Data load from workrequest to work order in enetrprise asset management(eAM

Hi all,
I want to load data from work request to work work order in enterprise asset management(eAM) module.
Pls send me any body having code for EAM_PROCESS_WO_PUB API
Thanks&Regards,
Hanimi

Aditya,
[Here's|Operation user status of work order; a similar post with useful info
PeteA

Similar Messages

  • Error is data loading from 3rd party source system with DBCONNECT

    Hi,
    We have just finished an upgrade of SAP BW 3.10 to SAP NW 7.0 EHP1.
    After the upgrade, we are facing a problem with data loads from a third party Oracle source system using DBConnect.
    The connection is working OK and we can see the tables in the source system. But we cannot load the data.
    The error in the monitor is as follows:
    'Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.'
    But, unfortunately, the error message has no further information.
    If we look at the job log in sm37, the job finished with the following log -                                                                               
    27.10.2009 12:14:19 Job started                                                                                00           516          S 
    27.10.2009 12:14:19 Step 001 started (program RSBATCH1, variant &0000000000119, user ID RXSAHA)                    00           550          S 
    27.10.2009 12:14:23 Start InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG                                              RSM1          797          S 
    27.10.2009 12:14:24 Element NOAUTHORITYCHECK is not available in the container                                     OL           356          S 
    27.10.2009 12:14:24 InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG created request REQU_4FMXSQ6TLSK5CYLXPBOGKF31G     RSM1          796          S 
    27.10.2009 12:14:24 Job finished                                                                                00           517          S 
    In a BW 3.10 system, there is no  message related to element NOAUTHORITYCHECK. So, I am wondering if this is something new in NW 7.0.
    Thanks in advance,
    Rajib

    There will be three things to get the errors like this
    1.RFC CONNECTION FAILED
    2.CHECK THE SOURCE SYSTEM
    3.CHECK IT OUT WITH Oracle Consultants WEATHER THEY ARE FILLING UP THE LOADS.TELL THEM TO STOP
    4.CHECK I DOC PROCESSING
    5.FINALLY MEMORY ISSUES.
    6.CATCH THE DATA SOURCE FIRST CHANGE IT AND THEN ACTIVATE AND RUN THE LOAD
    7.LAST IS MEMORY ISSUE.
    and also Check the RFC connection in SM59 If  it is ok then
    check the SAP note : 692195 for authorization
    Santosh

  • How to find the data loaded from r/3 to bw

    hi
    how to find the data loaded from r/3 to bw is correct . i am not able to find which feild in the query is connected to which feild in the r/3 . where i am geting the data from r/3 . is there any process to find which feild  and table the data is comming from . plz help
    thanks in advance to u all

    Hi Veda ... the mapping between R/3 fields and BW InfoObjects should take place in Transfer Rules. Other transformation could take place in Update Rule.
    So you could proceed this way: look at InfoProvider Data Model and see if the Query does perform any calculation (even with Virtual keyfigures / chars). Than go back to Update Rules and search for other calculation / transformation. At least there are Tranfer Rule and eventually DataSource / Extraction Enhancements.
    As you can easily get there are many points where you have to look for ... it's a quite complex work but very usefull.
    Once you will have identified all mappings / transfromation see if BW data matchs R/3 (considering calculations ...)
    Good job
    GFV

  • Number of parallel process definition during data load from R/3 to BI

    Dear Friends,
    We are using Bi7.00. We have a requirement in which i should increase the number of parallel process during data load from R/3 to BI.  I want to modify this for a particular data source and check.Can experts provide helpful answers for the following question.
    1) When load is taking place or have taken place, where can we see how many parallel process that particular load has taken.
    2) Where should i change the setting for the number of parallel process for data load (from R/3 to BI) and not within BI.
    3) How system works and what will be net result of increasing or decreasing the number of parallel process.
    Expecting Experts help.
    Regards,
    M.M

