Data Load failue: Message RSDMD 217

Hi All,
While loading 0employee I am getting the following error message.with Message class RSDMD and Message number 217.
Record '00071570 ' successfully written into /BI0/PEMPLOYEE in second attempt
Currently we are in BI 7, sp 12. Please help me in fixing this issue.
Thanks & Regards,
Hash

Hi Hash
Did you find any solution for the warning you r getting.
I am getting the same warning in case of organization unit.
any help is appreciated.
you can send mail to my id [email protected]
Thanks

Similar Messages

No Data Load Error messages

There are times - frequent in numbers - when I get a message after I try to click on a hyper link in a web page. The message pops up say that Safari could not load data from link or there was no data to load.
I have become so used to this that I click OK and immediately go back to link, click it again, and the page loads. I have noticed that this will happen when I quickly hit the link, or swipe at it at an angle.
side comment:
as much as I want to like Safari, I find it has serious stability problems. I can almost sense when it's going to crash. When I come across java intense web pages or other like intensively programmed sites, I always cringe, waiting for the moment when I am going to have to SUBMIT REPORT after crashing.
What mystifies me - and I could be wrong here - is, what seems to be, the lack of updates for this program.
I would love to know the TRUTH behind Apple's priorities concerning this program.

It sounds like you have some type of conflict in your system affecting the behavior of Safari. Yes, as with other browsers, Safari has exhibited certain stability issues, however, no where near the scale you describe.
I see you have a new Intel machine. Is this the machine exhibiting the problems? Or are you seeing Safari problems on all your machines listed in your post tag? If only on the Intel, did you transfer information over from another Apple machine? If so, perhaps some of the Safari/Internet files, such as plug-ins, library manager items etc. from the older system are not Intel compatible causing the stability problems you are seeing.
The link problem you are having may relate to the Cache file. Have you emptied the cache (Safari Menu)? It may also relate to possible corruption in your Safari preference file. Moving the .com.apple.safari.plist file found in your User Library>Preferences folder to the Desktop and restarting Safari is one way to find out if you have a file corruption problem.
Do you see the same problems occurring when using Safari from another user account - you can create another user account in your System Preferences>Accounts? If Safari is stable, then the problem points to your main user account.
Please post back.
iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD Mac OS X (10.4.7) LaCie 160gb d2 HD Canon i960 printer

Data Load with warnings, but dataload.err empty

Hi guys,
laoding data on EAS Console for a Essbase database gives below message:
Database has been cleared before loading.
dataload.err is EMPTY.
Any ideas??
Some data is loaded but how can I find out where it stopped or is all my data loaded?
Message:
Parallel dataload enabled: [1] block prepare threads, [1] block write threads.
Transaction [ 0x190004( 0x4fd89600.0x64578 ) ] aborted due to status [1003050].
There were errors, look in H:\My Documents\temp\dataload.err
Database import completed ['AXN_Sim'.'BewMod']
Output columns prepared: [0]
Thanks Bernd

Hi,
There is nothing much you can say whether the data is completely loaded or not. You have to check by yourself on that.
Since the loading was aborted with a warning, it could be a network issue..
Try to load a small file and then check whether you are facing the problem or you coulfd also post your finding on that..
Thanks,
CM

Message Number RSDMD 217

While loading 0MAT_PLANT I am getting the following error message.with Message class RSDMD and Message number 217.
Record 'xxxxxx ' successfully written into /BI0/XMAT_PLANT in second attempt
Has anyone faced the same and if so how was this resolved?
We are on BI 7 SP 13
Thanks

Hi,
Note 1047847 should solve the error.
And also do consistency check in RSRV or program RSDMD_CHECKPRG_ALL .
Regards,
Srikanth
Message was edited by:
Srikanth Kanuri

