Data Load error Please respond ASAP

Hi ,
When i am trying to load data for year 07 using rule files its showing an error and aborting the data load
Error Msg " Data Value [2007] Encountered before all dimensions Selected,[5] Records Completed"
Any help greatly appreciated.
Thanks

Key here is that 5 records were loaded before failing on the 6th, indicating it's not a header issue on the load rule.
Check the first 5 records and see how the column containing 2007 differs between them and the failing 6th record. Perhaps the 6th record has a null (as indicated eariler) or prehaps 2007 is not the name of the member in the outline.
I have had both issues give similar error results.
J

Similar Messages

IPod nano problems! PLEASE RESPOND ASAP!!

HELP!
A couple days ago I had to re-format the computer due to a virus. I didn't save any of the songs that were on iTunes. That night I listened to some songs on my iPod. The next day I plugged it in my computer for it to charge. When it was done charging, I went to listen to some songs but there were NO SONGS ON IT!! I have no clue what happened... has this happened to anyone? Does anyone know how to fix it? Please respond ASAP!
Thanks,
Molly =)
Windows XP

Hi Molly,
Welcome to Apple Discussions
Copying songs from your iPod to your computer
"The iTunes library on your computer holds all the songs you've encoded from your CD collection or purchased from the iTunes Music Store. With default settings, iTunes automatically copies the songs in your library to your iPod. When you use your iPod as a hard disk, you can't see the songs iTunes copies to your iPod in the Finder or My Computer. This is normal. Using the Finder or My Computer, you can't copy these song files from your iPod back to iTunes or to any other computer. The synchronization between your iPod and your computer is always one way: from iTunes to iPod.
If you've erased the music library on your computer, there's no way to use the Finder or My Computer to copy the songs from your iPod to reconstitute the library on your computer. One solution is to encode the songs from your CD collection again, then sync your new library with iPod. If you purchased songs from the iTunes Music Store and didn't back them up, there's no way to download them again. You'll have to buy new copies of the songs."
Taken from Using your iPod as a hard disk
So even if there were any tracks on your iPod, Apple has set it so you shouldn't be able to get them back.
You need to reload iTunes with music, and then get into the habit of backing them up as well. Once you've done that you can start loading onto the nano.
To help with backing up your music this link will explain what the files are:
What are the iTunes library files?
If you have problems with your nano here is a useful link:
The 5 Rs: Reset, Retry, Restart, Reinstall & Restore
Regards
Colin R.

Data load error regarding timestamp

Hi All,
I am getting data load error related to time.
I am using 2lis_02_SCN for CNFTM(time stamp) filed
with value "08:00:" need to convert to 08:00:00...for some records and rest of the records are coming with normal 6 digit time.
please send your suggestion as early as possible.
Thanks
Rupa

Hi Rupa,
Try out following sample code inthe transfer rule for the same info object and it should work
lv_len = strlen( str ).
if lv_len = 4.
concatenate str '00' into str.
endif
Regards
Kapadia

Flat file data loading error using process chain

Hi SAP Experts,
I am having a problem loading the flat file data to the cube using process chain. The issue is that when i run the process chain it fails giving the message " Date format error, please enter the date in the format _.yyyy" . I am using " 0calmonth in the datasource" . Strange is that when i manually execute the infopackage, i dont get any errors and am able to load the same file successfully to the dso and the cube. Is there any special setting for the process chain that i am missing?
The date format in the flat file is mm/yyyy. I have tried all the options i could including recreating the datasource and invain dont see any success so far. please help me solving this problem as we r in the middle of testing cycle.
Thanking you all for your quick response and support all the time.
Kind Regards,
Sanjeev

Hi Sanjeev,
I believe you are opening the .csv file again after saving it. In this case the initial 0 in single digit month (say 02/2010) is getting changed to 2/2010 and the resulting file is not readable to the system. Just do not open the file after you have entered data in the .csv file and saved and closed it. If required, open the file in notepad, but not in excel in case you want to re-check the data.
Hope this helps.
regards,
biplab

Most common BW data load errors in production and how to solve them ..

