Data is not showing using SE16n T-code even though it is available in table

Hi All,
I am facing a problem .Please do let me know the solution incase if it is known to any one.
There are some customized z-tables which is present in both production and development environment and for each of those development customized tables, the table structure and data are same to that of the production customized table. Now when I am executing any of those z-tables in development server using SE16n (General Table Display), itu2019s showing all the data for corresponding table But when I am browsing the table with any particular selection criteria say by providing the value (range of values) for any particular field, there are two problems arises.
1.For some tables the error message is coming like u201CNo Values Foundu201D even though the same table is showing data for that particular filtering selection criteria which
has been provided.
2.Moreover for some tables the output is coming which is containing only the table structure with column heading, but no row has been fetched from the table.
Eventually this problem is not happening in production environment. The reasons for this problem and any solution to solve the issue are highly appreciable.

Dear Vinod,
The solution which you have given is not working. I have checked the conversion exits going through Se16=>menu=>Settings=>User parameters(F6) and "check conversion exits".
When I am executing the entire ztable ,the data are coming and it is also showing the total no. of entries also but when I am executing the same ztable using any particular value for selection criteria (In either of T-codes either SE16 or SE16n) ,The error message is coming like "No Table Entries Found For Specific Key" and When clicking the button "Number of Entries" it is giving the message "Number of entries which meet the selection criteria" ,Even though the record for the same key value exists and
showing the row when executing without any specific key value.This problem is not present for the SAP system tables.Moreover I don't understand the the process to regenerate SE16 Program ,Please provide the step wise solutions for the issue.
Looking forward for your(or anyone from your team member) support regarding the same.
Thanks & Regards,
Anand Prajapati.

Similar Messages

Droid razr maxx calendar does not show up on gmail calendar even though it says that it has synced?

droid razr maxx calendar does not show up on gmail calendar even though it says that it has synced?

I had this same issue. I solved it finally by downloading the free "official" google calendar disabling the phone calendar app (Google Calendar - Android Apps on Google Play) and disabling the phone calendar. Then you need to choose your gmail account to sync with your calendar app. Now my entries on the phone are showing up on my PC.

Movie rental not showing up in play list even though I confirmed purchase - where did it go?

Movie rental not showing up in play list even though I confirmed purchase - where did it go?

Downloaded films (and those synced from your computer) should be in the Videos app (iTunes on the iPad is just the iTunes store) :

My Ipad Air is not showing in my itunes account, even though I have gone threw all of the steps and my data has downloaded to my device

My Ipad Air is not showing in my itunes account, after I have gone through all the steps and download all my information from my previous ipad

Did you enable the Side Bar?
Select "Show Side Bar" from the "View" menu of iTunes.

Songs are not showing up on my ipod, even though...

So I have a playlist on my ipod with 35 podcasts in it. I manually loaded the podcasts. When I connect to my computer I can see the songs on the ipod and play them on my computer. However, when I turn on my ipod and go to that playlist it is empty. I cannot find the podcasts anywhere (viewing by song or artist does not show them). The files are MP3 and I have the latest iOS. Any help?

In the Event mode use the View ➙ Sort ➙ By Date ➙ Decending menu option. Then the latest imports will be near the top of the Event window (depending on when the photos were taken of course).
Or Control-Click on one of the thumbnails in the Last Import album and select Show Event from the contextual menu:
OT

An swf file does not show up in the website even though you can see it in preview and publish

I created a swf file from a mov file in Adobe Encoder. Thge movie shows up in Muse in both the preview and publish mode.
Does not show up in the webstie. The html file is in the assets foder and the swf file is in the image folder and the space is blank.
When i encoded the .mov file I saved it as FLV. Web 1920 x 1080, 16 x 9 5.4 Mbps is the setting for Flash Web Video when i encoded the file.

To see all the History and Cookie settings, select:
* Tools > Options > Privacy > History: Firefox will: "Use custom settings for history"
* Tools > Options > Privacy > History: [X] "Remember download history"

I have a Ipod touch and recently added new music to my itunes library on my laptop. When I sync with my ipod, the new music does not show up on my ipod even though the sync process seems to be working.

I have an Ipod touch and recently added new music to my Itunes library. When I sync with the library, the new music does not show up on my ipod. The sync process seems to be working and there is still plenty of space on the Ipod for new music so I'm not sure what the problem is!

