, and value assignment type. Just to have my own estructure with Znames for all of them.
I have also change the enviroment parameter "WAM_PHRSET_WACATLG" with the name of my phrase set.
I have checked everything several times watching for typos or looking for a missing step.
I have even tried including my new Z's characteristics in the classe and living the original SAP_EHS_1024_001_WASTE_CATALOG. (changing the enviroment parameter WAM_PHRSET_WACATLG to SAP_EHS_1024_001_WASTE_CATALOG) and it works.
I will like to change this characteristic by Z_EHS_WA_WASTE_CATALOG
Phrase set to Z_EHS_WA_WASTE_CATALOG.
enviroment parameter WAM_PHRSET_WACATLG= Z_EHS_WA_WASTE_CATALOG
After matching up the master data It should work fine but I might be missing something to get it running ok.
¿Any idea?
Regards,
Alvaro

Hello Juan Carlos, the value and class that I want to duplicate and doesn't work is for Waste Code, I have also duplicated the one you have displayed (waste pproperties) without any problem.
1.I have duplicated and changed class SAP_EHS_1024_001. to Z_EHS_WA
2. Create a copy of the 5 characteristics included in this class.
SAP_EHS_1024_001_WASTE_CATALOG
SAP_EHS_1024_001_WASTE_CODE
SAP_EHS_1024_001_WA_SUBCATEG
SAP_EHS_1024_001_WA_CATEGORY
SAP_EHS_1024_001_REMARK
change the name by
Z_EHS_WA_WASTE_CATALOG
Z_EHS_WA_WASTE_CODE
Z_EHS_WA_SUBCATEG
Z_EHS_WA_CATEGORY
Z_EHS_WA_REMARK.
I checked the funcion C14K_WASTECATLG_CHECK is in the value of the Z_EHS_WA_WASTE_CODE characteristic
I checked the funcion C14K_WASTECODE_CHECK is in the value of the Z_EHS_WA_WASTE_CATALOG characteristic
3. Create phrase sets for each new category. with same name.
4. Match up the master data.
5. Change the enviroment parameter.to Z_EHS_WA_WASTE_CATALOG
I think I have followed all the steps, but for some reason it doesn't find the catalog
The phrase for the catalog is EWC in english and LER in spanish.
Regards
Alvaro.

REQD for Fresh BAM Install 11.1.1.3.0 -Data labels missing issue

Hi
This information is relevant to anyone who is doing upgrading to 11.1.1.3.0.
There are 2 options if you encounter the data labels missing on the Active Studio tab :
(1) Switch to Jrockit
-Edit setDomainEnv.sh in directory $MW_HOME/user_projects/domains/base_domain/bin
-Set JAVA_VENDOR variable
JAVA_VENDOR=Oracle # For JRockit
JAVA_VENDOR=Sun # For Sun JVM
You'll see that JAVA_HOME should then point to "$MW_HOME/jrockit_160_17_R28.0.0-679"
**Jrockit version packaged with the 11.1.1.3.0 install***
-Start services
(2) For people who want to use Sun JDK, access support.oracle.com -- look for patch 9553040
This will provide an upgrade to JDK 1.6.0_20-b03.
Follow the instruction in the read me file . Refer to the following notes
- Upgrade the JDK within the Application Server $OH per the instructions in Note 272808.1
- Upgrade the JDK within the Database $OH per the instructions in Note 418399.1
Regards
Payal
Edited by: PayalS on May 17, 2010 11:07 AM

Hi,
I'm having the same problem than you.
I install the new JDK but now everything work besides BAM.
That happens with you after the upgrade?
The error is :
java.lang.RuntimeException: Invocation target exception.
     at oracle.bam.system.Delegate.dynamicInvoke(Delegate.java:196)
     at oracle.bam.system.threading.LoadObjectDelegate.invoke(LoadObjectDelegate.java:41)
     at oracle.bam.system.threading.SynchedHash.getObject(SynchedHash.java:104)
     at oracle.bam.web.shared.WebPage.userAuthCheck(WebPage.java:1371)
     at oracle.bam.web.shared.WebPage.processRequest(WebPage.java:347)
     at oracle.bam.web.shared.WebPage.processRequest(WebPage.java:316)
     at jsp_servlet._8533.__startpage._jspService(__startpage.java:71)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:416)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:326)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.bam.web.cache.ClientSideCache.doFilter(ClientSideCache.java:93)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.bam.web.filters.GZIPFilter.doFilter(GZIPFilter.java:97)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.bam.web.filters.ValidateBrowserSession.doFilter(ValidateBrowserSession.java:212)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.bam.web.redirect.Redirect.doFilter(Redirect.java:80)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.bam.web.filters.ValidateBrowserSupport.doFilter(ValidateBrowserSupport.java:133)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.bam.web.filters.CharsetFixupFilter.doFilter(CharsetFixupFilter.java:65)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at oracle.bam.system.Delegate$Sink.invoke(Delegate.java:80)
     at oracle.bam.system.Delegate.dynamicInvoke(Delegate.java:186)
     ... 44 more
Caused by: oracle.bam.common.remoting.ServiceUnavailableException: BAM-00223: Service interface oracle.bam.adc.common.core.IDataStore is unavailable.
     at oracle.bam.common.remoting.AgentBase.getServiceWrapper(AgentBase.java:190)
     at oracle.bam.adc.api.util.Context.(Context.java:187)
     at oracle.bam.adc.api.util.Context.(Context.java:161)
     at oracle.bam.web.shared.WebPage.createContext(WebPage.java:248)
     ... 50 more
Caused by: oracle.bam.adc.api.exceptions.ServerUnavailableException: BAM-01261: Cannot connect to the Oracle BAM Server.
     at oracle.bam.common.remoting.ConnectionPoolBase.getLocalService(ConnectionPoolBase.java:954)
     at oracle.bam.common.remoting.ConnectionPoolBase.createProxy(ConnectionPoolBase.java:855)
     at oracle.bam.common.remoting.ConnectionPoolBase.open(ConnectionPoolBase.java:588)
     at oracle.bam.common.remoting.ConnectionPoolBase.open(ConnectionPoolBase.java:77)
     at oracle.bam.common.remoting.AgentBase.getServiceWrapper(AgentBase.java:179)
     ... 53 more
Thank you
CD

0calday master data missing for 2015

Hello
I am having a problem with 0calday master data.
How is this defined?
In the development system I can see that it is only contains values up to 01.02.2015.
How can I define this for future values as well.
I have an IP solution which opens up for time registration on every day. But since 01.02.2015 has passed it will not open up for entering data, since master
data is missing.
Where are these values maintained?
Thx for any input which can lead me to a fix of this urgent issue
BR
Lasse

Hi,
The problem also occurs in prod system
But strangely enough it works in Q system.
The difference between the system seems to be the length of 0calday masterdata, which is used to derive 0calweek (as of my understanding).
There is no regular flow for loading master data i 0calday. (not the same as for e.g 0customer with attributes, hierarchy, text ).
Where can I check the time horisont for which 0calday is defined? I find it strange that it for prod it ends at week 09.2015, for dev it ends at 05.2015 and for q it ends at 09.2018.
There queries and flows in BW is in-sync for all 3 systems.
You mention FI team. Could this problem originate from R/3 source system?
prod
quality

Data is missing for Jan,Feb in 2008

Similar Messages

Maybe you are looking for