    Dear Des Gallagher,
    Thank you very much for the useful information provided. The following was my observation.
    From the posts in this forum, i was given to understand that the setting for specific data source can be done in the infopackage and DTP level, i carried out the same and found that there is no change in the load, i.e., system by default takes only one parallel process even though i maintained 6.
    Can you kindly explain about the above mentioned point. i.e.,
    1) Even though the value is maintained in the infopackage level , will system consider it or not. -> if not then from which transaction system is able to derive the 1 parallel process.
    Actually we wanted to increase the package size but we failed because i could not understand what values have to be maintained  -> can you explain in detail
    Can you calrify my doubt and provide solution?
    Regards,
    M.M

  • Data loading from flat file to cube using bw3.5

    Hi Experts,
                       Kindly give  me the detailed steps with screens  about Data loading from flat file to cube using bw3.5
           ...............Please

    Hi ,
    Procedure
    You are in the Data Warehousing Workbench in the DataSource tree.
           1.      Select the application components in which you want to create the DataSource and choose Create DataSource.
           2.      On the next screen, enter a technical name for the DataSource, select the type of DataSource and choose Copy.
    The DataSource maintenance screen appears.
           3.      Go to the General tab page.
                                a.      Enter descriptions for the DataSource (short, medium, long).
                                b.      As required, specify whether the DataSource builds an initial non-cumulative and can return duplicate data records within a request.
                                c.      Specify whether you want to generate the PSA for the DataSource in the character format. If the PSA is not typed it is not generated in a typed structure but is generated with character-like fields of type CHAR only.
    Use this option if conversion during loading causes problems, for example, because there is no appropriate conversion routine, or if the source cannot guarantee that data is loaded with the correct data type.
    In this case, after you have activated the DataSource you can load data into the PSA and correct it there.
           4.      Go to the Extraction tab page.
                                a.      Define the delta process for the DataSource.
                                b.      Specify whether you want the DataSource to support direct access to data.
                                c.      Real-time data acquisition is not supported for data transfer from files.
                                d.      Select the adapter for the data transfer. You can load text files or binary files from your local work station or from the application server.
    Text-type files only contain characters that can be displayed and read as text. CSV and ASCII files are examples of text files. For CSV files you have to specify a character that separates the individual field values. In BI, you have to specify this separator character and an escape character which specifies this character as a component of the value if required. After specifying these characters, you have to use them in the file. ASCII files contain data in a specified length. The defined field length in the file must be the same as the assigned field in BI.
    Binary files contain data in the form of Bytes. A file of this type can contain any type of Byte value, including Bytes that cannot be displayed or read as text. In this case, the field values in the file have to be the same as the internal format of the assigned field in BI.
    Choose Properties if you want to display the general adapter properties.
                                e.      Select the path to the file that you want to load or enter the name of the file directly, for example C:/Daten/US/Kosten97.csv.
    You can also create a routine that determines the name of your file. If you do not create a routine to determine the name of the file, the system reads the file name directly from the File Name field.
                                  f.      Depending on the adapter and the file to be loaded, make further settings.
    ■       For binary files:
    Specify the character record settings for the data that you want to transfer.
    ■       Text-type files:
    Specify how many rows in your file are header rows and can therefore be ignored when the data is transferred.
    Specify the character record settings for the data that you want to transfer.
    For ASCII files:
    If you are loading data from an ASCII file, the data is requested with a fixed data record length.
    For CSV files:
    If you are loading data from an Excel CSV file, specify the data separator and the escape character.
    Specify the separator that your file uses to divide the fields in the Data Separator field.
    If the data separator character is a part of the value, the file indicates this by enclosing the value in particular start and end characters. Enter these start and end characters in the Escape Charactersfield.
    You chose the; character as the data separator. However, your file contains the value 12;45 for a field. If you set u201C as the escape character, the value in the file must be u201C12;45u201D so that 12;45 is loaded into BI. The complete value that you want to transfer has to be enclosed by the escape characters.
    If the escape characters do not enclose the value but are used within the value, the system interprets the escape characters as a normal part of the value. If you have specified u201C as the escape character, the value 12u201D45 is transferred as 12u201D45 and 12u201D45u201D is transferred as 12u201D45u201D.
