Data load status stay in yellow

Hi,
My BW platform is BW 701 with SP 5. I am loading ECCS data hourly with 3.5 method which include transfer rule and update rule. Most of the time the data load are successfully completed. The total number of records is about 180,000 records and extracted in 4 packets. Once in a while, randomly one of the data packet stay in yellow could not complete the load. But, in the next hour data load, the data loaded successfully. We know it is not data issue. Does anyone know why the data load is not consistently? Any suggestions are much appreciated.
Thanks for your suggestions,
Frank

HI Frank,
This might be because some of the TRFc or Idcos might got hung.
Check the source system job got finished or not.
If the source system job got completed check the TRFCs and IDOCs if there are any hung TRFCs and IDOCs.
in the monitor screen --> menu bar environment > select job overview> source system (enter id n pwd ) check the job status.
once its done to check the TRFCs
Info package>Monitor->Environment> Trasact Rfcs-->In source system --> it will diplsay all the TRFCs check for your hung TRFCs and try to manually flush the TRFC(F6).
If idocs are hung change - process the IDOCs manually.
Regards
KP

Similar Messages

BI accelerator: problem displaying Data Load Status

I have installed BI accelarator following the note : 934848.
The problem is when I try to monitor Data Load Status , I've this error on the portal : "Error reading the data of InfoProvider 0TCT_VC12, There is still no data source assigned to VirtualProvider 0TCT_VC12" but I've activated direct access for this virtual info prorvide to the correct source system as it is mentionned(step 5) and it is assigned to a data source (0TCT_DS12).
any help would be grateful,rewarded
thomas
Message was edited by:
Thomas Bailleul

You're absolutely right Rajani , it's about BI Cokpit Administration.
In fact, I really activate direct access, I added the right source system in the Source System for InfoSource 3x window.
but it 's still not working. Thanks for your Hekp.

Data loading status

Hi,
In my BI environment, i've various infoproviders being loaded with their respecitve loading frequency. Periodically i need to know what all infoproviders have request with failed status.
Is there any source (any ods/cube) which lists such infoproviders having failed requests. which i could use in my report program.
Regards,
Nagendra.

Hi Nagendra,
I'm not familiar with any InfoProvider that meets your requirements. However, you can construct one if you'd like. There are 2 database tables that come in handy for looking at data load requests.
Half of the data you are looking for is in the table RSREQDONE. This table details information about requests. There are 2 status fields (one for request status, one for QM).
The other half is in table RSREQICODS. This table relates the request id to the load target.
If you create a view joining the 2 tables on the request ID, you can get a consolidated view telling you requests, InfoProviders, and status. If you want more tha this, you could then try making a custom datasource in RSO2 and creating an ODS Object or InfoCube plus reports.
Regards,
Adam

Data Load status

Due to certain requirements, I am triggering an infopackage through an ABAP Process Type using the function module BAPI_IPAK_START in a process chain.
I want the next process type of process chain to be executed after the data load triggered in the ABAP process type is complete.
How can I find out the status of the data load and put a hold?
Thanks.
Regards
Venkatesh Iyengar

Thanks for the reply.
Within the ABAP process type, i want the process type to pause till the loading is done.
I am not referring to manual checking here.
Is there any table which stores the data regarding the status of the load?
Regards,
Venkatesh iyengar

Data load status problem

Hi guys,
In the details tab for a request, I have status as red for signal starting from data package 9 to 32. When I checked the PSA for each data package, I didnt find a single record with red status.
For Data Package 9 and onwards, I get following details:
Update PSA: No erros
Transfer Rules: No errors
Update Rules: No errors
Update: No errors
Processing End: Errors occured
Processing 2 finished
Error 4 in the update
I am loading master data with full update for customer.
Can somebody tell me why its happening and how to fix it.

hi,
can you see any detail message in monitoring ?
invalid character etc ?
since it's master data, perhaps duplicate data ?
try to set in infopackage 'ignore duplicate ...' option ?
hope this helps.

Data load status on the Query

Hello,
What are the ways can we do this ....
When a BW user logs on to execute a query via Analyzer, Query Designer or on the Web. The BW User should be notified at the point of executing the query in some manner if there is any problems with the loading of the cube, masterdata, or any other info objects pertaining to the query.
In other words, the user is to be informed if the data is not valid at the point of running the query.

