Data load from BPC into BI 7 cubes for Bex reporting

Hi,
Can we pull BPC planning data into the BI cubes so that Bex reports can be created for combined data from BPC cubes and BI cubes?
Also can we create Bex reports on BPC cubes just like we create for BI reporting cubes?
Let me also give an example of the scenario we face.
We have actuals data in a BI 7 basic cube(Actuals cube). Planning is done in BPC, so I understand  that the planned data gets automatically stored in a BPC cube in BI7 system. I want to load the data from this BPC cube to BI Actuals cube and create a combined Bex report to show actuals and plan data.
Please let me know.
Thanks,
Archana

AS of now, if you report data in the BPC7NW cubes through BEx, you may not get the same result as you get from BPC reports. The reason being BEx won't do the same calculations (for example sign reversals) that BPC client would do. In addition, you won't be able to report the results of the dimension member formulas when you report through BEx. If you have to get data out from BPC cubes to other cubes, you can go through SQE (shared query engine) and that way, yyour results will match with what you get in BPC reports. Once you get data out through SQE into other cubes, you can use BEx to report if you wish.
More functionality will be available in near future to accomplish BEx reporting for BPC data.
Regards
Pravin

Similar Messages

  • Automated data load from APO to SEM transactional cube

    Hi ,
    We have BW-SEM system integrated with APO system.
    I could see automated data loads from APO to SEM transactional cube ..
    Infopackage name as "Request loaded using the APO interface without monitor log" ..
    I don't see any infopackage by this name in both the systems ( APO & SEM )..
    I am not sure how it configured ..
    Appreciate any inputs on how its happens .....
    Thanks in advance

    Hi,
    As I mentioned the starting point will be the tcode BPS0. There will be 2 planning areas created (if I am correct) one for SEM cube and the other for APO cube. The better way to find it will be goto tcode se16 and enter UPC_BW_AREA and key in the cube names in the cube field. this will give you the planning area names now look for a multiplanning area which has the 2 areas included in them (this is available in table UPC_AREAM).
    then goto BPS0 and you will have to find which function is being used to post the data.
    thanks

  • Automate data load from BPC cube to BW cube

    Hi Gurus,
    I've got all my budgeting & forecasting data in BPC cube. Now I need to load it to a BW cube and combine with Actuals in another BW cube through Multiprovider and build reports on the multiprovider.
    My question is:
    What is the best way to automate the loading process of BPC cube data to BW cube ??
    I should also be able to load the property values of BPC dimensions to the BW info objects.
    The methods I followed are:
    1. Run "Export" data package and load BPC data to a CSV file and run BW DTP/infopackage to process the CSV file into BW cube. Problem with this is - I canot automate these two steps, and even if I did, I cannot export property values to a flat file.
    2. Build transformations directly from BPC cube to an Infosource and from Infosource to BW cube. Problem with this is - in the transformations I cannot use the rule: "Read Master Data". I may have to write a routine, but my ABAP is not good enuf.
    Please help with an alternative solution
    Thanks,
    Venkat

    Thanks for the reply. I know I will have more options if I'm BPC 7.5 NW. But I'm on BPC 7.0 NW.
    I managed to pull the attribute values of BPC dimensions using routines. But still it's risky because the tech names of BPC objects may change if one modifies the dimensions or run optimization.
    It's a shame SAP haven't provided a robust solution to load BPC cube data to BW cube data.
    I don't want to load BW cube data to BPC cube and depend on EVDRE reports for my 'Plan vs Actual' reports. I (and end users) always want to lean towards BEx reports.

  • Data Load from a DSO to a Cube

    Hello,
    I am facing a problem
    Case:
    There is a DSO with following Char/Key Figure:
    Characteristics     ( Value-1 )     ( Value-2 )     ( Value-3 )
    A(Key)          ( A1 )     ( A2 )     ( A3 )
    B(Key)          ( B1 )     ( B2 )     ( B3 )
    C          ( C1 )     ( C1 )     ( C1 )
    D          ( D1 )     ( D1 )     ( D1 )
    E          ( E1 )     ( E1 )     ( E1 )
    F          ( F1 )     ( F1 )     ( F1 )
    KF1(Key Figure)     ( 10 )     ( 20 )     ( 30 )
    I got below data from the DSO to a Cube(structure is below with data) details are below:
    Dimention          ( Values )     
    C          ( C1 )          
    D          ( D1 )          
    E          ( E1 )          
    F          ( F1 )          
    KF1(Key Figure)     ( 50 )
    My Question is why i am not getting KF1 value as 60.
    When i tried with including Key Fields of the DSO, i got all the records in the Cubes.
    Where i am mistaking?
    Can some one correct me please?
    Thanks.
    Avinash.

