Data is not coming in RSA3 for LIS Data Source 2LIS_02_S174

Hi BW Experts,
We got one requirement on LIS. I haven't work on LIS previously.
Data Source Name: 2LIS_02_S174, This is activated and able to see in T-Code: OMO2.
First we checked the contents of S174 in SE11 & RSA3 and found 0 Records before filling the Setup Tables.
Then we filled the Setup Tables for S174 and finally got 0 Records in RSA3 as well as in S174 table also after filling the Setup Tables.
I have Given version name : &(A
We dont know, what are the settings we need to do before filling the Setup Tables. But we checked job overview in SM37 and it was taking 120 Sec.
Thanks in advance
Regards
Pinky Reddy

Hi Pinky
Yes, LBWG is the generic T Code for deleting the setup tables of any application area. You need to enter your application area number in LBWG which deletes the content of all the setup tables pertaining to that application area.
Please make sure before performing LBWG that you have activated the extract structure for the particular Datasource in LBWE.
For filling 2LIS_02_S174, use OLI3BW.
Thanks
Nirmit

Similar Messages

  • Problem in report of cats_da data is not coming for one absence type.

    Dear experts,
    For one absence type the data is not coming in the report cats_da. When I check the other absence type the report is showing the data. I dont know where is the problem. Customer is entering data throught PA30  transaction. Kindly help me where is the problem in customization.

    No answers so closed.

  • Data is not coming in internal table

    Hello Abapers,
    Data is not coming in my internal table.
    Plz tell me where I m wrong
    SELECTION-SCREEN BEGIN OF  BLOCK blk.
    PARAMETERS:       compcode LIKE vbrk-bukrs OBLIGATORY.
    PARAMETERS:       billtype LIKE vbrk-fkart OBLIGATORY.
    SELECT-OPTIONS:   billdate FOR  vbrk-fkdat OBLIGATORY.
    PARAMETERS :      acgrpc   LIKE vbrk-ktgrd OBLIGATORY.
    PARAMETERS:       acgrpm   LIKE vbrp-ktgrm OBLIGATORY.
    PARAMETERS:       taxcode  LIKE konv-mwsk1 OBLIGATORY.
    SELECT-OPTIONS:   plant FOR vbrp-werks .
    SELECT-OPTIONS:   bussarea FOR vbrp-gsber .
    SELECTION-SCREEN END OF BLOCK blk.
    START-OF-SELECTION.
    SELECT avbeln afkart aknumv afkdat abelnr aktgrd abukrs axblnr
    amwsbk  bgsber bwerks bktgrm
    FROM ( vbrk AS a INNER JOIN vbrp AS b ON
    avbeln EQ bvbeln  )
    INTO CORRESPONDING FIELDS OF TABLE vbrk_vbrp
    WHERE ( a~fkart EQ billtype )  AND
    ( a~fkdat IN billdate ) AND
    ( a~ktgrd EQ acgrpc ) AND
    ( a~bukrs EQ compcode ) AND
    ( b~gsber EQ bussarea ) and
    ( b~werks EQ plant ) AND
    ( b~ktgrm EQ acgrpm ) .
    Ravi

    Hi,
    write ur query this way :
    SELECT avbeln afkart aknumv afkdat abelnr aktgrd abukrs axblnr amwsbk bgsber bwerks bktgrm
    FROM ( vbrk AS a INNER JOIN vbrp AS b ON
    avbeln EQ bvbeln )
    INTO CORRESPONDING FIELDS OF TABLE vbrk_vbrp
    WHERE ( a~fkart EQ billtype ) AND
    ( a~fkdat IN billdate ) AND
    ( a~ktgrd EQ acgrpc ) AND
    ( a~bukrs EQ compcode ) AND
    ( b~gsber IN bussarea ) and
    ( b~werks IN plant ) AND
    ( b~ktgrm EQ acgrpm ) .
    even plz check then internal table ' vbrk_vbrp ' if they have all the fields of select query and even the order is same as select , since you are using ' into corresponding fields of table ' clause in select statement.
    hope this helps.
    thanx,
    dhanashri.
    Edited by: Dhanashri Pawar on Aug 26, 2008 6:14 AM

  • Nav.attr data is not coming in cube

    Hi guys,
            Nav.attr data is not coming in cube even though there is data in master data tables.

