Data is missing in PSA

Hi All,
We have done enhancement for generic data source which is create based on function module.
We have added 3 fields and we are able to see the data in RSA3.
But after ran the infopackage we are unable to see the same data for those three fields in PSA.
We have replicated the data source and we are using BW version 7.1.\
What could be the issue, could you please advice me to resolve this.
Thanks in advance,
Ajay

Hi Ajay,
I still can't seem to find a pattern in what you're saying to offer a good solution. Something funky is going on.
Are you using 3.x or 7.x data flows?
One other test you can perform is to try to execute RSA3 and choose the target system as the BW system and see if those 3 fields are populated or not if not then follow the suggestions below.
In case of 3.x make sure your new fields are also present in the transfer structure if they are not then they will not be shown in the PSA.
If using 7.x
I suggest manually activating the DataSource in BW. If that still doesn't help I would suggest deleting the DataSource in BW completely and replicate the DataSource once more and activate it in BW manually. This procedure has helped me in the past. Hopefully nothing in your function module code is causing issues.
Regards
-Sid

Similar Messages

Missing data when loading to PSA in 7.0

Hi all,
I have a problem with a 7.0 load.
I am loading a init load from R3 into DSO.
I have made a test extraction in R3 (RSA3) and I have 145258 records in R3, but when loading into PSA, I only retrieve 100.000 records... it is very extrange and maybe I am missing something from the new 7.0 version but I have no clue about what could be the error.
could anyone help me to solve this?
Many thanks!

Hi,
You are using BI 7.0,that means you are loading data to target from PSA using DTP.
May be you are using Full Update infopackage but while loading to target you are using Delta DTP.
Due to this it loding only the new changed records from PSA.
Make the DTP full update then it will pick all the records.
Kindly reward me some points if suggestion help you.
Regards,
Debjani
Edited by: Debjani Mukherjee on Aug 25, 2008 10:05 AM

Data not received in PSA Table(urgent)

hello,
While loading Master data full load
which is a load of 457070 on 2days back
where only 4lac records r received to PSA but remaining 57070 was missing
with error<b> Data not received in PSA Table
</b>
when the next day we loaded 5lac records and we got the same error<b> Data not received in PSA Table</b> where except 57070 records remaining all reached PSA
where we tried 2day with 550000 records, same error without 57070 records all other reached to PSA
I required ur help to solve this
i will thank by giving points
Regards
PSC

Hi,
check if there is a TRFC haging in SM58.
can that be that your DB cannot extend its space for this amount of data.
How do you perform the load?
package by package (in series or in parallel)? could that be that the next stage (into IObj) is failing thus stopping the load in the PSA?
Can you try to perform the same load with only to PSA and then enable the "susbsequent update in target"?
As already mentionned it could also be that an IDOC is haging...
please let us know
Olivier.

Delivery date is missing in BW

Hi All,
Delivery date is missing in BW for few PO's.. I have checked all transformations and routines everything is fine.. in R/3 for same PO's delivery date exist but in BW for PO item in PO's delivery date is missing... what may the cause for this
Data source: 2lis_02_itm and 2lis_02_scl
Regards
Sreekanth

Did you check the data in RSA7 for the current delta and then in the PSA?
Do you have the Delivery dates shows there?
If yes, then there is something wrong while updating the dates in the further BW targets.
In the other case, where in PSA itself the dates are not available, you'll have to check the R/3 side. Maybe the data source?
Hope this helps.

Actual Goods Movement Date is missing in 2LIS_11_V_SSL

Hi
Daily we are loading the Order Delivery data from the 2LIS_11_V_SSL datasource into the Global Level DSO(ZTEST) and it is snapshot of ECC Production System . That means, only the latest data is avialable in the ZTEST DSO .
Now for some of the Sales Order's , actual goods movement date is missing in the ZTEST DSO. So i need to investigate why the actual goods movement date to missing in the ZTEST DSO .
So i want to test this datasource(2LIS_11_V_SSL ) whether it is bring the actual goods movement date or not .
So how can i test this datasource 2LIS_11_V_SSL . Do i need to populate the setup with a particular sales order number.
What is the steps for that . Please let me know .
Regards
Mohammed

