Data load failing in update rules
Hello All and happy New Year!!
Please provide assistance to solve this error - a full data load into an InfoCube is failing in the update rules with the error ABORT was set in the customer routine 9998".
Your assistance will be highly appreciated.
Regards,
Keith
Hi Keith,
You need to check the start routine in the update rules...this is what the message is referring to. You can also debug the update rules if you like...in the debugger screen search for 9998 to get to the Start Routine code.
Hope this helps...
Similar Messages
-
Data load failed while loading data from one DSO to another DSO..
Hi,
On SID generation data load failed while loading data from Source DSO to Target DSO.
Following are the error which is occuuring--
Value "External Ref # 2421-0625511EXP " (HEX 450078007400650072006E0061006C0020005200650066
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
So, i'm not getting WHY in one DSO i.e Source it got successful but in another DSO i.e. Target its got failed??
While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
Please explain..
Thanks,
SnehaHi,
I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO. By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.
Please analyze the following
Have you loaded masterdata before transaction data ... if no please do it first
go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
this may be the reason.
Also check whether there is any special char involvement in your transaction data (even lower case letter)
Regards
BVR -
Data load failing with a short-dump
Hello All,
There is a data load failing with the following short-dump:
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_FOEV_ERROR_IN_FUNCTION
Full text:
"UNCAUGHT_EXCEPTION" CX_FOEV_ERROR_IN_FUNCTIONC
"CL_RSAR_FUNCTION==============CP" or "CL_RSAR_FUNCTION==============CM004"
"DATE_WEEK"
It seems as if it is failing in a function module - please advise.
Regards,
Keith KibuukaDid you read OSS [Note 872193 - Error in the formula compiler|https://service.sap.com/sap/support/notes/872193] or OSS [Note 855424 - Runtime error UNCAUGHT_EXCEPTION during upload|https://service.sap.com/sap/support/notes/855424]
Regards -
Alert Message When Data Load Fails
Hi Friends,
I have three process chains(p1,p2,p3)and all for transactional data loading(psa-ods-cube).suppose whenever data load fails,it sends message to my company mail id. is there any functionality to do like this.
i am not much aware of RSPCM(Process Chain Monitor).if anyone knows. tell me how much does it support my requirement?
thank in advance
samhi Sam,
welcome to sdn ...
you can add 'create message' by right click the process type, this will lead you to mail sending setting.
see thread
Getting Failed process chain info through email
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0afcd90-0201-0010-b297-9184845346ca
you may need to setup sapconnect for email, take a look
http://help.sap.com/saphelp_webas620/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_webas620/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
hope this helps. -
Material Master Data load failed
Hi All,
I am loading material master data. I have around 8055 records in R/3. The load has failed with an error "Non-updated Idocs found in Business Information Warehouse" and asking me to process the IDocs manually. I have checked in WE05 for the IDocs and found 3 Idocs with status 64(IDoc ready to be transferred to application).
But when I checked in the manage screen of the 0MATERIAL I could find the Transfered and Updated records as 8055. I have even checked the data in 0MATERIAL and found that all the data(8055 records) has already been uploaded.
Why is it still showing an error(load failed) even when all the data has been uploaded? What should I do now?
Best Regards,
Nene.hi Nene/Sankar,
for material text no language please check Note 546346 - Material texts: no selection on languages
and for why idocs problem, check e.g Note 561880 - Requests hang because IDocs are not processed, Note 555229 - IDocs hang in status 64 for tRFC with immediate processing.
hope this helps.
Note 546346 - Material texts: no selection on languages
Summary
Symptom
When loading material texts from R/3 into the Business Information Warehouse, you cannot select languages.
Other terms
DataSource, 0MATERIAL_TEXT, InfoSource, InfoObject, 0MATERIAL, SPRAS, LANGU, 0LANGU, MAT_BW, extraction, selection field, delta extraction, ALE, delta, change pointer
Reason and Prerequisites
As of PI/PI-A 2001_2 Support Package 6, the selection option for the 'SPRAS' field in the OLTP system was undone in the 0MATERIAL_TEXT DataSource. (Refer here to note 505952).
Solution
As of PI/PI-A 2002_1 Support Package 4, the 'SPRAS' field is provided for selection again with the 0MATERIAL_TEXT DataSource in the OLTP system. When loading the material texts from BW, the language is still not provided for selection in the scheduler, instead all languages of the language vector in BW are implicitly requested from the source system. However, during the delta update in the source system, the change pointers for all languages in the source system are now set to processed, regardless of whether the language was requested by BW or not.
