Data is not getting cleared in BSO cube.

Hi Gurus,
I am facing issue with one of my BSO cubes(Target) which is in transparent partition with the ASO cube(Source). Earlier the data was double the input and when i cleared using maxl script the data is halfed but as per my script values should be zeros. I need the values in the BSO cube to be zeros but not able to make it and the values halfed are present and i tried different ways. Please help me how to resolve this issue.
script used is very simple in this way:
FIX(Account, Year)
Cleardata "Scenario";
ENDFIX
Thanks in Advance.
regards,
902970.

Hi Brian,
Thanks for your quick reply, Actually we load the input to a static scenario and then the data is copied to the relevant scenario(Actual/Forecast) and need this to be cleared.
Scenario Dimension:
Scenario(Label only)
Static Scenario(~)
Plan(~)
Actual Scenario(~)
Forecast Scenario(~)
Thanks,
902970.

Similar Messages

  • Data is not getting loaded in the Cube

    Hi Experts,
    I had a cube to which I created aggregates and then I deleted the data of the cube and made some changes in it and trying to load the data again from PSA.
    But I'm the data is not getting loaded in to it the cube.
    Can anyone tell me do I have to delete the aggregates before I start a fresh data in to my cube. If yes can you tell me how do i delete it and load it again.
    If it is something else please help me resolve my issue.
    Thanks

    Hi,
    Deactivate the aggregates and then load the data from PSA to Cube.
    And then reactivate the aggregates. While reactivating them you can ask to fill them also.
    Regards,
    Anil Kumar Sharma. P

  • Data is not Getting refresh in Dashboard

    Hi I have implemented Xcelsius on the top of SAP BI System.
    I have the following architecture -
    SAP BI Cube --> BO XI 3.1 Universe Based on Cube --> QWaaS on the Universe --> Xcelsius Dashboard on the QWaas.
    When i created a dashboard and run it , it worked fine and showed me data , which is lying in Cube.
    But When the Data get updated in Cube and i again refresh the Dashboard , It still showing me the old data , the Data is not getting refresh in Dashboard .
    what could be the possible casue ?
    Is QWaas always fetch the dat at run time ?
    Thanks

    QaaWS web service call needs to be invoked to get the data updates from the datasource. Xcelsius provides several options to command how frequently web services connections are calle/refreshed ('refresh on load', 'refresh every X seconds' or trigger cells...).
    You should also keep in mind, that, since QaaWS hits datasource each time web service is called, this can bring some performance issues (web service calls WebI server to run corresponding query, which performs a refresh). In order to mitigate this, since XI 3.0, QaaWS features a cache mechanism, that is used to store data results from each query refresh (corresponding to a web service call), in order to serve it again with better efficiency, in case same request is performed during a specific time interval (which typically corresponds to dashboard interactions).
    Cache sessions are sorted according to the user names and prompt values used, cache is emptied after a defauilt duration without any interaction (request from the same session).
    Cache timeout duration is set for each QaaWS query, and can be tuned from QaaWS Designer when modifying/creating the query : go to Advanced... button on first step of query edition wizard, cache lifetime corresponds to timeout value (in seconds) displayed on Advanced parameter panel (default value being set to 60 seconds).
    Cache lifetime may also be an explanation why you do not see data refreshed (if you are with QaaWS XI 3.0 or later).
    Hope that helps,
    David.

  • Data is not updating from DSO to CUBE

    Hi Friends,
    Can any one please Guide me.
    Data is updating upto ODS but not from this lower level ODS to top of the  cube from last  week and displaying error as " Exception condition "DATE_INVALID" raised" .
    How i can proceed to find which date field is getting wrong date or not getting date ..Can any body tell that how we can analize the possibilities in this case to find the error and solution .I need to solve this today,Can any body guide me please.
    BR,
    Venkat

    hi
    check the transformations between dso and cube, and check any inconsistence. if not then follow the link
    http://www.consolut.com/en/s/sap-ides-access/d/s/doc/F-DATE_CONVERT_TO_FACTORYDATE
    this may help you.

