Data load is very slow

Hi Experts,
I am working on CRM Analytic. I am loading address data from extractor 0BP_DEF_ADDRESS_ATTR to Business partner, with 19 lakhs records. When I execute the DTP it is taking 3 to 4 days to complete the load.
Please provide me solution so that my data load will become fast.
With Regards,
Avenai

Hi,
Increase the Number of parallel processes.
in order to increase parallel processes --> from menu of DTP -> goto -> "settings for batch manager" -> increase the Number of parallel processes (by default it will be 3 increase it to 6).
Increase the Datapacket size in the DTp -extraction tab.
Do you have any routines used in the transfromations? if yes try to debug the code where its taking time, find n try to fine tune the code with the help of ABAP person.
Below option may also be one of the reasons while using CRM data sources...
The data source consists of lots of fields which are not used or mapped in the transformation ... try to hide those fields or you can create a copy of your data source using BWA1 transaction in CRM system.
Regards
KP

Similar Messages

Data load becomes very slow

Hi,after a migration from Version 5 to 6.5 the dataload becomes very slow.With V5 the dataload takes 1 hour, with 6.5 it takes about 3 hours.the calculation takes the same time.Any idea?

To many sub VIs could not be found so I can not give you more than some advises. But I see that you run all your loops at full speed. I do not think it is very wise. Insert the "wait (ms)" functions in all while loops, but not the loops handling the daq functions. Since they are controlled by a occurrence. In Loops handling user input only you may set the wait time as high as 500ms. In more important loops use shorter time.
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Master Data loading is very slow.

Hi Experts,
I have scheduled Master Data Attribute Process Chain daily. 0employee_attr, infoObject is having only 487315 & it is taking more than 12 hrs. There are number of infoobjects are much bigger is taking 10 minutes only. 0Employee attr in increasing 5-10 records daily only. Earlier it was taking 4-5 hours.
Regards,
Anand Mehrotra.

Hi,
You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract teh data from ECC, so add tehse profiels in BW.
S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
See in SDN
Re: Loading error in the production system
Thanks
Reddy

Facebook loading is very slow with nearly no images , i'm using mac

facebook loading is very slow with nearly no images , i'm using mac os x 10.8

i did it many times and the same problem exists

Youtube app loads videos very slow On my ipad mini

Youtube app loads videos very slow On my ipad mini . I can let it buffer for 10 seconds, it plays and then stops because it has to buffer again and convert the video in very poor quality. i have 20mb internet connection. my sofware version is iOS 6.1.3

Check your internet upload speed. You probably have a very slow speed.
https://itunes.apple.com/sg/app/speedtest.net-mobile-speed/id300704847?mt=8

Internal Disk to Disk Data Transfer Speed Very Slow

I have a G5 Xserve running Tiger with all updates applied that has recently started experiencing very slow Drive to Drive Data transfer speeds.
When transferring data from one drive to another ( Internal to Internal, Internal to USB, Internal, Internal to FW, USB to USB or any other combination of the three ) we only are getting about 2GB / hr transfer speeds.
I initially thought the internal drive was going bad. I tested the drive and found some minor header issues etc... that were able to be repaired so I replace the internal boot drive
I tested and immediately got the same issue.
I also tried booting from a FW drive and I got the same issue.
If I connect to the server over the ethernet network, I get what I would expect to be typical data transfer rates of about 20GB+ / hr. Much higher than the internal rates and I am copying data from the same internal drives so I really don't think the drive is the issue.
I called AppleCare and discussed the issue with them. They said it sounded like a controller issue so I purchased a replacement MLB from them. After replacing the drive data transfer speeds jumped back to normal for about a day maybe two.
Now we are back to experiencing slow data transfer speeds internally ( 2GB / hr ) and normal transfer speeds ( 20GB+ / hr ) over the network.
Any ideas on what might be causing the problem would be appreciated

As suggested, do check for other I/O load on the spindles. And check for general system load.
I don't know of a good GUI in-built I/O monitor here (and particularly for Tiger Server), though there is iopending and DTrace and Apple-provided [performance scripts|http://support.apple.com/kb/HT1992] with Leopard and Leopard Server. top would show you busy processes.
Also look for memory errors and memory constraints and check for anything interesting in the contents of the system logs.
The next spot after the controllers (and it's usually my first "hardware" stop for these sorts of cases, and usually before swapping the motherboard) are the disks that are involved, and whatever widgets are in the PCI slots. Loose cables, bad cables, and spindle-swaps. Yes, disks can sometimes slow down like this, and that's not usually a Good Thing. I know you think this isn't the disks, but that's one of the remaining common hardware factors. And don't presume any SMART disk monitoring has predictive value; SMART can miss a number of these cases.
(Sometimes you have to use the classic "field service" technique of swapping parts and of shutting down software pieces until the problem goes away. Then work from there.)
And the other question is around how much time and effort should be spent on this Xserve G5 box; whether you're now in the market for a replacement G5 box or a newer Intel Xserve box as a more cost-effective solution.
(How current and how reliable is your disk archive?)