Import
Support Package 4 for PI/PI-A 2002_1_31I - PI/PI-A 2002_1_45B
Support Package 4 for PI 2002_1_46B - PI 2002_1_46C
Support Package 3 for PI 2002_1_470
In transaction RSA5, copy the D version of the 0MATERIAL_TEXT DataSource to the A version.
Then replicate the DataSources for 0MATERIAL in the BW system. The 'SPRAS' field is then flagged again as a selection field in the transfer structure of the 0MATERIAL InfoSource. The transfer rules remain unchanged. Activate the transfer rules and perform a delta initialization again.
Note 561880 - Requests hang because IDocs are not processed
Symptom
Data extraction in a BW or SEM BW system from an external OLTP System (such as R/3) or an internal (via DataMart) OLTP System hangs with the 'Yellow' status in the load monitor.
After a timeout, the request status finally switches to 'Red'.
Information IDocs with the status '64' are displayed in the 'Detail' tab.
Other terms
IDoc, tRFC, ALE, status 64
Reason and Prerequisites
Status information on load requests is transferred in the form of IDocs.
IDocs are processed in the BW ALE model using tRFC in online work processes (DIA).
IDoc types for BW (RSINFO, RSRQST, RSSEND) are processed immediately.
If no free online work process is available, the IDocs remain and must then be restarted to transfer the request information.With the conversion to asynchronous processing, it can often happen that no DIA is available for tRFC for a short period of time (see note 535172).
The IDoc status 64 can be caused by other factors such as a rollback in the application updating the IDocs. See the relevant notes.
Furthermore, you can also display these IDocs after the solution mentioned below, however, this is only intended as information.
You must therefore analyze the status text.
Solution
We recommend asynchronous processing for Business Warehouse.
To do this, you need the corrections from note 535172 as well as note 555229 or the relevant Support Packages.
The "BATCHJOB" entry in the TEDEF table mentioned in note 555229 is generated automatically in the BW system when you import Support Package 08 for BW 3.0B (Support Package 2 for 3.1 Content).For other releases and Support Package levels, you must manually implement the entry via transaction SE16.
Depending on the Basis Support Package imported, you may also have to implement the source code corrections from note 555229.
The following basic recommendations apply in avoiding bottlenecks in the dialog processing and checking of IDocs for BW:
1. Make sure there is always sufficient DIA, that is, at least 1 DIA more than all other work processes altogether, for example, 8 DIA for a total of 15 work processes (see also note 74141).
TIP: 2 UPD process are sufficient in BW, BW does not need any UP2.
2. Unprocessed Info IDocs should be processed manually within the request in BW;in the 'Detail' tab, you can start each IDoc again by selecting 'Update manually' (right mouse button).
3. Use BD87 to check the system daily (or whenever a problem arises) for IDocs that have not yet been processed and reactivate if necessary.
However, make sure beforehand that these IDocs can actually be assigned to the current status of requests.
TIP: Also check transaction SM58 for problematic tRFC entries.
IMPORTANT: Notes 535172, 555229 and the above recommendations are relevant (unless otherwise specified) both for BW and for SAP source systems. -
Data load failed at infocube level
Dear Experts,
I hve data loads from the ECC source system for datasource 2LIS_11_VAITM to 3 different datatargets in BI system. the data load is successful until PSA when comes to load to datatargets the load is successful to 2 datatargets and failed at one data target i.e. infocube. I got the following error message:
Error 18 in the update
Diagnosis
The update delivered the error code 18 .
Procedure
You can find further information on this error in the error message of
the update.
Here I tried to activate update rules once again by excuting the program and tried to reload using reconstruction fecility but I get the same error message.
Kindly, please help me to analyze the issue.
Thanks&Regards,
MannuHi,
Here I tried to trigger repeat delta in the impression that the error will not repeat but then I encountered the issues like
1. the data load status in RSMO is red but where as in the data target the status is showing green
2. when i try to analyze psa from rsmo Tcode PSA is giving me dump with the following.
Following analysis is from Tcode ST22
Runtime Errors GETWA_NOT_ASSIGNED
Short text
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSLVC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
You attempted to access an unassigned field symbol
(data segment 32821).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"GETWA_NOT_ASSIGNED" " "
"SAPLSLVC" or "LSLVCF36"
"FILL_DATA_TABLE"
Here I have activated the include LSLVCF36
reactivated the transfer rules and update rules and retriggered the data load
But still I am getting the same error...
Could any one please help me to resolve this issue....