  • Vendor Account not getting Cleared.

    Dear All,
    First of all thanks everyone for your support till date.
    I have an issue. When I am trying to clear a vendor account from F-44 its not getting cleared. Its showing a negative balance of Cash discount and is not getting adjusted with any account.
    However when I am processing the open item for the same vendor in FBL1N. The total is 0.
    Can any one suggest how to go ahead and clear this account.
    Thanks & regards
    Om Prakash gupta

    Dear All,
    Any updates on this issue as it has become a serious problem here. There ia an objection from Auditor.
    Kindly Suggest.
    Regards
    OM

  • JSF: Error Message are not getting cleared

    Hi,
    I am facing some problem with error messages in JSF.
    Here is what I am doing
    1. User submits a form, server validates and sends back the error to the client error message added to Faces Context.
    2. User checks the messages, changes the input and submits. assuming everything is correct now.
    3. On server, it validates and writes data to response for download using the following code.
    FacesContext faces = FacesContext.getCurrentInstance();
        HttpServletResponse response = (HttpServletResponse)faces.getExternalContext().getResponse();
        DownloadResponse.sendDownload( response, is, fileName );
        faces.responseComplete();
      }4. It shows the download popup to download the file. The problem here is that error message are not getting cleared off. User can still see the error message on the screen.
    It seems I am missing something in JSF req-response life cycle. Anyone please point out the mistake.

    SudhirMongia wrote:
    4. It shows the download popup to download the file. The problem here is that error message are not getting cleared off. User can still see the error message on the screen. Wrong. The problem is that the view is not rerendered, which makes sense because you are not sending view content to the browser but your file.
    Your real question probably is: how do I cause a file download and still rerender the view afterwards to show the results? To that I myself do not have the answer unfortunately, but I have seen that question come by a few times already, so doing some searches in these forums may yield you an answer.

  • Data is not getting displayed in the report from an Infoset.

    Hi All,
    I am having a report  based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
    While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
    Could anyone please suggest why the data is not getting displayed in the query designer.
    Thanks & Regards,
    A.V.N.Rao

    Hi Ashish,
    I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
    ECharacteristic 0TCAKYFNM does not exist. Check authorizations
    WThere are calculated elements. These results are bracketed [  ]
    and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
    Does this has any impact in QA.
    Thanks & Regards,
    AVN Rao.

  • Data is not getting updated in table using RFC

    Hi Experts,
    In my scenario, I am calling one RFC using RFC receiver channel. After running scenario, channel is showing status that RFC executed successfully. But when I am checking tables in R/3 system, data is not getting updated.
    Moreover , when we tried to execute the RFC manually in R/3 system, that time data uploaded into table successfully.
    Could anybody tell me what would the reason that data not uploading into table when we send it through XI.
    Regards,
    Sari

    HI Sari,
    as you have scenario with RFC receiver.. and as you mentioned that it not updating tables when run through PI but when you execute RFC manually tables got updates.. then following are the options you can check..
    -- if you check RFC communication channel and if everything ok on then.. this means that your RFC is getting triggered successfully..but as you said tables are not updated.. for this you can go to SXMB_MONI and check the log take payload after mapping.. and compare it with the input when you try to execute it manually.. I think the input when you try manually and input to RFC when you try through PI is different and that is causing the Problem.. you will be able to see the difference in input then check.. I think the problem is data and not RFC communication channel..so by using this you will come to know difference
    -- else if possible configure your ID in PI in RFC Receiver and then check and put breakpoint on ABAP side.. so that when PI will hit RFC you will get it in debug mode and able to see what is going wrong..
    Thanks,
    Bhupesh

  • Data is not getting posted to R/3 from CRM

    Hi to All,
    When i am creating sales order in CRM data is not getting replicated to R/3. System is showing that B Doc is created , posted and validated. But here in CRM system outbound queue is generated but in R/3 there is no data in inbound queue.
    Can anybody tell me the reason behind this?
    Regards,
    Anurag

    Hi,
    Could you please check the if the Site-R/3 in SMOEAC has the subscription All Business Transactions (MESG)? If not please create a subscription to the R/3 site.
    If this doesn't work please update the post.
    Hope this helps.
    Thanks,
    Karuna.