Hi,
Please check the PSA data first whether the field is empty . Because sometimes if you have not added the correct key fields in the DSO,you may not get the changes. So check the PSA first. If it is empty then check the data in the ECC system . If you use the standard field for the actual goods movement date please check with the functional consultant whether the below logic is followed (extracted from help.sap.com) for those sales order missing the date .
MCEX_I_WADAT
Actual goods movement date of a delivery
Definition
This field contains the actual goods movement date of a delivery of an item order.
Use
The field is only used in the extract structure MC11V_0SSL (DataSource 2LIS_11_V_SSL).
There, this date is determined for one delivery at a time, and is assigned to all data records for this delivery.
In these data records, you are dealing with confirmed quantities of order schedule lines, which are assigned a corresponding delivery item as delivery.
The date is only assigned if it was entered in the associated delivery.
If the logic is correct for the sales order ,then you need to reload the data .Fill the set-up table with those missing sales orders ,and run RSA3 with the selections after the set-up table filling. Check the data again here and if you find date values,then you can run the repair full request to load the data.
Still if you miss the date ,as i said earlier please check with the functional people whether any business logic is missing .
Thanks.

COPA cost based data source missing data in BI

Hi All,
We have a copa cost based datasource.User has complained that some data is missing in BI frrom R3.When we checked in Infopackage history no data loads got failed and all requests were succesful.
Is there still a chance that data might get missed.
I created a full infopackage and again ran the load .Again load is green and complete.Still the same data comes in PSA.
Should i need to check repair full request flag.
What could be the other reason.User sent the R3 COPA report screenshots highlighting the missing data.
Regards,
Sushant

Hi,
Please check if all the value fields from ECC have been mapped in BI system.
May be the case that some value fields were not mapped & hence the data is missing.
try & reconcile your data with the data from table CE1<OP Concern> from ECC side.
u can Make use of transaction KE24 aswell.
Thanks & Regards,
VIraj Dhopavkar.

Data not received in PSA Table

hi guyz,
im facing the below issue while loading master data attr from source system to bi system.
im loading data from 0vendor_attr to ovendor object.
only half of the records are processed and gets hanged.
in monitor- administrator workbench its showing (60434 from 157912 records)
below are the details of the issue:
Data not received in PSA Table
Diagnosis
Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BI, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump.
please guide with your expertise.
cheerz,
raps.

Hi Rajeev,
Check the job in Background (SM37), you can analyze from here.
Check the short dump in ST22.and check system performance once.
If you are facing this problem first time, cancel the background job and make the request red.
Then repeat the IP again, it will get successful.
This should be due to performance issue or RFC problem of your system.
If the job is active in SM37, cancel the job and make the status IP red.
Re run the IP, it will get successful.
Regards,
Venkatesh
Edited by: Venky1903 on Aug 15, 2011 2:09 AM

Data not received in PSA Table 0ORGUNIT

Hi,
We have an issue with a text load to 0ORGUNIT with around 35 lakhs of records. This particular load taking lot of time and resulting in short dump with the message 'Data not received in PSA Table'. But when iam making the request red and restarting it manulally it will get succeeed with in 15 minutes. The load is starting at 2:30 UK time and getting failed. I am restarting it at around 9 '0 clock and it got succed . The same thing happening from past 7 days. Can any one tell me what might be the reason and solution for this? Is this temporary memory issue? As the load is to an info object nothing to do with indices.
Thanks in advance
K

You can change the size of the Data Packet.
Open InfoPackge.
From Top Menu choose "Scheduler >> DataS. Default Data Transfer".
Default setting of the Source System will be shown.
Keeping that in mind, try to reduce the "Max Size" & "Number of Data Packages per Request". You might need to try this a couple of times with lesser values each time to ensure that the issue resolves.
Regards
Anujit Ghosh

Data not received in PSA Table - Data of request already deleted

Hi
I'm running a delta load on a BI 7.0 system and get this error Data not received in PSA Table.
And when I click on the PSA table it telling me that Data of request XXXXXX already deleted.
I have tried to do a consistency check in RSRV. See if there's any IDOCs in pb87.
And the short dump analysis just say:
A RAISE statement in the program "SAPLRSSM" raised the exception
condition "NOT_EXIST".
Since the exception was not intercepted by a superior
program, processing was terminated.
I've also tried to repeat the load but with no luck.
Anyone know how to fix this?
Thank you in advance

Hi,
Delete the bad requests in 3 targets and delete the data mart status in Source DSO.
Also delete the green request in the Source DSO and repeat it.
Once it loads successfully then load the data to other 3 targets.
Rgds,
Ram

