Data Load: Replace with Rule

Hi guys,
this might be a simple question but need to find out quickly:
Can it load exports with a rule file even its not in column format??
Data source is an export and NOT in column format and need to load the data with a rule file to replace a member name. The new member names in the new outline has changed a little bit.
Old: Team_1
New: Team_01
Export is done by right click data base -> export.
Any idea?
Regards,
Bernd
Edited by: Bernd on Mar 15, 2012 4:13 PM

Data file in a free-form format doesn't need a rule file to import. Given your case my best guess is to just replace the names in the export file with the new names and jsut import it.

Similar Messages

Data load failing with a short-dump

Hello All,
There is a data load failing with the following short-dump:
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_FOEV_ERROR_IN_FUNCTION
Full text:
"UNCAUGHT_EXCEPTION" CX_FOEV_ERROR_IN_FUNCTIONC
"CL_RSAR_FUNCTION==============CP" or "CL_RSAR_FUNCTION==============CM004"
"DATE_WEEK"
It seems as if it is failing in a function module - please advise.
Regards,
Keith Kibuuka

Did you read OSS [Note 872193 - Error in the formula compiler|https://service.sap.com/sap/support/notes/872193] or OSS [Note 855424 - Runtime error UNCAUGHT_EXCEPTION during upload|https://service.sap.com/sap/support/notes/855424]
Regards

Data loading problem with Movement types

Hi Friends,
I extarcted data using the data source General Ledger : Line itemdata (0fi_gl_4) to BW side.
Problem is Movement Types for some documents missing.
But i checked in rsa3 that time showing correctly.
i restricted the data in bw side infopackage level only particular document that time data loading perfecly.
this data source having 53,460 records.among all the records 400 records doc type 'we' movement types are missing.
please give me solution for this how to loading the data with movement types.
i checked particular document of 50000313 in RSA3 it is showing movement types. then i loaded data in bw side that time that movement types are not comming to be side. then i gave the particular doc 50000313 in infopackage level loading the data that time movement types are loading correctly. this extaractor having 55000 records.
this is very urgent problem.Please give me reply urgenty. i am waiting for your's replys.
Thanks & Regards,
Guna.
Edited by: gunasekhar raya on May 8, 2008 9:40 AM

Hi,
we enhanced Mvement type field(MSEG-BWART) General ledger (0FI_GL_4) extractor.
this field populated with data all the ACC. Doc . number.
Only 50000295 to 50000615 in this range we are not getting the movement types values.
we didn't write any routines in transfer and update rules level.
just we mapped to BWART field 0MOVETYPE info object.
we restrict the particular doc no 50000313 infopackage level that time loading the the data into cube with movement types.
but we remove the restriction infopackage level then loading the data that time we missing the movement types data of particular doc no 50000295 to 50000615.
Please give mesolution for this. i need to solve this very urgently.
i am witing for your reply.
Thanks,
Guna.

Data Load file and Rule file Creation

Hi,
I have used to create Rule file and Data file for loading data into Essbase 7.1.6 version.
Past two years I didnt work in Essbase and forget the option, field properities, data load file creation.
Could you please advice me or any demo for creating rule file as well data files?.

Two things I could suggest.
1. look at the Sample.basic application it has dimension and data load rules for all sorts of scenarios
2. Come to my session at Kaleidoscope Rules files beginning to advanced where I go over some of the more interesting things with rules files

Data load along with analyzation

Hello,
We had a data inconsistency situation and ran RSRV tests. One of the tests is INITIAL KEY FIGURE UNITS IN FACT TABLES. This test gave a red light giving the message "RESULT OF CHECK FOR KEY FIGURE UNITS IN FACT TABLES OF INFO CUBE "ZXXXXX" ARE EMPTY.
The description is as follows:
Message no. RSRV117
Description:
In the fact tables (E and F tables) of an InfoCube, a search is being carried out for those records that contain values other than zero for key figures that have units, but for which the unit of the key figure is blank (has no value).
Since the value of the unit has to correspond to the value of the key figure, such records would indicate an error in the data upload. The values of the units have not been loaded correctly into BW.
Repairs
There are no automatic repair options. Reload the data.
SO do I need to load all my data once again. Is this error because the data coming from R/3 has no units? Do I need to correct anything in the infocube before loading data? Also can somebody give me a link or documentation for step by step procedure for extraction and loading from R/3 to infocube at the same time analyzing the data load at each step?
Thank you

