Data Load Error in Rate Application
Hello,
We are trying to load data to RATE application from a BW infoprovider via data manager. We are encountering the below error
Cannot access the member (ACTUAL) of dimension (CATEGORY)
Line 0 :ACTUAL,BRL,AVG,GLOBAL,2009.APR,0.0000000
All dimensions are processed and Category ACTUAL can be accessed from other applications. Any help is greatly appreciated.
Thanks,
Shai
Hi,
Please check your rate application. Verify that CATEGORY dimension is available in the RATE application and this dimension has the member ACTUAL. In addition to this check for the other members also in their corresponding dimensions. And make sure these dimensions are available in the RATE application.
Hope this helps.
Similar Messages
-
Most common BW data load errors in production and how to solve them ..
Hi All,
Most common BW data load errors in production and how to solve them ..
Any doc on it ,if so plz send it across to this id [email protected]
Thanks in advance.
Rgrds
shobahi
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light error message:
Master data/text of characteristic 'so and so' already deleted .
9) extraction job aborted in r3
10) request couldnt be activated because theres another request in the psa with a smaller sid
11) repeat of last delta not possible
12) datasource not replicated
13) datasource/transfer structure not active ´
14) Idoc Or Trfc Error
15. ODS Activation Error -
What are the frequent data load errors in production support?
what are the frequent data load errors in production support?
It is a long list. Here is some of them.
1. Idoc not arriving from source system.
2. previous processes failed.
3. change run unsucessful or did not run properly and data in master data is messed up.
4. invalid characteristics in the data.
5. Duplicate records found.
and on and on.
Ravi Thotahdri -
Data Loading Error : ToomanyError records.
Hi All,
I got Data Loading error when I am loading from Flat File.
Following is the error message :
Too many error records - update terminated
Error 18 in the update
No SID Found for value '00111805' of Characterstic ZUNIQUEID (Message No 70)
can anybody help in resolving the issue.
Regards,
Chakravarthyhi
Check the format of your charecteristics and key figures .
Check you put data separators in you flat files approriately
In the particular charecteristics ZUNIQUEID ,ensure data is consistent...check the related tables
Assign points if useful
Regards
N Ganesh -
Data Load error Please respond ASAP
Hi ,
When i am trying to load data for year 07 using rule files its showing an error and aborting the data load
Error Msg " Data Value [2007] Encountered before all dimensions Selected,[5] Records Completed"
Any help greatly appreciated.
ThanksKey here is that 5 records were loaded before failing on the 6th, indicating it's not a header issue on the load rule.
Check the first 5 records and see how the column containing 2007 differs between them and the failing 6th record. Perhaps the 6th record has a null (as indicated eariler) or prehaps 2007 is not the name of the member in the outline.
I have had both issues give similar error results.
J -
Data load error regarding timestamp
Hi All,
I am getting data load error related to time.
I am using 2lis_02_SCN for CNFTM(time stamp) filed
with value "08:00:" need to convert to 08:00:00...for some records and rest of the records are coming with normal 6 digit time.
please send your suggestion as early as possible.
Thanks
RupaHi Rupa,
Try out following sample code inthe transfer rule for the same info object and it should work
lv_len = strlen( str ).
if lv_len = 4.
concatenate str '00' into str.
endif
Regards
Kapadia -
Common data load errors in BI 7
Hi , i would appreciate if any one can provide me a list with most common Data load errors effecting both master and transactional data in SAP BI 7 or BW 3.5..
Hi AAL,
There're lots of loading error posts in this forum. This one I guess is good for you:
production support errors
production support issues
Or you can search yourself using key word common load error etc.
Hope above helps.
Regards,
Frank -
Sap bw 7.3 master data load error
sap bw 7.3 master data load error
erroe: Exception in Substep RulesHi Jayram,
I am assuming that you are getting this error when you are loading data from PSA to IO. If so, the error might be because of
1. Duplicate records
PSA might have duplicate records. But you will be able to load only one record to Master data IO. In DTP Update tab, there is an option for "Handle Duplicate Record Keys" . Just enable this & try to load again.
2. Erroneous records.
Some special reocrds are allowed in PSA where as thye might not be allowed in Master Data/Data Targets like Lower case letters/ some speacial characters etc. If error is because of this, then you might need to correct the data at PSA level & reload the data to Master data. Else get it corrected in source system itself & fetch the data to BW. Or write some code to take care of these special characters.
