Data load eoor , ple solve asap
hi
i am getting this error please let me know solutions
in details tab getting this error also
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Non-updated Idocs found in Business Information Warehouse
Diagnosis
IDocs were found in the ALE inbox for Business Information Warehouse that are not updated.
Processing is overdue.
Error correction:
Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
ple let me know ans
can i goto sm58 and run luw for both r/3 and idoc ?
regards
suneel.
Hi,
In RSMO, select the particular load you want to monitor.
In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
In the next screen you can select the Execute button and the IDOCS will be displayed.
Check Note 561880 - Requests hang because IDocs are not processed.
OR
Transact RFC - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
Hope this helps.
Thanks,
JituK
Similar Messages
-
Data Load error Please respond ASAP
Hi ,
When i am trying to load data for year 07 using rule files its showing an error and aborting the data load
Error Msg " Data Value [2007] Encountered before all dimensions Selected,[5] Records Completed"
Any help greatly appreciated.
ThanksKey here is that 5 records were loaded before failing on the 6th, indicating it's not a header issue on the load rule.
Check the first 5 records and see how the column containing 2007 differs between them and the failing 6th record. Perhaps the 6th record has a null (as indicated eariler) or prehaps 2007 is not the name of the member in the outline.
I have had both issues give similar error results.
J -
Most common BW data load errors in production and how to solve them ..
Hi All,
Most common BW data load errors in production and how to solve them ..
Any doc on it ,if so plz send it across to this id [email protected]
Thanks in advance.
Rgrds
shobahi
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light error message:
Master data/text of characteristic 'so and so' already deleted .
9) extraction job aborted in r3
10) request couldnt be activated because theres another request in the psa with a smaller sid
11) repeat of last delta not possible
12) datasource not replicated
13) datasource/transfer structure not active ´
14) Idoc Or Trfc Error
15. ODS Activation Error -
Ple correct my variables?its great if solve asap
hi friends,how are you, past 2 days i am trying this problem , i am not getting . ple solve my problem
1st query (sender)
Customer quantity
c1 1000
c2 2000
c3 3000
i created variable charracter with user entry/default( customet right click variable)
2nd query (receiver)
Material Customer Sales
m1 c1 100
m2 c2 200
m3 c3 300
now i selected customer selected replacement path is processing type and gave sender query name in this variable.
now i went rsbbs joined 2 queries.
now my doubts is with variable and without variables i am getting same answer.
here how my character with replacement path is effected.
ple correct and solve.Hi Suneel,
On the receiving Query, you need to restrict the customer by the variable value.
The value for the variable will be passed by the first Query....When you "jump to target"..
When you jump from Query1 to Query2....you will get the Materials and the sales amounts
only for the Customer that you selected in Query1.
Good luck, BB -
Data Loading Error for cube 0TCT_C22
Dear Colleagues,
I am working on BI 7.0 / SP09.
I am loading technical content cube 0TCT_C22 from datasource 0TCT_DS22. Till PSA, there is no problem with data load. But from PSA to data target, data load fails. Went to monitor and it shows teh error "Error calling number range object 0TCTPRCSCHN for dimension D2 ( ). Message no: RSAU023".
I tried to find the SAP notes fro this, but no success. Also checked the Dump and application logs, but nothing is there.
Please advice ASAP.
Regards
PSHi Pank,
I just solved the very similar issue. Try what I did to see if it works for you. For each dimension in each Infocube a number range is created. For some weird reason during the activation of the Infocube the number range for the dimension giving troubles was not created. Look for it in TCODE SNRO and you should find a number range per each dimension in the cube but the one giving you error.
To solve it, (the easiest way I found) just add any characteristic to the problematic dimension. Activate the Infocube. After that, modify again you Infocube and remove the characteristic you just added to leave the dimension how you need it. Activate the Infocube again. By doing that you will force the regeneration of the dimension and with it the number range. You can chek in TCODE SNRO and the number range should be there. Try loading your data again and it should work.
One thing I don't understand is why that number range sometimes is not created during activation
Good luck, I hope you can solve it!!!