    Hi Ajay,
    In your case for the Nav Attr data to appear firstly load the master data where your Nav Attr resides and then do the apply hier/attr change for that master data.
    Hope this helps.
    Bye
    Dinesh

  • Regarding data is not coming on second page

    hi all,
         I Created one Smartform that is having Two Pages . I Created Two Final Internal Tables for each Page. Data is coming on First Page. I am getting data for second internal table also but data is not coming on second page.  I am using Command Option in main window for triggering of Second Page.
    What was the problem.
    Please suggest.
    Regards
    Reddy

    Hi,
    In the default setting, the next page is the page itself.
    If a page is processed (filled) and processing of the form is not finished yet (if not all texts or data
    are displayed), the system processes another page. The page used as next page can be
    determined statically during the form definition (Next page) or dynamically at runtime (manual
    page break).
    The new page is the static next page. If a new page is called by a manual page break with
    page specification within the main window (dynamic next page), the system processes this
    page.
    This page does not contain a main window and no static next page exists
    In a main window you display text and data, which can cover several pages (flow text). As soon
    as a main window is completely filled with text and data, the system continues displaying the text
    in the main window of the next page. It automatically triggers the page break

  • Data is not coming in pivot table

    Hi,
    i made a request using some measures,month (time) and some other columns but data is not coming when i m working on pivot table though its working in case of table and graph.
    please help me out..
    thanks

    Hi,
    well data is populating in tables and chart in Oracle BI and i also executed the same query in sql server 2005 and got the desired result.
    the reason to show the results into pivot table is -- i want to show the result(measures) with time dimension and some other dimensions so i have to use this pivot table or if u have some other solution please let me know...
    thanks
    Edited by: user629711 on Nov 20, 2008 11:42 PM

  • Resp Person Tab is not coming in CJ20N for a particular project type

    Hi All,
    I am unaware of the standard SAP screen in CJ20N but we have a screen in CJ20n wherein we can assign a person / link a person this particular tab is not coming at all for a particular project type (Resp Person) rather a different tab (cust enhancement) is coming but our problem is we have a mass program which works on BDC and hence if the required screens are not there it fails.
    Can someone please tell me if there is come config i can check/ maintain for this resp person tab so that it starts coming for all project types.
    Regards
    Anmol Pareek

    Hey Sarang,
    Thanks a lot, it was helpful, one more thing though, In Resp Persons tab there is something called Link Employees and my problem is that i have a mass linking program (using BDC) which cannot work if i dont see that screen in my BDC (without changing BDC). The way you have told is in OPUK/ OPUJ check for proj type and see if person responsible is hidden or not. I dont think that is what i am asking because no matter what this person responsible is hidden, but for certain project types Resp Person tab itself is not coming and that is the problem.
    Regards
    anmol

  • Delivery date is not coming properly in PO Printout

    Hi,
    I have a problem in PO Printout that Delivery date is not coming properlyu2026In my PO, there are 5 line items. 
    If the Delivery date of all line items are same like 01.04.2009, then Delivery date should be shown 01.04.2009 in PO printout.. IT IS COMING RIGHT.
    But if the Delivery Date of all line items are different like 01.04.2009, 02.04.2009, 03.04.2009, 04.04.2009 and 05.04.2009. Then Delivery Date should be shown with the each line items in PO print out. THIS IS NOT SHOWING IN MY PO PRINT OUT.
    Please tell me what is the problem. Why not coming Delivery date with each line items???
    Regardsu2026

    currently i dont have SAP installed with this system, so i just suggesting you some thing.
    goto tcode: nace.
    select your output type. check the processing routines. check the smartform and processing routines attached to it. and see how the field is getting populated and what fields are being passed there.

  • Sharepoint List to Telerik Grid, Where data is not coming from database into List.

    SharePoint List to Telerik Grid, Where data is not coming from database into List.
    Here, i have a SharePoint list , where configurable text are stored, using some utility.
    I want to convert that SharePoint list into Telerik grid, with all Editable Option which i have in SharePoint.