    In a text editor (for example, Notepad) check the data separator and the escape character currently being used in the file. These depend on the country version of the file you used.
    Note that if you do not specify an escape character, the space character is interpreted as the escape character. We recommend that you use a different character as the escape character.
    If you select the Hex indicator, you can specify the data separator and the escape character in hexadecimal format. When you enter a character for the data separator and the escape character, these are displayed as hexadecimal code after the entries have been checked. A two character entry for a data separator or an escape sign is always interpreted as a hexadecimal entry.
                                g.      Make the settings for the number format (thousand separator and character used to represent a decimal point), as required.
                                h.      Make the settings for currency conversion, as required.
                                  i.      Make any further settings that are dependent on your selection, as required.
           5.      Go to the Proposal tab page.
    This tab page is only relevant for CSV files. For files in different formats, define the field list on the Fields tab page.
    Here you create a proposal for the field list of the DataSource based on the sample data from your CSV file.
                                a.      Specify the number of data records that you want to load and choose Upload Sample Data.
    The data is displayed in the upper area of the tab page in the format of your file.
    The system displays the proposal for the field list in the lower area of the tab page.
                                b.      In the table of proposed fields, use Copy to Field List to select the fields you want to copy to the field list of the DataSource. All fields are selected by default.
           6.      Go to the Fields tab page.
    Here you edit the fields that you transferred to the field list of the DataSource from the Proposal tab page. If you did not transfer the field list from a proposal, you can define the fields of the DataSource here.
                                a.      To define a field, choose Insert Row and specify a field name.
                                b.      Under Transfer, specify the decision-relevant DataSource fields that you want to be available for extraction and transferred to BI.
                                c.      Instead of generating a proposal for the field list, you can enter InfoObjects to define the fields of the DataSource. Under Template InfoObject, specify InfoObjects for the fields in BI. This allows you to transfer the technical properties of the InfoObjects into the DataSource field.
    Entering InfoObjects here does not equate to assigning them to DataSource fields. Assignments are made in the transformation. When you define the transformation, the system proposes the InfoObjects you entered here as InfoObjects that you might want to assign to a field.
                                d.      Change the data type of the field if required.
                                e.      Specify the key fields of the DataSource.
    These fields are generated as a secondary index in the PSA. This is important in ensuring good performance for data transfer process selections, in particular with semantic grouping.
                                  f.      Specify whether lowercase is supported.
                                g.      Specify whether the source provides the data in the internal or external format.
                                h.      If you choose the external format, ensure that the output length of the field (external length) is correct. Change the entries, as required.
                                  i.      If required, specify a conversion routine that converts data from an external format into an internal format.
                                  j.      Select the fields that you want to be able to set selection criteria for when scheduling a data request using an InfoPackage. Data for this type of field is transferred in accordance with the selection criteria specified in the InfoPackage.
                                k.      Choose the selection options (such as EQ, BT) that you want to be available for selection in the InfoPackage.
                                  l.      Under Field Type, specify whether the data to be selected is language-dependent or time-dependent, as required.
           7.      Check, save and activate the DataSource.
           8.      Go to the Preview tab page.
    If you select Read Preview Data, the number of data records you specified in your field selection is displayed in a preview.
    This function allows you to check whether the data formats and data are correct.
    For More Info:  http://help.sap.com/saphelp_nw70/helpdata/EN/43/01ed2fe3811a77e10000000a422035/content.htm

  • Summing up key figure in Cube - data load from ODS

    Hello Gurus,
    I am doing a data load from ODS to cube.
    The records in ODS are at line-item level, and all needs to be summed up at header level. There is only one key-figure. ODS has header and line-item fields.
    I am loading only header field data ( and not the item-field data) from ODS to Cube.
    I am expecting only-one record in cube ( for all the item-level records) with all the key-figures summed up. But couldn't see that.
    Can anyone please explain how to achieve it.
    I promise to reward points.
    =====
    Example to elaborate my point.
    In ODS
    Header-field  item-field   quantity
    123                301          10
    123                302           20
    123                303           30
    Expected record in Cube
    Header-field       Quantity
       123                    60  
    ====================
    Regards,
    Pramod.

