Data Load Error while Loading data in PSA

Hi All,
We have BI 7.0. While we are loading data from source system( SAP R/3) to the PSA in BW its giving the error.
Its giving the Error: Error occured in the source system and the request turns RED.
While We are able to Extarct data corectly in SAP R/3 through RSA3.
Pls Suggest.
Mayank

Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' for any datapacket in SM37.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
5) Check in SM58 and BD87 for pending tRFCs and IDOCS.
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
SM21 - System log can also be helpful.
Thanks,
JituK

Similar Messages

  • Error while staging materials into PSA

    Dear experts,
    in the following situation i try to stage materials of a production material request into my PSA. (Yes i am using the advanced production integration of EWM 9.2 )
    When i am executing transaction /SCWM/STAGE the following protocol is given:
    Does anyone know, what kind of configuration is missing ? Or other ideas what causes this error has ?
    Best regards
    Eike

    Hi irfan,
    the WT creating error just exists because of the stock determination error..
    Your tip to check the availability groups, was really good. Here are my configurations:
    Defined availability Groups:
    The non-location-dependent stock type:
    The Stock Type configuration:
    And the configuration of the storage type which my bin of the PSA belongs to:
    Do you have any idea what else could be the mistake ? Or is something wrong with my configurations?
    Kind regards

  • Error while loading data from PSA to DSO using DTP

    Hi,
    I have a Unique aplha numeric identifier of  type "Char" length "32" . When I am loading the data from PSA to DSO using DTP I get the following error message:
    "An error occurred while executing a transformation rule:
    The exact error message is
    Overflow converting from ' '
    The error was triggered at the following point in the program:
    GP4JJHUI6HD7NYAK6MVCDY4A01V 425
    System response
    Processing the data record has been terminated"
    Any idea how I can resolve this....
    Thanks

    Hi,
    fist check weather any special characteristics if not
    check in data source under this we have fields tab check the format of a particular field format internal/external/check u choose internal format, if any check routine once
    use Semantic Groups in the DTP.
    Try  it
    Thanku
    lokeeshM
    Edited by: lmedaSAP_BI on Oct 20, 2010 6:44 AM

  • Error while loading data from PSA to DSO

    Hi,
    How to identify the erroneous records in DSO?
    While loading the data from PSA to DSO through Process chains we are facing the error says:
    "Value '#' (hex. '0023') of characteristic 0BBP_DELREF contains invalid characters"
    "Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0BBP_DELREF"
    There is no error records in PSA but it seems some invalid characters exists.
    Could you please help us how to find the error records in DSO and how to correct it.

    Hi,
    These are errors BRAIN290 & RSDRO302.
    The problem here most likely is that BW doesn't recognise a character you are trying to load. Generally the character is not "#",
    as BW displays all symbols it does not recognise as #. You should decode from the hex string what the actual value is. Note that hex values < 20 are not allowed in BW.
    Please review Note 173241 and the document mentioned within.
    This shows what characters are not allowed in BW characteristic values.
    You should check if the character is allowed, and then you can solve the problem in one of the following ways:
    1) add this character to the "permitted character" list in RSKC as described in the note.
    2) correct the value in the source system.
    3) correct the value in the PSA (to do this, you will need to delete the request from the ODS object and then you can change the disallowed character via the PSA maintenance).
    4) follow Note 1075403 so that the characters HEX00 to HEX1F are not checked (this affects only characteristics that do not allow "lower case").
    5) if you cannot use any of the above options, then you will need to create a routine in your transfer rules for the affected infoobject, and change the value to a character which is permitted in BW.
    These are the usual ways to solve this issue.
    Rgds,
    Colum

