Data Load error in Hierarchy

Hi ,
While loading data to hierarchy im getting the below error.
Parent ID of node ID 00000828 is not the same as the ID of the higher level node
I have tried to analyze this issue , but not able to find the cause and fix this.Please help me to sort it out.
Thanks
Pradeep

Hi pradeep,
To load hierarchy you need to load a excel sheet containing a details of parent node id , node id etc..
so in that excel sheet ID of higher level node should be same as parent node id.
Please correct it manually in that excel sheet and reload it.
Thanks and Regards
Asim

Similar Messages

Most common BW data load errors in production and how to solve them ..

Hi All,
Most common BW data load errors in production and how to solve them ..
Any doc on it ,if so plz send it across to this id [email protected]
Thanks in advance.
Rgrds
shoba

hi
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light error message:
Master data/text of characteristic 'so and so' already deleted .
9) extraction job aborted in r3
10) request couldnt be activated because theres another request in the psa with a smaller sid
11) repeat of last delta not possible
12) datasource not replicated
13) datasource/transfer structure not active ´
14) Idoc Or Trfc Error
15. ODS Activation Error

What are the frequent data load errors in production support?

what are the frequent data load errors in production support?

It is a long list. Here is some of them.
1. Idoc not arriving from source system.
2. previous processes failed.
3. change run unsucessful or did not run properly and data in master data is messed up.
4. invalid characteristics in the data.
5. Duplicate records found.
and on and on.
Ravi Thotahdri

Data Loading Error : ToomanyError records.

Hi All,
I got Data Loading error when I am loading from Flat File.
Following is the error message :
Too many error records - update terminated
Error 18 in the update
No SID Found for value '00111805' of Characterstic ZUNIQUEID (Message No 70)
can anybody help in resolving the issue.
Regards,
Chakravarthy

hi
Check the format of your charecteristics and key figures .
Check you put data separators in you flat files approriately
In the particular charecteristics ZUNIQUEID ,ensure data is consistent...check the related tables
Assign points if useful
Regards
N Ganesh

Aggregating data loaded into different hierarchy levels

I have some problems when i try to aggregate a variable called PRUEBA2_IMPORTE dimensinated by time dimension (parent-child type).
I read the help in DML Reference of the OLAP Worksheet and it said the follow:
When data is loaded into dimension values that are at different levels of a hierarchy, then you need to be careful in how you set status in the PRECOMPUTE clause in a RELATION statement in your aggregation specification. Suppose that a time dimension has a hierarchy with three levels: months aggregate into quarters, and quarters aggregate into years. Some data is loaded into month dimension values, while other data is loaded into quarter dimension values. For example, Q1 is the parent of January, February, and March. Data for March is loaded into the March dimension value. But the sum of data for January and February is loaded directly into the Q1 dimension value. In fact, the January and February dimension values contain NA values instead of data. Your goal is to add the data in March to the data in Q1. When you attempt to aggregate January, February, and March into Q1, the data in March will simply replace the data in Q1. When this happens, Q1 will only contain the March data instead of the sum of January, February, and March. To aggregate data that is loaded into different levels of a hierarchy, create a valueset for only those dimension values that contain data. DEFINE all_but_q4 VALUESET time
LIMIT all_but_q4 TO ALL
LIMIT all_but_q4 REMOVE 'Q4'
Within the aggregation specification, use that valueset to specify that the detail-level data should be added to the data that already exists in its parent, Q1, as shown in the following statement. RELATION time.r PRECOMPUTE (all_but_q4)
How to do it this for more than one dimension?
Above i wrote my case of study:
DEFINE T_TIME DIMENSION TEXT
T_TIME
200401
200402
200403
200404
200405
200406
200407
200408
200409
200410
200411
2004
200412
200501
200502
200503
200504
200505
200506
200507
200508
200509
200510
200511
2005
200512
DEFINE T_TIME_PARENTREL RELATION T_TIME <T_TIME T_TIME_HIERLIST>
-----------T_TIME_HIERLIST-------------
T_TIME H_TIME
200401 2004
200402 2004
200403 2004
200404 2004
200405 2004
200406 2004
200407 2004
200408 2004
200409 2004
200410 2004
200411 2004
2004 NA
200412 2004
200501 2005
200502 2005
200503 2005
200504 2005
200505 2005
200506 2005
200507 2005
200508 2005
200509 2005
200510 2005
200511 2005
2005 NA
200512 2005
DEFINE PRUEBA2_IMPORTE FORMULA DECIMAL <T_TIME>
EQ -
aggregate(this_aw!PRUEBA2_IMPORTE_STORED using this_aw!OBJ262568349 -
COUNTVAR this_aw!PRUEBA2_IMPORTE_COUNTVAR)
T_TIME PRUEBA2_IMPORTE
200401 NA
200402 NA
200403 2,00
200404 2,00
200405 NA
200406 NA
200407 NA
200408 NA
200409 NA
200410 NA
200411 NA
2004 4,00 ---> here its right!! but...
200412 NA
200501 5,00
200502 15,00
200503 NA
200504 NA
200505 NA
200506 NA
200507 NA
200508 NA
200509 NA
200510 NA
200511 NA
2005 10,00 ---> here must be 30,00 not 10,00
200512 NA
DEFINE PRUEBA2_IMPORTE_STORED VARIABLE DECIMAL <T_TIME>
T_TIME PRUEBA2_IMPORTE_STORED
200401 NA
200402 NA
200403 NA
200404 NA
200405 NA
200406 NA
200407 NA
200408 NA
200409 NA
200410 NA
200411 NA
2004 NA
200412 NA
200501 5,00
200502 15,00
200503 NA
200504 NA
200505 NA
200506 NA
200507 NA
200508 NA
200509 NA
200510 NA
200511 NA
2005 10,00
200512 NA
DEFINE OBJ262568349 AGGMAP
AGGMAP
RELATION this_aw!T_TIME_PARENTREL(this_aw!T_TIME_AGGRHIER_VSET1) PRECOMPUTE(this_aw!T_TIME_AGGRDIM_VSET1) OPERATOR SUM -
args DIVIDEBYZERO YES DECIMALOVERFLOW YES NASKIP YES
AGGINDEX NO
CACHE NONE
END
DEFINE T_TIME_AGGRHIER_VSET1 VALUESET T_TIME_HIERLIST
T_TIME_AGGRHIER_VSET1 = (H_TIME)
DEFINE T_TIME_AGGRDIM_VSET1 VALUESET T_TIME
T_TIME_AGGRDIM_VSET1 = (2005)
Regards,
Mel.