Urgent help needed: registry.dat is missing when i run my form in web base

Hi gurus,
i configured my forms and report server in windows 2003 and i received the following error msg when tryin to access my web base forms 6I.
FRM-92129: Registry file http://domain.com/form60java/oracle/forms/registry/Registry.dat is missing.
Details...
Java Exception:
oracle.forms.engine.RunformException: FRM-92120: Registry file http://domain.com/form60java/oracle/forms/registry/Registry.dat is missing.
at oracle.forms.engine.Runform.initRegistry(Unknow Source)
at oracle.forms.engine.Runform.startRegistry(Unknow Source)
at oracle.forms.engine.Main.createRunform(Unknow Source)
at oracle.forms.engine.Main.start(Unknow Source)
at sun.applet.JinitAppletPanel.run(Compiled code)
at java.lang.Tread.run(Thread.java:466)
what can be goes wrong with my steps to receive the above error?? i tried in windows XP and Vista, and i getting the same error message as above.
Your urgent help and advise is needed plssssssss.......
Many thanks in advance.

The URL doesn't seem correct: http://domain.com/form60java/oracle/forms/registry/Registry.dat
I'm expecting a slash (/) between forms60 and java. Have a look in the formsweb.cfg if any paths are misconfigured.
Also, try if the URL with the slash:
http://domain.com/form60/java/oracle/forms/registry/Registry.dat
does work when you just paste it in a browser. It should download the Registry.dat file

FRM 92120 Registry dat is missing

The error> FRM-92120 <to log into an EBS instance and click on a Form (with all the forms).
------- error ------
FRM-92120 Registry file http://hhh.xxx.com.br:8000/OA_JAVA/oracle/forms/registry/Registry.dat is missing
Details:
Java Exception:
oracle.forms.engine.RunformExeception: FRM-92120:Registry file http://hhh.xxx.com.br:8000/OA_JAVA/oracle/forms/registry/Registry.dat is missing.
at oracle.forms.engine.Runform.initRegistry(Unknow Source)
at oracle.forms.engine.Runform.startRunform(Unknow Source)
at oracle.forms.engine.Main.createRunform(Unknow Source)
at oracle.forms.engine.Main.start(Unknow Source)
at sun.plugin2.applet.Plugin2Manager$AppleExecutionRunnable.run(Unknow Source)
at java.lang.Thread.run(Unkwon Source)
I have done the following steps
----------------------------------------------------- >>>> http://finance-kc.gsa.gov/webbill/faq.shtml#l10
Step 1: Verify that SSL v2.0 and v3.0 options are checked in Java Control Panel.
a. Click 'Start' menu on Windows taskbar and select 'Control Panel'. If you do not find 'Control Panel' directly under 'Start' menu, then you should find it under 'Settings'
b. Locate an entry named 'Java' on Control Panel window and double click on it
c. Click 'Advanced' tab on Java Control Panel window
d. Locate setting named 'Security' and click on the plus sign prefixing it to show options
e. Verify the option 'Use SSL 2.0' is checked and if not check it
f. Verify the option 'Use SSL 3.0' is checked and if not check it
g. Click 'Apply'
h. Click 'OK'
Step 2: Close your browser session.
Step 3: Open a new browser session and try the register or login action again to see if it works okay. If not, proceed to next set of steps.
Step 4: Re-start your computer.
Step 5: Open a browser session.
Step 6: Clear your browser temporary Internet files by taking the steps stated below.
a. Select 'Tools' from Internet Explorer browser menu
b. Select 'Internet Options'
c. On the 'General' tab, under section labeled 'Temporary Internet Files', click 'Delete Files' button
d. Click 'OK' on Delete Files confirmation box
e. Upon completion of delete files, click 'OK' on Internet Options
Step 7: Close your browser session.
Step 8: Open a new browser session and try the register or login action again to see if it works okay. If not, proceed to next set of steps.
Step 9: Clear your Java temporary Internet files by taking the steps stated below.
a. Click 'Start' menu on Windows taskbar and select 'Control Panel'. If you do not find 'Control Panel' directly under 'Start' menu, then you should find it under 'Settings'
b. Locate an entry named 'Java' on Control Panel window and double click on it
c. On the 'General' tab, under section labeled 'Temporary Internet Files', click 'Delete Files' button
d. Click 'OK' on Delete Files confirmation box
e. Upon completion of delete files, click 'OK' on Java Control Panel
Step 10: Close your browser session.
Step 11: Open a new browser session and try the register or login action again to see if it works okay. If not, provide the following to the help desk: the browser name and version used, Java plug-in version used, sequence of events leading up to the issue or problem being reported and any message displayed in a screenshot or text format and/or describe browser behavior that will help us with troubleshooting.
====================================================================================================
And also did not resolve the error then appealed to the Deployment Guide in página157 --http://otndnld.oracle.co.jp/products/forms/htdocs/install/Materials/doc/EN/B14032_02.pdf
A.2.3.6 FRM-92120
Cause:
This is a server configuration error, which occurs when the client is unable to find the
file Registry.dat on the middle tier.
Solution:
When this error occurs, check if the file Registry.dat is present on the middle tier in the
directory ORACLE_HOME/forms/java/oracle/forms/registry. If it is not
present, then it needs to be placed.
In a running Forms application, if you suddenly come across this error, there is a
possibility that the HTTP server has gone down. You may verify this by typing the
Diagnosing Server Crashes with Stack Traces
A-8 Deployment Guide
URL http://myserver.com:NNNN in your browser. Here you need to replace
myserver.com with your host name and NNNN with your HTTP server’s port
number. If your browser says that it could not connect to the server, then your HTTP
server is down and you need to contact your system administrator to bring it up.
When the HTTP server is up and running, on giving the URL
http://myserver.com:NNNN your browser will show the “OracleAS welcome”.
=============================================================================================
also had no positive effect.
I test in different browsers, different machines, the Jinitiator removed and installed again.
The versions I'm using are
EBS - R12.0.4
Java 1.6.0_15
Browsers - IE 8 e Mozzila Firefox 3.0
Can someone suggest something else.
Extremely grateful for any suggestion.