    Below are the basic steps which we follow in any BI 2004S system:
    1)Create datasource. Here u can set/check the Soucre System fields.
    2)Create Transformation for that datasource. (no more update rules/transfer rules)
    2.1) While creating transformation for DS it will ask you for data target name, so just assign where u want to update ur data.
    DataSource -> Transformation -> Data Target
    Now if you want to load data into data target from Source System Datasource:
    1) Create infopackage for that data source. If you are creating infopackage for new datasources, it will only allow you update upto PSA, all other options u can see as disabled.
    2)Now Create DTP (Data Transfer Process) for that data source.
    3) NOw schdule the Infopackage, once the data is loaded to PSA, you can execute your DTP which will load data to data target.
    If you are loading data from one one data target to other, no need to use PSA, you can directly execute DTP in that case.
    Data Source -> Transformation (IP/DTP) -> Data Target1 -> DTP ->Data Target 2
    Use the below link for detailed example:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fc61e12d-0a01-0010-2883-e2fc63ef729b
    Infosources are no more mandatory with BI 7.0, below is the link to scenarios where we use infosources:
    http://help.sap.com/saphelp_nw04s/helpdata/en/44/0243dd8ae1603ae10000000a1553f6/content.htm
    Full or delta depends on your requirement...
    chk the below thread to know better
    difference between the various loads
    hope it helps
    Message was edited by:
            sriram viswanathan

  • Unexpected query results during large data loads from BCS into BI Cube

    Gurus
    We have had an issue occur twice in the last few months but its causing our business partners a hard point.  When they send a large load of data from BCS to the real time BI Cube the queries are showing unexpected results.  We have the queries enabled to report on yellow requests and that works fine it seems the issue occurs as the system is processing the closing of the request and opening the next request.  Has anyone encountered this issue if so how did you fix it?
    Alex

    Hi Alex,
    There is not enough information to judge. BI queries in BCS may use different structure of real-time, basic, virtual cubes and multiproviders:
    http://help.sap.com/erp2005_ehp_02/helpdata/en/0d/eac080c1ce4476974c6bb75eddc8d2/frameset.htm
    In your case, most likely, you have a bad design of the reporting structures.

  • Steps to create Data loading from Flat File to Info Cube in BI

    Hi,
         I am very new BW, I need some one help. When I am trying to create info source i am any pop window stating to create Transaction data or master data.
         After creating Info source, I dont know how to assign this info source to source system (which i created).
          When select the context menu of info source I dont have option to assign the datasource.
          And one more thing is When I am creating the Info Cube. I cant understand how to create.
          Please some one help me how to map the fields to Source system.
    Regds
    Dave.

    Hi,
    For flat file upload, first you need to create the source system.
    Then you need to create the infosource based on the format of the flat file you are going to upload or vice versa depending on your requirements.
    Once your infosource is ready, right click on it and select assign datasource. Here you can assign your flat file datasource. Then create an infopackage and give the path from where the file is to be upload to BW (in the infopackage).
    Also look at the thread below for procedure on flat file upload :
    http://help.sap.com/saphelp_nw04s/helpdata/en/8e/dbe92341c84242be2c7d3917f1c197/frameset.htm
    Cheers,
    Kedar

  • Need to help in initial data loading from ISU into CRM

    One our client has requirement as
    All ISU data applicable (BP, BA, the appropriate technical data, Contracts, Products, Product Configuration and their correspoinding price Keys and Price Amount) to CRM  should be loaded into CRM as the part of the intial load.
    Eventhough ECRM_GENERATE_EVERH  in ISU but its documentation is not available.
    Is any provision like Report or RFC or function module present in SAP.
    I would appreciate  for you all quick reply with positive and appropriate solution. mailto [email protected]

    Got my answer.We can clear the data using MDX.

