Data is not getting displayed after Exception,mysterious cause?

Hi, Good Afternoon all,
I'm Kittu. I have got a peculiar problem(it seems peculiar atleast to me) in my application, i donno whether it is programmatic error or problem with the environment that i'm using.
In my application,I'm using java with NetBeans 5.5.1(Server being Tomcat). Problem is : once I get certain kind of exceptions in 'Bundled Tomcat(log)' window of Netbeans output, all the data and content that generally gets displayed in 'Bundled Tomcat' window of NetBeans output.(Note that these two are different windows) , gets erased and no more displaying is happening. Dont know what must be the problem. Please, if anybody knows the cause of such situation, DO RESPOND. I'll be waiting for your replies.Thanx in advance.
---Kittu.

It's likely what'd confusing you is the way Netbeans automatically switches between tabbed windows in the Output area at the bottom of the window.
There's a variety of windows to look at (especially when running a server), but it only shows one at a time, and will switch to the one with the latest output. To see the window you were previously looking at you'll have to switch back by clicking a tab.

Similar Messages

  • Data is not getting displayed in the report from an Infoset.

    Hi All,
    I am having a report  based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
    While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
    Could anyone please suggest why the data is not getting displayed in the query designer.
    Thanks & Regards,
    A.V.N.Rao

    Hi Ashish,
    I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
    ECharacteristic 0TCAKYFNM does not exist. Check authorizations
    WThere are calculated elements. These results are bracketed [  ]
    and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
    Does this has any impact in QA.
    Thanks & Regards,
    AVN Rao.

  • Table PA0045 is getting updated but data is not getting displayed in Infty

    Hi,
             When i save entries for any employee in Infty 0045 , the table pa0045 is getting updated with the record.
              But FOR FEW USERS, who created the record, the data is not getting displayed in one tab of the tabstrip bur rest tabs are filled with data. Its the case with few users only .
    Regards,
    Jyoti

    Check if there is proper data to be shown in the tabstrip.
    EX.. Loan Amount Granted in the Tabstrip Basicdata ...

  • Screen fields not getting displayed after Line 16

    Hi All,
    There is a screen exit created in IW51, now the new requirment is to add 3 more fields.  I added the fields below the exiting fields, in line number 15 , 16 &17. After executing the Tcode I could find that the field created in line 17 is not getting displayed in runtime. I have increased the screen length. The fields if moved to line numbers below 16 then they are getting displayed. Can anyone help me to find why it is not getting displayed after line 16.

    Hi,
    Can you give me the Enhancement name?
    I searched for the exits using package , but i did not find any screen exists for that IW51 Tcode?

  • Master data is not getting displayed in the Query Designer

    Hi,
    I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
    The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
    I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
    The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
    Hope its clear.
    Please help.
    Thanks

    Hi,
    I have brought the Emp. No. in the Key Field and also have activate the master data again.
    Yet my Query Designer doesn't have the Emp. No.
    I have done a full load for both Master and Transaction.
    Please advice me what the other alternative.
    Thanks

  • Data is not getting displayed in my form

    hi,
    i have declared variable to hold amount in that as v_amt type konv-kwert in my program and in form interface in import parameters i gave it the same as v_amt type konv-kwert..............and in text i gave the variable v_amt.............
    but it is not getting displayed................

    Hi!
    on the application toolbar on the top a icon is there for Field list on/off.
    click on it.
    below left hand side field names will be displayed.
    now from the import parameter drag that parameter and drop it in the text boc where you are to display it.
    try this way.....it can work.....sometimes there is problem when u don't drag and drop the fields from the list box in the text nodes.
    Regards.

  • Master data is not getting displayed in the Report in Quality

    HI Experts,
    I have ZESP_Num as master for my transaction data.
    I have loaded the data in the Development and designed and checked my report. It is working fine.
    But after moving it to Quality. My report is not getting the master data.
    When I try to do right click manage ZESP_Num.
    I'm getting message like this.
    The data from the InfoProvider ZESP_NUM involved could not be checked
    Message no. DBMAN242
    Diagnosis
    A participating InfoProvider is virtual and aggreement between results and selections cannot be guaranteed.
    Can anyone plz help me.
    Thanks

    Hi,
    Please check the SNOTE Note 1364083 u2013 Message text will appear unexpectedly in surface.
    Hope helpful.
    Regards,
    RAO

  • Error in SNC SMI Scenario  - Demand Data is Not Getting Displayed

    Hi All SCM SNC APO Members,
                                                  For SMI scenario I am sending Stock and Demand data from R/3 to SNC(5.1) System. The Stock data(Safety Sotck, Stock on hand etc) is visible in XML messages but demand is not getting updated in Supplier view in SNC.
    What could be the reson behind that and how it will be rectified?
    Please let me know which program and which table/keyfigure is responsible and how can i correct this.
    I am using standard SAP settings.
    Do i need to execute any report to update demand?
    Regards,
    SK