Master data loading error: RSDMD 194

Hi Experts,
I working on BI7.0,
I have loaded 0Material data upto PSA from R/3 successfuly. When I try
to execute DTP from PSA to 0Material Master data it is giving following error,
but some records loaded successfully from PSA to Target.
0MATERIAL : Data record 1 ('310957 '): Version '310957 ' is not valid     RSDMD     194
Diagnosis
     Data record 1 & with the key '310957 &' is invalid in value '310957 &'
     of the attribute/characteristic 0MATERIAL &.
System Response
     The system has recognized that the value mentioned above is invalid, and
     has processed this general error message. A subsequent message may give
     you more information on the error. This message refers to the same
     value, even though it does not state this explicitly.
Procedure
     If this message appears during a data load, maintain the attribute in
     the PSA maintenance screens. If this message appears in the master data
     maintenance screens, leave the transaction and call it again. This
    allows you to maintain your master data.
Procedure for System Administration
Kindly advise.
Thanks in advance.
Maruthi.

Hi -
I faced the same issue.
Error : 'RSDMD 184'
It was delta load. Initial load went well, but delta failed. I ran the delta after some days after initial load.
The problem was with the source system data. Just check the source data once with R/3 people. Delete data from BW and replicate the data source and activate transfer structure and try loading again.
Tks,
Praveen Tati

Error Message after data load (error is "1130610")

We load data using a data load rule. The data seems to load fine except we get the error message "ERROR - 1241101 - Unexpected Essbase error 1130610" on last line below? Any thoughts? Is there a guide somewhere that explains in details all the various error codes and what they refer to? We're using Essbase 6.5.1. Thanks!======================================= OK/INFO - 1003037 - Data Load Updated [364875] cells. OK/INFO - 1003024 - Data Load Elapsed Time : [428.323] seconds. ERROR - 1241101 - Unexpected Essbase error 1130610.=======================================

The explanation of error 1130610 is the following:Possible Problems - Essbase cannot open a file. Possible Solutions - If you are using an error file, make sure that the error file is being created in a directory that already exists. Make sure you are using the ESSCMD IMPORT command correctly. Put all files the ESSCMD script needs in the $ARBORPATH\APP\applicationName\databaseName directory. Run the ESSCMD script from the $ARBORPATH\APP\applicationName\databaseName directory. Check the ESSCMD script for invalid paths. Make sure every folder that the script is pointing to exists. If you are using an error file, make sure that the error file is being created in a directory that already exists.

Error loading the data into ODS - Message no. BRAIN060?

Hi,
I am getting following error while load the data from flat file, data loaded successfully from flat file to PSA but I got following error while updating the data from PSA to data target:
Value '010384 javablue' (hex. '30003100300033003800340020006A0061007600610062006C') of characteristic 0PO_NUMBER contains invalid characters
Message no. BRAIN060
Diagnosis
The following standard characters are valid in characteristic values as default:
!"%&''()*+,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ
Characteristic values are not allowed if they only consist of the character "#" or begin with "!". If the characteristic is compounded, this also applies to each partial key.
You are trying to load the invalid characteristic value 1. (hexidecimal representation 30003100300033003800340020006A0061007600610062006C).
I am trying to load Value '010384 javablue' to "0PO_NUMBER" info object for ODS with in one row with some other data.
Any idea or any input to resolve this issue?
Thanks in advance for any input.
Steve

Thanks Soumya, I have maintained the upper case letters, but I am loading upper and lower case mixed to PO number? and it is not working. What is the solution to this? If I set lower case property to the PO number infoobject, it won't accept upper case. If I uncheck the lower case then it won't accept lower case letters. I cannot add upper and lower case letters in RSKC, because it accepts up to 72 characters, I have already have more than 60 characters (special char, numbers and 26 upper case letters).
I have already tried transfer routine but you can either convert to lower or upper but it doesn't work. we need both uper and lower case for po number, and R/3 is accepting it. why BW doesn't accept both?
Any idea what can be done?
Thanks in advance for your help.
Steve