Regards,
Raimundo Alvarez -
Master Data loading got failed: error "Update mode R is not supported by th
Hello Experts,
I use to load master data for 0Customer_Attr though daily process chain, it was running successfully.
For last 2 days master data loading for 0Customer_Attr got failed and it gives following error message:
"Update mode R is not supported by the extraction API"
Can anyone tell me what is that error for? how to resolve this issue?
Regards,
NiravHi
Update mode R error will come in the below case
You are running a delta (for master data) which afils due to some error. to resolve that error, you make the load red and try to repeat the load.
This time the load will fail with update mode R.
As repeat delta is not supported.
So, now, the only thing you can do is to reinit the delta(as told in above posts) and then you can proceed. The earlier problem has nothing to do with update mode R.
example your fiorst delta failed with replication issue.
only replicating and repeaing will not solve the update mode R.
you will have to do both replication of the data source and re-int for the update mode R.
One more thing I would like to add is.
If the the delat which failed with error the first time(not update mode R), then
you have to do init with data transfer
if it failed without picking any records,
then do init without data transfer.
Hope this helps
Regards
Shilpa
Edited by: Shilpa Vinayak on Oct 14, 2008 12:48 PM -
CALL_FUNCTION_CONFLICT_TYPE Standard Data loading
Hi,
I am facing a data loading problem using Business content on CPS_DATE infocube (0PS_DAT_MLS datasource).
The R/3 extraction processes without any error, but the problem occurs in the update rules while updating the milestone date. Please find hereunder the log from the ST22.
The real weird thing is that the process works perfectly in development environment and not in integration one (the patch levels are strongly the same: BW 3.5 Patch #16).
I apologise for the long message below... this is a part of the system log.
For information the routine_0004 is a standard one.
Thanks a lot in advanced!
Cheers.
CALL_FUNCTION_CONFLICT_TYPE
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Symptoms. Type conflict when calling a function module
Causes Error in ABAP application program.
The current ABAP program "GP420EQ35FHFOCVEBCR6RWPVQBR" had to be terminated because one of the statements could not be executed.
This is probably due to an error in the ABAP program.
A function module was called incorrectly.
Errors analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was neither caught nor passed along using a RAISING clause, in the procedure "ROUTINE_0004"
"(FORM)" .
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated. The reason for the exception is:
The call to the function module "RS_BCT_TIMCONV_PS_CONV" is incorrect:
The function module interface allows you to specify only fields of a particular type under "E_FISCPER".
The field "RESULT" specified here is a different field type.
How to correct the error.
You may able to find an interim solution to the problem in the SAP note system. If you have access to the note system yourself, use the following search criteria:
"CALL_FUNCTION_CONFLICT_TYPE" CX_SY_DYN_CALL_ILLEGAL_TYPEC
"GP420EQ35FHFOCVEBCR6RWPVQBR" or "GP420EQ35FHFOCVEBCR6RWPVQBR"
"ROUTINE_0004"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)". 2. A suitable printout of the system log To obtain this, call the system log through transaction SM21. Limit the time interval to 10 minutes before and 5 minutes after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs, supply the source code.
To do this, select the Editor function "Further Utilities-> Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within the procedure
"ROUTINE_0004"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Environment system SAP Release.............. "640"
Operating system......... "SunOS" Release.................. "5.9"
Hardware type............ "sun4u"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 2
Short dump setting....... "full"
Database type............ "ORACLE"
Database name............ "BWI"
Database owner........... "SAPTB1"
Character set............ "fr"
SAP kernel............... "640"
Created on............... "Jan 15 2006 21:42:36" Created in............... "SunOS 5.8 Generic_108528-16 sun4u"
Database version......... "OCI_920 "
Patch level.............. "109"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version..... "640"
Operating system......... "SunOS 5.8, SunOS 5.9, SunOS 5.10"
SAP Release.............. "640"
The termination occurred in the ABAP program "GP420EQ35FHFOCVEBCR6RWPVQBR" in
"ROUTINE_0004".
The main program was "RSMO1_RSM2 ".
