Data load failure with '#'
Hi Experts,
One of our data load is failing with special characteristic '#'.
The exact error records is as follows: 390-166333#New, SUB, Fan 80x80x80mm, 12
We have maintained '#' in RSKC, but still the load is failing.Any reason ?
After editing '#' in PSA and reload fixed the issue.
Can anyone suggest what should be done to fix this.
Thanks & Regards,
Naveen.
Hi,
try below field level routine.
DATA: l_d_length like sy-index.
DATA: l_d_offset LIKE sy-index.
DATA: CharAllowedUpper(60) TYPE C.
DATA: CharAllowedLower(60) TYPE C.
DATA: CharAllowedNumbr(60) TYPE C.
DATA: CharAllowedSondr(60) TYPE C.
DATA: CharAllowedAll(240) TYPE C.
CharAllowedUpper = 'ABCDEFGHIJKLMNOPQRSTUVWXYZÄÜÖ'.
CharAllowedLower = 'abcdefghijklmnopqrstuvwxyzäüöß'.
CharAllowedNumbr = '0123456789'.
CharAllowedSondr = '!"§$%&/()=?{[]}\u00B4`*+~;:_,.-><|@'''.
CONCATENATE CharAllowedUpper CharAllowedLower CharAllowedNumbr
CharAllowedSondr INTO CharAllowedAll.
RESULT = SOURCE_FIELDS-ENTITYNAME.
l_d_length = strlen( RESULT )
IF NOT RESULT CO CharAllowedAll.
DO l_d_length TIMES.
l_d_offset = sy-index - 1.
IF NOT RESULT+l_d_offset(1) CO CharAllowedAll.
RESULT+l_d_offset(1) = ''.
CONDENSE RESULT NO-GAPS.
ENDIF.
ENDDO.
endif.
CONDENSE RESULT NO-GAPS.
TRANSLATE RESULT TO UPPER CASE.
Thanks,
Phani.
Similar Messages
-
Data load failure with datasource Infoset Query
Dear Experts,
I had a data load failure today,where i am getting data from the datasource which was built on Infoset Query.
we had a source system upgrade and when i checked Infoset query in the development of Source sytem im getting the below message :
"Differences in field EKES-XBLNR
Output Length in Dictionary : 035
Output Length in Infoset : 020
Message was saying Adjust the INFOSET,I dont have authorisation to create the transport in the source system.I requested the respective person to Adjust the Infoset and also to regenerate the same and move to production system.
I think this will solve my problem,Please correct me if am wrong.
Regards,
Sunil Kumar.BHi Suman,
i am still facing the problem even after adjusting the Infoset.The problem is we are facing the short dump with length mismatch.
when i checked the Infoset we are taking the field xblnr from table EKES and data element for teh field was XBLNR_LONG(char-35) but when i checked the datasource in RSA2 the dataelement for XBLNR was showing as BBXBL(char20).
i think this was causing the problem and i checked in SQ02 we will take the field directly from the table and how there is chance to change the dataelement.
Please help me to correct the same.
Regards,
Sunil Kumar.B -
Data load failing with a short-dump
Hello All,
There is a data load failing with the following short-dump:
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_FOEV_ERROR_IN_FUNCTION
Full text:
"UNCAUGHT_EXCEPTION" CX_FOEV_ERROR_IN_FUNCTIONC
"CL_RSAR_FUNCTION==============CP" or "CL_RSAR_FUNCTION==============CM004"
"DATE_WEEK"
It seems as if it is failing in a function module - please advise.
Regards,
Keith KibuukaDid you read OSS [Note 872193 - Error in the formula compiler|https://service.sap.com/sap/support/notes/872193] or OSS [Note 855424 - Runtime error UNCAUGHT_EXCEPTION during upload|https://service.sap.com/sap/support/notes/855424]
Regards -
Everynight we are loading the data into BW Production system using Process Chains.
When there is data load failure, is there a way we get information on Pager for immediate action.
Suggestions are welcome.Easiest way (at least the way I've always set it up)is if you have a text pager is have it e-mail the pager. The BASIS team will need to set up the SMTP service in ICM and a job to schedule the e-mails to be sent. You'll also need to set up the e-mail address in the user's SU01 info. There are several notes on how to set this up.
You can also set up a program that pages you but requires an exteral modem to dial up, etc. SMTP service is already there and pretty easy to integrate into your company's e-mail.
-bill
Message was edited by: Bill Smallwood -
SQL data Load rule with Substitution variable
Hi,
I have a data load rule with MySQL as a data source. I have requirement where user does not want to see Current day data in cube and they keep changing days not to be loaded.
I have setup the substitution variable SUBv as '2009-11-04' and have scripts to update it daily.
Data Load rule in where condition contains
brand = 'HP' and region = 'east' and date <> &SUBv
Now, above where condition does not work for date <> &SUBv but if I set substitution variable SUBv as "brand = 'HP' and region = 'east' and date <> '2009-11-04' " and set load rule where condition with just &SUBv it would just work fine. I dont know whats wrong in 1st place.
