Data is not showing in report
hi all,
I have loaded data in cube for budget data keyfig ,i created multiprovider on this cube along with other2 cubes,created report on this multiprovider ,problem is data for the budget column is not comming in th report ?
i have created scratch report on cube which has budget keyfig ,but budget column is not comming for the multiprovider report ?
its very urgent pls waiting for replies?i will assing points
Hi Sneha,
Did you check, whether your cube has got the Budgeted values..
and also check all the key comibinations of the Cube while creating the
multiprovider..
If you are not getting budget value in the cube itself, then you need to check in
PSA, transfer structure as well as in RSA3 .
Hope it helps..
Cheers,
Pattan.
Similar Messages
-
Date not showed when report is viewed in PDF .
Hi,
We have a text field that shows the date on which the report is running.Date is not showed when report is viewed in PDF.But in HTML we can view them . Can any one help me out?
Totally there are four pages for the report.I have observed the PDF driver iin EPM 11.1.2.x is not up-to-date and technically the Date (Text) is there just like in HTML. However, when you increase the View (Zoom in), it eventually does show up.
I have chatted with Oracle Support, and they will not address it with a patch for now. -
Data is not showing up in report on ODS
Hi All,
we have requirment like below
we have an ODS no update rules and nothing with 5 fields . with bex reporting flag checked..
we have function module to fill the data for these 5 fileds in ODS active data table .
So data is there only in active data table that table was filling by using function module.
so i need report that data .when i created and run the report data its not showing up.
Please let me know whats the issues is and how to handle.
I appreciate your help
Regards,
SirishaIn this case you need to use Write-Optimized DSO or if you are in earlier version, then you need to use Transactional ODSinstead of basic DSO.
thanks.
Wond -
Sales Invoice no & date is not showing in J2I6 Report
Hello Experts,
I am running J2I6 report for RG23A PART2 register. In this report Duty like BED, Ecess & HEcess is showing in all case but for credit utilization i.e. sales part INVOICE no & Invoice no is not showing in Report.We have applied Enhancement pack(EHP 3) before some days. Due to this it can be a problem?
Can anyone help me solved the problem.
Regards,
PiyushTry to create the same report manually by adding each column and run the report and then go for another column.
This might narrow down to issue.
or else get the sql query and work on where clause condition first to see the reason.
if helps mark
~ http://cool-bi.com -
Data is not showingh in report
hi experts
in my report , i have taken timein & time out as a key figure while query output data is not showing , it s showing blank , i didn't use any calculate kf r formula ,one think also can i ask , through this i want to calculate a present and absent date for empolyee , can u give me any logic
plz help me
ill assign a point
shaliniHi Shalini,
In the case it would be diff. of intime and out time using fm in the udpate rules..(presuming info object is added into data target)
Hope i am making a point clear.
Hope that helps.
Regards
Mr Kapadia
***Assigning points is the way to say thanks in SDN.*** -
Data is not available in report
Hi Experts,
i have purchase order report created on multiprovider.
Particular vender number data not showing in report but its available in Data target.
suggest possible cusses?Hi Raj
Check if you have any additional restrictions in the report which are filtering out the vendor numbers.
If you are using a master data object make sure the master data is activated.
Also check the assignment for the vendor infoobject in the data target/multiprovider.
Regards,
Ninad -
New Data is not available in reporting after revrse posting
Hello All
I have a cube and data loaded into it.Now i came to know that one request is having wrong data and need to be deleted,without deleting I did reverse posting.Now that particular data(means new data) is not available in reporting.The reporting symbol in request(manage tab) is not available for this request.
Now what should I do,in order to get new data in reporting.
regards
blajisorry i solved it
-
Background: I'm transferring file folders from a Visa laptop via an external hard drive to my IMac. In the folders are photos and videos from different cameras. SO I first tried to import to IMovie but it would not recognize any of the files. So then I imported into IPhoto and both photos and videos were imported and I created events for each folder. When I first opened IMovie I had to wait for it to create "thumb nails". Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events. I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie. I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie.
I'm doing this on three events with about 100 photos and videos. But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie. I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.
Appreciate any tips or pointers.
OBTW this is my first question as a first time Apple owner.It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier! -
After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.
Ok, the issue seem to be solved. The problem was this:
The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
And then LR is reading them and all metadata information has been set / read correctly.
So this is solved. -
Time of email shows in Date Column, Date is not showing on new emails
Date is not showing in Date column. Only time is showing.