Thanks a lot,
Mannu
Thanks & Regards,
Mannu -
Data load error during updation of master data
Dear all,
While updating the master data from the PSA , the following error is appearing and the load fails.
"The time interval ['20050313'/'20050313'] & (from/to) for the data
records 1 & and 2 & overlaps in characteristic 0EQUIPMENT &."
What could be the reason for this error and how to correct the same.
I am able to understand that the valid from and the valid to date are same. in R/3 whenever a change record is created for the equipment the valid from and the valid to date will be the same as shown below.
Creation of record (for example today) valid from :- 02.06.2008 and valid to 31.12.9999.
Change of record (for example tommorrow) Valid from :- 03.06.2008 and valid to 31.12.9999
In the above case the valid to date of the creation data will automatically change from 31.12.9999 to 03.06.2008.
How could this be solved.
Regards,
M.MHi Magesh,
Please look at /BIC/*Equipment table in SE16.
Find the record with a key = ********* and notice what values have Date_from and Date_to fields. The interval they determine, overlap with ur date_to and date_from.
You need to supply correct date_to & date_from values.
thanks
Assign points if this helps
Note: this is a common scenario in time dependendent master data.....it happens because you have two records for the same values of master data and also they have overlapping time interval.....you cannot have two values of master data at the same time. -
Hi Experts,
One of my master data full load failed, see the below erro message in status tab,
Incorrect data records - error requests (total status RED)
Diagnosis
Data records were recognized as incorrect.
System response
The valid records were updated in the data target.
The request was marked as incorrect so that the data that was already updated cannot be used in reporting.
The incorrect records were not written in the data targets but were posted retroactively under a new request number in the PSA.
Procedure
Check the data in the error requests, correct the errors and post the error requests. Then set this request manually to green.
can any one please give me solution.
Thanks
DavidHI,
I am loading the data from application server, i dont have R/3 for this load. and the below message is showing in status tab;
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
Thanks
David -
Hi Friends,
While loading master data from Process Chain, the load has been failed by having specail Characteristic in it. W e have edited that characteristic record in SAP R/3 system.
What we have to do now....... Should i have to Repeat the load Process in process Chain For that Object or should i do Manual Upadate from RSMO. There is another 2 process has to run below that master data object.
*************points Are Assured********
Regards
RevathiHi Revathi.....
Is ur load is through PSA?......look U hav edited in the source system.........not in BI side.......if the load is through PSA also.........records r still erroneous in PSA.......
Since u hav already edited in the source system............again editing in PSA is repeating the same job twice.........it is of no use.........
Since it is master data.................no need to delete the request from the target............actually data target means Infocube or ODS.........Master data is not a Data target.........u will not find the data target icon in the infopackage monitor or the data target tab in the infopackage Scheduler.........
Just make the QM status red and repeat the load in the PC............if it is a full load making the QM status red is not mandatory...............but for Delta..........it is mandatory...........since only then Init pointer will set back...........and the System ask u for Repeat delta.......
But another point...........Master data generally does'nt support Repeat delta...........if u try to do Repeat delta.........load will again fail with Update mode R.........then u hav to do re-init...........ie......
1)delete init flag
2)Do init with data transfer
3)then delta.....
Regards,
Debjani...... -
Hi Gurus,
My master data load is failing because of this error.
Record 20 :0CAT_GROUP : Data record 20 ('000200000012 '): Version 'D $$OSS001 ' is not valid
I went back to PSA and found out that I have 6 error records with values $$OSS001 .
0CAT_GROUP is a attribute of master data object
I checked in the master data extractors.These values are coming from ECC .
Can some one tell me how to get rid of these values and reload to Masterdata without errors.i am using BW3.5
Anyhelp would be appreciated.
NeoYou probably have to make appropriate change in settings in RSKC to allow certain characters. Otherwise the best way will be stop these at source, if they are really 'bad' data.
You could also visit the link below:
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
alternatively, you can write routine in transfer rules/ transformation by using
CALL FUNCTION 'RSKC_ALLOWED_CHAR_GET' -
How to access basic cube data as part of update rule routine?
Dear colleagues:
I am developing a routine as part of the update rule to define a characteristic value to feed an infocube. However, I need to peek up a data that is available on another infoprovider, in this case a basic cube.
So far, I have done that by peeking up data form ODS as part of the update routine, but this is the first time I need to peek up a data from a basic cube.
<b>Does that works the same way as ODS?</b>
Best regards
WaldemarHi Krzysztof Konitz:
I have posted an inquire about getting that from the PSA. By mistake I have posted that once before your reply and another after that. Then I red you reply.