Hi Visu,
As I understand what he meant is to check the fields in the Extractor that are populating the Currency Key fields that you specified in BW.
If you have a 1-1 mapping in your Transfer structure;
Run the Extractor in RSA3 on R/3 side for the records which have no units comming in.
And then in the output display make sure that those fields are being populated.
If you are using Transfer rules to pupulate those fields debug the transfer rules to find out why you are not getting the units populated correctly..
Let us know ..
Ashish.

Infocube data loads fail with UNCAUGHT_EXCEPTION dump after BI 7.01 upgrade

Hi folks,
We're in the middle of upgrading our BW landscape from 3.5 to to 7.01. The Support pack we have in the system is SAPKW70103.
Since the upgrade any of the data loads going to infocubes are failing with the following
ABAP dump UNCAUGHT_EXCEPTION
CX_RSR_COB_PRO_NOT_FOUND.
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_RSR_COB_PRO_NOT_FOUND', was not
     caught and
    therefore caused a runtime error.
    The reason for the exception is:
    0REQUEST is not a valid characteristic for InfoProvider
Has anyone come accross this issue and if so any resolutions you adopted to fix this. Appreciate any help in this regard.
Thanks
Mujeeb

hi experts,
i have exactly the same problem.
But I can`t find a test for infoobjects in rsrv. How can I repair the infoobject 0REQUEST`?
Thx for all answers!
kind regards
Edited by: Marian Bielefeld on Jul 7, 2009 8:04 AM
Edited by: Marian Bielefeld on Jul 7, 2009 8:04 AM

Data load failure with '#'

Hi Experts,
One of our data load is failing with special characteristic '#'.
The exact error records is as follows: 390-166333#New, SUB, Fan 80x80x80mm, 12
We have maintained '#' in RSKC, but still the load is failing.Any reason ?
After editing '#' in PSA and reload fixed the issue.
Can anyone suggest what should be done to fix this.
Thanks & Regards,
Naveen.

Hi,
try below field level routine.
DATA: l_d_length like sy-index.
DATA: l_d_offset LIKE sy-index.
DATA: CharAllowedUpper(60) TYPE C.
DATA: CharAllowedLower(60) TYPE C.
DATA: CharAllowedNumbr(60) TYPE C.
DATA: CharAllowedSondr(60) TYPE C.
DATA: CharAllowedAll(240) TYPE C.
CharAllowedUpper = 'ABCDEFGHIJKLMNOPQRSTUVWXYZÄÜÖ'.
CharAllowedLower = 'abcdefghijklmnopqrstuvwxyzäüöß'.
CharAllowedNumbr = '0123456789'.
CharAllowedSondr = '!"§$%&/()=?{[]}\u00B4`*+~;:_,.-><|@'''.
CONCATENATE CharAllowedUpper CharAllowedLower CharAllowedNumbr
CharAllowedSondr INTO CharAllowedAll.
RESULT = SOURCE_FIELDS-ENTITYNAME.
l_d_length = strlen( RESULT )
IF NOT RESULT CO CharAllowedAll.
DO l_d_length TIMES.
l_d_offset = sy-index - 1.
IF NOT RESULT+l_d_offset(1) CO CharAllowedAll.
RESULT+l_d_offset(1) = ''.
CONDENSE RESULT NO-GAPS.
ENDIF.
ENDDO.
endif.
CONDENSE RESULT NO-GAPS.
TRANSLATE RESULT TO UPPER CASE.
Thanks,
Phani.