Hope it helps!
Regards,
Pavan -
hi friends ,
we are geting data load error as; Process 000087 for deterermined fro infoobject DUVTYPE started in STATUS TAB and in DETAILS TAB update(251new/160 chnaged): Errors occured.
what should i know from information and what are the reasons for this load failure and possible rectification methods.
This load is through process chains and aslo a delta load.
Can i delete the request and start the infopackage manually? also will it make my Process chain Green automatically or should i repeat from the subsequent process?
Plz help.
I award points.
regards,
siddarthaHi siddharta,
look in the details of the monitor to see the error. Be very cautious with deltas! They can not be repeated every time. it depends on the datasource! What you can do is delete the failed request from all(!) the data targets meanwhile!
Regards,
Jzergen -
Hi All,
I have created One Interface for loading data to Planning Application i have make the Account Dimension as Load dimension and Segment as Driver dimension (member is Audio)
I have created one form for this now when i am running the interface its get successfully executed but at report statics it showing following problem
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 2, in ?
Planning Writer Load Summary:
Number of rows successfully processed: 0
Number of rows rejected: 48
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:345)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:169)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2374)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java:1615)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java:1580)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2755)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java:68)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:322)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:237)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:794)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:619)
I have find out a log file for it which says :
Account,Data Load Cube Name,MP3,Point-of-View,Error_Reason
Max Hits Per Day,Consol,Jan,"USD,Cannot load dimension member, error message is: java.lang.IllegalArgumentException: Unbalanced double quotes found at character 3 in the member list: "USD
Avg Hits Per Day,Consol,Jan,"USD,Cannot load dimension member, error message is: java.lang.IllegalArgumentException: Unbalanced double quotes found at character 3 in the member list: "USD
Can any buddy tell me what i did wrong. My Data file not contains any Double Quote mark with USD the POV is like this :---> USD,E01_0 ,Jan,Current,Working,FY11
Thanks
Gourav Atalkar
Edited by: Gourav Atalkar(ELT) on May 3, 2011 4:06 AMAs it is comma separated and all the members for the POV need to be together try enclosing it in quotes e.g "USD,E01_0 ,Jan,Current,Working,FY11"
Cheers
John
http://john-goodwin.blogspot.com/ -
Error 8 when starting the extracting the program-data load error:status 51
Dear all,
<b>I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). </b>The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
<b>bi data upload error:status 51 - error: Error 8 when starting the extracting the program </b>
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
IDoc sent to SAP system or external program"
r<b>/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
Error 8 when starting the extraction program</b>
Info IDoc 1 : Application document posted (green)
r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
IDoc sent to SAP system or external program"
bw side: "IDoc: 0000000000007089 Status: Application document posted,
IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
check connection is ok, tried to restore the setting for bw-r3 connection though same problem
Have checked partner profile.
<b>what's wrong with the process? </b>
Best regards,
dushyant.Hi,
Refer note 140147.
Regards,
Meiy -
Data Load Error - Unknown Item
Under the advisement of an Oracle engineer our users were instructed to export the data from one of their DBs using "Level 0 Data", and then import the data back into the database. This process was needed in order to allow us to restore compression on our DBs as it had been lost during a patching process.
In any event,
I've exported the data to a .txt file and now I am attempting to load the file back into the database. I am receiving the below error:
Parallel dataload Enabled: [1] block prepare threads, [1] block write threads.
Unknown Item[-1. #IND] in Data Load, [360639] Records Completed.
Unexpected Essbase error 1003000
I did some searching on the web and located a discussion topic dealing with this type of an error. Id indicated that the error was related to an attempt to write a value to the DB that does not have a corresponding "table" in the DB. I 'kind of see' that from the error message, but I don’t understand how it could be occurring if the data export and import are occurring on the exact same application DB.
Any assistance would be greatly appreciated.
Thanks!It is a planning database, if so log on my oracle support and have a read of -
Error "1003000 Unknown Item [1.#QNAN] or [-1.#IND] in Data Load, [xxxx] Records Completed" [ID 961934.1]
Even if it is not there is invalid data that has been exported.
