Data Load Error  due to Master data deletion

Hi,
While doing the transactional data load I am getting following error.
+Master data/text of characteristic ZFOCUSGRP already deleted Message no RSDMD138   +
ZFOCUSGRP  is  an  InfoObject (with Text). Last week we changed the source system from CRM to R/3 during that time we deleted all the Texts in ZFOCUSGRP manually from the table.
This error is not happening always some time it load properly. I executed the RSRV for  InfoObject ZFOCUSGRP and InfoCube still this error happening.
Is there any way to fix this error?
Thanks in advance.
Thanks
Vinod

check this:
Re: Error while running InfoPackage
Master data/text of characteristic 0MATERIAL already deleted
Master data/text of characteristic ZXVY already deleted
Hope it helps..

Similar Messages

  • BW Data Load error due to special char's

    Hi Experts,
    Our BW System is a Uni Code, Master data load din BW failed due to special chars, I corrected the field manually in PSA and loaded the
    data.
    But I would like to know the reason for failure.
    Issue for failure is term SOCIÉTÉGÉN…..My understanding its French and BW should accept it…why is it failing?
    Thanks in advance

    Hi User,
    The alphabet ' É ' which you have mentioned is a special Character.
    To avoid this failure in future , Please add  " É" this alphabet in RSKC t-code which would help to avoid
    special characters.
    Please revert in case you need any further details.
    Thanks & Regards,
    RDS

  • Loading Error for an Master Data Info Object!!

    Hi all
      I am getting this error for set od records...But actually ...there is no data in that...How it reflects as duplicate records...Pls tell me wht is the solution for this??U can chk the attachment as well as there is no data for the column PE FULL NAME.....   which is the error stack in DTP..
    But  I can see the data in PSA for the particular data packet & record numbers...
    Pls help with regard to the issue.                                                                               
    Error Information:                                                                         
    Diagnosis                                                                               
    There are duplicates of the data record 2 & with the key                
        '000000000000000000000000000001E &' for characteristic ZPENAME &.                                                                               
    System Response                                                                               
    Procedure                                                                               
    If this message appears during a data load, maintain the attribute in   
        the PSA maintenance screens. If this message appears in the master data 
        maintenance screens, leave the transaction and call it again. This      
        allows you to maintain your master data.

    <i>1).If source field length is more than target field length..Is it wrong if we do mapping like this?????</i>
    Yes it is wrong, its okay the otherwise though.
    <i>2)Do u have any idea of long text which exceeds 60???I saw the blog of eugene ,but not sure how far it works..Can u guide me with regard to it as my datasource is created by function module..</i>
    I never dealt with it...sry !!

  • Error in data loads-Error occured in the data seletion

    Hi,
    We have to do an init load for Period 10 from data source 0EC_PCA_3.
    When the period changes we usually copy the previous infopack and change the fiscal yesr period and do an init load.
    This time we have to change the fiscal period to 010, we created a new info pack but the fiscal year period we forgot to change and was 009 and scheduled a init load.
    The load failed with error mesg  IN EXTRACTION PART:
    1) syntax error in RSCDELTA
    2) Error occured in the data selection -RSM 340
    REQUEST part in monitor screen is green.
    TRANSFER part in monitor screen is green
    EXTRACTION shows:
    Data request received ---green
    Data selection scheduled -
    green
    Error occurred in the data selection -
    RED
    Processing (data packet): No data ---RED
    We deleted the red request in the ods , deleted the init load in scheduled -init for source system --- chnaged the fiscal yesr period to 010 and triggered a new load but again it gives the same error mesg.
    How to rectify this and do loads to the target successfully.
    Please suggest

    Please check the job log in the source system. It will give you the exact reason why extraction is failing. You need to act accordingly.
    Thanks..
    Shambhu

  • Common data load errors in BI 7

    Hi , i would appreciate if any one can provide me a list with most common Data load errors effecting both master and transactional data in SAP BI 7 or BW 3.5..

    Hi AAL,
    There're lots of loading error posts in this forum. This one I guess is good for you:
    production support errors
    production support issues
    Or you can search yourself using key word common load error etc.
    Hope above helps.
    Regards,
    Frank

  • BI 7.0 : Error in loading text of a Master Data with a data source time dep

    I have a problem loading text from the data source(time dep) to the Master Data.
    For instance if the Data Source 0EVALGROUP1_TEXT is time dependent as there are the fields DATETO and DATEFROM, while i create the transformation these 2 fileds does not have any target fields. After i create the infopackage and execute it to load into the PSA, i have a error message : the message says "An error occurred in the source system."and "The error occurred in Extractor "; and the PSA is empty.
    Can anyone tell me if there is an OSS note to apply for this kind of problem, actually we are running under SAPKW70015 SAP_BW.
    Thanks for your help.