Data Services Designer - Very Slow on VPN

Hello,
Any idea why Data Services Designer is very slow and many a times goes into Not Responding state. I'm using this client tool to connect to the Data Services Repository + Servers via VPN.
It takes few minutes to load the jobs or to save the changes. Some times hangs.
Wanted to know if anyone is facing similar issues, and any workaround/setup changes to eliminate these delays...
Regards,
Madan
Edited by: Madan Mohan Reddy Zollu on Mar 12, 2010 9:24 AM

Data Services Designer is communicating with the repo (to store/retrieve objects) and the jobserver (to execute jobs and get status/log files) so if there is a slow network connection, response time in the Designer could become problematic.
One way to solve this is use CITRIX or terminal services to have your Designer close to the database and only screens are send over the slow connection. In the Windows installation guide there is a chapter that documents how to setupDesigner in a (multi-user) Citrix environment.

Page loading is very slow

Hi,
We are using BAPI to fetch data from R/3, at the time of displaying it on the screen, page load is taking time, and scrolling of page is also very slow.
Can you help me in improving the performance of the page.
Thanks in advance.

Hi
Firstly identify it is a issue with the BAPI side or not. Test the BAPI in R/3 side. If it takes too long, then tune the ABAP code. If it is fine, then try using cache settings at Iview level.
Regards,
Murali.

Data load taking very long time between cube to cube

Hi
In our system the data loading is taking very long time between cube to cube using DTP in BI7.0,
the maximum time consumption is happening at start of extraction step only, can anybody help in decreasing the start of extraction timing please
Thanks
Kiran

Kindly little bit Elaborate your issue, Like how is mapping between two cubes, Is it One to one mapping or any Routine is there in Transformation. Any Filter/ Routine in DTP. Also before loading data to Cube did you deleted Inedxes?
Regards,
Sushant

Data Base is very slow

Dear All,
Certain query on my database is very slow .
One of the query some times does not execute at all.this query involves a big table of about 5 million records.
Some Facts About my Database.
OS: SUN Solaris
DataBase: Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
RAM:32GB
Dedicated oracle server
Processors:16
DB Block Size:2048
Large pool:150994944
log_buffer:10485760
shared_pool_size:150994944
There are in total 21 production Database running on the same BOX.
Previously my buffer cache hit ratio was 27%.
So I recommended an increase in DB_CACHE_SIZE from 101MB to 300MB
and SGA_MAX_SIZE to 800MB from 600MB.
As a result ,The buffer cache hit ratio increased to 75%.
But still the queries run slow.
I even tried with Partitioning the Big Table Didn't help.
My question is ,is the system over loaded ?
or increasing the db_cache_size will help ?
Regards.

By itself the buffer hit cache ratio is a meaningless statistic. It can in fact be a misleading indicator since it does not actually reflect application performance.
Tune the query. Make sure it is running as well as it can.
Then look at overall machine resources: average and peak cpu, memory, and IO loads.
If spare resources exist then considering more resources to the more important databases on the system.
Document any performance changes that occur after each change. It is possible for the database performance problem being latching, that is, shared pool access and you might need space in the shared pool more than the buffers. It depends on the application and user load.
Why are you using a 2K database block size? I would think 4k or 8k would probably be better even for a true OLTP with almost all access by index.
To get help on the query you will need to post it, the explain plan, and information on available indexes, table row counts, and perhaps column statistics for the indexed columns and filter conditions.
HTH -- Mark D Powell --

Safari loads (freezes loading) webpages very slow on iPhone 4

Hi!
I have a problem with Safari on my iPhone 4 (4.2.1). Since I upgraded to 4.2.1 a week ago Safari is very slow and in 80% of time wont load webpages with first time when in 3G mode with strong bars. Well it loads them but very slowly (It takes approximately 20-30 seconds to load google or other pages). Maybe it would be more precisely to say that it starts to load, than the blue progress bar just stops at around 1/2cm and than after 20-30 seconds it actually starts to open the page and the blue progress bar continues to move. Sometimes (not often) after those 20-30 seconds I get message that page can't be opened cause server stopped to respond...
What is important to my mind is that if I press reload while Safari is loading a webpage it opens fast as it should. So it usually works with second try.
Since I noticed this problem after I upgraded to 4.2.1 I think those two things have connection (4.2.1 and Safari problem) but I might be wrong.
This is happening in different locations around the city and it is not problem with coverage...I have three, four or sometimes even 5 bars 3G.
Anybody having the same problem or can help me with some advice?
Thank you!

Safari Problems
Safari - Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
Safari 5.0.1 or later - Slow or partial webpage loading, or webpage cannot be found

Safari 8.0 loads pages very slow

Why does Safari 8.0 load webpages so slow now that I have installed OS X 10.10 - even the Apple.com page is painfully slow to load.