Please check my reply to your other message in "BI Suite Business Explorer" forum.
Also, In future please try to post it in one forum. Most of the people view all the forum's post using SAP Business Intelligence view.

R3 Table Required for data load status

Hi all,
I am in 3.x version so rsstatmanpart(fast table only available in bi7) wont work.
I want the no of records added and transferred for a specific cube on a specific date.
Thanks in advance.

Check Tables RSMONICTAB, RSMONFACT, RSMONICDP
Hope this helps..
/pradeep

Data Load Check Status

Hello Guru's,
I am wroking on BI 3.5. i want check data load status in infocube and ODS, where i should check data load failure and
success in details,
Data is uploaded by data requests and i want check which requested is failed.
Please help me how to create master data sources in r/3
Regards
Shivaraj
Edited by: Shvai Patil on Feb 1, 2008 4:45 AM

Hi,
You can monitor all the requests in RSMO and also check in sm37.
For creating custom master data in R/3 you can use RSO2 tcode.
Hope it helps you.
Let us know if still have any issues.
Reg
Pra

Job completed but status showing still yellow

Hi Experts,
One of full load status tab showing yellow, but the job completed when i checked in SM37.
I am loading from ODS to Cube there is no PSA. we are using 3.5 version.

Hi David,
Check the load in the details tab weather all the data packets are in green status.If at all the idocs are hung or TRFCs are hung you may face this issue. try to manually flush the hung Idocs and TRFCs.
If everything is fine wait for the PID process to finish- some times it happen the PID might be running at the background.
If everything is fine n the status of the request is yellow -try to change the status of the load to green.
Regards
KP
Edited by: prashanthk on Oct 5, 2010 2:22 PM

Data load failed at infocube level

Dear Experts,
I hve data loads from the ECC source system for datasource 2LIS_11_VAITM to 3 different datatargets in BI system. the data load is successful until PSA when comes to load to datatargets the load is successful to 2 datatargets and failed at one data target i.e. infocube. I got the following error message:
Error 18 in the update
Diagnosis
    The update delivered the error code 18 .
Procedure
    You can find further information on this error in the error message of
    the update.
Here I tried to activate update rules once again by excuting the program and tried to reload using reconstruction fecility but I get the same error message.
Kindly, please help me to analyze the issue.
Thanks&Regards,
Mannu

Hi,
Here I tried to trigger repeat delta in the impression that the error will not repeat but then I encountered the issues like
1. the data load status in RSMO is red but where as in the data target the status is showing green
2. when i try to analyze psa from rsmo Tcode PSA is giving me dump with the following.
Following analysis is from Tcode ST22
Runtime Errors         GETWA_NOT_ASSIGNED
Short text
     Field symbol has not yet been assigned.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLSLVC" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
    You attempted to access an unassigned field symbol
    (data segment 32821).
    This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
    - You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "GETWA_NOT_ASSIGNED" " "
    "SAPLSLVC" or "LSLVCF36"
    "FILL_DATA_TABLE"
Here I have activated the include LSLVCF36
reactivated the transfer rules and update rules and retriggered the data load
But still I am getting the same error...
Could any one please help me to resolve this issue....
Thanks a lot,
Mannu
Thanks & Regards,
Mannu

Request Status stays yellow after successful load

We recently started loading two infocubes from the same data source.
- The Monitor shows that the load completed normally with no errors.
- Manage on the first cube shows that the status is green and the data available for reporting.
- Manage on the second cube shows the data is not avaialble and the status is yellow.
There seems to be no problems with the load. I can manualy force the status from yellow to green and the data is available for reporting. But I don't want to have to manully change the status after each load. Any ideas on why the status stays yellow? Any thoughts on what I can do?
Thanks,
Chris

Nagesh,
Looks like your suggestion will solve this. It was not checked for the one that was staying yellow. It was checked for the cube that would go to green. I'll run a test then come back and award points.
Thanks,
Chris

Status remains as Yellow, for no data

hi ,
in our master data load process chain, a datasource which has 0 records in the sourcesystem returns 0 records in BI. but the status remains as yellow , instead of green.
since the status is yellow the next process is not getting triggered. only if we manually change the status to green, the process chain continues. wht shall we do to change the status to green automatically.