Cheers
John
http://john-goodwin.blogspot.com/ -
I am attempting to load our data pulled from our HFM application into Essbase. I keep getting "data value encountered before all dimensions selected" error. I have checked the load file line by line and the rule everything lines up correctly from the file to the rule. We have recently migrated our Planning application to 3.3.1 of Planning and Essbase 6.5.4. We have loaded data before in this new system but for some reason I can't get this to load. Any ideas or help would be greatly appreciated. thanks,Eleasha
Is every dimension in the OUTLINE represented in the data file? If not, do the unrepresented dimensions have a member specified in the headers?If every dimension is represented, do the data fields come AFTER the member fields?
-
Hello all-
I extracted some data on flat file from my application in production using report script and i am trying to push the data in another essbase cube using rule file and it comes up with following error:
Reading Rule SQL Information For Database [Database name]
Reading Rules From Rule Object For Database [Database name]
Parallel dataload enabled: [1] block prepare threads, [1] block write threads.
Loading Unicode-encoded data to non-Unicode mode application is not supported
Unexpected Essbase error 1003048
I have previously pushed the level 0 data export many times and this time i am trying to push it via rule file and it come up with this error. How can i look if my orginal application is a unicode application or not??? The rule file that i am using is also from the source application .. I tried loading the data in the same source application but different database and it came up up with same error... Anybody have come across this error before?
Please advise!*Error “Loading Unicode Encoded Data to Non Unicode Mode Application is not Supported” When Importing An Export File. [ID 764447.1]*
Symptoms
When doing an export with a Report Script the export file is being saved as an UTF-8 document.
Subsequently when importing the export file back into the database the following error occurs:
“Loading Unicode encoded data to Non Unicode mode application is not supported”.
The file has to be saved as an ANSI file for the import to work.
Cause
When exporting data from the EAS console, the export file is created as UTF-8 encoded.
As such Essbase cannot read this file when importing it back in.
This is Bug 6763776 and has been fixed in version 11.1.1.
Solution
This issue has been fixed in version 11.1.1.
If you are unable to upgrade at this time then the suggested workaround is to use MaxL or Esscmd to run the report script, as running it in this manner will save the file in non-unicode mode and thus allow you to load it back in without errors.
Cheers
John
http://john-goodwin.blogspot.com/ -
hi there,
i having a problem, i'm not able to load data from 3rd party to bw, it is given an error,
Error in ABAP application program.
The current ABAP program "SAPMSYST" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
t can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
or analysis
During background processing, the system attempted to send a
screen to a user.
Current screen: "SAPMSYST " 0040.
Information on where terminated
The termination occurred in the ABAP program "SAPMSYST" in "SYSTEM-EXIT".
The main program was "SAPMSYST ".
The termination occurred in line 0 of the source code of the (Include)
program " "
of the source code of program " " (when calling the editor 00).
Internal notes
The termination occurred in the function "dynpex00" of th
Basis System, specifically in line 1527 of the module
"//bas/640_REL/src/krn/dynp/dymain.c#13".
The internal operation just processed is "----".
The internal session was started at 20071010112314.
Please help me to find out the problem and fix the problem.
ThanksHi,
This is O/S kernel issue and needs to be checked with the SAP Admin , who will check the installation of both O/S and the SAP software and can help you out in a better manner.
Thanks,Rams.
Maybe you are looking for
-
Switchable Graphic Problem AMD & Windows 8.1- Solved
Follow the steps accurately 1. Open This Pc or My Computer and then go to Uninstall or change a program 2. As the list is displayed, you will see Intel Graphic Driver & AMD Catalyst install manager. You have to uninstall it both in express mode so th
-
Dbms_rls.add_policy with Oracle 10g Express Edition
SQL> begin 2 dbms_rls.add_policy( 3 object_schema => 'VPD', 4 object_name => 'TRANSACTIONS', 5 policy_name => 'VPD_TEST_POLICY', 6 function_schema => 'VPD', 7 policy_function => 'VPD_POLICY.VPD_PREDICATE', 8 statement_types => 'select, insert, update
-
Replace of FM 'HELP_VALUES_GET_WITH_TABLE' in ECC 6.0
Hi Friends, As iam working in the upgradation project,I wanted to know which function module is replaced in ecc 6.0 for the FM 'HELP_VALUES_GET_WITH_TABLE' that is used in 4.6c
-
Re: How to create More two class with one object
haii, i have small information How to create More two class with one object, bye bye babu
-
The portfolio of Acrobat Pro / ext can handle multiple file formats. I try to sign a whole portfolio with diffrent file types but the the Advanced>sign & certify is greyed-out. However it is possible to encrypt the portfolio which is on the same subj