Hi All,
Most common BW data load errors in production and how to solve them ..
Any doc on it ,if so plz send it across to this id [email protected]
Thanks in advance.
Rgrds
shoba

hi
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light error message:
Master data/text of characteristic 'so and so' already deleted .
9) extraction job aborted in r3
10) request couldnt be activated because theres another request in the psa with a smaller sid
11) repeat of last delta not possible
12) datasource not replicated
13) datasource/transfer structure not active ´
14) Idoc Or Trfc Error
15. ODS Activation Error

What are the frequent data load errors in production support?

what are the frequent data load errors in production support?

It is a long list. Here is some of them.
1. Idoc not arriving from source system.
2. previous processes failed.
3. change run unsucessful or did not run properly and data in master data is messed up.
4. invalid characteristics in the data.
5. Duplicate records found.
and on and on.
Ravi Thotahdri

I am updating creative cloud but under apps tab says failed to load error please retry but still will not work

i am updating creative cloud but under apps tab says failed to load error please retry but still will not work

Hi philip,
You may try to follow the steps below:
1.Close the Creative Cloud application.
2.Navigate to the OOBE folder.
Windows: [System drive]:\Users\[user name]\AppData\Local\Adobe\OOBE
Mac OS: /Users/[user name]/Library/Application Support/Adobe/OOBE folder
3.Delete the opm.db file.
4.Launch Creative Cloud.
Let us know if that helps,
Regards,
Rave

Data Loading Error : ToomanyError records.

Hi All,
I got Data Loading error when I am loading from Flat File.
Following is the error message :
Too many error records - update terminated
Error 18 in the update
No SID Found for value '00111805' of Characterstic ZUNIQUEID (Message No 70)
can anybody help in resolving the issue.
Regards,
Chakravarthy

hi
Check the format of your charecteristics and key figures .
Check you put data separators in you flat files approriately
In the particular charecteristics ZUNIQUEID ,ensure data is consistent...check the related tables
Assign points if useful
Regards
N Ganesh

Common data load errors in BI 7

Hi , i would appreciate if any one can provide me a list with most common Data load errors effecting both master and transactional data in SAP BI 7 or BW 3.5..

Hi AAL,
There're lots of loading error posts in this forum. This one I guess is good for you:
production support errors
production support issues
Or you can search yourself using key word common load error etc.
Hope above helps.
Regards,
Frank

Sap bw 7.3 master data load error

sap bw 7.3 master data load error
erroe: Exception in Substep Rules

Hi Jayram,
I am assuming that you are getting this error when you are loading data from PSA to IO. If so, the error might be because of
1. Duplicate records
PSA might have duplicate records. But you will be able to load only one record to Master data IO. In DTP Update tab, there is an option for "Handle Duplicate Record Keys" . Just enable this & try to load again.
2. Erroneous records.
Some special reocrds are allowed in PSA where as thye might not be allowed in Master Data/Data Targets like Lower case letters/ some speacial characters etc. If error is because of this, then you might need to correct the data at PSA level & reload the data to Master data. Else get it corrected in source system itself & fetch the data to BW. Or write some code to take care of these special characters.
Hope it helps!
Regards,
Pavan

Data load error--urgent

hi friends ,
we are geting data load error as; Process 000087 for deterermined fro infoobject DUVTYPE started in STATUS TAB and in DETAILS TAB update(251new/160 chnaged): Errors occured.
what should i know from information and what are the reasons for this load failure and possible rectification methods.
This load is through process chains and aslo a delta load.
Can i delete the request and start the infopackage manually? also will it make my Process chain Green automatically or should i repeat from the subsequent process?
Plz help.
I award points.
regards,
siddartha

Hi siddharta,
look in the details of the monitor to see the error. Be very cautious with deltas! They can not be repeated every time. it depends on the datasource! What you can do is delete the failed request from all(!) the data targets meanwhile!
Regards,
Jzergen