  • FROM - TO Dates passed from prompt into the Title of the WEBi report

    What is the right approach to pass two reporting period dates (FROM /TO) from user's input into the Title(Header) of the Universe based WEBi report, like "Tickets submitted from:MM-DD-YY to:MM-DD-YY"
    Maybe this is trivial but it is easier to do in CR and I am not sure how to do it using Universe objects.
    These are my first steps in building real production Universe.
    Thanks in advance!
    Alex

    i dunn know if i understand you well, but it seems like you want to pass 2 dates (from, to) to some report and to have those 2 dates in the report title.
    its too easy, first at the universe level you have to have a Date objects, which comes in the time dimension.
    when you create a report usin Webi, just drag this Objects to the query filter and make the operator "between" and make both of them "prompt"
    give two texts to the prompts lets say "From Date" and "To Date",,,, and run the report.
    at the report design mode there is a function called "UserResponse"
    in the report title text add this =userresponse("From Date")
    you can modify the text as you require.
    good luck
    Amr

  • How we can automate the data loading from BI-BPC

    Dear  Guru's
    Thanks for watching this thread,my question is
                  How we can load the data from BI7.0 to BPC.My environment is SAP-BI 7.0 and BPC is 7.5 MS version and 2008SQL.
    How we can automate the data loading from  BI- BPC Ms version.Is manual flat file load is mandatory in ms version.
    Thanks in Advance,
    Srinivasan.

    Here are some options
    1) Use standars packages and schedule them :
        A) Openhub masterdata file into a flat file/ BPC App server  and Schedule the package - Import Master Data from a Data File and  other relevent packages.
    2 ) Using Custom Tasks in Custom Packages ( SSIS)
    Procedure
    From the Microsoft SQL Server Business Intelligence Developer Studio, open the Microsoft SSIS folder.
    Create a new package, or select an existing package to modify.
    Choose  Task  Register Custom Task .
    In the Task Location field, browse for the target .dll file.
    Note
    By default, the .dll files are stored in BPC/Websrvr/bin.
    End of the note.
    Enter a task description, select an appropriate icon, then click OK.
    Drag the icon to the designer window. Enter data as required.
    Save the package.

  • Data loading from flat file to cube using bw3.5

    Hi Experts,
                       Kindly give  me the detailed steps with screens  about Data loading from flat file to cube using bw3.5
           ...............Please