    Hello Oscar and Paolo.
    Thanks for the reply. I am using BW 7.0
    Paolo suggested:
    >>If you don't add item number to cube and put quantity as adition in update rules >>from ODS to cube it works.
    I did that still I get 3 records in cube.
    Oscar Suggested:
    >>What kind of aggregate do you have for your key figure in update rules (update >>or no change)?
    It is "summation". And it cannot be changed. (Or at least I do not know how to change it.)
    There are other dimensions in the cube - which corresponds to the field(s) in ODS.
    But, I just mentioned these two (i.e. header and item-level) for simplicity.
    Can you please help?
    Thank you.
    Pramod.

  • Data loading from DSO to Cube

    Hi,
    I have a question,
    In book TBW10 i read about the data load from DSO to InfoCube
    " We feed the change log data to the InfoCube, 10, -10, and 30 add to the correct 30 value"
    My question is cube already have 10 value, if we are sending 10, -10 and 30 Values(delta), the total should be 40 instead of 30.
    Please some one explaine me.
    Thanks

    No, it will not be 40.
    It ll be 30 only.
    Since cube already has 10, so before image ll nullify it by sending -10 and then the correct value in after immage ll be added as 30.
    so it ll be like this 10-10+30 = 30.
    Thank-You.
    Regards,
    Vinod

  • Date Deviates from permissible range [Purchase Order - Value Date]

    hello all,
    i want to add a Purchase Order (Services) Posting date 05/07/2008 and Delivery Date is 09/30/2008, it prompts me the Error "Date Deviates from permissible range [Purchase Order - Value Date]", now this is my question.
    what is the date range for PO posting date and delivery date that the system will allow(date difference)? can i set this one?
    Note: we need to make an advance PO for this since our BP required this time period for them to accomplished.
    Please help.
    Thanks.
    FIDEL

    FIDEL,
    All documents have 3 dates DocDate, DocDueDate, TaxDate.  The date ranges for these dates are taken from the Active Posting period definition.
    Open Administration  > System Initialization  > General Settings > Posting Periods
    Click on the Yellow link arrow next to the current posting period and check the Due Date From and To Range and expand the To date to cover 09/30/2008
    Posting Date From
    Due Date From
    Document Date From
    Suda

  • How we can automate the data loading from BI-BPC

    Dear  Guru's
    Thanks for watching this thread,my question is
                  How we can load the data from BI7.0 to BPC.My environment is SAP-BI 7.0 and BPC is 7.5 MS version and 2008SQL.
    How we can automate the data loading from  BI- BPC Ms version.Is manual flat file load is mandatory in ms version.
    Thanks in Advance,
    Srinivasan.

    Here are some options
    1) Use standars packages and schedule them :
        A) Openhub masterdata file into a flat file/ BPC App server  and Schedule the package - Import Master Data from a Data File and  other relevent packages.
    2 ) Using Custom Tasks in Custom Packages ( SSIS)
    Procedure
    From the Microsoft SQL Server Business Intelligence Developer Studio, open the Microsoft SSIS folder.
    Create a new package, or select an existing package to modify.
    Choose  Task  Register Custom Task .
    In the Task Location field, browse for the target .dll file.
    Note
    By default, the .dll files are stored in BPC/Websrvr/bin.
    End of the note.
    Enter a task description, select an appropriate icon, then click OK.
    Drag the icon to the designer window. Enter data as required.
    Save the package.

  • Additional Data's WBS Element of Work Order

    Hello,
    I need to fetch the Additional Data's WBS Element for work orders (PM module) and then also apply the change functionality to it.
    Any BAPI or Function Module available for the same.
    Can someone help me on that?

