Data is not being downloaded properly in EXCEL

Hi,
When i am tring to download any data from SAP , for example user list from Tcode SM04 to excel,
its coming in one single row from prodction server , whereas its working fine from IDES Srver.
please assist ,
Thanks,
Irfan.

Sarath
if visu's notes helped.. its good practice to show your appreciation by awarding him points.
also if this sorts your issue it would be a good idea to close the thread
thanks
harish

Similar Messages

  • OHS - Protocol (Periodic) Next due dates are not being captured properly

    Protocol (Periodic) Next due dates are not being captured properly in the Planning Cockpit (EHSH_D_PCP) report nor the Protocol report (S_SH8_7200013).  The Planned date is not resetting itself for the medical service sometimes.
    Any idea what might be causing this issue?
    Regards
    Naveen

    HI Naveen
    Have you overridden the std BADI for calculating Next due date?
    Thanks
    Jagdsh

  • When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

    Problem:
    When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
    Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
    Symptoms:
    1)   Sync:  It’s not completing the sync.  Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options.  I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
    waiting for sync to start (step 1 of 7)
    backing up (step 2 of 7)
    preparing to sync (step 3 of 7)
    determining apps to sync (step 4 of 7)
    preparing apps to sync (step 5 of 7)
    importing photos (step 6 of 7)
    waiting for changes to be applied (step 7 of 7)
    syncing apps / copying 1 of 4 (App name) (step 7 of 7)
    canceling sync
    apple icon
    2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone.  All of the albums are correct/complete in iPhoto.  All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
    3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list.  If I click on Update All, the Apps are successfully updated in iTunes.  But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
    Other Potential Pertinent Info:
    The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago).  Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed.  I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive.  Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself.  However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive.  All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
    Settings/Status:
    MacBook Air
    OSX v. 10.9
    iPhoto ’11 v. 9.5 (902.7)
    iPhone iOS 7.0.4
    iTunes v. 11.1.3 (8)
    Summary Tab
    Backups (This Computer)
    Options
    Automatically sync when this iPhone is connected
    Sync only checked songs and videos
    Photos Tab
    Sync Photos from iPhoto (429 Photos)
    Selected albums, Events, and Faces, and automatically include (no Events)
    Albums – 9 are selected

    You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

  • Complete data is not getting downloaded in XL

    We have developed one Z report to take the status of open purchase order for projects. While downloading it to XL (ofiice 2007 installed on PC), complete data is not getting downloaded.
    I would like to know whether it is XL problem or it is some bug in the report itself.
    Pl. help.

    While downloading the data to excel , try the following option
    List -- > Export -- > Spreadsheet -- > Excel(in MHTML Format).
    The download will authormatically open in excel window. Save it as excel file

  • [svn] 1978: Bug: vendors. properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly .

    Revision: 1978
    Author: [email protected]
    Date: 2008-06-06 08:05:34 -0700 (Fri, 06 Jun 2008)
    Log Message:
    Bug: vendors.properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly.
    QA: Yes - we need automated tests to make sure that errors.properties and vendors.properties in BlazeDS/LCDS are loaded properly.
    Doc: No
    Modified Paths:
    blazeds/branches/3.0.x/modules/common/src/java/flex/messaging/util/PropertyStringResource Loader.java
    blazeds/branches/3.0.x/modules/opt/src/jrun/flex/messaging/security/JRunLoginCommand.java
    blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. java

    I have a lot of grief with this version of Windows Media Player.
    It is very buggy and frustrating to use.
    I have my Music library on a QNAP NAS, which is as reliable as they come.
    System notifications make it not save changes.  It also does not do a good job of interpreting albums and artists from folders.  Changes to track names are not saved, nor are tracks moved to other albums, renamed albums, changes to genre, artist
    or date.  It separates and merges albums/tracks without sense or reason.  Some changes I've made up to 4 times, then closed WMP and re-started my machine to check if it has/hasn't saved the changes.  Often it has not.
    This is the first time I've used WMP in this capacity, and I do not recommend it.
    New service pack please.

  • Popularity trend/usage report is not working in sp2013. Data was not being processed to EVENT STORE folder which was present under the Analytics_GUID folder.

