Data is not updating correctly in the cube 0PA_C01

Hi,
I am facing one problem in the Cube 0PA_C01 related to the "Headcount and Personnel Actions" in the HCM module.
I have loaded all the master data and transaction data in the cube and i activate the queries also but when I am executing the queries it is showing me 'No applicable data found' and when I am seeing data in the cube the data is there but only employee field is updating remaining fields are blank and 0 values is there even I activated the master data then also I am facing the same problem.
Please help me out..
Nitesh.

IF is there in infocube, then it is problem with the query, check out filters or variables.

Similar Messages

Recordmode data are not updated correctly

We currently have an issue while using the 3.x data flow in BI 7.0. The same also holds with 3.x versions of BI.
Suppose you have an ODS sending data in an InfoCube. When you initialize the delta process with data transfer then the recordmode field in the communication structure contains null values even though in the change log table of the ODS it has values. This behaviour does not hold when you send further data with deltas.
We want the recordmode data to be updated correctly since we use them in a condition. Does anybody know about this problem?
Best regards
Theodoros

Hi again,
the problem is also not related with any kind of mapping. We are just sending some data from an DSO to an InfoCube. Recordmode values are maintained correctly in the change log table of the DSO. Nevertheless, they are not updated correctly in the InfoCube's update rules communication structure unless we are uploading deltas. My question is why they are not updated also correctly when we are doing an initialization of the delta with data transfer.
Thanks anyway
Theodoros

Data is not updating from DSO to CUBE

Hi Friends,
Can any one please Guide me.
Data is updating upto ODS but not from this lower level ODS to top of the cube from last week and displaying error as " Exception condition "DATE_INVALID" raised" .
How i can proceed to find which date field is getting wrong date or not getting date ..Can any body tell that how we can analize the possibilities in this case to find the error and solution .I need to solve this today,Can any body guide me please.
BR,
Venkat

hi
check the transformations between dso and cube, and check any inconsistence. if not then follow the link
http://www.consolut.com/en/s/sap-ides-access/d/s/doc/F-DATE_CONVERT_TO_FACTORYDATE
this may help you.

Data is not getting loaded in the Cube

Hi Experts,
I had a cube to which I created aggregates and then I deleted the data of the cube and made some changes in it and trying to load the data again from PSA.
But I'm the data is not getting loaded in to it the cube.
Can anyone tell me do I have to delete the aggregates before I start a fresh data in to my cube. If yes can you tell me how do i delete it and load it again.
If it is something else please help me resolve my issue.
Thanks

Hi,
Deactivate the aggregates and then load the data from PSA to Cube.
And then reactivate the aggregates. While reactivating them you can ask to fill them also.
Regards,
Anil Kumar Sharma. P

VT02N's Deadlines are not updating correctly in the background by BDC...

Hi all,
I have this Incoming IDOC that will perform a direct BDC on VT02N.
This BDC will update VT02N deadlines : Shipment and Loadings dates...
However, it comes out error "End Date Precede Start Date"
When I manually put in, it works...
And I have check my BDC coding... its getting and giving the values correctly into VT02N...
Strangely ->
1. If i run the idoc manually and do the BDC screen in the foreground ... VT02N updates correctly
2. If i run the idoc in the background (run by a batch program) ... VT02N gives 'End Date Precede Start Date' error...
Have anyone come across such an error...?
Thanks,
William Wilstroth

Solution : The Handling Date variables that is holding values in the IDOC need to be clear at the end of the IDOC. (Own logic mistake)

Date Dimension not updating correctly

Hi
My current date dimension underlying data was due to expire soon so I set about trying to create a new one.
I got hold of the script that it was based and went about re-creating the data like for like.
I pointed the date dimension at this new data structure and it all processed fine.
When I was doing some testing I noticed althought the total figures were fine, some of the year figures were a little off compared to the underlying data.
I found that dates such as 31/12/2012 were being classified as year 2013. The month was also being classified as January but the date was still showing as 31 December 2012
I switched the date dimension back to the old structure and all year numbers were fine.
I decided to recreate the Date Dimension in the cube using the same structure as the current date dimension and when it processed with the new data structure all the numbers are correct.
I tried clearing cache but I am baffled as to why the new data structure won't work with the existing Date Dimension but will work with a newly created date dimension in the same cube?
Regards

Hi
I seemed to have solved it (although I am still testing), there was a data diffrence in the week key and that it was over lapping with the end of the year so I changed it to match what I already had.
It still doesn't explain that before making the change when I created a new dimension it seemed to work ok.
I had a look at the XML and the only difference that I could see was that the original date dimension had a Time Binding that was generated on the server or the data source.