  • Error while loading the data from PSA to Data Target

    Hi to all,
         I'm spacing some error while loading the data to data target.
    Error :  Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
    Details:
    Requests (messages): Everything OK
    Extraction (messages): Everything OK
    Transfer (IDocs and TRFC): Errors occurred
          Request IDoc : Application document posted
          Info IDoc 2 : Application document posted
          Info IDoc 1 : Application document posted
          Info IDoc 4 : Application document posted
          Info IDoc 3 : Application document posted
          Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
    Processing (data packet): Errors occurred
          Update PSA ( 2462  Records posted ) : No errors
          Transfer Rules ( 2462  -> 2462  Records ) : No errors
          Update rules ( 2462  -> 2462  Records ) : No errors
          Update ( 0 new / 0 changed ) : Errors occurred
          Processing end : Errors occurred
    I'm totally new to this issue. please help to solve this error.
    Regards,
    Saran

    Hi,
    I think you are facing an invalid character issue.
    This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
    I will add the step by step procedure to edit PSA data and update into target (request based).
    In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
    Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
    Identifying incorrect records.
    System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
    1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
    2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
    3. Then you can go to PSA and filter using the incorrect records based on the particular field.
    4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
    If you want to confirm find the PSA table and search manually."
    Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
    Steps to resolve this
    1. Force the request to red in RSMO > Status tab.
    2. Delete the request from target.
    3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
    4.Edit the record
    5. Save PSA data.
    6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
    Refer how to Modify PSA Data
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
    This should solve your problem for now.
    As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
    RSKC --> type ALL_CAPITAL --> F8 (Execute)
    OR
    Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
    Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
    Refer
    /people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
    /people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
    /people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
    http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
    For adding Other characters
    OSS note #173241 – “Allowed characters in the BW System”
    Thanks,
    JituK
    Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

  • Error While loading the data into PSA

    Hi Experts,
           I have already loaded the data into my cube. But it doesn't have values for some fields. So again i modified the data in the flat file and tried to load them into PSA. But while starting the Info Package, I got an error saying that,
    "Check Load from InfoSource    
    Created       YOKYY  on   20.02.2008   12:44:33 
    Check Load from InfoSource , Packet IP_DS_C11
    Please execute the mail for additional information.
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    Pls help me in this......
    With Regards,
    Yokesh.

    Hi,
    After editing the file did you save the file and close it.
    This error may come if your file was open at the time of request.
    Also did you check the file path settings.
    If everything is correct try saving the infopackage once and loading again.
    Thanks,
    JituK

  • Urgent : Error while loading data from PSA to DSO

    Hi,
    I am working on 7.0.
    When i look for data into PSA then i have 1 date field which is containing data in proper date format. This date field is mapped with 0CALMONTH & 0CALYEAR for which i have written routine and directly assigned to 0DOC_DATE .
    I have written a start routine to do some modifications in SOURCE_PACKAGE.
    But When i am loading data from PSA to DSO its giving below error:
    " Exception wrong_date ; see long text RSTRAN 303
    Diagnosis
    An exception wrong_date was raised while executing function module
    RST_TOBJ_TO_DERIVED_TOBJ .
    System Response
    Processing the corresponding record has been terminated.
    Procedure
    To analyze the cause, set a break point in the program of the
    transformation at the call point of function module
    RST_TOBJ_TO_DERIVED_TOBJ . Simulate the data transfer process to
    investigate the cause. "
    I am not getting why this error is coming up
    pls guide me !!

    you can map the code to DOC_DATE .
    The code is used to read from any date and convert that into Fiscal year/period.
    Try this code.
    data: l_fiscyear type t009b-bdatj.
    call function 'FISCPER_FROM_CALMONTH_CALC'
    exporting
    id_date = COMM_STRUCTURE-doc_date
    iv_periv = 'V9'
    importing
    ev_fiscyear = l_fiscyear.
    result value of the routine
    RESULT = l_fiscyear.

  • Error while loading data from PSA to Infoobject through DTP(URGENT)

    Hi-
    I am running into an issue while loading the data from PSA to Infoobject.
    It says
    Data Package 1 : error during processing.
    Updating Attributes for Infoobject
    Error in substep
    Process Terminated
    Please let me know ur solution as this is very urgent....