The termination occurred in line 702 of the source code of the (Include)
program "GP420EQ35FHFOCVEBCR6RWPVQBR"
of the source code of program "GP420EQ35FHFOCVEBCR6RWPVQBR" (when calling the editor 7020).
Processing was terminated because the exception "CX_SY_DYN_CALL_ILLEGAL_TYPE" occurred in the procedure "ROUTINE_0004" "(FORM)" but was not handled locally, not declared in the RAISING clause of the procedure.
The procedure is in the program "GP420EQ35FHFOCVEBCR6RWPVQBR ". Its source code starts in line 685 of the (Include) program "GP420EQ35FHFOCVEBCR6RWPVQBR ".
672 'ROUTINE_0003' g_s_is-recno
673 rs_c_false rs_c_false g_s_is-recno
674 changing c_abort.
675 catch cx_foev_error_in_function.
676 perform error_message using 'RSAU' 'E' '510'
677 'ROUTINE_0003' g_s_is-recno
678 rs_c_false rs_c_false g_s_is-recno
679 changing c_abort.
680 endtry.
681 endform.
682 ************************************************************************
683 * routine no.: 0004
684 ************************************************************************
685 form routine_0004
686 changing
687 result type g_s_hashed_cube-FISCPER3
688 returncode like sy-subrc
689 c_t_idocstate type rsarr_t_idocstate
690 c_subrc like sy-subrc
691 c_abort like sy-subrc. "#EC *
692 data:
693 l_t_rsmondata like rsmonview occurs 0 with header line. "#EC *
694
695 try.
696 * init
variables
697 move-corresponding g_s_is to comm_structure.
698
699 * fill the internal table "MONITOR", to make monitor entries
700
701 * result value of the routine
>>>> CALL FUNCTION 'RS_BCT_TIMCONV_PS_CONV'
703 EXPORTING
704 I_TIMNM_FROM = '0CALDAY'
705 I_TIMNM_TO = '0FISCPER'
706 I_TIMVL = COMM_STRUCTURE-CALDAY
707 I_FISCVARNT = gd_fiscvarnt
708 IMPORTING
709 E_FISCPER = RESULT.
710 * if the returncode is not equal zero, the result will not be updated
711 RETURNCODE = 0.
712 * if abort is not equal zero, the update process will be canceled
713 ABORT = 0.
714
715 catch cx_sy_conversion_error
716 cx_sy_arithmetic_error.
717 perform error_message using 'RSAU' 'E' '507'
718 'ROUTINE_0004' g_s_is-recno
719 rs_c_false rs_c_false g_s_is-recno
720 changing c_abort.
721 catch cx_foev_error_in_function.
System zones content
Name Val.
SY-SUBRC 0
SY-INDEX 2
SY-TABIX 0
SY-DBCNT 0
SY-FDPOS 65
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY 0400
SY-UCOMM OK
SY-TITLE Moniteur - Atelier d'administration
SY-MSGTY E
SY-MSGID RSAU
SY-MSGNO 583
SY-MSGV1 BATVC 0000000000
SY-MSGV2 0PROJECT
SY-MSGV3
SY-MSGV4
Selected variables
Nº 23 Tpe FORM
Name ROUTINE_0004
GD_FISCVARNT
22
00 RS_C_INFO I
4
9
COMM_STRUCTURE-CALDAY
20060303
33333333
20060303
SYST-REPID GP420EQ35FHFOCVEBCR6RWPVQBR 4533345334444454445355555452222222222222 704205135686F365232627061220000000000000
RESULT
000
333
00You have an update routine in which youar callin FM 'RS_BCT_TIMCONV_PS_CONV'. Parameter e_fiscper must be the same that type of the variable you use (you can see the data tyoe in FM definition, transaction se37). You should do somethin like the following.
DATA: var type <the same that e_fiscper in FM definition>
CALL FUNCTION 'RS_BCT_TIMCONV_PS_CONV'
EXPORTING
I_TIMNM_FROM = '0CALDAY'
I_TIMNM_TO = '0FISCPER'
I_TIMVL = COMM_STRUCTURE-CALDAY
I_FISCVARNT = gd_fiscvarnt
IMPORTING
E_FISCPER = var.
result = var.