  • Data is not getting replicating to the destination db.

    I has set up streams replication on 2 databases running Oracle 10.1.0.2 on windows.
    Steps for setting up one-way replication between two ORACLE databases using streams at schema level followed by the metalink doc
    I entered a few few records in the source db, and the data is not getting replication to the destination db. Could you please guide me as to how do i analyse this problem to reach to the solution
    setps for configuration _ steps followed by metalink doc.
    ==================
    Set up ARCHIVELOG mode.
    Set up the Streams administrator.
    Set initialization parameters.
    Create a database link.
    Set up source and destination queues.
    Set up supplemental logging at the source database.
    Configure the capture process at the source database.
    Configure the propagation process.
    Create the destination table.
    Grant object privileges.
    Set the instantiation system change number (SCN).
    Configure the apply process at the destination database.
    Start the capture and apply processes.
    Section 2 : Create user and grant privileges on both Source and Target
    2.1 Create Streams Administrator :
    connect SYS/password as SYSDBA
    create user STRMADMIN identified by STRMADMIN;
    2.2 Grant the necessary privileges to the Streams Administrator :
    GRANT CONNECT, RESOURCE, AQ_ADMINISTRATOR_ROLE,DBA to STRMADMIN;
    In 10g :
    GRANT CONNECT, RESOURCE, AQ_ADMINISTRATOR_ROLE,DBA to STRMADMIN;
    execute DBMS_STREAMS_AUTH.GRANT_ADMIN_PRIVILEGE('STRMADMIN');
    2.3 Create streams queue :
    connect STRMADMIN/STRMADMIN
    BEGIN
    DBMS_STREAMS_ADM.SET_UP_QUEUE(
    queue_table => 'STREAMS_QUEUE_TABLE',
    queue_name => 'STREAMS_QUEUE',
    queue_user => 'STRMADMIN');
    END;
    Section 3 : Steps to be carried out at the Destination Database PLUTO
    3.1 Add apply rules for the Schema at the destination database :
    BEGIN
    DBMS_STREAMS_ADM.ADD_SCHEMA_RULES(
    schema_name => 'SCOTT',
    streams_type => 'APPLY ',
    streams_name => 'STRMADMIN_APPLY',
    queue_name => 'STRMADMIN.STREAMS_QUEUE',
    include_dml => true,
    include_ddl => true,
    source_database => 'REP2');
    END;
    3.2 Specify an 'APPLY USER' at the destination database:
    This is the user who would apply all DML statements and DDL statements.
    The user specified in the APPLY_USER parameter must have the necessary
    privileges to perform DML and DDL changes on the apply objects.
    BEGIN
    DBMS_APPLY_ADM.ALTER_APPLY(
    apply_name => 'STRMADMIN_APPLY',
    apply_user => 'SCOTT');
    END;
    3.3 Start the Apply process :
    DECLARE
    v_started number;
    BEGIN
    SELECT decode(status, 'ENABLED', 1, 0) INTO v_started
    FROM DBA_APPLY WHERE APPLY_NAME = 'STRMADMIN_APPLY';
    if (v_started = 0) then
    DBMS_APPLY_ADM.START_APPLY(apply_name => 'STRMADMIN_APPLY');
    end if;
    END;
    Section 4 :Steps to be carried out at the Source Database REP2
    4.1 Move LogMiner tables from SYSTEM tablespace:
    By default, all LogMiner tables are created in the SYSTEM tablespace.
    It is a good practice to create an alternate tablespace for the LogMiner
    tables.
    CREATE TABLESPACE LOGMNRTS DATAFILE 'logmnrts.dbf' SIZE 25M AUTOEXTEND ON
    MAXSIZE UNLIMITED;
    BEGIN
    DBMS_LOGMNR_D.SET_TABLESPACE('LOGMNRTS');
    END;
    4.2 Turn on supplemental logging for DEPT and EMPLOYEES table :
    connect SYS/password as SYSDBA
    ALTER TABLE scott.dept ADD SUPPLEMENTAL LOG GROUP dept_pk(deptno) ALWAYS;
    ALTER TABLE scott.EMPLOYEES ADD SUPPLEMENTAL LOG GROUP dep_pk(empno) ALWAYS;
    Note: If the number of tables are more the supplemental logging can be
    set at database level .
    4.3 Create a database link to the destination database :
    connect STRMADMIN/STRMADMIN