    Hi SK,
    Make the following SPRO settings if it is not there:
    Step 1:          Goto SPRO--->SAP SCM - Implementation Guide -->
                         SCM Basis-->
                         Processing Inbound and Outbound Messages-->
                         Process Types for Inbound Messages-->
                         Determine Default Process Types
                         Checked XML PROACT_I ProductActivityNotification - Inbound should be linked to ICH - Supplier Collaboration.
    Step 2:         Goto SPRO--->SAP SCM - Implementation Guide -->
                        SCM Basis-->
                        Processing Inbound and Outbound Messages-->
                        Process Types for Inbound Messages-->
                        Define Sender- and Recipient-Dependent Process Types
                        Click on new entry enter as follows:
                       XML Message:   PROACT_I ProductActivityNotification
                       Send. System
                       Sender
                       Recipient        : <Supplier_location>
                       Process Type :ICH - Supplier Collaboration
    After above setting you should get Stock and demand in Web UI.
    Regards,
    Nikhil.

  • Data is not getting displayed into a table

    Hi,
    here i used 2 views
    Personal info view :--user fill the details in this and clicks go...Then the user entered details should be displayed into a table view...
    In context of personalinfoView i took a node as "personal" and added the details as attributes to personal node,and while mapping i mapped Controller data with PersonalinfoView...
    No i have to retrive data from controller component and i have to display in table
    But the table is getting displayed but no values are getting displayed..
    the code for getting data from component controller i used in inplug method od table is  
    String tblName=wdThis.wdGetUICompController().wdGetContext().currentPersonalElement().getName();
        if((tblName!=null)&& tblName.equals(""))
              wdContext.currentPersonalElement().setName(tblName);
        String tblFirstName= wdThis.wdGetUICompController().wdGetContext().currentPersonalElement().getFirstName();
         if(tblFirstName!=null && tblFirstName.equals( ""))
              wdContext.currentPersonalElement().setFirstName(tblFirstName);
        String tblEmail=wdThis.wdGetUICompController().wdGetContext().currentPersonalElement().getEmail();
         if(tblEmail!=null && tblEmail.equals(""))
           wdContext.currentPersonalElement().setEmail(tblEmail);
        String tblCountry=wdThis.wdGetUICompController().wdGetContext().currentPersonalElement().getCountry();
        if(tblCountry!=null && tblCountry.equals(""))
            wdContext.currentPersonalElement().setCountry(tblCountry );
        String tblGender=wdThis.wdGetUICompController().wdGetContext().currentPersonalElement().getGender();
        if(tblGender!=null && tblGender.equals(""))
            wdContext.currentPersonalElement().setGender(tblGender);
        String tblSports=wdThis.wdGetUICompController().wdGetContext().currentPersonalElement().getSports();
        if(tblSports!=null && tblSports.equals( ""))
            wdContext.currentPersonalElement().setSports(tblSports );
        String tblOthers=wdThis.wdGetUICompController().wdGetContext().currentPersonalElement().getOtherinterests();
        if(tblOthers!=null && tblOthers.equals(""))
            wdContext.currentPersonalElement().setOtherinterests(tblOthers );

    Hi Padma
    You said you have context structure like this
    Personal
    Name
    Firstname
    Email
    if you set personal node's cardinality 1..1 it can hold only one person's Information.i.e. personal node has only one element.
    if you set the personal node's cardinality 0..n it can hold 0 to N nor of person's data.i.e. personal node has 0 to n elements
    If Personal node has cardinality 0..n and it has 10 elements holding 10 person's data, and you are displaying it in a table control.  If we set the selection property single only one row can be selected at a time. if it is Multi user can select multiple rows from the table.
    Now in your case, there is no need to take cardinality as 0..n. Because you are holding information of one person, so the cardinality is 1..1
    Regards
    Abhimanyu L

  • IdM 8.1 New Labels are not getting displayed after upgrading from 7.1

    We have recently upgraded IdM 7.1 to IdM 8.1 and after upgrading the New Labels as New Navigation Menu's in Admin panel are not getting resolved and
    Appearing following way
    UI_APPR_XML_PROVISIONER_EMPTY_TABLE
    UI_APPR_JAVA_LIST_PROVISIONING_REQUESTS_LABEL
    We have checked these labels are there under WPMessages_en.properties file (under idmcommon.jar) but still they are not getting reflected.
    Any help on this will be appreciated.

    May be your location credentials out of sync.
    Un-register and re-register the locations
    1)Right click the location in the Control Center manager and select Unregister
    2)Right click the location in the Control Center manager and select Register and enter the appropriate credentials.