    Hi,
    Pl try the below
    The l_dta data target that you want to load is an InfoObject (master data or text
    table).
    You must declare this for the InfoProvider in Transaction RSD1.
    You do this on the 'Master Data/Text' tab by assigning any InfoArea to the InfoObject.
    The InfoProvider (that is, this InfoObject) is then displayed below this InfoArea in
    the InfoProvider tree.
    Rregards,
    Senthil

  • Inital material master data load error

    Hi experts,
    We are on ecc 6.0 and gts 7.1.
    While loading the initial material master data from R/3 to GTS,Transaction (/SAPSLL/MATMAS_DIRR3),I am getting the error ( for 1 material)- 
    Of 1 selected material(s), 0 were processed successfully
    Message no. /SAPSLL/PLUGINR3112
    When I try to load the required list of material, the error is same.
    The RFC data distribution model is working for vendors and customers properly.
    We want to use only compliance mngt and embargo functionality to block orders.
    Can you give me some guidence?

    Dear Milmuk,
    it is hard to tell, why it is not working. There could be different reasons.
    Please check if you have entered the correct data.
    It could be that the relevant tables for transfer are not filled.
    Please execute the following:
    - BD53                                                                
    - select message type (/SAPSLL/MATMAS_SLL)and edit it                 
    - select a segment                                                    
    - save                                                                
    - deselect segment again                                              
    - activate                                                            
    - set in trx BD60 the FM to the correct value                         
      (/SAPSLL/MATMAS_DISTRIBUTE_R3)                                                                               
    You can than check with the programm: '/SAPSLL/PLUGIN_CHECK_R3' if    
    all 4 required tables (TBD24, TBD62, TBDA2, TBDME) are filled, or not.
    If that's all fine I suggest you open a CSS ticket as then a more detailed analysis is necessary.
    Christin

  • Sap bw 7.3 master data load error

    sap bw 7.3 master data load error
    erroe: Exception in Substep Rules

    Hi Jayram,
    I am assuming that you are getting this error when you are loading data from PSA to IO. If so, the error might be because of
    1. Duplicate records
    PSA might have duplicate records. But you will be able to load only one record to Master data IO. In DTP Update tab, there is an option for "Handle Duplicate Record Keys" . Just enable this & try to load again.
    2. Erroneous records.
    Some special reocrds are allowed in PSA where as thye might not be allowed in Master Data/Data Targets like Lower case letters/ some speacial characters etc. If error is because of this, then you might need to correct the data at PSA level & reload the data to Master data. Else get it corrected in source system itself & fetch the data to BW. Or write some code to take care of these special characters.
    Hope it helps!
    Regards,
    Pavan

  • Most common BW data load errors in production and how to solve them ..

    Hi All,
    Most common BW data load errors in production and how to solve them ..
    Any doc on it ,if so plz send it across to this id [email protected]
    Thanks in advance.
    Rgrds
    shoba

    hi
    1) RFC connection lost.
    2) Invalid characters while loading.
    3) ALEREMOTE user is locked.
    4) Lower case letters not allowed.
    5) While loading the data i am getting messeage that 'Record
    the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
    6) object locked.
    7) "Non-updated Idocs found in Source System".
    8) While loading master data, one of the datapackage has a red light error message:
    Master data/text of characteristic 'so and so' already deleted .
    9) extraction job aborted in r3
    10) request couldnt be activated because theres another request in the psa with a smaller sid
    11) repeat of last delta not possible
    12) datasource not replicated
    13) datasource/transfer structure not active ´
    14) Idoc Or Trfc Error
    15. ODS Activation Error

  • Error when generating master data routines when activating infoobject

    Hello Gurus,
    I had an issue with one of my info object.
    I Created the one Custom InfoObject  with Just 5 Char without any masterdata and used that in many cubes. we promoted the objects and cube to test and production systems. just couple of days back we can see the InfoObject  went to inactive status even though the version is active(not sure how it happend). This is only happens in our test system and production is working fine. when i try to activate the InfoObject  again the test system it gives me an error
    Characteristic XXXXX: Error when generating master data routines. Tried to correct in RSD5 etc. Checked in RSRV everything is fine. Tried to re-promote the object from Development system. The transport also failed with the same error even though it is in unconditional mode.
    Can you please suggest me what are the options.
    i cannot delete the object as it is used in many cubes which is having data.
    Appreciate your quick response.
    Thanks,
    Bhaskara Rao.

    If your Prod is working fine, it should work in test too.
    Did it ever worked in test after transport?
    Is it possible some one tried to change something in test? If yes, you will get error when you will try to re-transport it as new transport can't find the previous structure.
    You may try to activate the IO using FM RSDG_IOBJ_ACTIVATE
    Edited by: ashok saha on Mar 6, 2008 8:05 PM

  • What are the frequent data load errors in production support?

    what are the frequent data load errors in production support?