    CREATE DATABASE LINK PLUTO connect to
    STRMADMIN identified by STRMADMIN using 'PLUTO';
    Test the database link to be working properly by querying against the
    destination database.
    Eg : select * from global_name@PLUTO;
    4.4 Add capture rules for the schema SCOTT at the source database:
    BEGIN
    DBMS_STREAMS_ADM.ADD_SCHEMA_RULES(
    schema_name => 'SCOTT',
    streams_type => 'CAPTURE',
    streams_name => 'STREAM_CAPTURE',
    queue_name => 'STRMADMIN.STREAMS_QUEUE',
    include_dml => true,
    include_ddl => true,
    source_database => 'REP2');
    END;
    4.5 Add propagation rules for the schema SCOTT at the source database.
    This step will also create a propagation job to the destination database.
    BEGIN
    DBMS_STREAMS_ADM.ADD_SCHEMA_PROPAGATION_RULES(
    schema_name => 'SCOTT',
    streams_name => 'STREAM_PROPAGATE',
    source_queue_name => 'STRMADMIN.STREAMS_QUEUE',
    destination_queue_name => 'STRMADMIN.STREAMS_QUEUE@PLUTO',
    include_dml => true,
    include_ddl => true,
    source_database => 'REP2');
    END;
    Section 5 : Export, import and instantiation of tables from
    Source to Destination Database
    5.1 If the objects are not present in the destination database, perform
    an export of the objects from the source database and import them
    into the destination database
    Export from the Source Database:
    Specify the OBJECT_CONSISTENT=Y clause on the export command.
    By doing this, an export is performed that is consistent for each
    individual object at a particular system change number (SCN).
    exp USERID=SYSTEM/manager@rep2 OWNER=SCOTT FILE=scott.dmp
    LOG=exportTables.log OBJECT_CONSISTENT=Y STATISTICS = NONE
    Import into the Destination Database:
    Specify STREAMS_INSTANTIATION=Y clause in the import command.
    By doing this, the streams metadata is updated with the appropriate
    information in the destination database corresponding to the SCN that
    is recorded in the export file.
    imp USERID=SYSTEM@pluto FULL=Y CONSTRAINTS=Y FILE=scott.dmp IGNORE=Y
    COMMIT=Y LOG=importTables.log STREAMS_INSTANTIATION=Y
    5.2 If the objects are already present in the desination database, there
    are two ways of instanitating the objects at the destination site.
    1. By means of Metadata-only export/import :
    Specify ROWS=N during Export
    Specify IGNORE=Y during Import along with above import parameters.
    2. By Manaually instantiating the objects
    Get the Instantiation SCN at the source database:
    connect STRMADMIN/STRMADMIN@source
    set serveroutput on
    DECLARE
    iscn NUMBER; -- Variable to hold instantiation SCN value
    BEGIN
    iscn := DBMS_FLASHBACK.GET_SYSTEM_CHANGE_NUMBER();
    DBMS_OUTPUT.PUT_LINE ('Instantiation SCN is: ' || iscn);
    END;
    Instantiate the objects at the destination database with
    this SCN value. The SET_TABLE_INSTANTIATION_SCN procedure
    controls which LCRs for a table are to be applied by the
    apply process. If the commit SCN of an LCR from the source
    database is less than or equal to this instantiation SCN,
    then the apply process discards the LCR. Else, the apply
    process applies the LCR.
    connect STRMADMIN/STRMADMIN@destination
    BEGIN
    DBMS_APPLY_ADM.SET_SCHEMA_INSTANTIATION_SCN(
    SOURCE_SCHEMA_NAME => 'SCOTT',
    source_database_name => 'REP2',
    instantiation_scn => &iscn );
    END;
    Enter value for iscn:
    <Provide the value of SCN that you got from the source database>
    Note:In 9i, you must instantiate each table individually.
    In 10g recursive=true parameter of DBMS_APPLY_ADM.SET_SCHEMA_INSTANTIATION_SCN
    is used for instantiation...
    Section 6 : Start the Capture process
    begin
    DBMS_CAPTURE_ADM.START_CAPTURE(capture_name => 'STREAM_CAPTURE');
    end;
    /