    Hi ,
    Procedure
    You are in the Data Warehousing Workbench in the DataSource tree.
           1.      Select the application components in which you want to create the DataSource and choose Create DataSource.
           2.      On the next screen, enter a technical name for the DataSource, select the type of DataSource and choose Copy.
    The DataSource maintenance screen appears.
           3.      Go to the General tab page.
                                a.      Enter descriptions for the DataSource (short, medium, long).
                                b.      As required, specify whether the DataSource builds an initial non-cumulative and can return duplicate data records within a request.
                                c.      Specify whether you want to generate the PSA for the DataSource in the character format. If the PSA is not typed it is not generated in a typed structure but is generated with character-like fields of type CHAR only.
    Use this option if conversion during loading causes problems, for example, because there is no appropriate conversion routine, or if the source cannot guarantee that data is loaded with the correct data type.
    In this case, after you have activated the DataSource you can load data into the PSA and correct it there.
           4.      Go to the Extraction tab page.
                                a.      Define the delta process for the DataSource.
                                b.      Specify whether you want the DataSource to support direct access to data.
                                c.      Real-time data acquisition is not supported for data transfer from files.
                                d.      Select the adapter for the data transfer. You can load text files or binary files from your local work station or from the application server.
    Text-type files only contain characters that can be displayed and read as text. CSV and ASCII files are examples of text files. For CSV files you have to specify a character that separates the individual field values. In BI, you have to specify this separator character and an escape character which specifies this character as a component of the value if required. After specifying these characters, you have to use them in the file. ASCII files contain data in a specified length. The defined field length in the file must be the same as the assigned field in BI.
    Binary files contain data in the form of Bytes. A file of this type can contain any type of Byte value, including Bytes that cannot be displayed or read as text. In this case, the field values in the file have to be the same as the internal format of the assigned field in BI.
    Choose Properties if you want to display the general adapter properties.
                                e.      Select the path to the file that you want to load or enter the name of the file directly, for example C:/Daten/US/Kosten97.csv.
    You can also create a routine that determines the name of your file. If you do not create a routine to determine the name of the file, the system reads the file name directly from the File Name field.
                                  f.      Depending on the adapter and the file to be loaded, make further settings.
    ■       For binary files:
    Specify the character record settings for the data that you want to transfer.
    ■       Text-type files:
    Specify how many rows in your file are header rows and can therefore be ignored when the data is transferred.
    Specify the character record settings for the data that you want to transfer.
    For ASCII files:
    If you are loading data from an ASCII file, the data is requested with a fixed data record length.
    For CSV files:
    If you are loading data from an Excel CSV file, specify the data separator and the escape character.
    Specify the separator that your file uses to divide the fields in the Data Separator field.
    If the data separator character is a part of the value, the file indicates this by enclosing the value in particular start and end characters. Enter these start and end characters in the Escape Charactersfield.
    You chose the; character as the data separator. However, your file contains the value 12;45 for a field. If you set u201C as the escape character, the value in the file must be u201C12;45u201D so that 12;45 is loaded into BI. The complete value that you want to transfer has to be enclosed by the escape characters.
    If the escape characters do not enclose the value but are used within the value, the system interprets the escape characters as a normal part of the value. If you have specified u201C as the escape character, the value 12u201D45 is transferred as 12u201D45 and 12u201D45u201D is transferred as 12u201D45u201D.
    In a text editor (for example, Notepad) check the data separator and the escape character currently being used in the file. These depend on the country version of the file you used.
    Note that if you do not specify an escape character, the space character is interpreted as the escape character. We recommend that you use a different character as the escape character.
    If you select the Hex indicator, you can specify the data separator and the escape character in hexadecimal format. When you enter a character for the data separator and the escape character, these are displayed as hexadecimal code after the entries have been checked. A two character entry for a data separator or an escape sign is always interpreted as a hexadecimal entry.
                                g.      Make the settings for the number format (thousand separator and character used to represent a decimal point), as required.
                                h.      Make the settings for currency conversion, as required.
                                  i.      Make any further settings that are dependent on your selection, as required.
           5.      Go to the Proposal tab page.
    This tab page is only relevant for CSV files. For files in different formats, define the field list on the Fields tab page.
    Here you create a proposal for the field list of the DataSource based on the sample data from your CSV file.
                                a.      Specify the number of data records that you want to load and choose Upload Sample Data.
    The data is displayed in the upper area of the tab page in the format of your file.
    The system displays the proposal for the field list in the lower area of the tab page.
                                b.      In the table of proposed fields, use Copy to Field List to select the fields you want to copy to the field list of the DataSource. All fields are selected by default.
           6.      Go to the Fields tab page.
    Here you edit the fields that you transferred to the field list of the DataSource from the Proposal tab page. If you did not transfer the field list from a proposal, you can define the fields of the DataSource here.
                                a.      To define a field, choose Insert Row and specify a field name.
                                b.      Under Transfer, specify the decision-relevant DataSource fields that you want to be available for extraction and transferred to BI.
                                c.      Instead of generating a proposal for the field list, you can enter InfoObjects to define the fields of the DataSource. Under Template InfoObject, specify InfoObjects for the fields in BI. This allows you to transfer the technical properties of the InfoObjects into the DataSource field.
    Entering InfoObjects here does not equate to assigning them to DataSource fields. Assignments are made in the transformation. When you define the transformation, the system proposes the InfoObjects you entered here as InfoObjects that you might want to assign to a field.
                                d.      Change the data type of the field if required.
                                e.      Specify the key fields of the DataSource.
    These fields are generated as a secondary index in the PSA. This is important in ensuring good performance for data transfer process selections, in particular with semantic grouping.
                                  f.      Specify whether lowercase is supported.
                                g.      Specify whether the source provides the data in the internal or external format.
                                h.      If you choose the external format, ensure that the output length of the field (external length) is correct. Change the entries, as required.
                                  i.      If required, specify a conversion routine that converts data from an external format into an internal format.
                                  j.      Select the fields that you want to be able to set selection criteria for when scheduling a data request using an InfoPackage. Data for this type of field is transferred in accordance with the selection criteria specified in the InfoPackage.
                                k.      Choose the selection options (such as EQ, BT) that you want to be available for selection in the InfoPackage.
                                  l.      Under Field Type, specify whether the data to be selected is language-dependent or time-dependent, as required.
           7.      Check, save and activate the DataSource.
           8.      Go to the Preview tab page.
    If you select Read Preview Data, the number of data records you specified in your field selection is displayed in a preview.
    This function allows you to check whether the data formats and data are correct.
    For More Info:  http://help.sap.com/saphelp_nw70/helpdata/EN/43/01ed2fe3811a77e10000000a422035/content.htm

