Data load error in PSA
hellow gurus
i have run the data load for 2lis_02_scl at psa level..
but when i went to RSMO
i m seein
Transfer ( Idoc and TRFC) : error occured
Reuest IDoc : application documented posted
Info Idoc1: Sent not arrived ,Data Passed to port Ok
how to resolve this error
thanks
points wil be assigned as my gesture
Regards
Rahul
Hi,
Check SM58 and BD87 for pending tRFCs/IDOCS and execute them manually.
Transact RFC error
tRFC Error - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
IDOCS Process Manually
http://help.sap.com/saphelp_nw04s/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b815e43d711d1893e0000e8323c4f/content.htm
&messageID=2311994
Thanks,
JituK
Similar Messages
-
Most common BW data load errors in production and how to solve them ..
Hi All,
Most common BW data load errors in production and how to solve them ..
Any doc on it ,if so plz send it across to this id [email protected]
Thanks in advance.
Rgrds
shobahi
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light error message:
Master data/text of characteristic 'so and so' already deleted .
9) extraction job aborted in r3
10) request couldnt be activated because theres another request in the psa with a smaller sid
11) repeat of last delta not possible
12) datasource not replicated
13) datasource/transfer structure not active ´
14) Idoc Or Trfc Error
15. ODS Activation Error -
Sap bw 7.3 master data load error
sap bw 7.3 master data load error
erroe: Exception in Substep RulesHi Jayram,
I am assuming that you are getting this error when you are loading data from PSA to IO. If so, the error might be because of
1. Duplicate records
PSA might have duplicate records. But you will be able to load only one record to Master data IO. In DTP Update tab, there is an option for "Handle Duplicate Record Keys" . Just enable this & try to load again.
2. Erroneous records.
Some special reocrds are allowed in PSA where as thye might not be allowed in Master Data/Data Targets like Lower case letters/ some speacial characters etc. If error is because of this, then you might need to correct the data at PSA level & reload the data to Master data. Else get it corrected in source system itself & fetch the data to BW. Or write some code to take care of these special characters.
Hope it helps!
Regards,
Pavan -
Data load error in 0EC_PCA_1
Dear all,
In the data source 0EC_PCA_1 during delta load, on one day the load has failed in the PSA due to TRFC connection problem. Subsequently loading on all other days had taken place.The load had failed on 17.04.2008 - subsequent load had been updated to the cube.
Now when data reconciliation is done, there seems to be mismatch in the data. Can anyone clear my following doubts.
1) if data (delta) is failed on a particular day, the subsequent correct loads will fetch the failed data also or not.
If the data (failed) will not be fetched during the subsequent loads then how to load that particular delta alone to the cube.
Kindly provide steps and also the pricipal involved in the delta load mechanism.
Experts help expected.
Regards,
M.MDear Mr. Simon,
Thank you on the onset for the prompt reply and sorry for the late response. The principle in which the 0EC_PCA_1 data source works had been explained by you. In case of data load failures you had suggested to do repair load in the ODS.
My problem is that the load has failed in the PSA. Is it the cause of the missing data. i.e., if data load (delta) has failed on a particular day the subsequent day's correct load will not capture the left over delta that has failed - this is where i am bit confused on the genral priciple of the delta load mechanism.
Can you kindly suggest methods with steps to do reload in case the data load to the PSA will not capture the left over failed delta?
Your inputs and updation will be very helpful. Kindly also try to explain the delta mechanism.
Regards,
M.M -
What are the frequent data load errors in production support?
what are the frequent data load errors in production support?
It is a long list. Here is some of them.
1. Idoc not arriving from source system.
2. previous processes failed.
3. change run unsucessful or did not run properly and data in master data is messed up.
4. invalid characteristics in the data.
5. Duplicate records found.
and on and on.
Ravi Thotahdri -
Data Loading Error : ToomanyError records.
Hi All,
I got Data Loading error when I am loading from Flat File.
Following is the error message :
Too many error records - update terminated
Error 18 in the update
No SID Found for value '00111805' of Characterstic ZUNIQUEID (Message No 70)
can anybody help in resolving the issue.
Regards,
Chakravarthyhi
Check the format of your charecteristics and key figures .
Check you put data separators in you flat files approriately
In the particular charecteristics ZUNIQUEID ,ensure data is consistent...check the related tables
Assign points if useful
Regards
N Ganesh -
Data Load error Please respond ASAP
Hi ,
When i am trying to load data for year 07 using rule files its showing an error and aborting the data load
Error Msg " Data Value [2007] Encountered before all dimensions Selected,[5] Records Completed"
Any help greatly appreciated.