Mel,
There are several different types of "data loaded into different hierarchy levels" and the aproach to solving the issue is different depending on the needs of the application.
1. Data is loaded symmetrically at uniform mixed levels. Example would include loading data at "quarter" in historical years, but at "month" in the current year, it does /not/ include data loaded at both quarter and month within the same calendar period.
= solved by the setting of status, or in 10.2 or later with the load_status clause of the aggmap.
2. Data is loaded at both a detail level and it's ancestor, as in your example case.
= the aggregate command overwrites aggregate values based on the values of the children, this is the only repeatable thing that it can do. The recomended way to solve this problem is to create 'self' nodes in the hierarchy representing the data loaded at the aggregate level, which is then added as one of the children of the aggregate node. This enables repeatable calculation as well as auditability of the resultant value.
Also note the difference in behavior between the aggregate command and the aggregate function. In your example the aggregate function looks at '2005', finds a value and returns it for a result of 10, the aggregate command would recalculate based on january and february for a result of 20.
To solve your usage case I would suggest a hierarchy that looks more like this:
DEFINE T_TIME_PARENTREL RELATION T_TIME <T_TIME T_TIME_HIERLIST>
-----------T_TIME_HIERLIST-------------
T_TIME H_TIME
200401 2004
200402 2004
200403 2004
200404 2004
200405 2004
200406 2004
200407 2004
200408 2004
200409 2004
200410 2004
200411 2004
200412 2004
2004_SELF 2004
2004 NA
200501 2005
200502 2005
200503 2005
200504 2005
200505 2005
200506 2005
200507 2005
200508 2005
200509 2005
200510 2005
200511 2005
200512 2005
2005_SELF 2005
2005 NA
Resulting in the following cube:
T_TIME PRUEBA2_IMPORTE
200401 NA
200402 NA
200403 2,00
200404 2,00
200405 NA
200406 NA
200407 NA
200408 NA
200409 NA
200410 NA
200411 NA
200412 NA
2004_SELF NA
2004 4,00
200501 5,00
200502 15,00
200503 NA
200504 NA
200505 NA
200506 NA
200507 NA
200508 NA
200509 NA
200510 NA
200511 NA
200512 NA
2005_SELF 10,00
2005 30,00
3. Data is loaded at a level based upon another dimension; for example product being loaded at 'UPC' in EMEA, but at 'BRAND' in APAC.
= this can currently only be solved by issuing multiple aggregate commands to aggregate the different regions with different input status, which unfortunately means that it is not compatable with compressed composites. We will likely add better support for this case in future releases.
4. Data is loaded at both an aggregate level and a detail level, but the calculation is more complicated than a simple SUM operator.
= often requires the use of ALLOCATE in order to push the data to the leaves in order to correctly calculate the aggregate values during aggregation.