    It is a long list. Here is some of them.
    1. Idoc not arriving from source system.
    2. previous processes failed.
    3. change run unsucessful or did not run properly and data in master data is messed up.
    4. invalid characteristics in the data.
    5. Duplicate records found.
    and on  and on.
    Ravi Thotahdri

  • Data Load Error: No SID Found for value.....

    Hi,
    I'm loading data for 0REFX_C01-Conditions Cube (Real Estate). Load Fails & error message is "Record 1 :No SID found for value 'IB20010000777700000001 ' of characteristic 0REOBJECT". Master data for 0REOBJ_ATTR & 0REOBJ_TEXT has already been loaded. 
    Description of Error:
    Characteristic value IB2001000077770000 does not exist in the master data table of characteristic 0REOBJECT. This value could not be be transformed into the internal SID.
    Could someone help me resolve this issue??
    Thanks in advance. Points will be rewarded.

    The record is coming from your source system. The reason why it's not in your Master Data can be either because it's new Master Data (created since last time you loaded) or a wrong input in the source system.
    Either way, the answer is in your source system, so make sure this definition exists there and its a valid value.
    If it is, try to load and activate your master data again and then load the cube once more.
    Regards,
    Luis

  • Data load error--urgent

    hi friends ,
    we are geting data load error as; Process 000087 for deterermined fro infoobject DUVTYPE started in STATUS TAB and in DETAILS TAB  update(251new/160 chnaged): Errors occured.
      what should i  know  from information and what are the reasons for this  load failure and possible rectification methods.
    This  load is through  process chains and aslo a delta load.
    Can i delete the request and start the infopackage manually? also will it make my Process chain Green automatically or  should i repeat from the subsequent process?
    Plz help.
    I award points.
    regards,
    siddartha

    Hi siddharta,
    look in the details of the monitor to see the error. Be very cautious with deltas! They can not be repeated every time. it depends on the datasource! What you can do is delete the failed request from all(!) the data targets meanwhile!
    Regards,
    Jzergen

  • 0COSTCENTER Error when generating master data routines

    Hi,
    Characteristic 0COSTCENTER properties are changed. Check box - Characteristic is document attrib. has been checked in. Then the same is saved and activated. Again when trying to remove the check box and activating the 0COSTCENTER characteristic, the system says 0COSTCENTER Error when generating master data routines.
    The Object Status of the Characteristic is showing in "Inactive, not executable".
    Erorr message is:
    Error in activating the InfoObjects
    Message no. R7286
    Please let me know how to activate 0COSTCENTER.
    Regards,
    Ravi

    This has been solved.
    In SE14, I have also deleted the data.
    Go to Tcode SE16, IO Class is BW* and then select the relevant attribute then execute, select all the line items.
    Go to Table Entry ==> Delete.
    Go to Tcode RSODADMIN and Tab => Go to Generate Document Properties Tab ==> Select the Characteristic ==> Click Generate Document Properties.
    I am able to activate the Infoobject 0COSTCENTER again.
    Hopefully, this would be helpful for others also.
    Regards,
    Ravi

  • "Error reading credit master data"  in contract management in CRM 7.0

    Hi All,
    In CRM 2007,whenever we navigate to contract management screen,error message come which is "Error reading credit master data "
    Any suggestion on how to solve this issue.
    Regrads
    Nikhil

    Hi All,
    This is resolved.
    Just set the  entry in the table CRMV_CREDIT_GEN to 'Do not Display credit master data '
    Regards

Maybe you are looking for

  • Turning back on the "manual update" feature in iTunes

    Ok, there's two iPods, mine and my sisters, and we both use the same iTunes. My iPod is set up to update automatically whenever I connect it to the computer and hers is set so that it doesnt automatically update when it's connected, but I just drag a

  • How do i add an email to a FaceTime and an iMessage account?

    I have another email besides my apple ID i would like to us eon face time and iMessage, so i go to add it in the settings, after entering my new setting it says verifying, i have let it set for a good 30 MINS and even hit resend email a few times, bu

  • How can i get my iPad back on the internet?

    Everything wad down today...cable, internet, etc.  Now it is back.  My iMac is right back on line and all is well.  The iPad, though, says I am not connected to the internet and nothing is working.  How do I get the iPad back on line.  I checked the

  • How can i change the font of email body in my inbox.(outlook 2013 64 bit).

    Hi, Is there a way I can change the email body font in outlook 2013 because I am not able to read the emails from my inbox. I am using outlook 2013 64 bit and facing reading email. Regards, Sandy

  • Fonts not displaying on Forms

    I have some Forms 6.0 forms that I've moved from one server to another and recompiled on the new server. Now, when I execute those forms, none of the fonts/text show up. All that is displayed is dashes/hyphens. What could be possibly the cause of suc