ThanksKey here is that 5 records were loaded before failing on the 6th, indicating it's not a header issue on the load rule.
Check the first 5 records and see how the column containing 2007 differs between them and the failing 6th record. Perhaps the 6th record has a null (as indicated eariler) or prehaps 2007 is not the name of the member in the outline.
I have had both issues give similar error results.
J -
Data load error regarding timestamp
Hi All,
I am getting data load error related to time.
I am using 2lis_02_SCN for CNFTM(time stamp) filed
with value "08:00:" need to convert to 08:00:00...for some records and rest of the records are coming with normal 6 digit time.
please send your suggestion as early as possible.
Thanks
RupaHi Rupa,
Try out following sample code inthe transfer rule for the same info object and it should work
lv_len = strlen( str ).
if lv_len = 4.
concatenate str '00' into str.
endif
Regards
Kapadia -
Common data load errors in BI 7
Hi , i would appreciate if any one can provide me a list with most common Data load errors effecting both master and transactional data in SAP BI 7 or BW 3.5..
Hi AAL,
There're lots of loading error posts in this forum. This one I guess is good for you:
production support errors
production support issues
Or you can search yourself using key word common load error etc.
Hope above helps.
Regards,
Frank -
hi friends ,
we are geting data load error as; Process 000087 for deterermined fro infoobject DUVTYPE started in STATUS TAB and in DETAILS TAB update(251new/160 chnaged): Errors occured.
what should i know from information and what are the reasons for this load failure and possible rectification methods.
This load is through process chains and aslo a delta load.
Can i delete the request and start the infopackage manually? also will it make my Process chain Green automatically or should i repeat from the subsequent process?
Plz help.
I award points.
regards,
siddarthaHi siddharta,
look in the details of the monitor to see the error. Be very cautious with deltas! They can not be repeated every time. it depends on the datasource! What you can do is delete the failed request from all(!) the data targets meanwhile!
Regards,
Jzergen -
Material Master Data Loading Error
Hi All,
I am loading master data for material. i got the following error.
1. 0material_attr :
Record 1 :0MATERIAL : Data record 1 ('000000000000010220 '): Version '000000000000010220 ' is not valid
Process : If this message appears during a data load, maintain the attribute in
the PSA maintenance screens. If this message appears in the master data
maintenance screens, leave the transaction and call it again. This
2.0material_text : Data record 1 ('000000000000010220E '): Version '000000000000010220 ' is not valid
Process : Same as above.
I have applied RSKC tcode in BI with ALL_CAPITAL, ALL_CAPITAL_PLUS_HEX, and one special character string. but still getting the same error.
Regards,
Komik ShahHi All,
Thanks for the reply. i have solved most of errors. but there are some errors like this
Diagnosis
Data record 261 & with the key '000000000000132559 &' is invalid in
value '10x8x5 &' of the attribute/characteristic 0SIZE_DIM &.
System Response
The system has recognized that the value mentioned above is invalid, and
has processed this general error message. A subsequent message may give
you more information on the error. This message refers to the same
value, even though it does not state this explicitly.
Procedure
If this message appears during a data load, maintain the attribute in
the PSA maintenance screens. If this message appears in the master data
maintenance screens, leave the transaction and call it again. This allows to maintain your masterdata
which string i should have to add in RSKC to remove this error ? i have already added the ALL_CAPITAL, ALL_CAPITAL_PLUS_HEX.
I have assigned points.
Regards,
Komik Shah -
0MATERIAL master data loading error - version not valid
Hi all,
When i am trying to load 0material master data , i get the following error :
0MATERIAL:Data record 1 ('000000000000100001 '): Version '000000000000100001 ' is not valid RSDMD 194
System diagnosis :
Data record 1 & with key '000000000000100001 &' is invalid in value '000000000000100001 &' of the attribute or characteristic 0material &.
System response
The system has recognized that the value mentioned above is invalid, and has processed this general error message. A subsequent message may give you more information on the error. This message refers to the same value, even though it does not state this explicitly.
Procedure
If this message appears during a data load, maintain the attribute in the PSA maintenance screens. If this message appears in the master data maintenance screens, leave the transaction and call it again. This allows you to maintain your master data.
Please help me solve this problem. Will assign points.
Thanks & Regards,Hi Stefen,
Thanks a lot for your input.. It has solved my problem as well.
10 points from me
Thanks a lot.
