Data load failed
While loading data from DSO its going to a dump
ASSIGN_TYPE_CONFLICT
The current ABAP program "GP48SR6V718MFXK37DXEP6N3VOT" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
Error analysis
You attempted to assign a field to a typed field symbol,
but the field does not have the required type.
I feel activating the transformation will help.But i'm in quality system.Is tehre any program to do taht?
Reagrds,
ANita
Check the the assigments in Transformation for the fields.
There may be a source field with a data type which is not matching the target field data type in infoprovider .
Please check the datasource .Click the field tab and check the data type and length of all the fields.match them with the source fields.
Also refer: /thread/261418 [original link is broken]
If none of the above works than,
Re-activate Data targets.
Re-activate transformation rules.
Delete DTP and recreate it.
Edited by: sam hennry on Mar 3, 2008 9:24 AM
Similar Messages
-
Data load failed while loading data from one DSO to another DSO..
Hi,
On SID generation data load failed while loading data from Source DSO to Target DSO.
Following are the error which is occuuring--
Value "External Ref # 2421-0625511EXP " (HEX 450078007400650072006E0061006C0020005200650066
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
So, i'm not getting WHY in one DSO i.e Source it got successful but in another DSO i.e. Target its got failed??
While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
Please explain..
Thanks,
SnehaHi,
I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO. By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.
Please analyze the following
Have you loaded masterdata before transaction data ... if no please do it first
go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
this may be the reason.
Also check whether there is any special char involvement in your transaction data (even lower case letter)
Regards
BVR -
Data load failing with a short-dump
Hello All,
There is a data load failing with the following short-dump:
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_FOEV_ERROR_IN_FUNCTION
Full text:
"UNCAUGHT_EXCEPTION" CX_FOEV_ERROR_IN_FUNCTIONC
"CL_RSAR_FUNCTION==============CP" or "CL_RSAR_FUNCTION==============CM004"
"DATE_WEEK"
It seems as if it is failing in a function module - please advise.
Regards,
Keith KibuukaDid you read OSS [Note 872193 - Error in the formula compiler|https://service.sap.com/sap/support/notes/872193] or OSS [Note 855424 - Runtime error UNCAUGHT_EXCEPTION during upload|https://service.sap.com/sap/support/notes/855424]
Regards -
Alert Message When Data Load Fails
Hi Friends,
I have three process chains(p1,p2,p3)and all for transactional data loading(psa-ods-cube).suppose whenever data load fails,it sends message to my company mail id. is there any functionality to do like this.
i am not much aware of RSPCM(Process Chain Monitor).if anyone knows. tell me how much does it support my requirement?
thank in advance
samhi Sam,
welcome to sdn ...
you can add 'create message' by right click the process type, this will lead you to mail sending setting.
see thread
Getting Failed process chain info through email
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0afcd90-0201-0010-b297-9184845346ca
you may need to setup sapconnect for email, take a look
http://help.sap.com/saphelp_webas620/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_webas620/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
hope this helps. -
Data load fails from DB table - No SID found for value 'MT ' of characteris
Hi,
I am loading data into BI from an external system (oracle Database).
This system has different Units like BG, ROL, MT (for Meter). While these units are not maintaned in R3/BW. They are respectively BAG, ROLL, M.
Now User wants a "z table" to be maintained in BW, which has "Mapping between external system Units and BW units".
So that data load does not fail. Source system will have its trivial Units, but at the time of loading, BW Units are loaded.
For example -
Input Unit (BG) -
> Loaded Unit in BW (BAG)
Regards,
Saurabh T.Hello,
The table T006 (BW Side) will have all the UOM, only thing is to make sure that all the Source System UOM are maintained in it. It also have fields for Source Units and target units as you have mentioned BG from Source will become BAG. See the fields MSEHI, ISOCODE in T006 table
If you want to convert to other units then you need to implement Unit Conversion.
Also see
[How to Report Data in Alternate Units of Measure|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b7b2aa90-0201-0010-a480-a755eeb82b6f]
Thanks
Chandran -
Material Master Data load failed
Hi All,
I am loading material master data. I have around 8055 records in R/3. The load has failed with an error "Non-updated Idocs found in Business Information Warehouse" and asking me to process the IDocs manually. I have checked in WE05 for the IDocs and found 3 Idocs with status 64(IDoc ready to be transferred to application).
But when I checked in the manage screen of the 0MATERIAL I could find the Transfered and Updated records as 8055. I have even checked the data in 0MATERIAL and found that all the data(8055 records) has already been uploaded.
Why is it still showing an error(load failed) even when all the data has been uploaded? What should I do now?