Multiple days training not updated correctly in the Outlook calendar

Hi Friends,
We have a requirement to integrate training event booking data with the Outlook Calendar. We have achieved it by sending an appointment to outlook by using a standard class CL_APPOINTMENT. All the details are getting updated as needed.
If the training is for a single day then the appointment/invite sent from SAP to Outlook updates the Outlook calendar correctly with the date, time and other details. But if the training consists of several different days, it creates one long calendar reservation instead of one for each planned training day.
For example if the training days are on 15.09.2014, 16.09.2014, 13.10.2014, 14.10.2014 and 28.10.2014, then the outlook calendar reservation is done right from 15.09.2014 to 28.10.2014. instead of only the planned training days (15.09.2014, 16.09.2014, 13.10.2014, 14.10.2014 and 28.10.2014).
So the calendar needs to be updated for that particular day with the particular time.
Please share your expertise if anyone has faced such an issue.
Thanks in advance.
Regards,
Vish

Closing the thread. Custom solution provided.

Data is not updating in DB Table

Hi...All
we have done the RFC-JDBC Synchronous scenario, we are getting the success messages into SXMB_MONI ,in the CCM also it was showing success. but data is not updating in to the Database Table. client want to see the response data in the Database Table only.
pls help me this is very urgent.
Regards,
Pasi.

Hi,
If everything is working fine in XI there is some problem in database end only while query gets executed. Try debuging the sql query which you have by giving log statement and see what the query generated is.
Got to your receiver jdbc communication chalnnel , Advance mode > Additional parameters,
Enter logSQLStatement in the name column and true in the value column
To view the SQL log Click on the message ID of the communication channel monitoring.
or, alternatively, in Runtime workbench, click your message> details> audit log tab.
Run the interface once more. Check the communication channel now. It will show the actual insert statement which is trying to insert into the DB and then you can figure out what is the query being fired to database and see if it is fine.
Copy the same query and run in databse. you will be able to find the exact problem.
thanks
amit
reward point if answer is useful

Deactivation date is not updating in Asset Master after retirement (ABAON)

Dear Experts,
Asset Capitalized on: 28.02.2009 and depreciation key used as: LINK-Str.-line from acq.value to zero without interest. Asset Retirement done with revenue (210) on 31.05.2009. We do have depreciation like (01 book depreciation, 15 Tax depreciation, 30 Local GAAP book depreciation). Below is the asset and class:
Asset name: Maruti Baleno
Asset Class: Vehicles
Here my question is after retirement done with the transaction code: ABAON u201CDeactivation onu201D date is not updating automatically in the system, however when am trying to update manually the system showing error like u201CDeactivation not possible. Dep.area 15 has acquisition values.
When am trying to do same transaction with T code: u201CABAVNu201D, the system updating the deactivation date.
Can anybody explain me why the above error happening and why the deactivation date is not updating with t code: ABAON.
Thanks,
Francis.J

Dear Atif Farooq,
In the AO74 the transaction types (Deactivate fixed asset check box also ticked)
200 Retirement without revenue
210 Retirement with revenue
When am trying to update manually below error appearing in AS02
Deactivation not possible. Dep.area 15 has acquisition values
Message no. AA296
Diagnosis
You cannot deactivate, since acquisition values are still present in depreciation area 15.
Procedure
Deactivation can only be posted by a complete retirement/transfer. The deactivation date is then set automatically.
The above asset procured in the year of 2009 and same has been retired 2009.
Thanks,
Francis J

After editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated

With both my Mac's, reset Photoshop C (2014) to previous version 2014.0. Now find that after editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated. Reloaded camera raw, etc., but still find modification dates are not updated, either using Finder or using Bridge to view dates. Editing other files, PSD, DNG, TIFF, etc., are updated and the information is correctly displayed.

Ok, not entirely sure what I did but it's now working (Bizarre!). The only thing I did was 'eject' the ACR 8.6 .dmg file from the finder side bar and restart PS CC, so that may have been where I was going wrong all along!
However, I now have another issue in that there is no preview of the shot in Finder on my iMac when I highlight the NEF file. I assume this is simply because Apple haven't yet released an update for the new D810 NEF files and so the computer doesn't know what it's looking at?!?
If anyone has any other ideas though, then I'm more than willing to listen.
Thanks again.