  • Data is not getting displayed in Management Console.

    Hi Experts,
    I am using BPC 7.5(M) SP04, Web server as IIS 7.0 and database server as SQL Server 2008 in Multi Server environment, Web Server is on Application Server (Windows Server 2008) and database server is on different machine.
    I have configured the ODBC logging as documented in the install guide section : Setting Up ODBC Logging in IIS 7.0 for the Default Web Site and records are there in BPClog table of Appserver database but when I try to see data in Management console it doesn't show any data eg: It doesn't show any data after clicking  "Who's Online" link under WebServer section of management console.
    Do I need to do some more settings for getting the records display in Management Console.
    Please Advice.
    Thanks & Regards,
    Rohit

    Hi Roberto,
    I have gone through the OPS guide but still "Who is Online" link of management console is not showing any data, I tried giving date range in Start date/end date fields and clicked on "Reload" button but it gives error message:
    LOGIN FAILED FOR USER 'NT AUTHORITY\ANONYMOUS LOGON'
    Please Advice.
    Thanks & Regards,
    Rohit

  • Login Page not getting Displayed after 10.1.3 Home Upgrade in R12

    Hi,
    We are performing an Upgrade of 12.0.6 to 12.1.1.
    We have just finished the upgrade of 10.1.3 Home to 10.1.3.4. After the successful completetion of Patchset Installation, as a part of Instance
    Validation , we found that we were not able to get the R12 Login Page displayed.
    On Checking the Apache Logs, The Error Message looked as below:
    [Tue Jun 30 03:08:36 2009] [error] [client 159.182.123.2] [ecid: 1246345716:168.146.11.159:585784:0:2,0] File does not exist:
    /u18/app/HUTLcomn/apps/HUTL_oldtut353/portal/OA_HTML/AppsLocalLogin.jsp
    But AppsLocalLogin.jsp in our environment is located in the correct location
    $OA_HTML
    oldtut353:orapps(app):HUTL:[home/orapps] echo $OA_HTML
    /u18/app/HUTLcomn/webapps/oacore/html
    oldtut353:orapps(app):HUTL:[home/orapps] cd
    $OA_HTML
    oldtut353:orapps(app):HUTL:[u18/app/HUTLcomn/webapps/oacore/html] ls -ltr AppsLocalLogin
    -rw------- 1 orapps dba 4094 Jun 16 02:03 AppsLocalLogin.jsp
    It is reading the AppsLocalLogin.jsp from a non existent Location < INST_TOP>/portal/OA_HTML/AppsLocalLogin.jsp
    I have run the autoconfig successfuly in all the Application Tiers and generated Product JAR Files. But still the Error Exists.
    Please help to resolve this issue.

    Thank You Helios.
    The thread which you had mentioned in your previous reply had the similar issue which i was facing.
    I moved forward with the remaining Pre-Upgrade Tasks, Applied Maintainence Pack and then completed the Post Upgrade Tasks.
    I am very delighted to let you know that my Upgrade from 12.0.6 to 12.1.1 was successful. I got the feeling of GLADIATOR :) when I saw the Login Page appearing for the first
    time after the Upgrade.
    Thank you all for your help and Support.
    Thanks,Varun

  • Custom message is not getting displayed after raising do_not_save

    Hi all,
    In Order_save BADI, based some conditions, we were throwing custom messages.
    FYI., code used,
    CV_OWN_MESSAGE = 'X'.
    MESSAGE 'xxxxxxxxxxxxxx' TYPE 'W' Raising do_not_save.
    After Solman upgrade from 7.0 to 7.1, system is not displaying custom message and
    system throwing message like "The document could not be saved" only after execution of above message statement.
    How can I overwrite this system message.
    Any help would be highly appreciated.
    -Mahi

    Hi,
    Please check the below notes
    1922870 - Raising DO_NOT_SAVE event from ORDER_SAVE BADI cause dump
    1650635 - Work Center: problems when using BAdI ORDER_SAVE
    Rg,
    Karthik

