Data Laoded successfully, giving error while activating the ODS
Hi,
Process Chain is running daily for loading and activating the data into the ODS.
Today the data loaded successfully but the data is not getting activation. I then tried to activate the data manually but still it not trying to get activated.
I check it the Status tab, it is also giving the same Procedure to activate the data manually.
I checked in the Details Tab. It is displaying Errors as :
1. Error getting SID for ODS.
2. Task 0049 for parallel SID assignments terminated with errors.
3. Activation of data records from ODS terminated.
4. System error occured (RFC call)
Please any one help in this issue.
Thanks & Regards
Jagannadha Raju
Hi,
This is probably because you loaded transaction data before master data and tried activating it.Load the relevant master data, perform the change run and retrigger activation.
It should work.
Else there is a workaround. You can try editing out/blanking out those values in PSA and loading and activating. This will work.
Also try repairing the ODS object in RSRV.
When you activate multiple requests tick the activate serially check box.
thanks,
JituK
Similar Messages
-
Error while activating the ODS
Dear Experts,
Please help me out,
I am facing one problem while activating the ODS of 0FIGL. Data is uploaded successfully into the ODS but while activeting the ODS, it gives the following error message :
Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0DOC_HD_TXT
Value 'SWITCH 24 PORT MANAGED -I' (hex. '00530057004900540043004800200032003400200050004F00') of characteristic 0DOC_HD_TXT
SID determination finished for InfoObject 0DOC_HD_TXT
I have also read out all the related post & also applied them in this but still the position is same.
also in RSKC, all the characters are allowed.
please suggest.
Thanks in advance
Neha
Process 000090 returned with errorsHi,
Pliz go thru below article for restricting Invalid chars.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0afbb81-f219-2c10-4181-b20f6b10e373?quicklink=index&overridelayout=true
It might give u an idea or solve your issue.
Thanks,
Jitender. -
Error while activating the ods ( prod.issue)
Hi BW guru's
I am facing major issue while activating the ods i am getting this below error.
<b>Request REQU.....,data package 000002incorrect with status 5
Request REQU.....,data package 000001 incorrect with status 5.</b>
If any1 has come across this issue pls help me out .
I will reward the points surely.
Cheers,
RakeshHi Rakesh
The error message
"Key value exists in duplicate (not allowed by the ODS object type)" in the snap you sent, means you set the ODS for unique records. Thats why its not allowing a second with the same value, which is already in the ODS.
Please check your ODS settings, if 'Unique Data Records' is checked or not.
Sorry for my late response!
Regards
GSK -
Error while activating the ODS (high priority ticket)
Hi BW guru's
I am facing major issue while activating the ods i am getting this below error.
Request REQU.....,data package 000002incorrect with status 5
Request REQU.....,data package 000001 incorrect with status 5.
If any1 has come across this issue pls help me out .
I will reward the points surely.
Cheers,
RakeshHi,
ODS activation error
Re: ODS Activation Failed with Status 5
ODS activation is failing with incorrect with status 5 erro
Re: Error Activating the ODS data
ODS Activation error
Regards,
San! -
DBIF_RSQL_INVALID_RSQL Error while activating the ODS Object
Hello BW Friends,
We have used the Extractor 2LIS_11_VAHDR and enhanced and coded the user exit to extract the data to the required field. Extractor is working fine and able to get the records but when we tried to schedule a data load in BW the request was shown green in the ODS and when saw it in monitor it is still yellow and zero in PSA and the processing hasn't completed. When i tried to activate it manually there is a short dump generated with this error, DBIF_RSQL_INVALID_RSQL. If any one of you has encountered same problem please let us know. Appreciate your prompt response on this.
Regards,
RajeshRaj,
I misunderstood your question.... check whether source system job is processing or not? what about any blocked TRFC'sin SM58.
try to find root cause... ODS activation is not a problem... load is not finished you tried to acivate the request still in the process Yellow.
try to check in Monitor details tab page messages...
All the best.
Regards,
Nagesh Ganisetti.
Message was edited by: Nagesh Ganisetti
Message was edited by: Nagesh Ganisetti -
Error while activating the ODS "Request No longer Exist in ODS".
Hi All,
I had deleted one request from four ODS's before completely loaded from R/3. Now when i am trying to activate from one of them using process chain it is giving me the error massage "Request No longer Exist in ODS".
But when i am manually activating this it is not giving me any error.
Please suggest solution for the same.
Regards,
Rohan ShahI had deleted one request from four ODS's before completely loaded from R/3.
Before deleting the request make QM status red and then delete.
when i am trying to activate from one of them using process chain it is giving me the error massage "Request No longer Exist in ODS".
Already you have deleted the request. How can you activate the same request?
Have you loaded the data again?
With Regards,
Kishore.
Edited by: Siv Kishore on Apr 22, 2009 3:58 PM -
Error Wjile activating the ODS
Hi Gurus,
I am facing an error while activating the ods please find the message shown in the job log .
Request REQU_74JUNZ5CM70EWN1XKSP0W5KWI, data package 000024 incorrect with status 9 in rsodsacstreq
Request REQU_74JUNZ5CM70EWN1XKSP0W5KWI, data package 000025 incorrect with status 9 in rsodsacstreq
Request REQU_74JUNZ5CM70EWN1XKSP0W5KWI, data package 000026 incorrect with status 9 in rsodsacstreq.
Please suggest how to activate the ods,
Regards,
VikramHi Vikram,
Check data in Data Package 24,25 and 26 there is error in some of the data. this u will find Details tab.