Best Regards,
Nene.hi Nene/Sankar,
for material text no language please check Note 546346 - Material texts: no selection on languages
and for why idocs problem, check e.g Note 561880 - Requests hang because IDocs are not processed, Note 555229 - IDocs hang in status 64 for tRFC with immediate processing.
hope this helps.
Note 546346 - Material texts: no selection on languages
Summary
Symptom
When loading material texts from R/3 into the Business Information Warehouse, you cannot select languages.
Other terms
DataSource, 0MATERIAL_TEXT, InfoSource, InfoObject, 0MATERIAL, SPRAS, LANGU, 0LANGU, MAT_BW, extraction, selection field, delta extraction, ALE, delta, change pointer
Reason and Prerequisites
As of PI/PI-A 2001_2 Support Package 6, the selection option for the 'SPRAS' field in the OLTP system was undone in the 0MATERIAL_TEXT DataSource. (Refer here to note 505952).
Solution
As of PI/PI-A 2002_1 Support Package 4, the 'SPRAS' field is provided for selection again with the 0MATERIAL_TEXT DataSource in the OLTP system. When loading the material texts from BW, the language is still not provided for selection in the scheduler, instead all languages of the language vector in BW are implicitly requested from the source system. However, during the delta update in the source system, the change pointers for all languages in the source system are now set to processed, regardless of whether the language was requested by BW or not.
Import
Support Package 4 for PI/PI-A 2002_1_31I - PI/PI-A 2002_1_45B
Support Package 4 for PI 2002_1_46B - PI 2002_1_46C
Support Package 3 for PI 2002_1_470
In transaction RSA5, copy the D version of the 0MATERIAL_TEXT DataSource to the A version.
Then replicate the DataSources for 0MATERIAL in the BW system. The 'SPRAS' field is then flagged again as a selection field in the transfer structure of the 0MATERIAL InfoSource. The transfer rules remain unchanged. Activate the transfer rules and perform a delta initialization again.
Note 561880 - Requests hang because IDocs are not processed
Symptom
Data extraction in a BW or SEM BW system from an external OLTP System (such as R/3) or an internal (via DataMart) OLTP System hangs with the 'Yellow' status in the load monitor.
After a timeout, the request status finally switches to 'Red'.
Information IDocs with the status '64' are displayed in the 'Detail' tab.
Other terms
IDoc, tRFC, ALE, status 64
Reason and Prerequisites
Status information on load requests is transferred in the form of IDocs.
IDocs are processed in the BW ALE model using tRFC in online work processes (DIA).
IDoc types for BW (RSINFO, RSRQST, RSSEND) are processed immediately.
If no free online work process is available, the IDocs remain and must then be restarted to transfer the request information.With the conversion to asynchronous processing, it can often happen that no DIA is available for tRFC for a short period of time (see note 535172).
The IDoc status 64 can be caused by other factors such as a rollback in the application updating the IDocs. See the relevant notes.
Furthermore, you can also display these IDocs after the solution mentioned below, however, this is only intended as information.
You must therefore analyze the status text.
Solution
We recommend asynchronous processing for Business Warehouse.
To do this, you need the corrections from note 535172 as well as note 555229 or the relevant Support Packages.
The "BATCHJOB" entry in the TEDEF table mentioned in note 555229 is generated automatically in the BW system when you import Support Package 08 for BW 3.0B (Support Package 2 for 3.1 Content).For other releases and Support Package levels, you must manually implement the entry via transaction SE16.
Depending on the Basis Support Package imported, you may also have to implement the source code corrections from note 555229.
The following basic recommendations apply in avoiding bottlenecks in the dialog processing and checking of IDocs for BW:
1. Make sure there is always sufficient DIA, that is, at least 1 DIA more than all other work processes altogether, for example, 8 DIA for a total of 15 work processes (see also note 74141).
TIP: 2 UPD process are sufficient in BW, BW does not need any UP2.
2. Unprocessed Info IDocs should be processed manually within the request in BW;in the 'Detail' tab, you can start each IDoc again by selecting 'Update manually' (right mouse button).
3. Use BD87 to check the system daily (or whenever a problem arises) for IDocs that have not yet been processed and reactivate if necessary.
However, make sure beforehand that these IDocs can actually be assigned to the current status of requests.
TIP: Also check transaction SM58 for problematic tRFC entries.
IMPORTANT: Notes 535172, 555229 and the above recommendations are relevant (unless otherwise specified) both for BW and for SAP source systems. -
Hi Experts,
One of my master data full load failed, see the below erro message in status tab,
Incorrect data records - error requests (total status RED)
Diagnosis
Data records were recognized as incorrect.