    I know little about Telerik Grid, only find following article about Telerik integrate with SharePoint:
    http://www.telerik.com/help/aspnet-ajax/moss-spradlistview_designer_general.html
    a similar question:
    http://www.telerik.com/forums/how-to-bind-to-a-sharepoint-list-using-radgrid
    Thanks,
    Qiao Wei

  • Address and Personal Data is not coming up on Portal ( ESS MSS )

    Folks,
    I am not able to see the Address and Personal Data is not coming up on Portal ( ESS MSS ) . when I click those links just the roadmap with exit button.
    Thanks

    Hi Manish,
                   Check with your system patch level both from ABAP and JAVA in the same Service Pack levels. if they are different then only we will get this type of errors. Even we i have faced the same problem, but solved with the basis help.
                   Have you gone through PA30, there Empl data has to be maintained. Then we can get the Data.
    Regards,
    kishore
    Edited by: kishore kumar on Dec 2, 2008 3:56 PM

  • Error message: User data is not indexed, yet. Index user data first

    Greeting All,
    Each time I try to index a 'Prepared' searchObjectConnector in the cockpit.. I get a message <
    User data is not indexed, yet. Index user data first>. even that I ran the z_ESH_AU_UPLOAD_AUTH_RFC_720 report in R/3 system.. and checked the auth /user data in the admin cockpit.. and it was indexed..
    1.any idea why I keep getting this error
    2.any idea how can I clean the buffer or the message Queu.. my guess this might  be not error but a q message..
    3. any suggestion please
    Thanks

    Hi Areege,
      I noticed that you created an OSS message on this issue. That was a good idea.
    There is an answer for you in OSS from yesterday.
    Kind regards, Klaus

  • Maintenance Order TECO date must not be befor the Permit Issue Date

    Hi Friends,
    I have a genuine requirement like " Maintenance Order TECO date must not be befor the Permit Issue Date ".
    The requirement is System shall issue a message if TECO date is before the Permit issue date.
    Guys pls help me onthis.
    Thanks & Regards,
    krishna

    Krishna,
    What you can do is use a User Exit: IWO10004 Maintenance order: Customer check for order completionand check that the reference date of completion, also you would need the approval date for the assigned permits in Order by using the table "IHSG" or a relevant function module to get the details of the Permit approval date. After you have the permit approval date, you can compare it with the reference date of  completion and if mismatched then generate the relevant error message.
    regards,
    Muhammad Usman Kahoot

  • Master data time dependant attribute in query for several dates

    Hello all,
    I need to create a query to display prices for a material in different periods. 
    The user will enter a period interval.  For each period, they want to know the material price the last day of that period.
    Material price is a time-dependat attribute of material, and I created one formula variable to display it. The problem is the using the key-date of the query only works for a date, but not for severals.
    Is there any other way to do it?
    If not, the only solution I find is to have in the infoprovider the prices that I need, but I don't think this is a good practice.
    Any suggestions?
    Thanks!

    I have just seen something: in fact the created lines are:
    Key1   Compound1   fromdate    todate    attr1      attr2
    0001      L      01.01.1000      01.01.2006          <empty
    so as you can see, the right interval is created but the attributes are not up to date.
    Cheers.
    Cyril.

  • Delimited Org Unit(having end date Current date) are not coming in Bex output.

    HI All ,
    I have problem with BEx query output while using the Org. Unit Time dependent Hierarchy structure. In ECC side some of the Org. Unit nodes were delimited or their end date set to less than current date. Now this hierarchy is loaded to BW on daily basis those Org. Unit also laoded to BW hierarchy and these nodesare not coming up in our query output. Client wants to see these unit data as it important to him.
    Please suggest  .
    Thanks,
    Arvind Venai

    Hi Arvind,
    As per my understanding, the valid to/end date for Hierarchy should be 31.12.9999. May I know what is Valid To in your case?
    Did yo u check the change happend in ECC for hierarchy is reflecting in BW ?
    There mught be some restriction in BEx Query , please check

  • Date format not coming proper after formula

    Hi All,
    I have two time characteristics "Goods Issue date" and "Goods Return date" and One key figure "No. of days elapsed".
    The key figure "number of days elapsed" is being calculated by taking difference of "goods issue date" from "goods return date", but the format for that is not coming proper for example:-
    Goods Issue Date is 21.06.2006
    Goods Return Date is 22.08.2006
    According to formula No. of days elapsed shud be 62
    but it is coming as 04.03.0001.
    Please help as it is a urgent requirement.
    Much Appreciated,
    Sunil Morwal.

    HI,
    Change the data type to number and try it out.
    i think i will solve your problem.
    Cheers,
    viren.

Maybe you are looking for