Data load failure with datasource Infoset Query

Dear Experts,
I had a data load failure today,where i am getting data from the datasource which was built on Infoset Query.
we had a source system upgrade and when i checked Infoset query in the development of Source sytem im getting the below message :
"Differences in field EKES-XBLNR
Output Length in Dictionary : 035
Output Length in Infoset : 020
Message was saying Adjust the INFOSET,I dont have authorisation to create the transport in the source system.I requested the respective person to Adjust the Infoset and also to regenerate the same and move to production system.
I think this will solve my problem,Please correct me if am wrong.
Regards,
Sunil Kumar.B

Hi Suman,
i am still facing the problem even after adjusting the Infoset.The problem is we are facing the short dump with length mismatch.
when i checked the Infoset we are taking the field xblnr from table EKES and data element for teh field was XBLNR_LONG(char-35) but when i checked the datasource in RSA2 the dataelement for XBLNR was showing as BBXBL(char20).
i think this was causing the problem and i checked in SQ02 we will take the field directly from the table and how there is chance to change the dataelement.
Please help me to correct the same.
Regards,
Sunil Kumar.B

Data load issue with export data source - BW 3.5

Hi,
We are facing issues in loading data with the help of export data source.
We have created export data source of 0PCA_C01 cube. With the help of this export datasource, we are loading data to other custom cube. Scenario is working fine in development server.
But when we transported objects to quality server data is not getting loaded to custom target cube.
It is extracting zero records. All transports are ok and we have generated export datasource in quality before transports .Also regenerated export datasource after transport and activated infosource, update rule via RS* programs. Every object is active but data is not getting extracted.
RSA3 for 80PCA_C01 datasource isn't extracting any record in Quality. Records getting extracted in development. We are in BW 3.5 with patch level 19.
Please guide us to resolve the issue.
Thanks,
Aditya

Hi
Make sure that you have relevant Role & Authorization at Quality/PRS.
You have to Transport the Source Cube first and then Create a Generate Export Data Source in QAS. Then, replicate data sources for BW QAS Soruce System. Make sure this replicated Data Source in QAS. Only then can transport new update rules for second cube.
Hope it helps and clear

Data load problem with Sales Header and Item

Hi all,
The delta loads have failed, so I want to reload the delta again. I deleted the failed requests in data targets and then trying to reload the data. I am getting a message saying
Last delta update is not yet completed
Therefore, no new delta update is possible.You can start the request again if the last delta request is red or green in the monitor (QM activity)
Is it in RSA7, that I have to make the delta red? Please let me know where I have to do this. The data is going to an ODS object.
thanks
Sabrina.

Hi Sabrina,
Hope you have sorted it out by now, as there are other responses as well. Assuming that you now know the cause of failure.
For the below message "If you set a 'red' delta upload to green,with the next request, BW sends a delta request to the source system and this delivers the next delta data.
The data from the 'red' delta load is then no longer available (even with a repeat). This can lead to loss of data.Do you want to execute a QM Action?" -- Say OK and and set the QM status to red (status not ok) and when prompted for activation of M records, say "no" (as indicated in my previous post).
However, to be able to load this request from PSA you need to have this request in PSA (depending on the processing options), so goto RSA1> Modeling> PSA--> find your request under the relevant application component, and right click -->start the update immediately.
Hope it helps,
Sree