However, you replay solved the problem.
Best regards
Waldemar -
How to use Master Data Attribute of in Update Rule's Formula
Hi experts.
In update rule, there is an option to use <b>Master Data Attribute of</b>. However, due to user requirement, I need to use that in <b>Formula</b> instead.
<b>Field to update:</b>
Profit Center
<b>Logic:</b>
If Cost Center is empty
Then Profit Center
Else
Master Data Attribute of Cost Center
I use the following formula at the moment but it is not 100% correct.
<b>IF( Cost Center = '', Profit Center, Cost Center )</b>
Appreciate if anyone could help me out.
Thanks!Hi,
The easier thing to do will be to use a Update Routine.
Logic will be as follows :-
If Cost center iss initial.
Result = Profit Center
else.
result = Cost center.
endif.
Regards
SM -
Data load fails from DB table - No SID found for value 'MT ' of characteris
Hi,
I am loading data into BI from an external system (oracle Database).
This system has different Units like BG, ROL, MT (for Meter). While these units are not maintaned in R3/BW. They are respectively BAG, ROLL, M.
Now User wants a "z table" to be maintained in BW, which has "Mapping between external system Units and BW units".
So that data load does not fail. Source system will have its trivial Units, but at the time of loading, BW Units are loaded.
For example -
Input Unit (BG) -
> Loaded Unit in BW (BAG)
Regards,
Saurabh T.Hello,
The table T006 (BW Side) will have all the UOM, only thing is to make sure that all the Source System UOM are maintained in it. It also have fields for Source Units and target units as you have mentioned BG from Source will become BAG. See the fields MSEHI, ISOCODE in T006 table
If you want to convert to other units then you need to implement Unit Conversion.
Also see
[How to Report Data in Alternate Units of Measure|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b7b2aa90-0201-0010-a480-a755eeb82b6f]
Thanks
Chandran -
Hi All,
In my process data loading from source to target,for example iam loading 100 records ,in that 50th record having error,once the error record occured total loading process want to fail, records needs to rollback and error record need to move error table....any one can you guide on this process...
Thanks in advance....30021986 wrote:
Hi All,
In my process data loading from source to target,for example iam loading 100 records ,in that 50th record having error,once the error record occured total loading process want to fail, records needs to rollback and error record need to move error table....any one can you guide on this process...
Thanks in advance....Hi ,
Test this ..
Set flow control to YES
Set Maximum number of errors allowed to 0 (zero)
Run the interface -
Data Load Fails due to duplicate records from the PSA
Hi,
I have loaded the Master Data Twice in to the PSA. Then, I created the DTP to load the data from the PSA to the InfoProvider. The data load is failing with an error "duplicate key/records found".
Is there any setting that I can configure by which even though I have duplicate records in PSA, I can be successfully able to load only one set of data (without duplicates) in to the InfoProvider?
How can I set up the process chains to do so?
Your answer to the above two questions is appreciated.
Thanks,Hi Sesh,
There are 2 places where the DTP checks for duplicates.
In the first, it checks previous error stacks. If the records you are loading are still contained in the error stack of a previous DTP run, it will throw the error at this stage. In this case you will first have to clean up the previous error stack.
The second stage will clean up duplicates across datapackeages, provided the option is set in your datasource. But you should note that this will not solve the problem if you have duplicates in the same datapackage. In that case you can do the filtering yourself in the start routine of your transformation.
Hope this helps,
Pieter
Maybe you are looking for
-
My sister and I have been using my mom's apple ID for 6 years now. All of our songs and apps are on my mom's account. Now that we are older and have our own ipads (and soon iphones) we would like to make seperate accounts. Is there a way to transfer
-
What I would like to see in a new version of iTunes
A saved point where it gets you to what you were listening to when you closed iTunes last. I like to hear radio show MP3's and it would be nice to get back to were I was last. It would be nice if they save the last five plays where you were. It's not
-
Digital Coaxial Output to AV receiver - Not working
I have hooked up my LCD TV to my HP Desktop (9340f) using the S-video output on an Nvidia 9800GT video card. The video is great, but I cannot get the sound to work from my Harmon Kardon AVR146 receiver. I have connected the digital coaxial output o
-
Is there any way to ignore the Consignment Material (K) while running the ABC Analysis using T-Code MC40 ??? Your response is highly apperciated.
-
Hello everyone, I am new in the topic SAP CRM Web Client and I have to create a new assignment block for the accounts site. In this assignment block you should see the last ten orders of the account. I already have the code to get the data from the t