Message while data load is in progress

Hi,
We are loading the data in the infocube every day twice i.e in the morning and the afternoon.
Loading methodology is always delete and load. At any given point we have only one request in the cube. Data Load takes arround 20-30 minutes.
When the user runs the query during the data load, he gets the message 'No Applicable Data Found'. Can anyone please advise, how do we show the proper message like 'Data is updating in the system..Please try after some time...' etc.
We are using BEx Browser with a template and a query attached to the template.
Please advise.
Regards
Ramesh Ganji

Hi,
Tell the time of the data load to the users so that they are aware that the loads are in progress and data will not be available for reportting as of now and prohibit themselves from running the report give a buffer time of around 15-20 mins as there might be some issue some where down the line. Ask them to run the report other than the time data loads are happening
You could also reschedule the timings of the process chain to finish before the users comes in.
As far as the functionaly you are referring to i am not sure if we are able to acheive this..
Regards
Puneet

Error message after successful manual data load

On our Stautory App, we have renamed our Accounts Dim to StatAccounts.
On data send I get an error message after data is submitted
successfully:
Application     :       STATUTORYCONSOL
       Status :       Success
       Submitted Count :       1
       Accepted Count :       1
       Rejected Count :       0
               - Error Message -
ExecuteBaseLogic::Invalid dimension: ACCOUNT
We have renamed both Constants.lgl and System_Constants.lgl to
StatAccounts and yet the error message persists!
Regards
JP

Hi,
The resolution was as follows:
The app set I used as the "template" had a custom stored procedure in it which was being activated on data load. This stored procedure was caliing the ACCOUNT dimension instead of the STATACCOUNTS dimension.
We have deleted all unused packages and the issue is resolved...
Thanks to everyone for responses.
JP

Alert Message When Data Load Fails

Hi Friends,
I have three process chains(p1,p2,p3)and all for transactional data loading(psa-ods-cube).suppose whenever data load fails,it sends message to my company mail id. is there any functionality to do like this.
i am not much aware of RSPCM(Process Chain Monitor).if anyone knows. tell me how much does it support my requirement?
thank in advance
sam

hi Sam,
welcome to sdn ...
you can add 'create message' by right click the process type, this will lead you to mail sending setting.
see thread
Getting Failed process chain info through email
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0afcd90-0201-0010-b297-9184845346ca
you may need to setup sapconnect for email, take a look
http://help.sap.com/saphelp_webas620/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_webas620/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
hope this helps.

Problem with Master Data Load

Dear Experts,
If somebody can help me by the following case, please give me some solution. Iu2019m working in a project BI 7.0 were needed to delete master data for an InfoObject material. The way that I took for this was through tcode u201CS14u201D. After that, I have tried to load again the master data, but the process was broken and the load done to half data.
This it is the error:
Second attempt to write record 'YY99993' to /BIC/PYYYY00006 failed
Message no. RSDMD218
Diagnosis
During the master data update, the master data tables are read to determine which records of the data package that was passed have to be inserted, updated, or modified. Some records are inserted in the master data table by a concurrently running request between reading the tables at the start of package processing and the actual record insertion at the end of package processing.
The master data update tries to overwrite the records inserted by the concurrently running process, but the database record modification returns an unexpected error.
Procedure
u2022     Check if the values of the master data record with the key specified in this message are updated correctly.
u2022     Run the RSRV master data test "Time Overlaps of Load Requests" and enter the current request to analyze which requests are running concurrently and may have affected the master data update process.
u2022     Re-schedule the master data load process to avoid such situations in future.
u2022     Read SAP note 668466 to get more information about master data update scheduling.
Other hand, the SID table in the master data product is empty.
Thanks for you well!
Luis