    Hi
     I am working in a sharepoint migration project. We have migrated one SharePoint project from moss2007 to sp2013. Issue is when we are clicking on Popularity trend > usage report,  it is throwing an error.
    Issue: The data was not being processed to EVENT STORE folder which was present under the
    Analytics_GUID folder. Also data was not present in the Analytical Store database.
    In log viewer I have found the bellow error.
    HIGH -
    SearchServiceApplicationProxy::GetAnalyticsEventTypeDefinitions--Error occured: System.ServiceModel.Security.MessageSecurityException: An unsecured or incorrectly
    secured fault was received from the other party.
    UNEXPECTED - System.ServiceModel.FaultException`1[[System.ServiceModel.ExceptionDetail,
    System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
    HIGH - Getting Error Message for Exception System.Web.HttpUnhandledException
    (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.ServiceModel.Security.MessageSecurityException: An unsecured or incorrectly secured fault was received from the other party.
    CRITICAL - A failure was reported when trying to invoke a service application:
    EndpointFailure Process Name: w3wp Process ID: 13960 AppDomain Name: /LM/W3SVC/767692721/ROOT-1-130480636828071139 AppDomain ID: 2 Service Application Uri: urn:schemas-microsoft-
    UNEXPECTED - Could not retrieve analytics event definitions for
    https://XXX System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
    UNEXPECTED - System.ServiceModel.FaultException`1[[System.ServiceModel.ExceptionDetail,
    System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
    I have verified few things in server which are mentioned below
    Two timer jobs (Microsoft SharePoint Foundation Usage Data Processing, Microsoft SharePoint Foundation Usage Data Import) are running fine.
    APPFabric Caching service has been started.
    Analytics_GUID folder has been
    shared with
    WSS_ADMIN_WPG and WSS_WPG and Read/Write access was granted
    .usage files are getting created and also the temporary(.tmp) file has been created.
    uasage  logging database for uasage data being transported. The data is available.
    Please provide pointers on what needs to be done.

    Hi Nabhendu,
    According to your description, my understanding is that you could not use popularity trend after you migrated SharePoint 2007 to SharePoint 2013.
    In SharePoint 2013, the analytics functionality is a part of the search component. There is an article for troubleshooting SharePoint 2013 Web Analytics, please take a look at:
    Troubleshooting SharePoint 2013 Web Analytics
    http://blog.fpweb.net/troubleshooting-sharepoint-2013-web-analytics/#.U8NyA_kabp4
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Data are not being applied at destination side

    Hi all,
    I have implemented real time streams replication(not archive log based downstream replication).
    source:9.2.0.8.0
    destination:10.2.0.2.0
    Capture and propagation is working fine. DBlinks are also fine. Apply process is running , but data are not being applied in destination side.
    The trc file shows this:
    Dump file /dev1/visdb10/10.2.0/admin/VIS_wbsebdev1/bdump/vis_p001_14628.trc
    Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options
    ORACLE_HOME = /dev1/visdb10/10.2.0
    System name: Linux
    Node name: wbsebdev1
    Release: 2.4.21-32.ELsmp
    Version: #1 SMP Fri Apr 15 21:17:59 EDT 2005
    Machine: i686
    Instance name: VIS
    Redo thread mounted by this instance: 1
    Oracle process number: 21
    Unix process pid: 14628, image: oracle@wbsebdev1 (P001)
    *** SERVICE NAME:(SYS$USERS) 2008-05-29 11:39:26.957
    *** SESSION ID:(388.16) 2008-05-29 11:39:26.957
    The Alertlog file shows at the end this:
    Thu May 29 11:19:06 2008
    Streams APPLY A001 with pid=16, OS id=9531 stopped
    Thu May 29 11:21:25 2008
    Incremental checkpoint up to RBA [0x746.d359.0], current log tail at RBA [0x746.d471.0]
    Thu May 29 11:39:26 2008
    Streams APPLY A001 started with pid=18, OS id=14624
    Streams Apply Reader started P000 with pid=20 OS id=14626
    Streams Apply Server started P001 with pid=21 OS id=14628
    Thu May 29 11:41:33 2008
    Incremental checkpoint up to RBA [0x746.11565.0], current log tail at RBA [0x746.121b9.0]
    Pls help.
    Thanking You,
    Nitesh.

    Problem solved.

  • I am transmitting data over internet and WiFi ,it's working fine with internet but when I choose WiFi for data transmission data is not being transmitted. What may be the possible issues of data transmission failure over WiFi?  Please help me.

