Data load stuck from DSO to Master data Infoobject

Hello Experts,
We have this issue where data load is stuck between a DSO and master data infoobject
Data uploads from DSO( std) to master data infoobject.
This Infoobject has display and nav attributes in it which are mapped from DSO to Infoobject.
Now we have added a new infoobject as attribute to the master data infoobject and made it as NAV attri.
Now when we are doing full load via DTP the load is stuck and is not processing.
Earlier it took only 5 mns of time to complete the full load.
Please advise what could be the reason and cause behind this.
Regards,
santhosh.

Hello guys,
Thanks for the quick response.
But its nothing proceeding further.
The request is still running.
earlier this same data is loaded in 5 mns.
Please find the screen shot.
master data for the infoobjects are loaded as well.
I can see in SM50 the process at P table of the infoobject the process is.
Please advise.
Please find the detials
Updating attributes for InfoObject YCVGUID
Start of Master Data Update
Check Duplicate Key Values
Check Data Values
Process time dependent attributes- green.
No Message: Process Time-Dependent Attributes- yellow
No Message: Generates Navigation Data- yellow
No Message: Update Master Data Attributes - yellow
No Message: End of Master Data Update - yellow
and nothing is going further in Sm37
Thanks,
Santhosh.

Similar Messages

Data load error during updation of master data

Dear all,
While updating the master data from the PSA , the following error is appearing and the load fails.
"The time interval ['20050313'/'20050313'] & (from/to) for the data
records 1 & and 2 & overlaps in characteristic 0EQUIPMENT &."
What could be the reason for this error and how to correct the same.
I am able to understand that the valid from and the valid to date are same. in R/3 whenever a change record is created for the equipment the valid from and the valid to date will be the same as shown below.
Creation of record (for example today) valid from :- 02.06.2008 and valid to 31.12.9999.
Change of record (for example tommorrow) Valid from :- 03.06.2008 and valid to 31.12.9999
In the above case the valid to date of the creation data will automatically change from 31.12.9999 to 03.06.2008.
How could this be solved.
Regards,
M.M

Hi Magesh,
Please look at /BIC/*Equipment table in SE16.
Find the record with a key = ********* and notice what values have Date_from and Date_to fields. The interval they determine, overlap with ur date_to and date_from.
You need to supply correct date_to & date_from values.
thanks
Assign points if this helps
Note: this is a common scenario in time dependendent master data.....it happens because you have two records for the same values of master data and also they have overlapping time interval.....you cannot have two values of master data at the same time.

The error about loading data from ODS to master data.

hi,experts,when I load the data from ODS to master data,there is an error messege:
" InfoSource 8ZPA_0022 is not defined in the source system.
     Message no. R3005
Diagnosis
     The InfoSource 8ZPA_0022 specified in the data request, is not defined
     in the source system.
System response
     The data transfer is terminated.
Procedure
     In the Administrator Workbench of the Business Information Warehouse,
     update the metadata for this source system, and delete the InfoPackages
     belonging to InfoSources that no longer existing ."
But,the InfoSource 8ZPA_0022 is not problem,how can I do？thanks.

Hi,
as suggested by the message, did you update the meta data by doing a replication of datasources for the source system 'myself'? If not, do so and reactivate the communication structure. Then reload.
regards
Siggi

Derivation of Cost Center from WBS element MAster data at the time of invc.

dear all,
during invoice postings with wbs element account assignment system do not derive assigned cost center from wbs element master data.
how can the system derive the cost center automatically??
Is there any BADI available to this issue.
regards
saqib

Dear,
WBS is Real and cost center in the master data is for statistical postings i.e. responsible cost center in WBS.
How to make substitution (OKC9) deriving the cost center in document line items / invoice posting etc.
Kindly give detail process for its configuration steps and is there any BADI available which can be useful in this regards?
Regards,
Saqib Usman

How to avoid the House Bank when creating a vendor from the HR master data?

Hi all,
I am using T-code PRAA in order to generate the vendors from the HR master data.
It works fine, but the programs tries to record a House Bank in the company code view of the vendor.
Which I don't want.
Does anyone know how to get rid of the house bank ?
I already tried, by deleting the entry in the characteristic TRVHB, through PE03, but then, the file is not generated successfully.