Hi DOLLY,
you need to cofigure a small setting at Infopackage for this.
RSA1-> infopackage -> scheduler -> Trafic light color for Empty request -> select green and save it.
for 0 to 0 records load will show as Green.
Regards
Daya Sagar

Error 8 when starting the extracting the program-data load error:status 51

Dear all,
I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
bi data upload error:status 51 - error: Error 8 when starting the extracting the program 
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
 IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
 Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
 r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
 IDoc sent to SAP system or external program"
 bw side: "IDoc: 0000000000007089 Status: Application document posted,
 IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
 check connection is ok, tried to restore the setting for bw-r3 connection though same problem
 Have checked partner profile.
what's wrong with the process? 
Best regards,
dushyant.

Hi,
 Refer note 140147.
Regards,
Meiy

How to identify the status of the data load

Hi All,
Here is my requiremenet,
I have a process called etl_pf2 which loads the data into staging tables. Now I have another process that does a partition exchange and moves the data from staging tables to online tables.
In one procedure, I need to verify whether any data load into the staging tables is happings. If yes then partiontion should not occur, if no then movement should happen.
Any idea on any parameter which can be used in the procedure to check the status of the data load in staging tables.
Please help me.

Thanx for reply
But i thhink that the problem is with NQSServer which crashes but not disappears from the processes list.
I tried to search obiee+USER_MEM_ARGS and nqsserver+USER_MEM_ARGS but found only this thread.
How can JVM settings help to nqsserver.exe to work properly?

Data load problem - BW and Source System on the same AS

Hi experts,
Im starting with BW (7.0) in a sandbox environment where BW and the source system are installed on the same server (same AS). The source system is the SRM (Supplier Relationship Management) 5.0.
BW is working on client 001 while SRM is on client 100 and I want to load data from the SRM into BW.
Ive configured the RFC connections and the BWREMOTE users with their corresponding profiles in both clients, added a SAP source system (named SRMCLNT100), installed SRM Business Content, replicated the data sources from this source system and everything worked fine.
Now I want to load data from SRM (client 100) into BW (client 001) using standard data sources and extractors. To do this, Ive created an InfoPackage in one standard metadata data source (with data, checked through RSA3 on client 100 source system). Ive started the data load process, but the monitor says that no Idocs arrived from the source system and keeps the status yellow forever.
Additional information:
BW Monitor Status:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System Response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
BW Monitor Details:
0 from 0 records
but there are 2 records on RSA3 for this data source
Overall status: Missing messages or warnings
- Requests (messages): Everything OK
o Data request arranged
o Confirmed with: OK
- Extraction (messages): Missing messages
o Missing message: Request received
o Missing message: Number of sent records
o Missing message: Selection completed
- Transfer (IDocs and TRFC): Missing messages or warnings
o Request IDoc: sent, not arrived ; Data passed to port OK
- Processing (data packet): No data
Transactional RFC (sm58):
Function Module: IDOC_INBOUND_ASYNCHRONOUS
Target System: SRMCLNT100
Date Time: 08.03.2006 14:55:56
Status text: No service for system SAPSRM, client 001 in Integration Directory
Transaction ID: C8C415C718DC440F1AAC064E
Host: srm
Program: SAPMSSY1
Client: 001
Rpts: 0000
System Log (sm21):
14:55:56 DIA 000 100 BWREMOTE D0 1 Transaction Canceled IDOC_ADAPTER 601 ( SAPSRM 001 )
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a termination message from the application (MESSAGE Axxx) or by an error detected by the SAP System due to which it makes no sense to proceed with the transaction. The actual reason for the termination is indicated by the T100 message and the parameters.
Additional documentation for message IDOC_ADAPTER 601 No service for system &1, client &2 in Integration Directory No documentation exists for message ID601
RFC Destinations (sm59):
Both RFC destinations look fine, with connection and authorization tests successful.
RFC Users (su01):
BW: BWREMOTE with profile S_BI-WHM_RFC (plus SAP_ALL and SAP_NEW temporarily)
Source System: BWREMOTE with profile S_BI-WX_RFCA (plus SAP_ALL and SAP_NEW temporarily)
Someone could help ?
Thanks,
Guilherme

Guilherme
I didn't see any reason why it's not bringing. Are you doing full extraction or Delta. If delta extraction please check the extractor is delta enabled or not. Some times this may cause problems.
Also check this weblog on data Load errors basic checks. it may help
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Thanks
Sat

Data load status stay in yellow

Similar Messages

Maybe you are looking for