    I am transmitting data over internet and WiFi ,it's working fine with Internet but when I choose WiFi for data transmission data is not being transmitted. What may be the possible issues of data transmission failure over WiFi?     Please help me....
    Thanks in Advance.
    Neeraj@iDev

    After a week's worth of debugging, I found the issue.
    The Java type returned from the call was defined as ArrayList.  Changing it to List resolved the problem.
    I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid.  And, why it works in Debug mode and not in Release build is even stranger.  Maybe someone can shed some light on the logic here to me.

  • HT4539 purchased music is not being downloaded to all authorized computers.

    purchased music is not being downloaded to all authorized computers.

    Did you have 'automatic downloads' turned 'on' on those computers when you bought the music ? If not then, if the music is still in the store, you should be able to re-download it on each computer via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page
    Or you can copy the music between your computers : http://support.apple.com/kb/HT4527

  • Facet secondaryToolBar not being executed properly

    Hi Folks,
    I used Goldin's pagination solution, but I am having some issues.
    Paging of large data sets - SOLUTION
    http://vgoldin.blogspot.com/2008/02/myfaces-trinidad-working-with-large.html
    I saw that this is an asynchronous call.
    The search button calls an action event at my Backing Bean that creates a PagedListDataModel.
    The creation does not start a call to the EJB until the af:table needs it.
    After executing the RENDER_RESPONSE (afterPhase), the ADF Table starts to render and call the PagedListDataModel to get the page and print the records (famous Extracting Data... message).
    My table is updated properly and also the total of records is being print in the statusbar facet of my panelCollection that is being used around the table.
    The problem is with secondaryToolBar facet that has two buttons for EXPORT function (EXCEL and PDF). These buttons are not being updated.
    Since it is an async call, I tried to put a partialTarget on the buttons after calling the EJB and getting the list of records without success.
    I also tried to put a partialTrigger on the buttons for both table and panelCollection without success.
    I created a generic (any phase) phase listener in order to check how the things are going and saw that (in this order):
    . All the faces are executed (from RESTORE till RENDER). In the invoke application phase it just call the backing bean method and creates the PagedListDataModel.
    . After all the phases have been executed, the listener takes place and after all needed have been returned, TWO phase (ONLY TWO) are being executed (RESTORE and RENDER).
    Could you please anyone here give me a hand? :-)
    Thanks in advance.
    Ricardo Morais

    Hi,
    Can you please check whether the configuration of material availability check in PS is proper and in place or not. Please check the following sap help link on material's availability check in PS:
    Material Availability Check - Material - SAP Library
    Regards
    Saurabh

  • Data is not being populated in screen field PSPNR after F4 search help.

    Hi expert,
    I have added one field GW_SELECT-PSPNR in existing screen 100, and there are many fields already existing.
    and there are POV for 4 fielda and i added POV for field GW_SELECT-PSPNR.
    PROCESS ON VALUE-REQUEST.
      FIELD gw_select-kostl MODULE determine_kostl.
      FIELD gw_select-aufnr MODULE determine_aufnr.
      FIELD gw_select-matnr MODULE determine_matnr.
      FIELD gw_select-bwart MODULE determine_bwart.
    ***Added by me
      FIELD gw_select-pspnr MODULE determine_pspnr.
    ****end add
    now problem is that the value is not being populated in screen.
    values are coming in field GW_SELECT-PSPNR but in screen its not being populated.
    i tried function module 'DYNP_VALUES_UPDATE' then also its not being populated
    now this module MODULE determine_pspnr has code inside
    MODULE DETERMINE_PSPNR INPUT.
       DATA:w_dynpfields TYPE dynpread,
         i_dynpfields LIKE STANDARD TABLE OF dynpread.
      PERFORM fill_pspnr.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield        = 'PSPNR'
          value_org       = 'S'
        TABLES
          value_tab       = gt_pspnr
         field_tab       = lt_field_tab
          return_tab      = lt_return_tab
        EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
          OTHERS          = 3.
      LOOP AT lt_return_tab INTO ls_return_tab.
        gw_select-pspnr = ls_return_tab-fieldval(12).
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
          EXPORTING
            input  = gw_select-pspnr
          IMPORTING
            output = gw_select-pspnr.
        EXIT.
      ENDLOOP.
      refresh i_dynpfields.
       w_dynpfields-FIELDNAME = 'gw_select-pspnr'.
       w_dynpfields-FIELDVALUE = gw_select-pspnr.
       APPEND w_dynpfields to i_dynpfields.
       APPEND gw_select to gt_select.
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          DYNAME                     = sy-repid
          DYNUMB                     = sy-dynnr
        TABLES
          DYNPFIELDS                 = i_dynpfields
       EXCEPTIONS
         INVALID_ABAPWORKAREA       = 1
         INVALID_DYNPROFIELD        = 2
         INVALID_DYNPRONAME         = 3
         INVALID_DYNPRONUMMER       = 4
         INVALID_REQUEST            = 5
         NO_FIELDDESCRIPTION        = 6
         UNDEFIND_ERROR             = 7
         OTHERS                     = 8
    ENDMODULE.                 " DETERMINE_PSPNR  INPUT