Delete the request from the ODS and
then EDIT the data in PSA and load the data in the ODS again.
then Activate it.
Then it wont fail.....prior to these find the records for which the activation is failing....so that u can edit in PSA.
Thanks,
Nagesh. -
Error while activation the Datastore Object
Hi folks,
I am in SAP BASIS, so not aware of BI very much...can u help me in this,
One user is getting error while activation the Datastore Object
below is error log,
(Green) Activation of Objects with Type DataStore Object
(Green) Checking Objects with Type DataStore Object
(Green) Checking DataStore Object DSO_TEST
(Green) DataStore object DSO_TEST is consistent
Table/view /BIC/VDSO_TEST2 (type VIEW) from DataStore object DSO_TEST saved
Change log for DataStore object "DSO_TEST" saved successfully
Writing of object catalog entries (TADIR)
(RED) The creation of the export DataSource failed
(RED) Error during the retrieval of the logon data stored in secure storage
(RED) Error when creating the export DataSource and dependent Objects
(RED) Error when activating DataStore Object DSO_TEST
Thx. in advance
YashHi Yash,
Check out the below thread:
[activation of the Datastore Object.|error in ODS activation/export datasource;
Hope it helps you!
Please reward points if helpful
Manish -
ERROR WHILE ACTIVATING THE DATASOURCE
Hi Experts,
I'M WORKING ON BW3.0B.I'M GETTING ERROR WHILE ACTIVATING THE DATASOURCE
1. EVENT WITH ERRORS EXTRACT IN DATA SOURC 2LIS_11_VAHDRHi,
where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
Thanks
Reddy -
Error while Activating the Standard DSO
Hi,
I am getting the below error while Activating the Standard DSO.
Characteristic 0DPM_DCAS__0CSM_SPRO: DS object 0DPM_DCAS__0CSM_STAT (master data check) does not exist
I tried searching the forum , but didnt find any answer.
Any suggestions are welcome.
Thank you,
Adhvi.Hi,
Are you getting the error while trying to activate the DSO data after loading or just while trying to activate the DSO itself.
If it is during the activation of a request,then please check if you have loaded some data in the DSO which doesnt have the corresponding Master Data loaded.For preventing this, you can check in Infopackage/DTP -"No Update without Master Data".
You can also go into RSRV and perform elementary tests for the DSO and check the SID table consistency.
Thanks,
Divya. -
ERROR while activating the Business Content of Sales Cube 0SD_C03
Hi,
iam facing an error, iam getting the error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB-- objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar. -
Error while activating the function module
hi,
am getting error while activating the function module i.e. program or report statement is missing.
thank you in advance
karthikhii vinu,
hi there....
make sure that the Processing type in Attributes tab is 'Normal function module'. Also chk the general data, it must be having some name in the Program Name and include name column.try checking the program names in se38, if the program is of type include or not. you can also chk by writting a program call the function module and test it
I hope this will solve the query. in my case, SAPLZ123 is the program name and LZ123U28 is the include name.
or
Its common prob with Function module.
Goto SE80->Give Function group name->Right click on it->Activate.
regards,
Shweta -
Run Time error while activating the cube 0pp_c03
Hi All,
I encountered this error while activating the info cube 0pp_c03
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
Regards
RohitHi,
Please check in ST22 for any relevant short dump. the error message is not of much help in anlyzing the problem
or
Perform the consistency test with 'RSRV' -->All Elementary Tests --> Master Data --> 'Compare Number Range and Maximum SID for the characteristic 0REQUID'. and correct the error
Regards,
Marasa. -
Getting error while activating the smart form
hi guys,
i am getting the following run time error while activating the smart-form.
'SQL error in the database when accessing a table'.
can anyone tell why this error is comingRefer to the below link, it may help you to close the thread.
[SQL error in the database when accessing a table|SQL error in the database when accessing a table.;
Regards,
saiRam -
my iphone 4 ios 6.1.3 giving error while activating "activation request could not be completed"
ysreddy112 wrote:
my iphone 4 ios 6.1.3 giving error while activating "activation request could not be completed"
See this discussion.
https://discussions.apple.com/message/21189708
Maybe you are looking for
-
I have been using the phone gap build service and I noticed that the plans page links to the Creative Cloud plans as well (the ? in the top right). I was wondering if I get the photoshop/lightroom plan if I get access to the paid phone gap build serv
-
Custom tab data not saving in ME22N w/ BAdI ME_PROCESS_PO_CUST
Hello all, I have implemented BAdis ME_PROCESS_PO_CUST & ME_GUI_PO_CUST and created a custom tab at the header level in ME21N/ME22N. I have fields such as Delivery Date and Ex Factory Date in my tab. We are able to put data in these fields and have t
-
Can two computers, one USB, other LAN, both use an HP 6310?
Hello, Might be daft question. I have an HP 6310 all in one which I sometimes use (with difficulty, but does work) with Bluetooth and sometimes with USB. This works fine with one computer that was originally set up with the USB option. I now have two
-
SCOM agent install fails Error 80070035 - the network path was not found
I have deployed SCOM 2012 agents to most servers (2008, 2008 R2, 2012, 2012R2) in our estate but some either fail to install or are not monitored. I assume the two problems are related, but for now I am concentrating on the servers that fail complete
-
Could I buy a Mac OSX CD only for VM purpose? Thanks!
I would like to setup Mac OSX on VM using a normal PC (not a Macbook series) Could I do that? or I have to buy a Macbook. Thanks!