  • Data loading from DSO to Cube

    Hi,
    I have a question,
    In book TBW10 i read about the data load from DSO to InfoCube
    " We feed the change log data to the InfoCube, 10, -10, and 30 add to the correct 30 value"
    My question is cube already have 10 value, if we are sending 10, -10 and 30 Values(delta), the total should be 40 instead of 30.
    Please some one explaine me.
    Thanks

    No, it will not be 40.
    It ll be 30 only.
    Since cube already has 10, so before image ll nullify it by sending -10 and then the correct value in after immage ll be added as 30.
    so it ll be like this 10-10+30 = 30.
    Thank-You.
    Regards,
    Vinod

  • Summing up key figure in Cube - data load from ODS

    Hello Gurus,
    I am doing a data load from ODS to cube.
    The records in ODS are at line-item level, and all needs to be summed up at header level. There is only one key-figure. ODS has header and line-item fields.
    I am loading only header field data ( and not the item-field data) from ODS to Cube.
    I am expecting only-one record in cube ( for all the item-level records) with all the key-figures summed up. But couldn't see that.
    Can anyone please explain how to achieve it.
    I promise to reward points.
    =====
    Example to elaborate my point.
    In ODS
    Header-field  item-field   quantity
    123                301          10
    123                302           20
    123                303           30
    Expected record in Cube
    Header-field       Quantity
       123                    60  
    ====================
    Regards,
    Pramod.

    Hello Oscar and Paolo.
    Thanks for the reply. I am using BW 7.0
    Paolo suggested:
    >>If you don't add item number to cube and put quantity as adition in update rules >>from ODS to cube it works.
    I did that still I get 3 records in cube.
    Oscar Suggested:
    >>What kind of aggregate do you have for your key figure in update rules (update >>or no change)?
    It is "summation". And it cannot be changed. (Or at least I do not know how to change it.)
    There are other dimensions in the cube - which corresponds to the field(s) in ODS.
    But, I just mentioned these two (i.e. header and item-level) for simplicity.
    Can you please help?
    Thank you.
    Pramod.

  • BPC:: Master data load from BI Process chain

    Hi,
    we are trying to automatize the master data load from BI.
    Now we are using a package with:
    PROMPT(INFILES,,"Import file:",)
    PROMPT(TRANSFORMATION,%TRANSFORMATION%,"Transformation file:",,,Import.xls)
    PROMPT(DIMENSIONNAME,%DIMNAME%,"Dimension name:",,,%DIMS%)
    PROMPT(RADIOBUTTON,%WRITEMODE%,"Write Mode",2,{"Overwirte","Update"},{"1","2"})
    INFO(%TEMPNO1%,%INCREASENO%)
    INFO(%TEMPNO2%,%INCREASENO%)
    TASK(/CPMB/MASTER_CONVERT,OUTPUTNO,%TEMPNO1%)
    TASK(/CPMB/MASTER_CONVERT,FORMULA_FILE_NO,%TEMPNO2%)
    TASK(/CPMB/MASTER_CONVERT,TRANSFORMATIONFILEPATH,%TRANSFORMATION%)
    TASK(/CPMB/MASTER_CONVERT,SUSER,%USER%)
    TASK(/CPMB/MASTER_CONVERT,SAPPSET,%APPSET%)
    TASK(/CPMB/MASTER_CONVERT,SAPP,%APP%)
    TASK(/CPMB/MASTER_CONVERT,FILE,%FILE%)
    TASK(/CPMB/MASTER_CONVERT,DIMNAME,%DIMNAME%)
    TASK(/CPMB/MASTER_LOAD,INPUTNO,%TEMPNO1%)
    TASK(/CPMB/MASTER_LOAD,FORMULA_FILE_NO,%TEMPNO2%)
    TASK(/CPMB/MASTER_LOAD,DIMNAME,%DIMNAME%)
    TASK(/CPMB/MASTER_LOAD,WRITEMODE,%WRITEMODE%)
    But we need to include these tasks into a BI process chain.
    How can we add the INFO statement into a process chain?
    And how can we declare the variables?
    Regards,
    EZ.

    Hi,
    i have followed your recomendation, but when i try to use the process /CPMB/MASTER_CONVERT, with the parameter TRANSFORMATIONFILEPATH and the root of the transformation file as value, i have a new problem. The value only have 60 char, and my root is longer:
    \ROOT\WEBFOLDERS\APPXX\PLANNING\DATAMANAGER\TRANSFORMATIONFILES\trans.xls
    How can we put this root???
    Regards,
    EZ.