Please answer as many of the following questions as you can. You may already have answered some of them. In that case, there's no need to repeat the answers.
Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If not, do that now and see whether there's any change.
If your browser is Safari, then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Any change?
If you're running OS X 10.9 or later, select the Advanced tab in the Preferences window and uncheck the box marked
Stop plug-ins to save power
Any change?
Quit and relaunch the browser. Any change?
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Enable Private Browsing in the Safari menu. Any change?
Are any other web browsers installed, and are they the same? What about other Internet applications, such as iTunes and the App Store?
If other browsers and Internet applications are also affected, follow these instructions and test. Any change?
If Parental Controls is active for any user, please turn it off and test. Any change?
If only Safari is affected, launch the Activity Monitor application and enter "web" (without the quotes) in the search box. If a process named "Safari Web Content" is shown in red or is using more than about 5% of a CPU, select it and force it to quit by clicking the X or Quit Process button in the toolbar of the window. There may be more than one such process. Any improvement?
Open the iCloud preference pane and uncheck the box marked Photos, if it's checked. Any change?
Are there any other devices on the same network that can browse the Web, and are they affected?
If you can test Safari on another network, is it the same there?
If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference?

Flash player loading files very slow and getting stuck after 100%

Hello all,
I have an issue with my development and need your help and feedback for the same:
I have developed various E-Learning courses which was published some in Flash Player 9 and some with version 10. Since Flash Player 10.1 was introduced all my developed courses was running fine. But it's found that user who are using Flash Player 10.1.85.3 is facing issue with file loading and playing the courses. Some time Flash player fails to load the chapters and files after preloading 100%, and sometime it's very slow in loading performance. I like to intimate that all these was not happening with Flash player version 10. Please give me any idea where I am going wrong. Is this kind of issue possible? If anyone faced the same experience. Please give me your valuable feedback.
Please Note: I have faced an scenario that, suppose a user is stuck with loading the course, and after getting stuck he clear his browser cache, and immediately after that the same player start working fine. And loading the course chapter properly. Need help to get rid of this kind of situation.
Thank you
Amitava D

Hello all,
I have an issue with my development and need your help and feedback for the same:
I have developed various E-Learning courses which was published some in Flash Player 9 and some with version 10. Since Flash Player 10.1 was introduced all my developed courses was running fine. But it's found that user who are using Flash Player 10.1.85.3 is facing issue with file loading and playing the courses. Some time Flash player fails to load the chapters and files after preloading 100%, and sometime it's very slow in loading performance. I like to intimate that all these was not happening with Flash player version 10. Please give me any idea where I am going wrong. Is this kind of issue possible? If anyone faced the same experience. Please give me your valuable feedback.
Please Note: I have faced an scenario that, suppose a user is stuck with loading the course, and after getting stuck he clear his browser cache, and immediately after that the same player start working fine. And loading the course chapter properly. Need help to get rid of this kind of situation.
Thank you
Amitava D

Data load happening terribly slow

Hi all,
I had opened up quality server and made some change(removed its compunding attribute) at definition level to an infoobject present in the InfoCube.
The infoobject,IC and Update rules are all active.
when i scheduled the load now
ther is a huge variation in the data load speed.
Before:
3Hrs- 60 Lakhs
Now:
3hrs-10 Lakhs.
Also i m observing in SM66 that the process are all reading NRIV Table
Can anyone throw some insght to this scenario??
Any useful input will be rewarded!
Regards
Dhanya.

1. yes, select main memory. how many entries do you expect in this dimension?
In other terms, how many different combinations of characteristics calues included in your DIM are to be posted?
As I first guess, you should enter there 50'000 but please let me know the cardinality of this dimension.
2. the fact to have or not master data doesn't apply. Your fact table is booked with DIMIDs as keys of the table. Every time you book a record, the system will check in the dimension tables if this combination of characteristics values have already one record in their DIM, if yes, fine, nothing to do . If a new combination comes, the system will have to add a record in the dimension, thus it will first look for the next number range value (= DIMID).
In adition, the system will create master data IDs as well (even if there is no master data). In each Dimension table you'll find the corresponding master data SIDs for each of the IObjs belonging to the Dimension.
Tha's why filling empty cubes takes much more time than loading a cube with data already. That's also why the more you load data the less time it takes.
Please also make sure that all your F table indexes are dropped. (manage cube, performance tab, delete indexes prior loading).
this will help considerably initial loads...
Understanding these concepts of BW datawarehousing are of paramount importance in order to set the system up properly.
Message was edited by:
Olivier Cora

Slow video load. Very slow.

I've published my site, but the videos take entirely too long to load. It takes more than twenty minutes for a two minute video to play. There is only one video per page. I don't know if this can be fixed, but I desperately need for it to. With loading time this slow, the site is rendered useless. Thanks in advance for your help.
http://web.mac.com/kristy_faris

I use iSquint to compress the video. Have a look at this site to see my dv project that was 286mb original size, compressed down to 4.8mb. http://web.mac.com/lfairlie/iWeb/Site%204/Welcome.html
You can play with the size it compresses to quality wise as well.
Message was edited by: lynnie61

Data load is very slow

Similar Messages

Maybe you are looking for