Data is not updated in the database

hi.. to all..
i'm using the following code ...... but the data is not updated in the database.. the output window get closed as soon as i clicked save button...
i don't know wat's problem with the program...
Plz help me.. to get resolve this problem..
import java.applet.*;
import java.awt.*;
import java.sql.*;
import java.awt.event.*;
import sun.jdbc.odbc.*;
public class Customerdetails extends Frame implements ActionListener
     TextField ccod,cname,add,phno,conp,email,fax;
     Label l1,l2,l3,l4,l5,l6,l7;
     Button save,exit;
     Connection con;
     ResultSet rs;
     Statement stmt;
     String s1,s2,s3,s4,s5,s6,s7;
public Customerdetails()
    super("CustomerDetails");
    setSize(700,750);
    setLayout(null);
    setBackground(new java.awt.Color(245, 117, 105));
    l1=new Label("Customercode");
    l2=new Label("CompanyName");
    l3=new Label("Address");
    l4=new Label("PhoneNumber");
    l5=new Label("Contact person");
    l6=new Label("EmailAddress");
    l7=new Label("FaxNumber");
    l1.setBounds(20,100,100,70);
    l2.setBounds(20,180,100,70);
    l3.setBounds(20,270,100,70);
    l4.setBounds(20,340,100,70);
    l5.setBounds(20,420,100,70);
    l6.setBounds(20,500,100,70);
    l7.setBounds(20,580,100,70);
    ccod=new TextField();
    cname=new TextField();
    add=new TextField();
    phno=new TextField();
    conp=new TextField();
    email=new TextField();
    fax=new TextField();
    ccod.setBounds(200,120,150,50);
    cname.setBounds(200,200,150,50);
    add.setBounds(200,280,150,50);
    phno.setBounds(200,360,150,50);
    conp.setBounds(200,440,150,50);
    email.setBounds(200,520,150,50);
    fax.setBounds(200,600,150,50);
    Button save= new Button("Save");
    Button exit= new Button("Exit");
    save.setBounds(200,680,100,40);
    exit.setBounds(350,680,100,40);
    add(l1);
    add(ccod);
    add(l2);
    add(cname);
    add(l3);
    add(add);
   add(l4);
   add(phno);
   add(l5);
   add(conp);
   add(l6);
   add(email);
   add(l7);
   add(fax);
   add(save);
   add(exit);
save.addActionListener(this);
exit.addActionListener(this);
setVisible(true);
addWindowListener(new WindowAdapter(){
public void WindowClosing(WindowEvent w) {System.exit(0);}});
public void actionPerformed(ActionEvent ae)
Customerdetails cud= new Customerdetails();
if(ae.getSource()==save)
s1=ccod.getText();
s2=cname.getText();
s3=add.getText();
s4=phno.getText();
s5=conp.getText();
s6=email.getText();
s7=fax.getText();
try
      String query = "insert into Customerdetails (Customercode,CompanyName,Address,PhoneNumber,Contact person,EmailAddress,FaxNumber)"+ "values('"+s1+"','"+s2+"','"+s3+"','"+s4+"','"+s5+"','"+s6+"','"+s7+"')";
      Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
      con=DriverManager.getConnection("jdbc:odbc:prism");
      stmt=con.createStatement();
      rs=stmt.executeQuery(query);
      stmt.close();
catch(ClassNotFoundException e)
System.out.println(e);
catch(SQLException e)
System.out.println(e);
else if(ae.getSource()==exit)
System.exit(0);
else
System.exit(0);
public static void main(String args[])
   Customerdetails cud= new Customerdetails();
}

This doesn't look right:
,FaxNumber)"+ "values(because it's equal to ,FaxNumber)values(and your SQL server won't understand it, put a whitespace between.
/M

HT201070 Since my last update RAW - Files from Nikon D800 are not shown correctly in the Finder as small prewiev. Can anybody help ?

Since my last update to 10.8.4 RAW - Files from Nikon D800 are not shown correctly in the Finder as small prewiev. Can anybody help ?

update 10.8.5 solved this problem. Thankyou anyway.

When we synch data from AD to FIM Portal 2010 r2 the data is not updates in FIM Portal.

Hi,
When we synch data from AD to FIM Portal 2010 r2 the data is not updates in FIM Portal.
Active directory attribute co have value vietnam but in FIM Portal country attribute have value VIET NAM
we simply mapped AD Attribite to FIM Attribute for inbound
co===>country
why this happen
Regards
Anil Kumar

Anil, please check what do you have in metaverse. It seems that you have attribute flow precedence configured in a way that doesn't export to FIM Portal.
Let's say you have flows like:
(AD MA)
Import flow: (AD) description -> (metaverse) description
(FIM MA)
Import flow (FIM) description -> (metaverse) description
Export flow (FIM) description <- (metaverse) description
And you have higher precedence from FIM. Then, you would never have FIM value updated - even if value in AD changes. It would be exported to FIM only when you don't have this attribute filled in FIM.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

I deleted all Apps on iPad as they were associated with an out of date Apple ID and I could not update them, but the "App Store" logo still shows that there are 2 to be updated and when I go there I cannot delete. Please assist. Thanks.

I deleted all Apps on iPad as they were associated with an out of date Apple ID (which I have forgotten the password) and I could not update them, but the "App Store" logo still shows that there are 2 to be updated and when I go there I cannot delete. Please assist. Thanks.

Why don't you explain what happens when you try to delete these two apps that are showing that they need updates. You can only delete them if they are actually installEd on the iPad. Are they on the device?

Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly. The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anyth

Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly. The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anything. I have taken my car to my local dealer but they say the Radiosat is working ok?

Hello there stidhambr15,
I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't quite get the device going again, I recommend restoring the device.
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
iPhone and iPad: How to remove the SIM card
http://support.apple.com/kb/ht5163
iPhone 4 (GSM model)
iPhone 4S
Cheers,
Sterling

Data is not updating correctly in the cube 0PA_C01

Similar Messages

Maybe you are looking for