--- ASSIGN POINTS IS USEFUL. -
Dear Experts,
If somebody can help me by the following case, please give me some solution. Iu2019m working in a project BI 7.0 were needed to delete master data for an InfoObject material. The way that I took for this was through tcode u201CS14u201D. After that, I have tried to load again the master data, but the process was broken and the load done to half data.
This it is the error:
Second attempt to write record 'YY99993' to /BIC/PYYYY00006 failed
Message no. RSDMD218
Diagnosis
During the master data update, the master data tables are read to determine which records of the data package that was passed have to be inserted, updated, or modified. Some records are inserted in the master data table by a concurrently running request between reading the tables at the start of package processing and the actual record insertion at the end of package processing.
The master data update tries to overwrite the records inserted by the concurrently running process, but the database record modification returns an unexpected error.
Procedure
u2022 Check if the values of the master data record with the key specified in this message are updated correctly.
u2022 Run the RSRV master data test "Time Overlaps of Load Requests" and enter the current request to analyze which requests are running concurrently and may have affected the master data update process.
u2022 Re-schedule the master data load process to avoid such situations in future.
u2022 Read SAP note 668466 to get more information about master data update scheduling.
Other hand, the SID table in the master data product is empty.
Thanks for you well!
LuisDear Daya,
Thank for your help, but I was applied your suggesting. I sent to OSS with the following details:
We are on BI 7.0 (system ID DXX)
While loading Master Data for infoobject XXXX00001 (main characteristic in our system u2013 like material) we are facing the following error:
Yellow warning u201CSecond attempt to write record u20182.347.263u2019 to BIC/ XXXX00001 was successfulu201D
We are loading the Master data from data source ZD_BW_XXXXXXX (from APO system) through the DTP ZD_BW_XXXXX / XXX130 -> XXXX00001
The Master Data tables (S, P, X) are not updated properly.
The following reparing actions have been taken so far:
1. Delete all related transactional and master data, by checking all relation (tcode SLG1 à RSDMD, MD_DEL)
2. Follow instructions from OSS 632931 (tcode RSRV)
3. Run report RSDMD_CHECKPRG_ALL from tcode SE38 (using both check and repair options).
After deleting all data, the previous tests were ok, but once we load new master data, the same problem appears again, and the report RSDMD_CHECKPRG_ALL gives the following error.
u201CCharacteristic XXXX00001: error fund during this test.u201D
The RSRV check for u201CCompare sizes of P and X and/or Q and Y tables for characteristic XXXX00001u201D is shown below:
Characteristic XXXX00001: Table /BIC/ PXXXX00001, /BIC/ XXXXX00001 are not consistent 351.196 derivation.
It seems that our problem is described in OSS 1143433 (SP13), even if we already are in SP16.
Could somebody please help us, and let us know how to solve the problem?
Thank for all,
Luis -
Material Master Data Loading Error
Hi All,
I am loading master data for material. i got the following error.
1. 0material_attr :
Record 1 :0MATERIAL : Data record 1 ('000000000000010220 '): Version '000000000000010220 ' is not valid
Process : If this message appears during a data load, maintain the attribute in
the PSA maintenance screens. If this message appears in the master data
maintenance screens, leave the transaction and call it again. This
2.0material_text : Data record 1 ('000000000000010220E '): Version '000000000000010220 ' is not valid
Process : Same as above.
I have applied RSKC tcode in BI with ALL_CAPITAL, ALL_CAPITAL_PLUS_HEX, and one special character string. but still getting the same error.
Regards,
Komik ShahHi All,
Thanks for the reply. i have solved most of errors. but there are some errors like this
Diagnosis
Data record 261 & with the key '000000000000132559 &' is invalid in
value '10x8x5 &' of the attribute/characteristic 0SIZE_DIM &.
System Response
The system has recognized that the value mentioned above is invalid, and
has processed this general error message. A subsequent message may give
you more information on the error. This message refers to the same
value, even though it does not state this explicitly.