Hi,
What changes have been done recently?
Did AutoConfig complete successfully on all tiers?
If SSL has been enabled recently, please run SSL diagnostics tests and make sure all runs successfully -- Search "My Oracle Support" for "SSL Diagnostics R12".
Enable debug and see if you get more details about the error -- See (Note: 422419.1 - R12, 12.1.1 - How To Enable and Collect Debug for HTTP, OC4J and OPMN) and (Note: 438652.1 - R12: Forms Runtime Diagnostics (FRD), Tracing And Logging For Forms In Oracle Applications).
Regards,
Hussein

Schedule Line Item 100001 delivery date is missing

Hello Sirs,
After created a sales order in ECC and transferred to TM via XI, the queue remains with STOP status. Entering in transaction /SAPPO/PPO2 I’m facing the error “Schedule Line Item 100001 delivery date is missing”. The delivery date is filled in ECC side.
Is there something that I need to check in TM regarding delivery date?
Thanks.

Please try to edit the PO[Change date] and process it again. This issue happens when we use a conversion program to create PO instead of creating it from UI.

Have made a rebbot from Time Machine, and now I lack a lot of pictures. Can see icons, but not enlarge them. Especially pictures where 2009 is included in the date is missing? When I set up my desktop, I can find some of the pictures. Where do They hide,

Missing Pictures.
Have made a rebbot from Time Machine, and now I lack a lot of pictures. Can see icons, but not enlarge them. Especially pictures where 2009 is included in the date is missing?
When I set up my desktop, I can find some of the pictures. Where do They hide, and what shall I do.
Have made back up, but unfortunately a little too late. What to do?
MacBook Pro 15 "late 2008, Processor 2.53 Ghz Intel Core 2 Duo, Graphics NVIDIA GeForce 9400M 256 MB, Software Mac OS X 10.7.4 Lion (11E53).

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

I downloaded apps purchased with another Apple ID. But my data is missing. What can I do to get them back? I have a different iCloud id.

I downloaded apps purchased with another Apple ID. But my data is missing. What can I do to get them back? I have a different iCloud id.

All apps are tied forever to the Apple ID used to obtain them, that is also true with In-App purchases.
Content bought using one Apple ID cannot be merged or transferred to another Apple ID.

ICal Date Headings Missing from Day and Week Views

Good morning,
A few days ago, the date headings disappeared from the Day and Week views in iCal. I can see the date heading in Month view, but when I switch back, the dates are missing. All of my events are there, and correct.
I have resolved font duplications and restarted iCal, to no avail.
Thanks for your help.
W

Still no date headings when my calendar is views in the Day and Week views. All of my appointments are there. The days of the month appear in Month view. But when I change to week or day, I don't know what day I'm looking at because there are no dates. Only "2010" appears in the upper left.
Any ideas? I couldn't be the only one this has happened to!
Thanks, Wendy

Data is missing in PSA

Similar Messages

Maybe you are looking for