Data Load error Please respond ASAP

Hi ,
When i am trying to load data for year 07 using rule files its showing an error and aborting the data load
Error Msg " Data Value [2007] Encountered before all dimensions Selected,[5] Records Completed"
Any help greatly appreciated.
Thanks

Key here is that 5 records were loaded before failing on the 6th, indicating it's not a header issue on the load rule.
Check the first 5 records and see how the column containing 2007 differs between them and the failing 6th record. Perhaps the 6th record has a null (as indicated eariler) or prehaps 2007 is not the name of the member in the outline.
I have had both issues give similar error results.
J

Data load error regarding timestamp

Hi All,
I am getting data load error related to time.
I am using 2lis_02_SCN for CNFTM(time stamp) filed
with value "08:00:" need to convert to 08:00:00...for some records and rest of the records are coming with normal 6 digit time.
please send your suggestion as early as possible.
Thanks
Rupa

Hi Rupa,
Try out following sample code inthe transfer rule for the same info object and it should work
lv_len = strlen( str ).
if lv_len = 4.
concatenate str '00' into str.
endif
Regards
Kapadia

Common data load errors in BI 7

Hi , i would appreciate if any one can provide me a list with most common Data load errors effecting both master and transactional data in SAP BI 7 or BW 3.5..

Hi AAL,
There're lots of loading error posts in this forum. This one I guess is good for you:
production support errors
production support issues
Or you can search yourself using key word common load error etc.
Hope above helps.
Regards,
Frank

Sap bw 7.3 master data load error

sap bw 7.3 master data load error
erroe: Exception in Substep Rules

Hi Jayram,
I am assuming that you are getting this error when you are loading data from PSA to IO. If so, the error might be because of
1. Duplicate records
PSA might have duplicate records. But you will be able to load only one record to Master data IO. In DTP Update tab, there is an option for "Handle Duplicate Record Keys" . Just enable this & try to load again.
2. Erroneous records.
Some special reocrds are allowed in PSA where as thye might not be allowed in Master Data/Data Targets like Lower case letters/ some speacial characters etc. If error is because of this, then you might need to correct the data at PSA level & reload the data to Master data. Else get it corrected in source system itself & fetch the data to BW. Or write some code to take care of these special characters.
Hope it helps!
Regards,
Pavan

Data load error--urgent

hi friends ,
we are geting data load error as; Process 000087 for deterermined fro infoobject DUVTYPE started in STATUS TAB and in DETAILS TAB update(251new/160 chnaged): Errors occured.
what should i know from information and what are the reasons for this load failure and possible rectification methods.
This load is through process chains and aslo a delta load.
Can i delete the request and start the infopackage manually? also will it make my Process chain Green automatically or should i repeat from the subsequent process?
Plz help.
I award points.
regards,
siddartha

Hi siddharta,
look in the details of the monitor to see the error. Be very cautious with deltas! They can not be repeated every time. it depends on the datasource! What you can do is delete the failed request from all(!) the data targets meanwhile!
Regards,
Jzergen

CX_RSR_X_MESSAGE Data load error in Quality system

Hi
We are on BI.7 and trying to load Technical content data for first time in Quality system .
We get the following error :
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_RSR_X_MESSAGE
for all the technical content data load.
The other data loads are working fine in the quality system.
We searched a lot on the forum and got various solutions like try out note 615389, 963760 etc.. But none of them are working fine for us.
Please suggest.
Thanks you for your help.
Gaurav