Procedure
If this message appears during a data load, maintain the attribute in
the PSA maintenance screens. If this message appears in the master data
maintenance screens, leave the transaction and call it again. This allows to maintain your masterdata
which string i should have to add in RSKC to remove this error ? i have already added the ALL_CAPITAL, ALL_CAPITAL_PLUS_HEX.
I have assigned points.
Regards,
Komik Shah -
Error while starting data loading on InfoPackage
Hi everybody,
I'm new at SAP BW and I'm working in the "Step-By-Step: From Data Model to the BI Application in the web" document from SAP.
I'm having a problem at the (Chapter 9 in the item c - Starting Data Load Immediately).
If anyone can help me:
Thanks,
Thiago
Below are the copy of the error from my SAP GUI.
<><><><><><><><><><<><><><><><><><><><><><><><><><><><><><><><>
Runtime Errors MESSAGE_TYPE_X
Date and Time 19.01.2009 14:41:22
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
Batch - Manager for BW Processes ***********
Long text of error message:
Technical information about the message:
Message class....... "RSBATCH"
Number.............. 000
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLRSBATCH" or "LRSBATCHU01"
"RSBATCH_START_PROCESS"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 701
Application server... "sun"
Network address...... "174.16.5.194"
Operating system..... "Windows NT"
Release.............. "5.1"
Hardware type........ "2x Intel 801586"
Character length.... 8 Bits
Pointer length....... 32 Bits
Work process number.. 2
Shortdump setting.... "full"
Database server... "localhost"
Database type..... "ADABAS D"
Database name..... "NSP"
Database user ID.. "SAPNSP"
Terminal.......... "sun"
Char.set.... "English_United State"
SAP kernel....... 701
created (date)... "Jul 16 2008 23:09:09"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQLDBC 7.6.4.014 CL 188347 "
Patch level. 7
Patch text.. " "
Database............. "MaxDB 7.6, MaxDB 7.7"
SAP database version. 701
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 8112
EM...... 11498256
Heap.... 0
Page.... 65536
MM Used. 6229800
MM Free. 1085264
User and Transaction
Client.............. 001
User................ "THIAGO"
Language key........ "E"
Transaction......... "RSA1 "
Transactions ID..... "CD47E6DDD55EF199B4E6001B782D539C"
Program............. "SAPLRSBATCH"
Screen.............. "SAPLRSS1 2500"
Screen line......... 7
Information on where terminated
Termination occurred in the ABAP program "SAPLRSBATCH" - in
"RSBATCH_START_PROCESS".
The main program was "RSAWBN_START ".
In the source code you have the termination point in line 340
of the (Include) program "LRSBATCHU01".
Source Code Extract
Line
SourceCde
310
endif.
311
l_lnr_callstack = l_lnr_callstack - 1.
312
endloop. " at l_t_callstack
313
endif.
314
315
*---- Eintrag für RSBATCHHEADER -
316
l_s_rsbatchheader-batch_id = i_batch_id.
317
call function 'GET_JOB_RUNTIME_INFO'
318
importing
319
jobcount = l_s_rsbatchheader-jobcount
320
jobname = l_s_rsbatchheader-jobname
321
exceptions
322
no_runtime_info = 1
323
others = 2.
324
call function 'TH_SERVER_LIST'
325
tables
326
list = l_t_server
327
exceptions
328
no_server_list = 1
329
others = 2.
330
data: l_myname type msname2.
331
call 'C_SAPGPARAM' id 'NAME' field 'rdisp/myname'
332
id 'VALUE' field l_myname.
333
read table l_t_server with key
334
name = l_myname.
335
if sy-subrc = 0.
336
l_s_rsbatchheader-host = l_t_server-host.
337
l_s_rsbatchheader-server = l_myname.
338
refresh l_t_server.
339
else.
>>>>>
message x000.
341
endif.
342
data: l_wp_index type i.
343
call function 'TH_GET_OWN_WP_NO'
344
importing
345
subrc = l_subrc
346
wp_index = l_wp_index
347
wp_pid = l_s_rsbatchheader-wp_pid.