System response
The valid records were updated in the data target.
The request was marked as incorrect so that the data that was already updated cannot be used in reporting.
The incorrect records were not written in the data targets but were posted retroactively under a new request number in the PSA.
Procedure
Check the data in the error requests, correct the errors and post the error requests. Then set this request manually to green.
can any one please give me solution.
Thanks
DavidHI,
I am loading the data from application server, i dont have R/3 for this load. and the below message is showing in status tab;
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
Thanks
David -
Hi All,
In my process data loading from source to target,for example iam loading 100 records ,in that 50th record having error,once the error record occured total loading process want to fail, records needs to rollback and error record need to move error table....any one can you guide on this process...
Thanks in advance....30021986 wrote:
Hi All,
In my process data loading from source to target,for example iam loading 100 records ,in that 50th record having error,once the error record occured total loading process want to fail, records needs to rollback and error record need to move error table....any one can you guide on this process...
Thanks in advance....Hi ,
Test this ..
Set flow control to YES
Set Maximum number of errors allowed to 0 (zero)
Run the interface -
Data Load Fails due to duplicate records from the PSA
Hi,
I have loaded the Master Data Twice in to the PSA. Then, I created the DTP to load the data from the PSA to the InfoProvider. The data load is failing with an error "duplicate key/records found".
Is there any setting that I can configure by which even though I have duplicate records in PSA, I can be successfully able to load only one set of data (without duplicates) in to the InfoProvider?
How can I set up the process chains to do so?
Your answer to the above two questions is appreciated.
Thanks,Hi Sesh,
There are 2 places where the DTP checks for duplicates.
In the first, it checks previous error stacks. If the records you are loading are still contained in the error stack of a previous DTP run, it will throw the error at this stage. In this case you will first have to clean up the previous error stack.
The second stage will clean up duplicates across datapackeages, provided the option is set in your datasource. But you should note that this will not solve the problem if you have duplicates in the same datapackage. In that case you can do the filtering yourself in the start routine of your transformation.
Hope this helps,
Pieter -
Data load failed at infocube level
Dear Experts,
I hve data loads from the ECC source system for datasource 2LIS_11_VAITM to 3 different datatargets in BI system. the data load is successful until PSA when comes to load to datatargets the load is successful to 2 datatargets and failed at one data target i.e. infocube. I got the following error message:
Error 18 in the update
Diagnosis
The update delivered the error code 18 .
Procedure
You can find further information on this error in the error message of
the update.
Here I tried to activate update rules once again by excuting the program and tried to reload using reconstruction fecility but I get the same error message.
Kindly, please help me to analyze the issue.
Thanks&Regards,
MannuHi,
Here I tried to trigger repeat delta in the impression that the error will not repeat but then I encountered the issues like
1. the data load status in RSMO is red but where as in the data target the status is showing green
2. when i try to analyze psa from rsmo Tcode PSA is giving me dump with the following.
Following analysis is from Tcode ST22
Runtime Errors GETWA_NOT_ASSIGNED
Short text
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSLVC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
You attempted to access an unassigned field symbol
(data segment 32821).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"GETWA_NOT_ASSIGNED" " "
"SAPLSLVC" or "LSLVCF36"
"FILL_DATA_TABLE"
Here I have activated the include LSLVCF36
reactivated the transfer rules and update rules and retriggered the data load
But still I am getting the same error...
Could any one please help me to resolve this issue....
Thanks a lot,
Mannu
Thanks & Regards,
Mannu -
Infocube data loads fail with UNCAUGHT_EXCEPTION dump after BI 7.01 upgrade
Hi folks,
We're in the middle of upgrading our BW landscape from 3.5 to to 7.01. The Support pack we have in the system is SAPKW70103.
Since the upgrade any of the data loads going to infocubes are failing with the following
ABAP dump UNCAUGHT_EXCEPTION
CX_RSR_COB_PRO_NOT_FOUND.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSR_COB_PRO_NOT_FOUND', was not
caught and
therefore caused a runtime error.
The reason for the exception is:
0REQUEST is not a valid characteristic for InfoProvider
Has anyone come accross this issue and if so any resolutions you adopted to fix this. Appreciate any help in this regard.
Thanks
Mujeebhi experts,
i have exactly the same problem.
But I can`t find a test for infoobjects in rsrv. How can I repair the infoobject 0REQUEST`?
Thx for all answers!
kind regards
Edited by: Marian Bielefeld on Jul 7, 2009 8:04 AM
Edited by: Marian Bielefeld on Jul 7, 2009 8:04 AM -
Data load failing in update rules
Hello All and happy New Year!!