I dont want to create multiple where condition in substitution variable (Don't we have limit on them?). I have 40+ load rules which might use this SUBv substitution variable if I find a way to define it so that it work as "brand = 'HP' and region = 'east' and date <> &SUBv"
Thanks,
VikramI did some research and came to know when using substitution variable in Load rule need to keep substitution variable first in string..
It worked out magically. -
Master Data Load Failure- duplicate records
Hi Gurus,
I am a new member in SDN.
Now, work in BW 3.5 . I got a data load failure today. The error message saying that there is 5 duplicate records . The processing is in to PSA and then to infoobject. I checked the PSA and data available in PSA. How can I avoid these duplicate records.
Please help me, I want to fix this issue immediately.
regards
MiluHi Milu,
If it is a direct update, you willn't have any request for that.
The Data directly goes to Masterdata tables so don't have Manage Tab for that infoobject to see the request.
Where as in the case of flexible update you will have update rules from your infosource to the infoobject so you can delete the request in this case.
Check this link for flexible update of master data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/37dda990-0201-0010-198f-9fdfefc02412 -
Hi All,
Could any body clearly explain the following options in the Info Package of master data Info Object with full update
Update data
1. PSA and then into Info Obejcts
2 . Only PSA ( Update Subsequently in data targets )
Data source trasfers no duplicate records
Igonore double data records
While I am doing master data load with the 1 and 3 options I am getting same no of records updated in PSA but loadng is getting failured with the 1st option (Caller 01 02 .. 20 Messages ) .and request with 3rd option is success..
Thanks in Advance...
Regards,
NagamaniHi
U r master data might have the Dublicate records
select the PSA
and select the option
Ignore dublicate data records
IF you have the Deblicates
EX
CNO
1010
1020
1010
ITs not alowed the 1010 record
Regards -
Data load failures in Essbase Clusters ( MSCS)
Hi,
If there is a failure on the Active Essbase Cluster Node (call this Node A) and the Cube has to be rebuilt on Cluster Node B, how will the Cube be re-built on Cluster Node B.
what will orchestrate the required activities in the correct order to rebuild the Cube)? Both Essbase nodes are mounted on to Microsoft Clustered Services.
In essential, I want to know
A) How to handle the metadata load that failed on Node1 onto Essbase Node2?
B) Does the session continues to perform the meta data/ data load on the Essbase Second Node when the Essbase First Node fails?
Thanks for your help in advance.
Regards,
UB.It would be built the same way as you either use the Essbase clustername or the MSCS VIP used for the Essbase cluster configuration, you would not ever be referencing a host name so it does not matter which node it is running on.
The session will be lost on a failover as it is the same as an essbase restart.
Cheers
John
http://john-goodwin.blogspot.com/ -
Error in the hierarchy structure - Data Load Failure
Hi
We are having a regular Master data hierarchy Full load: 0WBS_ELMT. This data load is from the SAP R/3 source system. It was failed today with following message:
Error in the hierarchy structure
Node ID 00016749 does not exist.
Node ID 00005867 starts an endless loop
Node ID 00001367 has not been included in the hierarchy
Can any one help me out to solve this issue?
Best Regards,
Venkata.hi,
refer to this thread.
No hierarchy displaying in the Maintain Hierarchies -
Hi,
I created a BW Data Source in R/3 and checked in RSA3 (R/3) it is extracting the required record...
But when i started data load in BW using that extractor i am geting error message
<b>Request IDoc : Application document not posted</b>
How can i proceed.
ThanksHi,
Refer the link:
https://forums.sdn.sap.com/click.jspa?searchID=937834&messageID=2379005
With rgds,
Anil Kumar Sharma .P -
Data Load: Replace with Rule
Hi guys,
this might be a simple question but need to find out quickly:
Can it load exports with a rule file even its not in column format??
Data source is an export and NOT in column format and need to load the data with a rule file to replace a member name. The new member names in the new outline has changed a little bit.
Old: Team_1
New: Team_01
Export is done by right click data base -> export.
Any idea?
Regards,
Bernd
Edited by: Bernd on Mar 15, 2012 4:13 PMData file in a free-form format doesn't need a rule file to import. Given your case my best guess is to just replace the names in the export file with the new names and jsut import it.
-
Initialisation data load failure
Hi all,
My initialisation data load for 0EC_PCA_3 failed with an error message "Selected No does not agree with transferred no." , the data processing is ok.
I am pasting the shrot dump from the source system below.
Error analysis
An error occurred when executing a REMOTE FUNCTION CALL.
It was logged under the name " "
on the called page.
Last error logged in SAP kernel
Component............ "SAP-Gateway"
Place................ "SAP-Gateway on host hccr3prda1 / sapgw00"
Version.............. 2
Error code........... 242
Error text........... "timeout during allocate"
Description.......... "no connect of TP opti1 from host hccr3prda1 after 22
sec"
System call.......... " "
Module............... "gwr3cpic.c"
Line................. 5709
ThanksHi Roberto I have requested the data again twice , but this time the error message is different please could you help me with this.