    Hi,
    Please use the following steps as reference:
    1.Go to T-Code pfcg
    2.Create a Role by giving a name say “ZPSTEST”
    3.Click on Authorization tab
    4.You will be asked to save the profile first
    5.Go to “ Change authorization data”
    6.Choose “SAP_ALL” and adopt reference.
    7.Confirm “ Yes” to insert all authorization
    8.Go and expand the link “project system”
    9.Expand the link “ PS: Project Manager for Project Definition”
    10.Here you will see two fields “ Activity for Authorization che” and Number of responsible per”
    11.Click on change button on the first field.
    12.Here click on “Cancel full authorization”
    13.Now, here you can choose what all functions you want to assign for this authorization Role.
    14.Choose say “ Display” and save
    15.Click on “ Number of responsible person” and choose any person , say “ XYZ”
    16.Now the authorization role is ready. This setting will ensure that any person who is assigned this role will only be able to “Display” the projects , if the responsible person is “XYZ”
    17.Go back to the pervious screen. In the process” Generate” the profile also.
    18.Once you are in “Change Roles” Screen, go to tab “USER”. Here you can assign this role ZPSTEST to various users.
    Reward points if useful.
    Regards

  • Auto-update Notification from a PM Work Order?

    Hi,
    Is there a way of automatically updating info on a Notification from a PM Work Order? For example, the operator who creates a Notification puts in a wrong functional location and this is carried over to the Work Order that is created from the notification. While, the work is being executed, the Work Order processor will change the Func. Location to indicate the right one. But this does not reflect on the Notification. I am sure this is not config. Is there any bapi that I can use? Please advise.
    Regards,
    Arun

    These are some related Function Modules:
    IQS0_CHANGE_NOTIFICATION
    ALM_ME_NOTIFICATION_CHANGE
    BAPI_ALM_NOTIF_DATA_MODIFY
    ALM_PM_MAINTNOT_MODIFY_DATA
    You may consult your ABAPer to identify and use to suit to your needs.
    Logic will be the code will match the F/Locn in Order and Notification everytime the Order is updated and use the above FM to update the Notification. Obviously you need to use this logic in a User-exit possibly IWO10009.
    KJogeswaraRao

  • Data load from R3 is slow and gives rfc connection error

    Hi all, is there any debug capabilties available on BI 7.0 when it comes to debug data load from R3 using rfc connection ( aleremote and bwiremote users )
    any ideas where can I look for solution.
    thanks.

    Hi,
    Check the connection between the R/3 and BW.
    or It may be the network problem contact system admin or basis people.
    thanks,
    dru

  • BPC:: Master data load from BI Process chain

    Hi,
    we are trying to automatize the master data load from BI.
    Now we are using a package with:
    PROMPT(INFILES,,"Import file:",)
    PROMPT(TRANSFORMATION,%TRANSFORMATION%,"Transformation file:",,,Import.xls)
    PROMPT(DIMENSIONNAME,%DIMNAME%,"Dimension name:",,,%DIMS%)
    PROMPT(RADIOBUTTON,%WRITEMODE%,"Write Mode",2,{"Overwirte","Update"},{"1","2"})
    INFO(%TEMPNO1%,%INCREASENO%)
    INFO(%TEMPNO2%,%INCREASENO%)
    TASK(/CPMB/MASTER_CONVERT,OUTPUTNO,%TEMPNO1%)
    TASK(/CPMB/MASTER_CONVERT,FORMULA_FILE_NO,%TEMPNO2%)
    TASK(/CPMB/MASTER_CONVERT,TRANSFORMATIONFILEPATH,%TRANSFORMATION%)
    TASK(/CPMB/MASTER_CONVERT,SUSER,%USER%)
    TASK(/CPMB/MASTER_CONVERT,SAPPSET,%APPSET%)
    TASK(/CPMB/MASTER_CONVERT,SAPP,%APP%)
    TASK(/CPMB/MASTER_CONVERT,FILE,%FILE%)
    TASK(/CPMB/MASTER_CONVERT,DIMNAME,%DIMNAME%)
    TASK(/CPMB/MASTER_LOAD,INPUTNO,%TEMPNO1%)
    TASK(/CPMB/MASTER_LOAD,FORMULA_FILE_NO,%TEMPNO2%)
    TASK(/CPMB/MASTER_LOAD,DIMNAME,%DIMNAME%)
    TASK(/CPMB/MASTER_LOAD,WRITEMODE,%WRITEMODE%)
    But we need to include these tasks into a BI process chain.
    How can we add the INFO statement into a process chain?
    And how can we declare the variables?
    Regards,
    EZ.