  • TT Issue "9994 Loading data store from disk into RAM in progress"

    Getting this strange issue. Sometimes (2-3 times a day) TT just becomes unavailable and when trying to connect to it getting "9994 Loading data store from disk into RAM in progress".
    Any advise on what the root cause for this behavior might be?

    In all likelihood this is exactly what it sounds like - your datastore is being reloaded from disk into memory. Connections can't be completed until the datastore has gone through recovery and is fully in-memory. You need to look back through your ttmesg.log files and find out why the datastore was taken out of memory in the first place. Possibly there's been a crash and it has been invalidated, meaning it needs to be recovered from the checkpoint files and transaction logs. Or maybe there were no user connections and it was taken out of memory and checkpointed to disk in a normal, controlled fashion. The ttmesg.log files will tell you what happened.

  • Full load from a DSO to a cube processes less records than available in DSO

    We have a scenario, where every Sunday I have to make a full load from a DSO with OnHand Stock information to a cube, where I register on material and stoer level a counter if there is stock available.
    The DTP has no filters at all and has a semantic group on 0MATERIAL and 0PLANT.
    The key in the DSO is:
    0MATERIAL
    0PLANT
    0STOCKTYPE
    0STOR_LOC
    0BOM
    of which only 0MATERIAL, 0PLANT and 0STORE_LOC are later used in the transformation.
    As we had a growing number of records, we decided to delete in the START routine all records, where the inventory is not GT zero, thus eliminating zero and negative inventory records.
    Now comes the funny part of the story:
    Prior to these changes I would [in a test system, just copied from PROD] read some 33 million of records and write out the same amount of records. Of course, after the change we expected to write out less. To my total surprise I was reading now however 45 million of records with the same unchanged DTP, and writing out the expected less records.
    When checking the number of records in the DSO I found the 45 million, but cannot explain why in the loads before we only retrieved some 33 millions from the same unchanged amount of records.
    When checking in PROD - same result: we have some 45 million records in the DSO, but when we do the full load from the DSO to the cube the DTP only processes some 33 millions.
    What am I missing - is there a compression going on? Why would the amount of records in a DSO differ from the amount of records processed in the DataPackgages when I am making a FULL load without any filter restrictions and only a semantic grouping in place for parts of the DSO key?
    ANY idea, thought is appreciated.

    Thanks Gaurav.
    I did check if there were more/any loads doen inbetween - there were none in the test system.  As I mentioned that it was a new copy from PROD to TEST, I compared the number of entries in the DSO and that seems to be a match between TEST and PROD, ok a some more in PROD but they can be accounted for. In test I loaded the day before the changes were imported to have a comparison, and between that load and the one ofter the changes were imported nothing in the DSO was changed.
    Both DTPs in TEST and PW2 load from actived DSO [without archive]. The DTPs were not changed in quite a while - so I ruled that one out. Same with activation of data in the DSO - this DSO get's loaded and activated in PROD daily via process chain and we load daily deltas into the cube in question. Only on Sundays, for the begin of the new week/fiscal period, we need to make a full load to capture all materials per site with inventory. The deltas loaded during the week are less than 1 million, but the difference between the number of records in the DSO and the amount processed in the DataPackages is more than 10 millions per full load even in PROD.
    I really appreciated the knowledgable answer, I just wished you would pointed out something that I missed out on.

Maybe you are looking for

  • How to create the patch file for Printer installation?

    Hi, Recently I bought a network printer and really want to install printer via the batch file, but I don't know how and what command needs to be typed in Notepad. Could you please give me some templates for this? Thanks,

  • How can I customize default alerts in Calendar?

    I would like Calendar to put a default email alert on every new event. I can do it individually with each event but I can't make it a default. What I want is for Calendar to email me an alert the day after an event. I have managed to be able to get C

  • How do i import a large organised library from NAS into iPhoto without it re-organising my photos?

    I have a large library of photos, (20,000 or so photos - 58 GB) stored on my NAS Drive, they are organised into yearly folders, and then individual event folders, among other folders such as 'favorites'. When i click import, and leave it to do its th

  • ProgressBar For uploading File, C#

    How Can I make a ProgressBar for uploading/downloading file to/from DataBase using C#?? Desktop Application

  • Content Server 4 and RMSDK

    Does RMSDK come with Content Server 4? The company I work for is looking to open its own eBooks market place. The books have to be DRM'ed, so they are considering the use of Content Server 4. does RMSDK require a different license (and cost) that con