Sql loader - Data loading issue with no fixed record length

Hi All,
I am trying to load the following data through sql loader. However the records # 1, 3 & 4 are only loading succesfully into the table and rest of the records showing as BAD. What is missing in my syntax?
.ctl file:
LOAD DATA
INFILE 'C:\data.txt'
BADFILE 'c:\data.BAD'
DISCARDFILE 'c:\data.DSC' DISCARDMAX 50000
INTO TABLE icap_gcims
TRAILING NULLCOLS
     CUST_NBR_MAIN          POSITION(1:9) CHAR NULLIF (CUST_NBR_MAIN=BLANKS),
     CONTACT_TYPE          POSITION(10:11) CHAR NULLIF (CONTACT_TYPE=BLANKS),
     INQUIRY_TYPE          POSITION(12:13) CHAR NULLIF (INQUIRY_TYPE=BLANKS),
     INQUIRY_MODEL          POSITION(14:20) CHAR NULLIF (INQUIRY_MODEL=BLANKS),
     INQUIRY_COMMENTS     POSITION(21:60) CHAR NULLIF (INQUIRY_COMMENTS=BLANKS),
     OTHER_COLOUR POSITION(61:75) CHAR NULLIF (OTHER_COLOUR=BLANKS),
     OTHER_MAKE          POSITION(76:89) CHAR NULLIF (OTHER_MAKE=BLANKS),
     OTHER_MODEL_DESCRIPTION POSITION(90:109) CHAR NULLIF (OTHER_MODEL_DESCRIPTION=BLANKS),
     OTHER_MODEL_YEAR POSITION(110:111) CHAR NULLIF (OTHER_MODEL_YEAR=BLANKS)
data.txt file:
000000831KHAN
000000900UHFA WANTS NEW WARRANTY ID 000001017OHAL
000001110KHAP
000001812NHDE231291COST OF SERVICE INSPECTIONS TOO HIGH MAXIMA 92 MK
000002015TPFA910115CUST UPSET WITH AIRPORT DLR. $200 FOR PLUGS,OIL,FILTER CHANGE. FW
Thanks,

Hi,
Better if you have given the table structure, I check your script it was fine
11:39:01 pavan_Real>create table test1(
11:39:02   2 CUST_NBR_MAIN varchar2(50),
11:39:02   3 CONTACT_TYPE varchar2(50),
11:39:02   4 INQUIRY_TYPE varchar2(50),
11:39:02   5 INQUIRY_MODEL varchar2(50),
11:39:02   6 INQUIRY_COMMENTS varchar2(50),
11:39:02   7 OTHER_COLOUR varchar2(50),
11:39:02   8 OTHER_MAKE varchar2(50),
11:39:02   9 OTHER_MODEL_DESCRIPTION varchar2(50),
11:39:02 10 OTHER_MODEL_YEAR varchar2(50)
11:39:02 11 );
Table created.
11:39:13 pavan_Real>select * from test1;
no rows selected
C:\Documents and Settings\ivy3905>sqlldr ara/ara@pavan_real
control = C:\control.ctl
SQL*Loader: Release 9.2.0.1.0 - Production on Sat Sep 12 11:41:27 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Commit point reached - logical record count 5
11:42:20 pavan_Real>select count(*) from test1;
COUNT(*)
         5    control.ctl
LOAD DATA
INFILE 'C:\data.txt'
BADFILE 'c:\data.BAD'
DISCARDFILE 'c:\data.DSC' DISCARDMAX 50000
INTO TABLE test1
TRAILING NULLCOLS
CUST_NBR_MAIN POSITION(1:9) CHAR NULLIF (CUST_NBR_MAIN=BLANKS),
CONTACT_TYPE POSITION(10:11) CHAR NULLIF (CONTACT_TYPE=BLANKS),
INQUIRY_TYPE POSITION(12:13) CHAR NULLIF (INQUIRY_TYPE=BLANKS),
INQUIRY_MODEL POSITION(14:20) CHAR NULLIF (INQUIRY_MODEL=BLANKS),
INQUIRY_COMMENTS POSITION(21:60) CHAR NULLIF (INQUIRY_COMMENTS=BLANKS),
OTHER_COLOUR POSITION(61:75) CHAR NULLIF (OTHER_COLOUR=BLANKS),
OTHER_MAKE POSITION(76:89) CHAR NULLIF (OTHER_MAKE=BLANKS),
OTHER_MODEL_DESCRIPTION POSITION(90:109) CHAR NULLIF (OTHER_MODEL_DESCRIPTION=BLANKS),
OTHER_MODEL_YEAR POSITION(110:111) CHAR NULLIF (OTHER_MODEL_YEAR=BLANKS)
data.txt
000000831KHAN
000000900UHFA WANTS NEW WARRANTY ID 000001017OHAL
000001110KHAP
000001812NHDE231291COST OF SERVICE INSPECTIONS TOO HIGH MAXIMA 92 MK
000002015TPFA910115CUST UPSET WITH AIRPORT DLR. $200 FOR PLUGS,OIL,FILTER CHANGE. FW
CUST_NBR_MAIN     CONTACT_TYPE     INQUIRY_TYPE     INQUIRY_MODEL     INQUIRY_COMMENTS     OTHER_COLOUR     OTHER_MAKE     OTHER_MODEL_DESCRIPTION     OTHER_MODEL_YEAR
000000831     KH     AN     NULL     NULL     NULL     NULL     NULL     NULL
000000900     UH     FA      WANTS     NEW WARRANTY ID 000001017OHAL     NULL     NULL     NULL     NULL
000001110     KH     AP     NULL     NULL     NULL     NULL     NULL     NULL
000001812     NH     DE     231291C     OST OF SERVICE INSPECTIONS TOO HIGH MAXI     MA 92 MK     NULL     NULL     NULL
000002015     TP     FA     910115C     UST UPSET WITH AIRPORT DLR. $200 FOR PLU     GS,OIL,FILTER C     HANGE. FW     NULL     NULL- Pavan Kumar N
Edited by: Pavan Kumar on Sep 12, 2009 11:46 AM