348
if l_subrc <> 0.
349
message x000.
350
endif.
351
l_s_rsbatchheader-wp_no = l_wp_index.
352
l_s_rsbatchheader-ts_start = l_tstamps.
353
l_s_rsbatchheader-uname = sy-uname.
354
l_s_rsbatchheader-module_name = l_module_name.
355
l_s_rsbatchheader-module_type = l_module_type.
356
l_s_rsbatchheader-pc_variant = i_pc_variant.
357
l_s_rsbatchheader-pc_instance = i_pc_instance.
358
l_s_rsbatchheader-pc_logid = i_pc_logid.
359
l_s_rsbatchheader-pc_callback = i_pc_callback_at_end.Hi,
i am also getting related this issue kindly see this below short dump description.
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
Variant RSPROCESS0000000000705 does not exist
Long text of error message:
Diagnosis
You selected variant 00000000705 for program RSPROCESS.
This variant does not exist.
System Response
Procedure
Correct the entry.
Technical information about the message:
Message class....... "DB"
Number.............. 612
Variable 1.......... "&0000000000705"
Variable 2.......... "RSPROCESS"
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLRSPC_BACKEND" or "LRSPC_BACKENDU05"
"RSPC_PROCESS_FINISH"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 701
Application server... "CMCBIPRD"
Network address...... "192.168.50.12"
Operating system..... "Windows NT"
Release.............. "6.1"
Hardware type........ "16x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "CMCBIPRD"
Database type..... "MSSQL"
Database name..... "BIP"
Database user ID.. "bip"
Terminal.......... "CMCBIPRD"
Char.set.... "C"
SAP kernel....... 701
created (date)... "Sep 9 2012 23:43:54"
create on........ "NT 5.2 3790 Service Pack 2 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 196
Patch text.. " "
Database............. "MSSQL 9.00.2047 or higher"
SAP database version. 701
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0, Windows NT 6.1, Windows NT 6.2"
Memory consumption
Roll.... 16192
EM...... 4189840
Heap.... 0
Page.... 16384
MM Used. 2143680
MM Free. 2043536
User and Transaction
Client.............. 001
User................ "BWREMOTE"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "9C109BE2C9FBF18BBD4BE61F13CE9693"
Program............. "SAPLRSPC_BACKEND"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "BIP"
Database Release.... 701
Kernel Release...... 701
Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "asynchron without reply and transactional (emode 0, imode
0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." "
Information on where terminated
Termination occurred in the ABAP program "SAPLRSPC_BACKEND" - in
"RSPC_PROCESS_FINISH".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 75
of the (Include) program "LRSPC_BACKENDU05".
Source Code Extract
Line SourceCde
45 l_t_info TYPE rs_t_rscedst,
46 l_s_info TYPE rscedst,
47 l_s_mon TYPE rsmonpc,
48 l_synchronous TYPE rs_bool,
49 l_sync_debug TYPE rs_bool,
50 l_eventp TYPE btcevtparm,
51 l_eventno TYPE rspc_eventno,
52 l_t_recipients TYPE rsra_t_recipient,
52 l_t_recipients TYPE rsra_t_recipient,
53 l_s_recipients TYPE rsra_s_recipient,
54 l_sms TYPE rs_bool,
55 l_t_text TYPE rspc_t_text.
56
57 IF i_dump_at_error = rs_c_true.
58 * ==== Dump at error? => Recursive Call catching errors ====
59 CALL FUNCTION 'RSPC_PROCESS_FINISH'
60 EXPORTING
61 i_logid = i_logid
62 i_chain = i_chain
63 i_type = i_type
64 i_variant = i_variant
65 i_instance = i_instance
66 i_state = i_state
67 i_eventno = i_eventno
68 i_hold = i_hold
69 i_job_count = i_job_count
70 i_batchdate = i_batchdate
71 i_batchtime = i_batchtime
72 EXCEPTIONS
73 error_message = 1.