When attempting to access the data of table "ARFCSSTATE ", an internal error at
the database interface occurred.
but when I check the D/B , it is accessible.
may be I have to debug the flow , can u brief me how to debug the flow from R/3.
Thanks -
Data loading problem with Movement types
Hi Friends,
I extarcted data using the data source General Ledger : Line itemdata (0fi_gl_4) to BW side.
Problem is Movement Types for some documents missing.
But i checked in rsa3 that time showing correctly.
i restricted the data in bw side infopackage level only particular document that time data loading perfecly.
this data source having 53,460 records.among all the records 400 records doc type 'we' movement types are missing.
please give me solution for this how to loading the data with movement types.
i checked particular document of 50000313 in RSA3 it is showing movement types. then i loaded data in bw side that time that movement types are not comming to be side. then i gave the particular doc 50000313 in infopackage level loading the data that time movement types are loading correctly. this extaractor having 55000 records.
this is very urgent problem.Please give me reply urgenty. i am waiting for your's replys.
Thanks & Regards,
Guna.
Edited by: gunasekhar raya on May 8, 2008 9:40 AMHi,
we enhanced Mvement type field(MSEG-BWART) General ledger (0FI_GL_4) extractor.
this field populated with data all the ACC. Doc . number.
Only 50000295 to 50000615 in this range we are not getting the movement types values.
we didn't write any routines in transfer and update rules level.
just we mapped to BWART field 0MOVETYPE info object.
we restrict the particular doc no 50000313 infopackage level that time loading the the data into cube with movement types.
but we remove the restriction infopackage level then loading the data that time we missing the movement types data of particular doc no 50000295 to 50000615.
Please give mesolution for this. i need to solve this very urgently.
i am witing for your reply.
Thanks,
Guna. -
Infocube data loads fail with UNCAUGHT_EXCEPTION dump after BI 7.01 upgrade
Hi folks,
We're in the middle of upgrading our BW landscape from 3.5 to to 7.01. The Support pack we have in the system is SAPKW70103.
Since the upgrade any of the data loads going to infocubes are failing with the following
ABAP dump UNCAUGHT_EXCEPTION
CX_RSR_COB_PRO_NOT_FOUND.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSR_COB_PRO_NOT_FOUND', was not
caught and
therefore caused a runtime error.
The reason for the exception is:
0REQUEST is not a valid characteristic for InfoProvider
Has anyone come accross this issue and if so any resolutions you adopted to fix this. Appreciate any help in this regard.
Thanks
Mujeebhi experts,
i have exactly the same problem.
But I can`t find a test for infoobjects in rsrv. How can I repair the infoobject 0REQUEST`?
Thx for all answers!
kind regards
Edited by: Marian Bielefeld on Jul 7, 2009 8:04 AM
Edited by: Marian Bielefeld on Jul 7, 2009 8:04 AM -
Master data load failure. RSRV check resulted in inconsistencies.
Hi...
In our production system, master data load to 0EMPLOYEE is failing every alternate day. When I check the same in RSRV, following checks are red:
1. Time intervals in Q table for a characteristic with time-dep. master data
2. Compare sizes of P or Q and X or Y tables for characteristic 0EMPLOYEE
3. SID values in X and Y table: Characteristic '0EMPLOYEE'
If I repair it, it becomes green and the load is fine. Next day the load fails again. When I check in RSRV, I get the same 3 errors. So, again I need to repair it. Let me know the permanent solution for this.
I ran the programs: RSDG_IOBJ_REORG and RSDMD_CHECKPRG_ALL but these fixes are also temporary. Moving a new version of the object from Dev to QA and then to Production is not preferable right now as this involves a high amount of visibility.
I know the SID tables and all are corrupted from the logs I see. But is there any permanent solution for this without transports?
Thanks,
SrinivasHi
Chk this link will help you: Master data deletion
Regards
Ashwin.
Maybe you are looking for
-
Read-only access permissions for new files/folders?
System: Clean Install on new intel Xserve 10.4.8 Server w/ Open Directory Windows clients can read/write completely fine... Clients connecting using AFP (whether Standard or Kerberos authentication) can access files, but when new files/folders are cr
-
HT2907 My laptop doesn't recognize my ipod nano 4th generation. What can I do?
I connect my IPod to the laptop and it doesn't recognize it. My laptop doesn't recognize my iPod and Itunes neither.
-
TS1631 One speaker is not functional in my iphone4
One of the speaker of my iphone4 is not working
-
Webdynpro iview Customization not reflecting to all users
Hi Forum, In Webdynpro ivew, from Content Administration >> preview >> done some customization by CTRL+Right Click. But when we access that page assigned to a role, customization is reflecting to only that user but not for other users. But we want th
-
My macbook pro won't load all the way when I start it up.
Lately, my mac book pro has been slow to use, and the colour wheel pops up often. I shut it down earlier today, and now when I try to start it up, it won't load all the way. When I do manage to get to the homescreen, the applications and toolbars won