Dear Daya,
Thank for your help, but I was applied your suggesting. I sent to OSS with the following details:
We are on BI 7.0 (system ID DXX)
While loading Master Data for infoobject XXXX00001 (main characteristic in our system u2013 like material) we are facing the following error:
Yellow warning u201CSecond attempt to write record u20182.347.263u2019 to BIC/ XXXX00001 was successfulu201D
We are loading the Master data from data source ZD_BW_XXXXXXX (from APO system) through the DTP ZD_BW_XXXXX / XXX130 -> XXXX00001
The Master Data tables (S, P, X) are not updated properly.
The following reparing actions have been taken so far:
1.     Delete all related transactional and master data, by checking all relation (tcode SLG1 à RSDMD, MD_DEL)
2.     Follow instructions from OSS 632931 (tcode RSRV)
3.     Run report RSDMD_CHECKPRG_ALL from tcode SE38 (using both check and repair options).
After deleting all data, the previous tests were ok, but once we load new master data, the same problem appears again, and the report RSDMD_CHECKPRG_ALL gives the following error.
u201CCharacteristic XXXX00001: error fund during this test.u201D
The RSRV check for u201CCompare sizes of P and X and/or Q and Y tables for characteristic XXXX00001u201D is shown below:
Characteristic XXXX00001: Table /BIC/ PXXXX00001, /BIC/ XXXXX00001 are not consistent 351.196 derivation.
It seems that our problem is described in OSS 1143433 (SP13), even if we already are in SP16.
Could somebody please help us, and let us know how to solve the problem?
Thank for all,
Luis

0MATERIAL master data loading error - version not valid

Hi all,
When i am trying to load 0material master data , i get the following error :
0MATERIAL:Data record 1 ('000000000000100001 '): Version '000000000000100001 ' is not valid RSDMD 194
System diagnosis :
Data record 1 & with key '000000000000100001 &' is invalid in value '000000000000100001 &' of the attribute or characteristic 0material &.
System response
The system has recognized that the value mentioned above is invalid, and has processed this general error message. A subsequent message may give you more information on the error. This message refers to the same value, even though it does not state this explicitly.
Procedure
If this message appears during a data load, maintain the attribute in the PSA maintenance screens. If this message appears in the master data maintenance screens, leave the transaction and call it again. This allows you to maintain your master data.
Please help me solve this problem. Will assign points.
Thanks & Regards,

Hi Stefen,
Thanks a lot for your input.. It has solved my problem as well.
10 points from me
Thanks a lot.
Regards
Dolly

Data load problem - BW and Source System on the same AS

Hi experts,
Im starting with BW (7.0) in a sandbox environment where BW and the source system are installed on the same server (same AS). The source system is the SRM (Supplier Relationship Management) 5.0.
BW is working on client 001 while SRM is on client 100 and I want to load data from the SRM into BW.
Ive configured the RFC connections and the BWREMOTE users with their corresponding profiles in both clients, added a SAP source system (named SRMCLNT100), installed SRM Business Content, replicated the data sources from this source system and everything worked fine.
Now I want to load data from SRM (client 100) into BW (client 001) using standard data sources and extractors. To do this, Ive created an InfoPackage in one standard metadata data source (with data, checked through RSA3 on client 100 source system). Ive started the data load process, but the monitor says that no Idocs arrived from the source system and keeps the status yellow forever.
Additional information:
BW Monitor Status:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System Response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
BW Monitor Details:
0 from 0 records
but there are 2 records on RSA3 for this data source
Overall status: Missing messages or warnings
- Requests (messages): Everything OK
o Data request arranged
o Confirmed with: OK
- Extraction (messages): Missing messages
o Missing message: Request received
o Missing message: Number of sent records
o Missing message: Selection completed
- Transfer (IDocs and TRFC): Missing messages or warnings
o Request IDoc: sent, not arrived ; Data passed to port OK
- Processing (data packet): No data
Transactional RFC (sm58):
Function Module: IDOC_INBOUND_ASYNCHRONOUS
Target System: SRMCLNT100
Date Time: 08.03.2006 14:55:56
Status text: No service for system SAPSRM, client 001 in Integration Directory
Transaction ID: C8C415C718DC440F1AAC064E
Host: srm
Program: SAPMSSY1
Client: 001
Rpts: 0000
System Log (sm21):
14:55:56 DIA 000 100 BWREMOTE D0 1 Transaction Canceled IDOC_ADAPTER 601 ( SAPSRM 001 )
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a termination message from the application (MESSAGE Axxx) or by an error detected by the SAP System due to which it makes no sense to proceed with the transaction. The actual reason for the termination is indicated by the T100 message and the parameters.
Additional documentation for message IDOC_ADAPTER 601 No service for system &1, client &2 in Integration Directory No documentation exists for message ID601
RFC Destinations (sm59):
Both RFC destinations look fine, with connection and authorization tests successful.
RFC Users (su01):
BW: BWREMOTE with profile S_BI-WHM_RFC (plus SAP_ALL and SAP_NEW temporarily)
Source System: BWREMOTE with profile S_BI-WX_RFCA (plus SAP_ALL and SAP_NEW temporarily)
Someone could help ?
Thanks,
Guilherme