    same problem, data not replicated.
    its captured,propagated from source,but not applied.
    also no apply errors in DBA_APPLY_ERROR. Looks like the problem is that LCRs propagated from source db do not reach target queue.can i get any help on this?
    queried results are as under:
    1.at source(capture process)
    Capture Session Total
    Process Session Serial Redo Entries LCRs
    Number ID Number State Scanned Enqueued
    CP01 16 7 CAPTURING CHANGES 1010143 72
    2. data propagated from source
    Total Time Executing
    in Seconds Total Events Propagated Total Bytes Propagated
    7 13 6731
    3. Apply at target(nothing is applied)
    Coordinator Session Total Total Total
    Process Session Serial Trans Trans Apply
    Name ID Number State Received Applied Errors
    A001 154 33 APPLYING 0 0 0
    4. At target:(nothing in buffer)
    Total Captured LCRs
    Queue Owner Queue Name LCRs in Memory Spilled LCRs in Buffered Queue
    STRMADMIN STREAMS_QUEUE 0 0 0

  • Data is not getting updated in DB table

    hi all
    i am doing IDOC to jdbc scenario
    i am triggering idoc from R/3 and the data is going into DB table
    sender side:       ZVendorIdoc
    receiver side:
    DT_testVendor
      Table
        tblVendor
          action       UPDATE_INSERT
          access      1:unbounded
            cVendorName 1
            cVendorCode 1
         fromdate    1
         todate      1
          Key
            cVendorName  1
    if i trigger idoc for example vendor 2005,2006 and 2010 data is getting updated in the table
    but again if i trigger idoc for same vendor nos data does not get updated in DB table while message is successfull in moni and RWB both
    plz suggest if any change need to be done to update the data
    Regards
    sandeep sharma

    Hi Ravi
    you are right, vendor no is my key field . problem is when i send data again then it should Update the data but it's not updating the data again
    i did on exp with this : i deleted all the record from the table and then  triggered idoc for vendor 2005 , 2006,2010 after this data is updated in the table i deleted the rows for vendor no 2006 and 2010 and kept the row for vendor 2005
    then i again trigered the idoc for vendor no 2005,2006 and 2010 now this should update and it should insert rows for vendor no 2006 and 2010 but i am surprised its not updating the data
    Thanks
    sandeep

  • Data is not getting posted in ABAP Proxy.

    Hi,
    I am working on File to ABAPProxy scenario. The data is not going to proxy.
    In PI sxmb_moni is status is successfull and in the R3 sxmb_moni the status is successfull. But the data is not getting posted in the tables(ABAPProxy). I had checked the inbound and oubound queues. And with the same input data, abapers cheked their code in Abapproxy, then the table is getting updated. When we trigger from PI, the tables are not getting updated.Please help me.
    Thanks,
    Pragathi.