    Hi
    Use this code instead of your function call:
        CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
          EXPORTING
            retfield        = 'FEE_NUMBER'
            dynpprog        = sy-cprog
            dynpnr          = sy-dynnr
            dynprofield     = 'FEE'  ================>your field
            value_org       = 'S'
          TABLES
            value_tab       = it_fee
          EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS          = 3.
    Best Regards
    Yossi

  • HTML file is not being shown properly in the JEditorPane

    Hi,
    I am using JEditorPane to display an HTML file from the local disk. This HTML file contains the html tables. Now when this file is getting displayed in the JEditorPane, one top row grid is not being displayed in the editor pane. content of the row is there...but the column grid is missing. All other rows and columns are being shown but the first row-column grid which contains the heading for column.
    Also when I m printing the content of this JEditorPane using Java Print API then no grid is being printed on the paper. content is coming properly but no table grids. when i have taken the print out of the original html file from the browser then table grids are being printed out properly.
    Please do help me out in showing the HTML file in the JEditorPane properly and printing the same.
    Many Thanks,
    gshankar

    Hi,
    JEditorPane renders HTML with many limitations.
    You can use JDIC for the same. refer: jdic.dev.java.net
    But JDIC does not work on windows 98.
    Anand

  • Assign Task - Prepare Data Service not being called?

    Hi,
    I've got an Assign Task activity, with an Action Profile that defines a Prepare Data Service.  For the Prepare data service, I've just created a simple process, and I'm recording it.
    When the assign task gets invoked, the Prepare Data Service process is not being executed.  Nothing gets recorded.
    Do I need to do something else?
    I am running LC ES2 SP2
    Note - If I use a Prepare Data Process on a Task Manager start point, it works fine.  It's just not working for an Assign Task activity.
    Thanks

    Hi
    By default, the checkbox to run the Prepare Data on the User service step is turned off.
    Navigate to the Presentation & Data tab on the User service.
    If you have selected an Action Profile that specifies a Prepare Data process, you'll see 3 checkboxes under the section: Specify when the Prepare Data process runs
    Check "The user opens the task" and it will now run the Prepare Data on the User service.
    Note: This is unchecked by default so that any data entered on the startpoint step is not overwritten at the user step.
    It is up to the process designer to save off any data that you do not want overridden when the Prepare Data loads.
    Diana

  • When I download CS5.5 I receive an error message informing me one of the files has not been downloaded properly, but it has?

    I have downloaded CS5.5 three times and whenever I choose the set.up.exe file I receive a message that there is an error in the download and a file was not downloaded properly, but everything has been downloaded and has come through.

    what files (name and extension) have you downloaded and what are their file sizes?

  • Equium A60: DVD-RAM not being recognised properly

    Hiya!
    I have a EA60 and my Mat****a DVD-RAM UJ-820S is being not being recognised by the Notebook properly. When I go into Device Drivers it says the driver has loaded but comes up error code 41. I've reloaded the Driver and the Device and this makes no difference.
    I also bought a new Pioneer DVD-RAM and this comes up with the same error code.
    Anyone out there can help me please?
    [email protected]
    Regards,
    Gary

    You could try this method, maybe it works:
    Start Registry Editor
    Locate the UpperFilters value under the following key in the registry:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    On the Edit menu, click Delete, and then click OK.
    Locate the LowerFilters value under the same key in the registry:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    On the Edit menu, click Delete, and then click OK.
    Quit Registry Editor and restart your system. Now windows should recognize your ODD correctly.

Maybe you are looking for