Guilherme
I didn't see any reason why it's not bringing. Are you doing full extraction or Delta. If delta extraction please check the extractor is delta enabled or not. Some times this may cause problems.
Also check this weblog on data Load errors basic checks. it may help
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Thanks
Sat

Data load times

Hi,
I have a question regarding data loads. We have a process cahin which includes 3 ods and cube.
Basically ODS A gets loaded from R/3 and the from ODS A it then loads into 2 other ODS B, ODS C and CUBE A.
So when I went to monitor screen of this load ODS A-> ODS B,ODS C,CUBE A. The total time shows as 24 minutes.
We have some other steps in process chain where ODS B-> ODS C, ODS C- CUBE 1.
When I go the monitor screen of these data loads the total time the tortal time for data loads show as 40 minutes.
I *am suprised because the total run time for the chain itself is 40 minutes where in the chain it incclude data extraction form R/3 and ODS's Activations...indexex....
*Can anybody throw me some light?
Thank you all
Edited by: amrutha pal on Sep 30, 2008 4:23 PM

Hi All,
I am not asking like which steps needed to be included in which chain.
My question is when look at the process chain run time it says the total time is equal to 40 minutes and when you go RSMO to check the time taken for data load from ODS----> 3 other data targets it is showing 40 minutes.
The process chain also includes ods activation buliding indexex,extracting data from R/3.
So what are times we see when you click on a step in process chain and displaying messages and what is time you see in RSMO.
Let's take a example:
In Process chain A- there is step LOAD DATA- from ODS A----> ODS B,ODS C,Cube A.
When I right click on the display messages for successful load it shows all the messages like
Job started.....
Job ended.....
The total time here it shows 15 minutes.
when I go to RSMO for same step it shows 30 mintues....
I am confused....
Please help me???

Master Data loading got failed: error "Update mode R is not supported by th

Hello Experts,
I use to load master data for 0Customer_Attr though daily process chain, it was running successfully.
For last 2 days master data loading for 0Customer_Attr got failed and it gives following error message:
"Update mode R is not supported by the extraction API"
Can anyone tell me what is that error for? how to resolve this issue?
Regards,
Nirav

Hi
Update mode R error will come in the below case
You are running a delta (for master data) which afils due to some error. to resolve that error, you make the load red and try to repeat the load.
This time the load will fail with update mode R.
As repeat delta is not supported.
So, now, the only thing you can do is to reinit the delta(as told in above posts) and then you can proceed. The earlier problem has nothing to do with update mode R.
example your fiorst delta failed with replication issue.
only replicating and repeaing will not solve the update mode R.
you will have to do both replication of the data source and re-int for the update mode R.
One more thing I would like to add is.
If the the delat which failed with error the first time(not update mode R), then
you have to do init with data transfer
if it failed without picking any records,
then do init without data transfer.
Hope this helps
Regards
Shilpa
Edited by: Shilpa Vinayak on Oct 14, 2008 12:48 PM

Data Load failue: Message RSDMD 217

Similar Messages

Maybe you are looking for