Data is not showing up in report on ODS

Hi All,
we have requirment like below
we have an ODS  no update rules and nothing with 5 fields . with bex reporting flag checked..
we have function module to fill the data for these 5 fileds in  ODS active data table .
So data is there only in active data table that table was filling  by using  function module.
so i need report that data .when i created and run the report data its not showing up.
Please let me know whats the issues is and how to handle.
I appreciate your help
Regards,
Sirisha

In this case you need to use Write-Optimized DSO or if you are in earlier version, then you need to use Transactional ODSinstead of basic DSO.
thanks.
Wond

Similar Messages

  • Sales Invoice no & date is not showing in J2I6 Report

    Hello Experts,
    I am running J2I6 report for RG23A PART2 register. In this report Duty like  BED, Ecess & HEcess is showing in all case but for credit utilization i.e. sales part INVOICE no & Invoice no is not showing in Report.We have applied Enhancement pack(EHP 3) before some days. Due to this it can be a problem?
    Can anyone help me solved the problem.
    Regards,
    Piyush

    Try to create the same report manually by adding each column and run the report and then go for another column.
    This might narrow down to issue.
    or else get the sql query and work on where clause condition first to see the reason.
    if helps mark
    ~ http://cool-bi.com

  • Plan Data Does Not Show in FI Report

    I am using 6.0 with New GL and Functional Area standard Report S_PL0_86000029.  I added cost center plan data using KP06 and that info shows fine in std report for cost centers (S_ALR_87013611), but does not appear in the aforementioned FI based report.  Is there some transfer transaction I am missing? 
    Thanks
    David

    I resolved my problem by creating a new GRR1 report using the New GL (FAGLFLEXT) table.  This report brings in all of the primary cost element postings as well as the secondary overhead postings.  This provides a much more holistic view of FICO reporting.  I used Functional Areas in order to break out the income statement into typical sections, including one for Net Order Consumption.  This special section for orders should be zero if everything is settled to either WIP or variances.  Otherwise I see a order related settlement problem on the face of the income statement.  I found there was a slight problem with the secondary postings between the cost center and order.  I used substitution rules to force the order postings to have one functional area while the cost centers provided the other side.
    Once I haad the actual postings working, the next problem was that no plan data was coming to the report.  I had to work through many details to finally get the plan data to come through, but now it works as designed.
    Juggler

  • Loaded data is not yet visible in Reporting (see long text) Message no. RSM

    Hi All,
    I have one issue in BI part of Solman. For one of the scenario of Solution Manager uses its own BI component (BI_CONT 7.03 SP08 SAP_BW 700 SP15).
    There is one background job which has to update the data in one of the infocube 0SMD_PE2D. This job is getting failed for the past 2 months.
    When i check the logs of that background job, it shows the long text as below.
    Loaded data is not yet visible in Reporting (see long text)
    Message no. RSM1130
    Diagnosis
    There is an inconsistency between the load status of the data and the option of reporting on this data.
    There is data in the InfoProvider that is OK from a quality point of view, but is not yet displayed in reporting.
    The problem, for example, is to do with request 0000000494, number APO_R4CEHVODV7XS7MRL741GSMV9UB.
    Procedure
    Choose Refresh to remove the inconsistency.
    I went to RSA1 and selected that cube and choose "Execution changes - Manage". On the right hand side under request tab page it shows all the requests with request status as Green.  In Monitor there is No Data Available
    I found a similar thread [Loaded data is not yet visible in Reporting for Data Mart destination cub; unfortunately solution is not updated.
    Could any one help me
    regards
    Naveen

    Hi Aduri,
    In LISTCUBE i am getting the following error
    SQL Error 0
    Unknown error in SQL interface
    System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE 
    Source system is Solution Manager only, production client and BI by default its running in 001 client. We dont have any APO system in our landscape.
    Kindly advice
    Regards
    Naveen

  • Loaded data is not yet visible in Reporting (see long text)

    hello
    all
    I have the next problem : in transaction RSA1, with infocube 0SD_C03 (Sales: Overview) click right/option/manage. appear the next message "Loaded data is not yet visible in Reporting (see long text)", when execute the rollup, show the next message : "Request 'REQU_48QRSOY3PVEJYDCO1B9II221D(    23393)' in DTA '0SD_C03' locked against Qualok using real-time Planning
    as I solve this problem ?

    Jurado,
    What is the frequency of your real time load? was it loading when you query the cube? Have you checked the status of the load? Yellow, if Yellow and if the load is completed Change the technical status to Green and you should be able to see the data. Are you sure your query restriction (if any) satisfies the data?
    Probably if you look closely you would know the answer.
    Goodluck,
    Alex
    (Arthur Samson)

  • Option claims from CRM are not showing in BW report.

    Hi All,
    We are having a problem with BW report. The report shows all the claims thatt are created in CRM system( spource sys- CRM). We notices that claims that are called as option claims are not showing in BW report, but they are present in BW. I have checked filters in report design. no filters exist. Where they are getting filtered out. Please help me.
    Haaris..

    Hi,
    I am giving you ore information on the above issue, the above query is running on an infoset, I realized, data is missing from infoset. Where as the data is present in DSO.
    The other thing I can see every other claim in BW, but I cannot see Option claim which are very less compared to other claims.
    The infoset has four DSOs and one characteristic as components.
    Please let me know if you get any idea?
    Haaris.

  • In IPhoto I changed movie dates after thumb nails were created in IMovie but the new dates are not showing up in IMovie.  Is there someway to refresh the IPhoto event in IMovie?