CX_RSR_X_MESSAGE Data load error in Quality system

Hi
We are on BI.7 and trying to load Technical content data for first time in Quality system .
We get the following error :
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_RSR_X_MESSAGE
for all the technical content data load.
The other data loads are working fine in the quality system.
We searched a lot on the forum and got various solutions like try out note 615389, 963760 etc.. But none of them are working fine for us.
Please suggest.
Thanks you for your help.
Gaurav

Hi
The error log is as follows -
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_RSR_X_MESSAGE
Date and Time          23.01.2009 10:06:08
Short text
     An exception occurred that was not caught.
What happened?
     The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
      along
     the call hierarchy.
     Since exceptions represent error situations and this error was not
     adequately responded to, the running ABAP program 'SAPLRRMS' has to be
     terminated.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
     and
    therefore caused a runtime error.
    The reason for the exception is:
    No text available for this exception
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
    "SAPLRRMS" or "LRRMSU13"
    "RRMS_X_MESSAGE"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
It gives a error in the last step of executing infopackage wherein the data is to be updated to the infocube.
I checked with Basis team. There is no tablespace problem as well.
Regards
Gaurav

Data Loading Error for cube 0TCT_C22

Dear Colleagues,
I am working on BI 7.0 / SP09.
I am loading technical content cube 0TCT_C22 from datasource 0TCT_DS22. Till PSA, there is no problem with data load. But from PSA to data target, data load fails. Went to monitor and it shows teh error "Error calling number range object 0TCTPRCSCHN for dimension D2 ( ). Message no: RSAU023".
I tried to find the SAP notes fro this, but no success. Also checked the Dump and application logs, but nothing is there.
Please advice ASAP.
Regards
PS

Hi Pank,
I just solved the very similar issue. Try what I did to see if it works for you. For each dimension in each Infocube a number range is created. For some weird reason during the activation of the Infocube the number range for the dimension giving troubles was not created. Look for it in TCODE SNRO and you should find a number range per each dimension in the cube but the one giving you error.
To solve it, (the easiest way I found) just add any characteristic to the problematic dimension. Activate the Infocube. After that, modify again you Infocube and remove the characteristic you just added to leave the dimension how you need it. Activate the Infocube again. By doing that you will force the regeneration of the dimension and with it the number range. You can chek in TCODE SNRO and the number range should be there. Try loading your data again and it should work.
One thing I don't understand is why that number range sometimes is not created during activation
Good luck, I hope you can solve it!!!
Regards,
Raimundo Alvarez

Data load eoor , ple solve asap

hi
i am getting this error please let me know solutions
in details tab getting this error also
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Non-updated Idocs found in Business Information Warehouse
Diagnosis
IDocs were found in the ALE inbox for Business Information Warehouse that are not updated.
Processing is overdue.
Error correction:
Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
ple let me know ans
can i goto sm58 and run luw for both r/3 and idoc ?
regards
suneel.

Hi,
In RSMO, select the particular load you want to monitor.
In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
In the next screen you can select the Execute button and the IDOCS will be displayed.
Check Note 561880 - Requests hang because IDocs are not processed.
OR
Transact RFC - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
Hope this helps.
Thanks,
JituK

Data loading error - processing terminated

Hi Friends,
I am trying to load data in Master-data getting the following error when excuting the DTP.
Error :- Pocessing Terminated
at the processssing Request . when I checked display message it shows Message No :- RSBK223.
No other error message is displayed.
I am able to load data upto PSA means infopackage is running fine.
Above error is coming when i am executing DTP to load DSO, MASTER DATA, MASTER DATA TEXT.
Please suggest what to do ?
Regards,
RG

HI,
Transformation....PSA data all are correct.....
i am taking data from a flat file.... created a simple master data Material ID and loading it....
upto PSA i can see the values but when i am executing DTP it is failing with above mentioned error.
Not getting any clue.....
Please help...

Data Load error Please respond ASAP

Similar Messages

Maybe you are looking for