74 IF sy-subrc <> 0.
>>> MESSAGE ID sy-msgid TYPE 'X' NUMBER sy-msgno
76 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
77 ELSE.
78 EXIT.
79 ENDIF.
80 ENDIF.
81 * ==== Cleanup ====
82 COMMIT WORK.
83 * ==== Get Chain ====
84 IF i_chain IS INITIAL.
85 SELECT SINGLE chain_id FROM rspclogchain INTO l_chain
86 WHERE log_id = i_logid.
87 ELSE.
88 l_chain = i_chain.
89 ENDIF.
90 * ==== Lock ====
91 * ---- Lock process ----
92 DO.
93 CALL FUNCTION 'ENQUEUE_ERSPCPROCESS'
94 EXPORTING
If we do this
Use table RSSDLINIT and in OLTPSOURCRE: enter the name of the data source
And in the logsys enter the name of the source system and delete the entry for that info package. what will happen is process chain will run suceesfully and short dump will not come or what kindly give the detail explanation about this RSSDLINIT.
Regards,
poluru -
Error in Setting lock for Master Data Load
Hi Team,
I encounter the following error while uploading the Masterdata
"Lock NOT set for: Loading master data attributes
Attributes of characteristic 0BPARTNER are locked by terminated change run 465451241"
I Performed the following steps
1) Checked if any active jobs (change run jobs) running in the system. But no jobs running.
2) RSATTR->infoobject list-> no infoobject found
3)Tried after sometime ,but load continue to fail
Could anyone help to solve the problem
thanks
BalaHi Bala,
Check in SM12 if there are any locks exist with the change run number?
First check if there are any Master data loads running related to it?
Check in the Attribute change run screen if there are any change run steps are running?
Once after checking the above if no locks exist and no master data is running then check the below steps
1. Run RSA1 transaction
2. Tools -> Apply Hierarchy/Attibutes Change(or direct transaction RSATTR)... menu option
3. Click at "Monitor and Start terminated Change Runs" button (at the bottom of the screen)
4. Click "Reset Status" button at Run ID 465451241
NOTE: this is not recommended, to unlock the locks better to wait till the locks get relased.
If still the error message persists then we can use a FM in se37 in serious cases which was not recommended by SAP...
Use RSDDS_AGGR_MOD_CLOSE in se37 and execute--->there give ur failed change run no(465451241) beside I_CNSID and execute...
It releases all the locks by that change run....and continue with your further work/jobs...
Regards
KP -
Multiple data loads in PSA with write optimized DSO objects
Dear all,
Could someone tell me how to deal with this situation?
We are using write optimized DSO objects in our staging area. These DSO are filled with full loads from a BOB SAP environment.
The content of these DSO u2013objects are deleted before loading, but we would like to keep the data in the PSA for error tracking and solving. This also provides the opportunity to see what are the differences between two data loads.
For the normal operation the most recent package in the PSA should be loaded into these DSO-objects (as normal data staging in BW 3.5 and before) .
As far as we can see, it is not possible to load only the most recent data into the staging layer. This will cause duplicate record errors when there are more data loads in the PSA.
We all ready tried the functionality in the DTP with u201Call new records, but that only loads the oldest data package and is not processing the new PSA loads.
Does any of you have a solution for this?
Thanks in advance.
HaraldHi Ajax,
I did think about this, but it is more a work around. Call me naive but it should be working as it did in BW3.5!
The proposed solution will ask a lot of maintenance afterwards. Beside that you also get a problem with changing PSA id's after the have been changed. If you use the posibility to delete the content of a PSA table via the process chain, it will fail when the datasourcese is changed due to a newly generated PSA table ID.
Regards,
Harald -
Data load problem in Apex 3.2
Hi
Apex 3.2:
Using Utilities>Data Load/Unload I am trying to load spreadsheet data. Despite reducing the data down to the simplest possible example I keep getting all rows rejected with
ORA-00926: missing VALUES keyword
I have tried tab delimited and comma delimited. I can't find any other users hitting this problem, and I have been pleasantly surprised when I lasted used this facility many months ago on 3.1.2 when it worked like a dream.