Hi
The error log is as follows -
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_RSR_X_MESSAGE
Date and Time          23.01.2009 10:06:08
Short text
     An exception occurred that was not caught.
What happened?
     The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
      along
     the call hierarchy.
     Since exceptions represent error situations and this error was not
     adequately responded to, the running ABAP program 'SAPLRRMS' has to be
     terminated.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
     and
    therefore caused a runtime error.
    The reason for the exception is:
    No text available for this exception
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
    "SAPLRRMS" or "LRRMSU13"
    "RRMS_X_MESSAGE"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
It gives a error in the last step of executing infopackage wherein the data is to be updated to the infocube.
I checked with Basis team. There is no tablespace problem as well.
Regards
Gaurav

Data load Error to Planning

Hi All,
I have created One Interface for loading data to Planning Application i have make the Account Dimension as Load dimension and Segment as Driver dimension (member is Audio)
I have created one form for this now when i am running the interface its get successfully executed but at report statics it showing following problem
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 2, in ?
Planning Writer Load Summary:
 Number of rows successfully processed: 0
 Number of rows rejected: 48
 at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
 at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:345)
 at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:169)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2374)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java:1615)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java:1580)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2755)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java:68)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
 at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
 at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
 at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
 at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:322)
 at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
 at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
 at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:237)
 at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:794)
 at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
 at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
 at java.lang.Thread.run(Thread.java:619)
I have find out a log file for it which says :
Account,Data Load Cube Name,MP3,Point-of-View,Error_Reason
Max Hits Per Day,Consol,Jan,"USD,Cannot load dimension member, error message is: java.lang.IllegalArgumentException: Unbalanced double quotes found at character 3 in the member list: "USD
Avg Hits Per Day,Consol,Jan,"USD,Cannot load dimension member, error message is: java.lang.IllegalArgumentException: Unbalanced double quotes found at character 3 in the member list: "USD
Can any buddy tell me what i did wrong. My Data file not contains any Double Quote mark with USD the POV is like this :---> USD,E01_0 ,Jan,Current,Working,FY11
Thanks
Gourav Atalkar
Edited by: Gourav Atalkar(ELT) on May 3, 2011 4:06 AM

As it is comma separated and all the members for the POV need to be together try enclosing it in quotes e.g "USD,E01_0 ,Jan,Current,Working,FY11"
Cheers
John
http://john-goodwin.blogspot.com/

Material Master Data Loading Error

Hi All,
I am loading master data for material. i got the following error.
1. 0material_attr :
    Record 1 :0MATERIAL : Data record 1 ('000000000000010220 '): Version '000000000000010220 ' is not   valid
    Process :   If this message appears during a data load, maintain the attribute in
                     the PSA maintenance screens. If this message appears in the master data
                     maintenance screens, leave the transaction and call it again. This
2.0material_text : Data record 1 ('000000000000010220E '): Version '000000000000010220 ' is not valid
   Process : Same as above.
I have applied RSKC tcode in BI with ALL_CAPITAL, ALL_CAPITAL_PLUS_HEX, and one special character string. but still getting the same error.
Regards,
Komik Shah

Hi All,
Thanks for the reply. i have solved most of errors. but there are some errors like this
Diagnosis
    Data record 261 & with the key '000000000000132559 &' is invalid in
    value '10x8x5 &' of the attribute/characteristic 0SIZE_DIM &.
System Response
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This allows to maintain your masterdata
which string i should have to add in RSKC to remove this error ? i have already added the ALL_CAPITAL, ALL_CAPITAL_PLUS_HEX.
I have assigned points.
Regards,
Komik Shah

Data Load Error

Everytime i try to run data load i get the following error,
Object [7905367] is locked by user [user3k]
Unable to load database, locales [English_UnitedStates.Latin1@Binary] and [English_UnitedStates.US-ASCII@Binary] are not compatible
Object [7905367] unlocked by user [user3k]
Unexpected Essbase error 1019057
The rule file is validating successfully.

Not sure where the difference in ESSLANG is occuring. Is the ESSLANG variable on the EAS server different to the Essbase server?
Gee

Error 8 when starting the extracting the program-data load error:status 51

Dear all,
I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
bi data upload error:status 51 - error: Error 8 when starting the extracting the program 
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
 IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
 Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
 r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
 IDoc sent to SAP system or external program"
 bw side: "IDoc: 0000000000007089 Status: Application document posted,
 IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
 check connection is ok, tried to restore the setting for bw-r3 connection though same problem
 Have checked partner profile.
what's wrong with the process? 
Best regards,
dushyant.

Hi,
 Refer note 140147.
Regards,
Meiy

Data Load error in Hierarchy

Similar Messages

Maybe you are looking for