I just migrated from OE - Old emails show the time & Date.If these are emails received today that is normal. Thunderbird assumes you know what day it is and only displays the time for messages received today. It will append the date to these messages at midnight tonight.
-
Due date is not showing up in UWL
Hi ,
Due date is not showing up in UWL. Back end is ECC not GP Just regular work flow.
I can see in workflow object end date kind. But the field is blank. For due date any additional configuration needed.
I really appreciate your help.
Regards
MarkHi,
As far as I remember correctly, the Due Date in UWL is the Requested End date in the workflow. So basically you need to open the workflow in backend in WF builder and look at the step. There is a tab for setting different deadlines and stuff. If you do the settings there (for example set the requested end in 3 days), I think that work item will display the due date based on that data.
Regards,
Karri -
BizTalk BAM Data is not showing
In BizTalk 2010, BAM Data is showing correctly.
But in BizTalk 2013, BAM Data is not showing correctly while I am applying the same procedure for both.
Event Log shows not any error.
What I have to check for getting BAM data in 2013 ?
Which configurations should I check ?
Any kind of help would be appreciated.
PrakashPrakash,
There are two parts to it:
Deploying the BAM definitions, which would create the BAM activities and its related DB artifacts.
Deploying the Tracking profile. This step hooks you port/Orchestration/messages to the db artifacts created in step-1.
If you see the BAM tables and its related DB artifacts means BAM definitions has been deployed.
If event log is clean, no data in
TDDS_FailedTrackingData, no data in AllInstances view , you have checked the above suggestions like TDDS means, then it could be the second step which is deploying the tracking
profiles may not have happened properly.
Check the following article for help:
Deploying and Undeploying Tracking Profiles
How to Deploy Tracking Profiles with the Tracking Profiles Management Utility
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
Subreport dropdownlist does not show any report !!
Just finished preparing two reports, rpt1 (Master), rpt2(SubReport), each a separate report works well. after that i added subreport control to rpt1 and went to SubReport properties to add rpt2 ... but ( Use this report as subreport ) did not show
any report in list.Hi,
What happend if you write in the textbox for subreport path, the path, works? what version of Report Builder do you have?
Raymundo Chapa, MCTS http://www.inavant.mx/blog http://projectaserverzone.blogspot.com/ -
0IC_C03 Data Not Showing in Report
Dear Friends,
We are using SAP BW 3.5. I have a problem with 0IC_C03 Cube.
Problem is:
Data is transfered to BW i can see the data from Cube --> Contents.
But when i create a report i am unable to see only that particaluar data which dont
have storage location.
Can anybody help me why its not showing that specific data which dont
have storage location.
and on other hand we can see the data from Cube -->Contents
Regards,
malikYes i am taking care of marker.
all data is ok excep 13 records which have no storage location.
and only these 13 records are not showing in the report and thats why
my stock is not tele with R/3.
Any other hint.
regrds,
Malik -
Data in infoobject not showing in report
Hi,
I have this situation. I can see cost center number in variable screen but the number is not showing when I run the report.
thanksHi,
I would suggest you try to see if the data is being populated in the cube for the particualr infoobject.If it is not populated in the cube itself,then check the filters inthe start routine,transfer & Update Routines. If its populating the data then,try to run the query on the same selection criteria and verfiy.This way you can confirm if its the loading into the dataprovider or on the front end that needs to be fixed.
hope it helps
Maybe you are looking for
-
When trying to open a sent message from the sent directory to the inbox my email froze up in the sent box and appears to be in a continuos loop according to the indicator in the lop left corner.
-
I have 2 iphones, 1 personal and 1 business. I thought I was supposed to have 2 separate itunes accounts. I now have a work ipad and want to only have 1 itunes account that I can use for all 3 devices. How do I cancel 1 account or just combine the
-
Help icon for inputListOfValues in a table
Hi, In our application, we have an inputListOfValues component inside a table. We are using JDev 11.1.1.4.0. We have a requirement to add online help to this component. However, even though the helpTopicID is specified, the icon is not shown anywhere
-
I just tried to import photos form my iPhone 4 to iPhoto...it seemed to get all the way to the end and then iPhoto wasn't responding in the "finishing import" stage. I had already chosen (for the first time ever because I didn't trust it) to delete t
-
Grab Search Help "OK" button as an Action
Hi All, I have an input field with a search help, user is selecting the search help and selecting the value and the value is displaying in the input field. (so far so good, everything is working fine) Question: I want to select the value and once the