    Data Package 1 : error during processing.
    This is the error when your flat file is opened at the time of scheduling. Pls close your flat file, will upload correctly.
    Let me know if you have any further query.

  • BI 7.0 - Error while loading data from R3 to PSA

    Hi,
    I transported Master Data ATTR/TEXT object from DEV to QA (BI 7.0 NW 2004s); and getting the following error while loading the data from R3 in to PSA using the InfoPackage.
    Any clue to resolve this issue is appreciated.
    Monitor - STATUS tab:
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Service API .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    Monitor - Details Tab:
    Extraction (messages): Errors occurred
    Error occurred in the data selection
    Request IDoc : Application document not posted
    Error Message:
    Diagnosis                                                                               
    In the source system, there is no transfer structure available for    
        InfoSource 0ACTIONTYPE_TEXT .                                                                               
    System Response                                                                               
    The data transfer is terminated.                                                                               
    Procedure                                                                               
    In the Administrator Workbench, regenerate from this source system the
        transfer structure for InfoSource 0COMPANY_TEXT .                                                                               
    Thanks,

    Hi,
    Pl try the below
    The l_dta data target that you want to load is an InfoObject (master data or text
    table).
    You must declare this for the InfoProvider in Transaction RSD1.
    You do this on the 'Master Data/Text' tab by assigning any InfoArea to the InfoObject.
    The InfoProvider (that is, this InfoObject) is then displayed below this InfoArea in
    the InfoProvider tree.
    Rregards,
    Senthil

  • While loading master data into PSA, the eorror is 'Error from PSA"

    Hi All,
    While loading master data into PSA, the eorror is 'Error from PSA"
    Could you anybody please help in this reagard.
    Thanx,
    Sridhar.

    Hi rakesh,
    May be IDOCs not processed completely,
    Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
    Cheers
    Raj

  • Error while loading data

    hi guys
    i got an error while loading infoobject atrributes
    i created characteristic info object "equipment" with Master data and text.
    when i loaded text it was working fine but the problem happened when i start
    loading attributes data.
    error code is as given below
    Check Load from InfoSource D92_EQUIP , Packet infpackage for equipment -attrib
    Please execute the mail for additional information.
    Data records were selected in the PSA
    Diagnosis
    Data records were marked as incorrect in the PSA.
    System response
    If error messages exist for the data records, the corresponding data packets were not updated using the PSA.
    Procedure
    Go into the PSA maintenance for the request and read the logged messages.
    You find the relevant messages for each record in the PSA table by double-clicking on the status of the record.
    Where necessary, edit the incorrect records or remove the error in another way.
    Post the incorrect data packets manually.
    Note that you are only permitted to edit and manually update the request if it is not contained in the request list in the InfoCube (see InfoCube administration). Where necessary, first delete it from the InfoCube.
    any advice ???its says problem with data records..but i couldnt find any
    regards
    abhi
    Message was edited by:
            Abhilash Muraleedharan

    Hi Abhilash,
    You can use the preview functionality in the external page to see if the reords are being pulled properly or not.
    If not then there is some problem with the file which you need to fix. Or might be the setting you have done in selecting the delimiter in BW or any setting. Also check your routines if you are using any.
    If the file is being pulled correctly try seeing the error message under the details tab in the monitor screen. That will give you an idea why the load is failing.
    Hope that helps.
    regards.

  • Error while loading data to Infocube using DTP.