    Hi,
    The problem may be
    Case 1: Cache is not getting refreshed(Check SXI_CACHE)
    Case 2: The Queue Is blocked (Check SMQ1 & SMQ2)
    Regards,
    Sainath

  • Table PA0045 is getting updated but data is not getting displayed in Infty

    Hi,
             When i save entries for any employee in Infty 0045 , the table pa0045 is getting updated with the record.
              But FOR FEW USERS, who created the record, the data is not getting displayed in one tab of the tabstrip bur rest tabs are filled with data. Its the case with few users only .
    Regards,
    Jyoti

    Check if there is proper data to be shown in the tabstrip.
    EX.. Loan Amount Granted in the Tabstrip Basicdata ...

  • Reg : data is not getting in the output

    hi team,
                 data is not getting in the  output, but it is getting in the debug mode
    REPORT ZSAPP10 .
    *tables : pernr.
    TABLES : PA0001.
    type-pools : slis.
    types : begin of itab,
            pernr type pernr,
            orgeh type orgeh,
            abkrs type abkrs,
            end of itab,
            begin of itab2,
            pernr type pernr,
            vorna type pad_vorna,
            nachn type pad_nachn,
            end of itab2.
    parameter : p_pernr like pa0001-pernr.
    *DATA:  g_cprog  tYPE SY-CPROG.
    data : i_itab1 type table of itab initial size 0,
           i_itab2 type table of itab2 initial size 0.
    data : w_itab type itab,
           w_itab2 type itab2.
    data : t_fieldcat type slis_t_fieldcat_alv,
            w_fieldcat type slis_fieldcat_alv.
    data : t_event type slis_t_event,
            w_event type slis_alv_event.
    data : t_listheader type slis_t_listheader,
           w_listheader type slis_listheader.
    *get pernr.
    w_event-form = 'TOP_OF_PAGE'.
    w_event-form = 'sub1'.
    append w_event to t_event.
    w_listheader-typ = 'H'.
    w_listheader-info = 'this is new top of page'.
    append w_listheader to t_listheader.
    select pernr
           orgeh
           abkrs from pa0001 into table i_itab1 where pernr = p_pernr.
    w_fieldcat-col_pos = 1.
    w_fieldcat-seltext_m = 'personnal no'.
    w_fieldcat-fieldname = 'pernr'.
    w_fieldcat-tabname = 'i_itab1'.
    w_fieldcat-outputlen = '20'.
    append w_fieldcat to t_fieldcat.
    w_fieldcat-col_pos = 2.
    w_fieldcat-seltext_m = 'org. unit'.
    w_fieldcat-tabname = 'i_itab1'.
    w_fieldcat-fieldname = 'orgeh'.
    w_fieldcat-outputlen = '20'.
    append w_fieldcat to t_fieldcat.
    w_fieldcat-col_pos = 3.
    w_fieldcat-seltext_m = 'payroll area'.
    w_fieldcat-tabname = 'i_itab1'.
    w_fieldcat-fieldname = 'abkrs'.
    w_fieldcat-outputlen = '20'.
    append w_fieldcat to t_fieldcat.
    *g_cprog = SY-CPROG.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
               I_INTERFACE_CHECK                 = ' '
               I_BYPASSING_BUFFER                =
               I_BUFFER_ACTIVE                   = ' '
                 I_CALLBACK_PROGRAM                = SY-CPROG
               I_CALLBACK_PF_STATUS_SET          = ' '
               I_CALLBACK_USER_COMMAND           = ' '
               I_CALLBACK_TOP_OF_PAGE            = ' '
               I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
               I_CALLBACK_HTML_END_OF_LIST       = ' '
               I_STRUCTURE_NAME                  =
               I_BACKGROUND_ID                   = ' '
               I_GRID_TITLE                      =
               I_GRID_SETTINGS                   =
               IS_LAYOUT                         =
                 IT_FIELDCAT                       = T_FIELDCAT
               IT_EXCLUDING                      =
               IT_SPECIAL_GROUPS                 =
               IT_SORT                           =
               IT_FILTER                         =
               IS_SEL_HIDE                       =
               I_DEFAULT                         = 'X'
               I_SAVE                            = ' '
               IS_VARIANT                        =
                 IT_EVENTS                         = T_EVENT
               IT_EVENT_EXIT                     =
               IS_PRINT                          =
               IS_REPREP_ID                      =
               I_SCREEN_START_COLUMN             = 0
               I_SCREEN_START_LINE               = 0
               I_SCREEN_END_COLUMN               = 0
               I_SCREEN_END_LINE                 = 0
               IT_ALV_GRAPHICS                   =
               IT_ADD_FIELDCAT                   =
               IT_HYPERLINK                      =
               I_HTML_HEIGHT_TOP                 =
               I_HTML_HEIGHT_END                 =
               IT_EXCEPT_QINFO                   =
             IMPORTING
               E_EXIT_CAUSED_BY_CALLER           =
               ES_EXIT_CAUSED_BY_USER            =
                 TABLES
                 T_OUTTAB                          = I_ITAB1[]
              EXCEPTIONS
                PROGRAM_ERROR                     = 1
                OTHERS                            = 2
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
          FORM sub1                                                     *
    FORM sub1.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          IT_LIST_COMMENTARY       = t_listheader
      I_LOGO                   =
      I_END_OF_LIST_GRID       =
    ENDFORM.                                                    " sub1