    Background:  I'm transferring file folders from a Visa laptop via an external hard drive to my IMac.  In the folders are photos and videos from different cameras.  SO I first tried to import to IMovie but it would not recognize any of the files.  So then I imported into IPhoto and both photos and videos were imported and I created events for each folder.  When I first opened IMovie I had to wait for it to create "thumb nails".  Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events.  I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie.    I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie. 
    I'm doing this on three events with about 100 photos and videos.  But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie.   I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.  
    Appreciate any tips or pointers.
    OBTW this is my first question as a first time Apple owner. 

    It was suggested I move this question to IPhoto or IMovie which I did. 
    Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
    I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

  • After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    Ok, the issue seem to be solved. The problem was this:
    The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
    By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
    And then LR is reading them and all metadata information has been set / read correctly.
    So this is solved.

  • Time of email shows in Date Column, Date is not showing on new emails

    Date is not showing in Date column. Only time is showing.
    I just migrated from OE - Old emails show the time & Date.

    If these are emails received today that is normal. Thunderbird assumes you know what day it is and only displays the time for messages received today. It will append the date to these messages at midnight tonight.

  • Due date is not showing up in UWL

    Hi ,
    Due date is not showing up in UWL. Back end is ECC not GP Just regular work flow.
    I can see in workflow object end date kind. But the field is blank. For due date any additional configuration needed.
    I really appreciate your help.
    Regards
    Mark

    Hi,
    As far as I remember correctly, the Due Date in UWL is the Requested End date in the workflow. So basically you need to open the workflow in backend in WF builder and look at the step. There is a tab for setting different deadlines and stuff. If you do the settings there (for example set the requested end in 3 days), I think that work item will display the due date based on that data.
    Regards,
    Karri

  • Safari 6.0.1 not showing in System Report (installations)

    I have noticed that Safari 6.0.1 is not showing in System Report (installations) only the previous Safari 5.1.7 - Anyone know why this should be so? Now in Mountain Lion we do not have the update info in Software Update as before; only by going to "About this Mac". Any help appreciated!

    Now in Mountain Lion we do not have the update info in Software Update
    If you click your Apple menu icon you should see Software Update from the drop down menu.
    Clicking Software Update should open the App Store for you.

  • BizTalk BAM Data is not showing

    In BizTalk 2010,  BAM Data is showing correctly.
    But in BizTalk 2013, BAM Data is not showing correctly while I am applying the same procedure for both.
    Event Log shows not any error.
    What I have to check for getting BAM data in 2013 ?
    Which configurations should I check ?
    Any kind of help would be appreciated.
    Prakash

    Prakash,
    There are two parts to it:
    Deploying the BAM definitions, which would create the BAM activities and its related DB artifacts.
    Deploying the Tracking profile. This step hooks you port/Orchestration/messages to the db artifacts created in step-1.
    If you see the BAM tables and its related DB artifacts means BAM definitions has been deployed.
    If event log is clean, no data in
    TDDS_FailedTrackingData, no data in AllInstances view , you have checked the above suggestions like TDDS means, then it could be the second step  which is deploying the tracking
    profiles may not have happened properly.
    Check the following article for help:
    Deploying and Undeploying Tracking Profiles
    How to Deploy Tracking Profiles with the Tracking Profiles Management Utility
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Data not showing up on report

    Hi
    I have an Infocube that has data (ready for reporting) loaded from APO Livecache.
    I'm running a BEX report that gets data from that cube, and for some reason the value for one Key figure is not showing up.
    It's there in the infocube, but is not showing up on the report. The column for that key figure is just blank.
    What can I check or do to see the value there?
    Thanks!
    Pooja

    Hi
    There are no restrictions or conditions on the KF and it is running on a single Infocube.
    There are non-zero values in the cube.
    The field level authorizations are also fine...
    we used to be able to see the values when we last ran this report 2 weeks back.
    There's a calculated key figure that is a sum of this key figure that's not showing up and another one. It is showing the aggregate value correctly! Eg:
    KF not showing up: Production Planned
    2nd KF : On Hand Stock
    Calculated KF Ending Inventory = Production Planned + On Hand Stock
    Although Production Planned is not showing up in the report, I checked its value in the cube and the Ending Inventory value is summed correctly in the report.

  • Data  is not showing in report

    hi all,
        I have loaded data in cube for budget data keyfig ,i created multiprovider on this cube along with other2 cubes,created report on this multiprovider ,problem is data for the budget column is not comming in th  report ?
        i have created scratch report on cube which has budget keyfig  ,but budget column is not comming for the multiprovider report ?
      its very urgent pls waiting for replies?i will assing points

    Hi Sneha,
    Did you check, whether your cube has got the Budgeted values..
    and also check all the key comibinations of the Cube while creating the
    multiprovider..
    If you are not getting budget value in the cube itself, then you need to check in
    PSA, transfer structure as well as in RSA3 .
    Hope it helps..
    Cheers,
    Pattan.

  • Open request not showing in the report

    Hi,
    We have built a query for planning to show open request. After 50,000 records, the request would be closed in the infoprovider. In the query, Request id is restricted with the most current data variable.
    In Dev, the report shows the open request. But, in production, the report doesn't show the open request. When the Query properties are compared, the difference is the Statistics level is 0 in Dev and 1 in Production.
    Is this an issue? If not, what could be the issue?
    Thanks.

    From OSS note 411725 :
    In all queries, which display data from transactional InfoCubes, characteristic 0REQUID must be included in the filter and variable 0S_RQMRC 'Most current data' must be used. This variable is part of the Business Content.This is required so that the system also includes the data records from open requests.
    use this SAP EXIT variable in glbal filter. 0S_RQTRA (Most Current Data (Transactional InfoCube))..try
    regards,..

Maybe you are looking for