    Dear All
    I am facing problem while uploading data in Zinfocube. Up to PSA the data is loaded and not showing any error but when we try to upload the data from PSA to INFOCUBE through a DTP, It ens up showing error message (Error while updating to targets Infocube) . The long text and details doesnot give any further information. I can't figure out what could be the reason....
    Thanks
    Dinesh Sharma

    Hi
    The data might be mismatched between PSA and Cube or might be the problem in the transformation. We cannot really say what the problem until you tell the error msg.
    There will be some error message in DTP monitor
    Regards
    Srikanth

  • Error while data loading

    Hi Gurus,
    I am getting error while data loading. At BI side when I  check the error it says Background Job Cancelled and when I check in R3 side I got the following error
    Job started
    Step 001 started (program SBIE0001, variant &0000000065503, user ID R3REMOTE)
    Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
    DATASOURCE = 2LIS_11_V_ITM
             Current Values for Selected Profile Parameters               *
    abap/heap_area_nondia......... 2000683008                              *
    abap/heap_area_total.......... 4000317440                              *
    abap/heaplimit................ 40894464                                *
    zcsa/installed_languages...... ED                                      *
    zcsa/system_language.......... E                                       *
    ztta/max_memreq_MB............ 2047                                    *
    ztta/roll_area................ 6500352                                 *
    ztta/roll_extension........... 3001024512                              *
    4 LUWs confirmed and 4 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
    ABAP/4 processor: DBIF_RSQL_SQL_ERROR
    Job cancelled
    Please help me out what should I do.
    Regards,
    Mayank

    Hi Mayank,
    The log says it went to short dump due to temp space issue.as its the source system job ,check in the source system side for temp table space and also check at the BI side as well.
    Check with your basis regarding the TEMP PSA table space - if its out of space ask them to increase the table space and try to repeat the load.
    Check the below note
    Note 796422 - DBIF_RSQL_SQL_ERROR during deletion of table BWFI_AEDAT
    Regards
    KP
    Edited by: prashanthk on Jul 19, 2010 10:42 AM

  • Error in loading data from PSA to masterdataTables by using ProcessManually

    Hello,
    While loading Attribute master data to Masterdata tables, the data is loaded successfully to PSA but when I clicked process manually tab in the monitor screen to load the Attribute master data to Masterdata tables it is showing error.
    Can anyone pls help me in solving this issue.
    Thanks,
    Soujanya

    Hi Soujanya,
    If it is a SAP BI 7 data flow, in order to load data from PSA to the InfoObject master data tables, you have to run the corresponding DTP.
    On the other hand, if it is a SAP BW 3.x data flow, the InfoPackage should be configured so as to update data to subsequent targets (that is to say, the InfoObject).
    Finally, take into account that if the DataSource provides duplicate records, the DTP or the InfoPackage (depending on the dataflow version) should be configured in order to deal with it.  Otherwise, you could receive error messages during data load.
    I hope this helps you.
    Regards,
    Maximiliano

  • Error when loading the data from PSA to ODS......

    Hi BW guru's,
    i am facing one problem while loading the data from PSA to ODS.so please help me in this regard.
    Please give a step by step guidelines for me...
    the error while loading the data from PSA to ODS is "There are no PSA tables for these selection criteria","An error occurred when reading PSA data".
    thanks in advance,
    ashok.

    hi ashok,
    u can push data from  psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
                                                 or
    In ods > delete the failed request>goto the processing tab-->select 3rd option   " psa and then subsequentially to data targets ", --> schedule the infopackage.
    bye
    sunil

  • Error while loading master data.

    I am facing error while loading master data in a infoobject.
    The error comes when I run DTP fo rloading data from PSA to infoobject.
    The error wordings are : "MCK_PRDT1 : Data record 1 ('Bleach '): Version 'Bleach ' is not valid"
    Please help me in understanding this Version errror and suggest a solution for this.

    SAP metodology integration MDM & BW you can look at:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0f1f135-0015-2b10-5e83-acca118e17aa
    You can turn matching strategy in MDM Data manager for delete dublicate of records
    and then use MDM Syndicator for export data to file and then load that file to BW
    If you use OHD you cannot load from BW to MDM repository 10 records and unload only 5 because
    in BW every record has unique key.
    also you can use MDM ABAP or Java API for delete dublicate of records
    Edited by: Kanstantsin Chernichenka on May 8, 2009 1:02 PM

Maybe you are looking for