Regards
Dolly -
Master data loading error: RSDMD 194
Hi Experts,
I working on BI7.0,
I have loaded 0Material data upto PSA from R/3 successfuly. When I try
to execute DTP from PSA to 0Material Master data it is giving following error,
but some records loaded successfully from PSA to Target.
0MATERIAL : Data record 1 ('310957 '): Version '310957 ' is not valid RSDMD 194
Diagnosis
Data record 1 & with the key '310957 &' is invalid in value '310957 &'
of the attribute/characteristic 0MATERIAL &.
System Response
The system has recognized that the value mentioned above is invalid, and
has processed this general error message. A subsequent message may give
you more information on the error. This message refers to the same
value, even though it does not state this explicitly.
Procedure
If this message appears during a data load, maintain the attribute in
the PSA maintenance screens. If this message appears in the master data
maintenance screens, leave the transaction and call it again. This
allows you to maintain your master data.
Procedure for System Administration
Kindly advise.
Thanks in advance.
Maruthi.Hi -
I faced the same issue.
Error : 'RSDMD 184'
It was delta load. Initial load went well, but delta failed. I ran the delta after some days after initial load.
The problem was with the source system data. Just check the source data once with R/3 people. Delete data from BW and replicate the data source and activate transfer structure and try loading again.
Tks,
Praveen Tati -
Data Loading Error for cube 0TCT_C22
Dear Colleagues,
I am working on BI 7.0 / SP09.
I am loading technical content cube 0TCT_C22 from datasource 0TCT_DS22. Till PSA, there is no problem with data load. But from PSA to data target, data load fails. Went to monitor and it shows teh error "Error calling number range object 0TCTPRCSCHN for dimension D2 ( ). Message no: RSAU023".
I tried to find the SAP notes fro this, but no success. Also checked the Dump and application logs, but nothing is there.
Please advice ASAP.
Regards
PSHi Pank,
I just solved the very similar issue. Try what I did to see if it works for you. For each dimension in each Infocube a number range is created. For some weird reason during the activation of the Infocube the number range for the dimension giving troubles was not created. Look for it in TCODE SNRO and you should find a number range per each dimension in the cube but the one giving you error.
To solve it, (the easiest way I found) just add any characteristic to the problematic dimension. Activate the Infocube. After that, modify again you Infocube and remove the characteristic you just added to leave the dimension how you need it. Activate the Infocube again. By doing that you will force the regeneration of the dimension and with it the number range. You can chek in TCODE SNRO and the number range should be there. Try loading your data again and it should work.
One thing I don't understand is why that number range sometimes is not created during activation
Good luck, I hope you can solve it!!!
Regards,
Raimundo Alvarez -
Data load error for master data
hi
both errors i need to fix manually or any automatic is there
psa i need to edit that record and run again infopackage.
i need keep that infoobject(BIC/ZAKFZKZ ) alpha conversion at infoobject level.
Errors in values of the BOM explosion number field:
Diagnosis
Data record 5584 & with the key '001 3000000048420000 &' is invalid in
value 'BOX 55576\77 &' of the attribute/characteristic 0RT_SERIAL &.
InfoObject /BIC/ZAKFZKZ contains non-alpha compliant value 1Hi Suneel,
I feel that the symbol '&' is cauing the issue in ur data loads..
So try to edit the same at the PSA and then load the data from PSa to the target..
Also u can use RSKC to handle these special Chars..
For more information u can search SDN..
Thanks
Hope this helps
Maybe you are looking for
-
If CD-R's no longer play read this as possible fix
Hi, After going round and round with Applecare and CompUSa the store that sold me my eMac 1.0 ghz (stock 128mb ram) 40 gb HD. Issue was no longer able to play any type of burned CD's or burn CD's (photos/music etc) Comp USA at point of sale upgraded
-
Hi. This is for Ebook conversion purpose, Currently am doing the text accuracy for English(EN) and Latin(EU) books using Acrobat 11 Pro application with Source and Converted PDF(final output of epub/mobi). Similarly am trying to find the text accurac
-
Well I've had linux for about a year or so now....Well I suppose longer than that but I didn't use it for a while but here I am full time user of Linux for about a year now, wahoo! Anyways, I suppose its time to dabble into some coding so I can under
-
Help:Javascript on OA page
Hi, I am using javascript to open a popup window when i click on a Button at OA page. In the popup window i am having a cancel button whose destination function is pointing to base page.When i click on cancel, base page is opening in popwindow only.B
-
Not sure what I've done but clicking on my Mail icon doesn't open my email. Any ideas?
Looking for help. The mail icon is showing a light. When i click on it doesn't open email - does nothing. Not sure what I've done or what i need to do. Help please.