HFM data load "replace by security"

Version 2.2 -> What is wrong - even for admin user every second load clears data and every second load imports

Hi,
Replace by security option is applicable to accounts only.
For C3 dimension, different users need to have access to different C3 members. First of all please check in the HFM app settings, the parameter "UseSecurityForCustom" is selected or not. This parameter is used if we need to apply security on custom dimensions.Also verify the parameter "SecurityClass" which will be used to identify the users who can access the custom dimension data.
Thanks..

Flat file data load failed with the below error

hi guys,
when the scheduling load(info package) from the flat file ,got below error..
Error 'The argument 'INR' cannot be interpreted as a number ' on assignment field /BI
thanks

Hi,
It seems that the flat file and data source are not in sync.... check your flat file format and prepare it in sync with your data source.
I guess you have an amount field followed by currency in your flat file, but in your data source currency field is not next to the amount KF or vice versa. It could also be that the KF you have defined is not of Amount type, and hence it doesn't expect the currency field.
Hope this helps
Godhuli

Master data load issue with flexible data source

Hi All,
1CL_OLIS001have this data source for loading configuration data. the changed records are not updating into this DS regularly.
I have delta load on this every day. It loads correct data for one month and suddently it will start loading 0 records every day with out failing. If I reset the delta, it will work fine for month or two and then will corrupt again.
Is any one have this kind of issue before Please suggest to resolve this issue permanently?
Thanks and Regards,
Pooja

Hi Pooja,
1) It might be Database table space issue in the backround, Please checkit out with BASIS
Regards,
Marasa.

Help needed please -Master data loading- error with text loading.

Hi,
Iam S.Sushma. Iam getting error while loading master data from flat file- attributes and texts.
I have loaded attribute data successfully. But when iam monitoring the text data then iam getting following error.
""SET THE LANGUAGE FIELD IN THE SOURCE SYSTEM-LONG TEXT.""
""RECORD1: SRPID_1:DATA RECORD 1(EN S):DUPLICATE DATA RECORD.
"ERROR 4 IN UPDATE"
I took 2flat files for attributes and texts.
SRPID is key field.(sales representative id)
attributes:- SRPID, NAME1, AGE1, ADD1,PHONE1.
text:- SRPID,LANG,SHTXT,MDTXT,LGTXT.
Iam just a begginer so need your guidence. Thank you in advance.
Message was edited by: sushma sandepogu
Message was edited by: sushma sandepogu

Hi Eugene,
Thank you for your guidence. I have changed the order in flat file and got the results successfully. But when iam viewing the Master data text the S10 in coming in 2nd position in maintain master data-list screen i mean :-
SRPID LANG NAME AGE ADD PHONE SHTXT MDTXT LGTXT
S1 EN ABC 34 GDS 1234 AS ASD ASDDF
S10
S2
S3
S9.
Iam not understading why. Hope yu can help me. I have assigned full points to you for your previous solution.
Thank you in advance.
S.Sushma.

Data Load: Replace with Rule

Similar Messages

Maybe you are looking for