Any thoughts?
thanks...PROBLEM SOLVED
The schema and the workspace names were in the form:
AAAAAAAAA-AA
I found that data imports worked OK for other workspaces which happened to have simpler naming. I created a new workspace and schema (shorter and without the hyphen) and everything works OK.
I then tried the same with a new schema and tablespace both called TEST-AB and the load failed with the same error
I'm guessing that this is probably a known issue? It would be nice if Apex could reject illegal schema/tablespace names!
I am gratefull for help offered from other replies and hope this observation will help others... -
Data Load Issue "Request is in obsolete version of DataSource"
Hello,
I am getting a very strange data load issue in production, I am able to load the data upto PSA, but when I am running the DTP to load the data into 0EMPLOYEE ( Master data Object) getting bellow msg
Request REQU_1IGEUD6M8EZH8V65JTENZGQHD not extracted; request is in obsolete version of DataSource
The request REQU_1IGEUD6M8EZH8V65JTENZGQHD was loaded into the PSA table when the DataSource had a different structure to the current one. Incompatible changes have been made to the DataSource since then and the request cannot be extracted with the DTP anymore.
I have taken the follwoing action
1. Replicated the data source
2. Deleted all request from PSA
2. Activated the data source using (RSDS_DATASOURCE_ACTIVATE_ALL)
3. Re transported the datasource , transformation, DTP
Still getting the same issue
If you have any idea please reply asap.
SamitHi
Generate your datasource in R/3 then replicate and activate the transfer rules.
Regards,
Chandu. -
Data Load to BI (7.0 SP 9) from R3(ECC 6.0 SP-Basis 9)
Dear All,
We have new instance of Devlopment BW System with version 7.0 and R/3 upgraded to ECC6.0. We connected the source system. When we extract the data through DTP the data load is sucessful with 0 Records.
This is case with all the extractors.
The data base is on Oracle 10.2
Observations for this:
0) Source system connection check OK.
1) When I test in RSA3 for the same extract I could fetch some data there.
2) I could transfer the global setting
3) I could not see any of the iDoc generated in BW and received in R/3
4) No back ground job is generated in R/3 in SM37
5) I could extract the data from other Source System(SEM) instance based on 3.5 technology.
As a progress on this issue I could load the load sucessfully by 3.X methodolgy (Using update rules) but not by BI7.0 Methodology(Using Transformation).
As a standards by the client we have to use 7.0 Methodology so still need to find a solution for the same.
No clue on how to solve and what is going on wrong. Help me in solve this issue.
Thanks in Advance,
PV
Message was edited by:
USERPVI am not sure if you have followed all the necessary steps to do a data load to the infocube. I also wish I had more information about your system and the error message you are getting. A data load can fail due to a variety of reasons -- depending on the BW version, system settings and the procedure you followed. Please use the data load monitor transaction rsmo, identify the error message and take the necessary action.
if it may be useful reward point are appreciated
Maybe you are looking for
-
New to Macs with problems after 10.4.9 Update
Greetings. This is my first post on these forums, so please forgive the newbieness.. I received a brand new 15" MacBook Pro 2.13GHZ less than a week ago. I have since installed another 1GB of memory in it and it has been running absolutely beautifull
-
I recently upgraded from my older 30GB iPod to the 120GB iPod Classic. The gym I have a membership at has TV's built into all of the machines, and with my older iPod I could easily hook it up for video out. With the iPod classic, it simply keeps tell
-
Hi. I have some difficulties understanding the Oracle Reports mechanism of JNI. The problem I have is the report job is crashed when I use the imported java class. I am using Oracle Reports 11.1.2.1 on Oracle Linux The scenario of generating report i
-
WD Livewire 200 - Return from holiday, and now they wont sync up.
Hi there. I've been using my WD Livewire 200 kits for years, one in the bedroom where the router is (i know...**bleep** australian housing?) and one in the study - which is supplying internet to my and my wifes office PCs. We've just returned from a
-
Selection Criteria page printing in the inventory reports
Hi, Selection Criteria page printing in the inventory reports only. How to avoid that? For example: batch number transaction report. Thanks, Olga