  • In a popup the tree table data is not getting displayed properly

    Hi,
    I have a taskflow which contains a tree table within a panelStetchLayout. Following is the taskflow code :
    <af:panelStretchLayout id="SecurityAdminManageRoles" bottomHeight="0" topHeight="auto" inlineStyle="width:725px;height:400px;">
    <f:facet name="center">
    <af:treeTable value="#{bindings.WebCenterSecurityDCPermission.treeModel}" var="node" expandAllEnabled="true" fetchSize="150" verticalGridVisible="false" horizontalGridVisible="true" columnSelection="none" rowBandingInterval="0" columnStretching="last" contentDelivery="immediate" summary="#{uib_o_w_w_r_WebCenter.SECURITY_PERMISSIONS}" disclosedRowKeys="#{webcenterAdminSecurityBean.disclosedRowKeySet}" inlineStyle="border:none" binding="#{webcenterAdminSecurityBean.rolesTable}" id="tt2" styleClass="AFStretchWidth" autoHeightRows="150">
    <f:facet name="nodeStamp">
    <af:column width="260"
    selected="false" noWrap="false" id="c3">
    <f:facet name="header">
    <af:outputText value="#{uib_o_w_w_r_WebCenter.LABEL_PERMISSIONS}"
    id="ot5"/>
    </f:facet>
    <af:panelGroupLayout id="pgl26">
    <af:forEach items="#{bindings.getRoleHeaders.result}" var="role">
    <af:outputText value="#{role.value}" visible="false" id="ot1"/>
    <af:selectBooleanCheckbox selected="#{node.dataProvider.serviceActions[role.value]}"
    rendered="#{!node.dataProvider.serviceHeader}"
    label="#{null}"
    disabled="#{(node.dataProvider.readOnly and role.seededRole) or node.dataProvider.actionDisabledMap[role.value] == true}"
    simple="true" id="sbc2">
    <f:attribute name="permission" value="#{node}"/>
    </af:selectBooleanCheckbox>
    </af:forEach>
    <af:spacer width="5" id="s2"/>
    <af:outputText value="#{node.name}" noWrap="false" id="ot2"
    inlineStyle="#{node.dataProvider.serviceHeader? 'font-weight:bolder;': ''}"/>
    </af:panelGroupLayout>
    </af:column>
    </f:facet>
    <af:column headerText="#{uib_o_w_w_r_WebCenter.LABEL_DESCRIPTION}" rowHeader="unstyled" noWrap="false" id="c1">
    <af:outputText value="#{node.description}" noWrap="false"
    inlineStyle="color:grey;" id="ot3"/>
    </af:column>
    </af:treeTable>
    </f:facet>
    </af:panelStretchLayout>
    </jsp:root>
    This taskflow is included as a region within another page :
    <af:commandToolbarButton id="cb3"
    shortDesc="#{uib_o_w_w_r_WebCenter.LABEL_EDIT_PERMISSION_HINT}"
    icon="/adf/webcenter/edit_sm_ena.png"
    text="#{uib_o_w_w_r_WebCenter.LABEL_EDIT_PERMISSION}"
    inlineStyle="align:left">
    <af:showPopupBehavior popupId="managePopup"/>
    </af:commandToolbarButton>
    <af:popup id="managePopup" contentDelivery="lazyUncached">
    <af:dialog modal="true" type="cancel"
    title="#{requestContext.formatter[uib_o_w_s_r_Spaces.EDIT_ROLE][pageFlowScope.o_w_wa_spacesRoleBacker1.selectedRole.value == webcenterAdminSecurityBean.spacesUsersRole ? uib_o_w_s_r_Spaces.LABEL_AUTH_USER : pageFlowScope.o_w_wa_spacesRoleBacker1.selectedRole.value]}"
    titleIconSource="/adf/webcenter/empty.png" id="d4">
    <af:region value="#{bindings.editroletaskflow.regionModel}"
    id="r2"/>
    <f:facet name="buttonBar">
    <af:commandButton partialSubmit="true"
    text="#{uib_o_w_w_r_WebCenter.LABEL_SAVE}"
    actionListener="#{o_w_w_i_v_b_webCenterViewUtilsBean.saveChangesAndCloseWCLinksPopup}"
    id="cb4">
    <f:attribute value="#{bindings.editroletaskflow.regionModel}"
    name="wcRegionModel"/>
    <f:attribute value="bindings.saveRoles.execute"
    name="wcMethodToExecute"/>
    </af:commandButton>
    </f:facet>
    </af:dialog>
    </af:popup>
    In the main page, there is a table, I select one row and then click on this commandButton, which launches the popup.
    The problem here is that when I launch the popup, there are many rows in the table and hence a scroll bar appears. Scroll down the popup and close the popup.
    Again I launch the popup, I see that the popup displays in the same state as it was closed before, i.e the scrollbar is at the bottom and the first row is not displayed.

    ...also do not forget to:
    1. adjust the Active property for the task flow binding (in the pageDef).
    Set property value to the true on popupFetchListener, and to the false when closing popup
    2. for the af:popup containing region, set childCreation to deffered

  • Data not getting displayed in query

    Hi
    I have master infoobject with keyfigure units as percentage, and data is loaded and working fine.
    data is not getting displayed in query, i am getting the error message, that exception aggregation has to be maintained for 0calday.
    how do i resolve the issue
    Regards

    solved

Maybe you are looking for