Please provide assistance to solve this error - a full data load into an InfoCube is failing in the update rules with the error ABORT was set in the customer routine 9998".
Your assistance will be highly appreciated.
Regards,
KeithHi Keith,
You need to check the start routine in the update rules...this is what the message is referring to. You can also debug the update rules if you like...in the debugger screen search for 9998 to get to the Start Routine code.
Hope this helps... -
Time dependant Master data load fail (Invalid time interval)
Hi,
I have IO 0HRPOSITION which is time dependant master data.
When I load master data I have maintained from date 01.03.2007 to end date 01.12.999 in scheduler.
But there are some positions records in HR system which have from date less than 01.03.2007 and because of that master data load is failing everyday.
How I can load only those records which fall in-between from date 01.03.2007 to end date 01.12.999???
Thanks
PramodHi Pramod,
I think you can put a selection in the Infopackage.
Thanks -
Hi Gurus,
My master data load is failing because of this error.
Record 20 :0CAT_GROUP : Data record 20 ('000200000012 '): Version 'D $$OSS001 ' is not valid
I went back to PSA and found out that I have 6 error records with values $$OSS001 .
0CAT_GROUP is a attribute of master data object
I checked in the master data extractors.These values are coming from ECC .
Can some one tell me how to get rid of these values and reload to Masterdata without errors.i am using BW3.5
Anyhelp would be appreciated.
NeoYou probably have to make appropriate change in settings in RSKC to allow certain characters. Otherwise the best way will be stop these at source, if they are really 'bad' data.
You could also visit the link below:
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
alternatively, you can write routine in transfer rules/ transformation by using
CALL FUNCTION 'RSKC_ALLOWED_CHAR_GET' -
Process Chain Data load fail /send email is not woking
Hello Experts,
I have created a process chain for daily data load. And created a message variant to send an email if the data load fials, but it's not working. I am not sure what I am missing. Here are the step I did...
1. Right click on the Info Package in the process chain and select Create Message, select errors radio button and then created new variant.
2. In the variant screen, clicked on Maintain Recipient list and enter the Recipient names and mail options like express mail, send copy etc there and then saved.
Didn't select any under REcip type. Not sure whether it's needed.
I greatly appreciate your help.
Thanks
Ram
Message was edited by: Sri Vani
Solved by myself.
Thanks a lot.
Message was edited by: Sri Vanidid you configure the Basis process to send external emails and the automatic output process?
You could see this in tx SCOT
If there´s any record in tree (SAP SERVER)->INT->SMTP
Here.... if is not configured the automatic output you can manually send the emails.....
If this doesn´t works you need to talk to your basis support for the email basis configuration....
Regards -
Attribute data load fails for 0RPA_MARM Infoobject
Hi BW experts,
Attribute data load to the infoobject 0RPA_MARM(not a infoprovider) is on yellow status for long time and after it is throwing the below error
Runtime Errors :UNCAUGHT_EXCEPTION
Except : CX_RSR_X_MESSAGE
I checked the forums for this issue but got the solution for target as infoprovider.
Please suggest.
Regards,
Leo.Hi Leo,
Basically loading data into Master data Infoobject and making it InfoProvider are two different things. Loading data in Master data infoobject will be same for all the Infoobjects and when you make them as Infoprovider you will get an advantage of doing reporting directly on top of that Infoobject.
Regards,
Durgesh.
Maybe you are looking for
-
Adding data to the formula log or package log
Is it possible to add data to the package or formula log? I have create a package to load and process a file into a dimension file, but there is also transformation and record checking in the package, so it is possible records will be rejected (dupli
-
Create a new File from java code
Hi, I'd like to create a new File on IFS, using Java code. Moreover, this file will be an image file, and I'd like to store meta data with this file... and then execute a search on this meta data. I know it must not be very difficult to do, but I can
-
IMac 10.5.8 Crashes upon sleep
Frequently, when my computer either goes to sleep as scheduled, or when I put it to sleep via the Apple pull-down menu, the screen goes black but the mouse light & fans stay on, and the computer will not respond. The computer has to be shutdown and
-
File name used by plug-in for saving the image file.
I have a program that creates a web page that has an object tag with a call to a program and that program delivers a PDF file. When my users want to save that image the name of the image is a random name. Is there any way to make the plug-in, Adobe
-
Re: Satellite L300D-13S - WLan doesn't work using Vista
I have a L300D-13S which came with Visa Home Premium on it. Its working fine APART from the wireless which refuses to work. I always get "Wireless association failed because Windows did not receive any response from the wireless router or access poin