    Hi,
    i have followed your recomendation, but when i try to use the process /CPMB/MASTER_CONVERT, with the parameter TRANSFORMATIONFILEPATH and the root of the transformation file as value, i have a new problem. The value only have 60 char, and my root is longer:
    \ROOT\WEBFOLDERS\APPXX\PLANNING\DATAMANAGER\TRANSFORMATIONFILES\trans.xls
    How can we put this root???
    Regards,
    EZ.

  • HT1725 Dowon loads from store never work.... wasted time and money

    Dowon loads from store never work.... wasted time and money

    Thanks for reading and thanks for the advice. Perhaps I'll ask them about it next time this problem occurs, although carrying the thing through a mall that is only about a mile away is the least of my worries. I'll do if it is both free (I don't make enough at my job to pay for such a service) and relatively speedy, although I'd hate for them to come over and for the computer to work properly (as bad as that sounds). It'd be a wasted trip and nothing would get fixed.
    I'm contemplating videotaping myself performing my "fixes" on it the next time I have this problem.

  • Automated data load from APO to SEM transactional cube

    Hi ,
    We have BW-SEM system integrated with APO system.
    I could see automated data loads from APO to SEM transactional cube ..
    Infopackage name as "Request loaded using the APO interface without monitor log" ..
    I don't see any infopackage by this name in both the systems ( APO & SEM )..
    I am not sure how it configured ..
    Appreciate any inputs on how its happens .....
    Thanks in advance

    Hi,
    As I mentioned the starting point will be the tcode BPS0. There will be 2 planning areas created (if I am correct) one for SEM cube and the other for APO cube. The better way to find it will be goto tcode se16 and enter UPC_BW_AREA and key in the cube names in the cube field. this will give you the planning area names now look for a multiplanning area which has the 2 areas included in them (this is available in table UPC_AREAM).
    then goto BPS0 and you will have to find which function is being used to post the data.
    thanks

Maybe you are looking for

  • Two Questions about Airport Express

    All, I am a recent convert to using a Mac so bear with me. I have two questions about the Airport Express. Question if I buy one in the USA, I will visiting this week on holiday,can I use it the UK with a UK adaptor/apple plug? Can the Express be use

  • Why won't my movies play?

    Hello, I have downloaded a film using iTunes, I watched it once and now it will not play again, I bought this film not rented it, can anyone please tell me how I can play it again? I've been in my videos but it will only let me stop the film not play

  • Loading the data from essbase studio to the cube

    I am building application using Essbase studio 11.1.2 I have been able too create the hierarchies, but I am not clear on the process of assigning the data piece. In this instance all data is in a table named "FullPolicyCount" What is the process for

  • Motion JPEG AVI codec unsupported by Adobe Premiere Pro CS4?

    Hello everyone, First of all I must say English isn't my native language. Forgive me if I make any spelling mistakes or if I write inpolitely, it's not on intention. I have a couple of videos made with a camera. The videos have an .avi extension and

  • Every-time I try to open my Premiere Pro project in Audition it crashes. What is the problem?

    Every-time when I want to open my premiere pro  project in Audition to work on the audio, Premiere Pro crashes. What is the problem? Thank you, Maruf