What happens when you try to sync?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Do you have any Restrictions (Settings>General>Restrictions) set that would prevent syncing those songs?

Skype do not show the caller's name, even though i...

I have a paid account number, and when receiving calls I have to recognize by heart who is calling since Skype only show his phone number and not his name. Please help!

Having MDT display the wizard in case of a error (red/salmon) is by design.
Better to figure out which steps are failing in your task sequence and/or marking the failing steps with "Continue on error" in the Task Sequence Editor. That will suppress errors that are really warnings.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

I'm running Forefox 6.0 and the Password Manager pop up is not showing when entering a password even though I have ticked the box to save passwords in Tools Options

How do I get the pop up asking if I wish Firefox to remember passwords? I have ticked the box in Tools>Options>Security

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
*You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
*To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Deselect: [ ] "Permanent Private Browsing mode"

GPU hardware not being used to export video even though it's selected in project settings

Hi everyone.
I've been using Premier Pro CS6 for a while and have had the GPU Acceleration enabled. It was working fine both in the preview and made things render WAY faster. However, I've recently updated my graphics drivers and while the preview render is playing fine, when I go to actually export and render it, it seems to be using the CPU to render it and thus takes MUCH longer... is there an option somewhere for that or something.
Now some background info.:
I'm using Windows 7 64-bit and I have an NVIDIA GTX 560. I know that wasn't originally supported, but I used a .bat file to add it in. That shouldn't really make a difference though as it was working fine before the driver update.
I am now using the 320.49 driver. Before I was using one from January (can't remember the exact number) If I can't figure anything out then I'll rollback, but there are some other things outside of Premier that could use the update.
Any suggestions or ideas? Thanks.

Well I have one large project I was working on and it almost always takes just about an hour and a half to render it out. Now I do it and all of a sudden it takes 2+ hours to do. I've added nothing to the project. The only thing I changed WAS the driver.
As stated, I'll do the test that Jim suggested and see. I'll also rollback and do the render again. A shame there's no way to use the encoder to render as then I could use a queue... or is there?
Anyhow thanks. I'll post back with my results.

DO NOT show the DEPLOYMENT SUMMARY page even though there are warnings or errors in it when MDT finished

I put SKIPFINALSUMMARY=YES in my cus.ini
But the page still shows at the end of process.
I don't care what's in it,but just make this page hidden automaticly

Having MDT display the wizard in case of a error (red/salmon) is by design.
Better to figure out which steps are failing in your task sequence and/or marking the failing steps with "Continue on error" in the Task Sequence Editor. That will suppress errors that are really warnings.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

Ok, the issue seem to be solved. The problem was this:
The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
And then LR is reading them and all metadata information has been set / read correctly.
So this is solved.

In IPhoto I changed movie dates after thumb nails were created in IMovie but the new dates are not showing up in IMovie. Is there someway to refresh the IPhoto event in IMovie?

Background: I'm transferring file folders from a Visa laptop via an external hard drive to my IMac. In the folders are photos and videos from different cameras. SO I first tried to import to IMovie but it would not recognize any of the files. So then I imported into IPhoto and both photos and videos were imported and I created events for each folder. When I first opened IMovie I had to wait for it to create "thumb nails". Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events. I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie. I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie.
I'm doing this on three events with about 100 photos and videos. But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie. I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.
Appreciate any tips or pointers.
OBTW this is my first question as a first time Apple owner.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

Data is not showing up in report on ODS

Hi All,
we have requirment like below
we have an ODS no update rules and nothing with 5 fields . with bex reporting flag checked..
we have function module to fill the data for these 5 fileds in ODS active data table .
So data is there only in active data table that table was filling by using function module.
so i need report that data .when i created and run the report data its not showing up.
Please let me know whats the issues is and how to handle.
I appreciate your help
Regards,
Sirisha

In this case you need to use Write-Optimized DSO or if you are in earlier version, then you need to use Transactional ODSinstead of basic DSO.
thanks.
Wond

Open delivery not showing in VL06 T.code

Dear Guru,
some of the Open delivey document is not showing in vl06 t.code. what may be the reason.
Regards
Preet

Hi
Which open delivery documents are not shown in VL06? Open delivery order could be those which are created but not yet PGIed or which are PGIed but not yet invoiced. Are you entering relevant values in statuses fields (Billing status, Goods movement statuses etc)?
Thank$

Data is not showing using SE16n T-code even though it is available in table

Similar Messages

Maybe you are looking for