    write this way...
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
            EXPORTING
            i_callback_program                = w_repid
            is_layout                = wa_layout
            i_callback_user_command  = 'USER_COMMAND_ACCT'
            i_grid_title             = 'Document Status Report'
             it_fieldcat                       = it_fcat[]
         IT_SORT                        = IT_SORT[]
             it_events                = it_events
             TABLES
               t_outtab                        = it_final_data[]
          EXCEPTIONS
            program_error                     = 1
            OTHERS                            = 2.

  • Complete data is not getting downloaded in XL

    We have developed one Z report to take the status of open purchase order for projects. While downloading it to XL (ofiice 2007 installed on PC), complete data is not getting downloaded.
    I would like to know whether it is XL problem or it is some bug in the report itself.
    Pl. help.

    While downloading the data to excel , try the following option
    List -- > Export -- > Spreadsheet -- > Excel(in MHTML Format).
    The download will authormatically open in excel window. Save it as excel file

Maybe you are looking for

  • User defined function in where IN clause

    Hi, I have a Function who returns in priview: (1,2,3,4) Now i am using this function in SQL where clause Select from debug where id in debug.debug_process() On execute select i am getiing ORA-01722 invalid number , i understand that functions return

  • Itunes encountered a problem and needs to close

    Can't launch itunes. Get message "iTunes has encountered a problem and needs to close". Bought ipod for Xmas. Had old laptop that didn't have adequate USB. Finally bought new Dell and installed (Disc was version 5). Downloaded version 6 and haven't b

  • Enumerating members of a Group object

    Is there anything specific you must do to enumerate the �member� attribute of a group Object via JNDI. I am using an instance of ADAM as a test Directory. I can search for Group objects with no problem, but when I process the results/object attribute

  • Regarding Flag type

    Hi , Can you please tell me what should be the tyep of flag?In all standard ABAP programs they have used X and space .But i have a doubt.Cant we use 1 or 0 and whether the Flag can be of type integer in this case?

  • Aperture File Size

    Hello, I've been archiving Aperture to a Time Capsule using Aperture's vault backup. I noticed that on the Time Capsule the file size it 67GB and the file size on my Mac is 57GB. Could some explain why the vault size is larger than the file size on m