Hi Madhuri,
Best way to avoid such problem is to use TAB delimited file instead of comma separated data. Generally TAB does not appear in data.
If you are generating the file, use tab instead of comma.
If you cannot modify the format of file and data length in file is fixed character, you will need to define the structure and then move data in fixed length structure.
Regards,
Mohaiyuddin

Data not uploading in Time dependent Master data Infoobject

Hello All,
I have a master data infoobject for HR entity and have to load data from PSA to that info object.
The HR entity infoobject already have sone data like below:
HR Entity
Version
Date from
Date To
x
A
01.07.2013
31.12.9999
x
A
19.04.2013
30.06.2013
x
A
01.09.2012
18.04.2013
x
A
01.01.2012
31.08.2012
x
A
01.01.1000
31.12.2011
Now the data in PSA is as follows:
HR Entity
Start Date
End Date
X
01.01.2012
18.12.2013
Once I loaded this data to the infoobject, i can not see this value which is the latest value of this HR entity.
Can somebody please explain how the data gets loaded in the time dependent master data infoobject and why this entry is not getting loaded in the info object.
Regards
RK

Hi,
did you activate master data after your load?
You can check also version 'M' records and see if your record is there.
The load went green?
The problem is, that your entry overlaps all exisitng time intervals, which can't be deleted or merged as there may be dependent transactional data. You have first to delete the transactional data for this entity.
Then you can delete the time-dependent data and reoload it from your PSA.
BW will build then correct time intervals.
The easiest is to change the time interval in PSA, see example below:
At the moment the time interval is not accepted. But you can add time intervalls before 31.12.2011 and after 01.07.2013, Then system will create remaiing time intervals, e.g. your new record is:
HR Entity
Start Date
End Date
X
01.08.2013
18.12.2013
Result will be:
HR Entity
Version
Date from
Date To
x
A
19.12.2013
31.12.9999
x
A
01.08.2013
18.12.2013
x
A
01.07.2013
31.07.2013
Regards, Jürgen

How can data in cube will update after Master data changes

Hi,
We have a Revenue cube which we are loading actuals after every month.
Now we have master data changes at profit center level. Profit center is moving from Holdings to Power, effective with October reporting. So master data we updated accordinglt now we need to update data in cube.
I want know how can we update all the data in cube without dropping and relaoding again.
We have DS0s first then cube.
Please let me know available options.
Thanks
Sivaprasad

Hi,
Make the field which stores data whether it is holding or power as navigational attribute of profit centre.
So whenever master data changes just update profit center master data . Use this nav attribute in reports.
So whenever master data changes report changes automatically.
If you want time dependant 2008 to 2009 Holdings then 2007 power enable profit center time dependant master data.
Hope it helps.
Thanks,
Arun

Who worked with ICS' Model 4896 GPIB? I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

Hello. Most of the engineers in developer exchange are more familiar
with NI products. Contacting ICS for technical support is a better
course of action.

Master data load prob from flat file

hi to all .........
here i have some q which are very basic.
1) i have defined a char "purchase order date" and i have defined the data type as "DATS " . now i am trying to load master data to this. so i went to the infoprovider's infoarea and right clicked and choose "Insert characteristics as infoprovider" it says " it is not base char so it cant b a data target. then h to load data master data to this.
2) while define the DSO where should i place the characteristic in key fields or in the data fileds , where should i put the key figures, since its dso i should include record mode na , where should i insert it.
thank u in advance

HI,
1) i have defined a char "purchase order date" and i have defined the data type as "DATS " . now i am trying to load master data to this. so i went to the infoprovider's infoarea and right clicked and choose "Insert characteristics as infoprovider" it says " it is not base char so it cant b a data target. then h to load data master data to this.
Character stics we can convert as infoprovider which are independent, Date field is time characterstic it is not independent it is depnds on some charasterstic(like based on customer, material,plant these type of objects u can conevert as info provider)
in your case u want to load data to DSO
2) while define the DSO where should i place the characteristic in key fields or in the data fileds , where should i put the key figures, since its dso i should include record mode na , where should i insert it.
Never keep the keyfigurs in key fields column.
remaining characterstics (all even date characterstics aslo) u can keep in keyfields
in keeping key fileds u should analuse on which basis combination the records should be over written based on that u can decide
eg: matreial no , customer number is unique then u can keep those in key fields
even date also unique (means on same date same material , same customer not there) then u can keep date also in Key fields,
Thansk &Regards,
sathish

Loading from ODS to Master data Object

Hi Friends ,
Please let me know how to load from ODS to a master data object.
Thanks,
krishna

Hi Krishna,
If your master data is enabled as "Infoprovider" then you can use an export datasource on the ODS and load the data into your master data.
I am not sure if it will work if the master data info-object is not enabled as "Infoprovider".
The other mechanism would be to use an infospoke to download the ODS data into a flatfile. And then use the flatfile to upload the master data.
Hope this helps.
Bye
Dinesh

Info object maintain directly in DSO without Master data .

Hello all,
DSO Activation failing due to invalid characters hence not able to generate SID's during activation .
Note : Special characters should be allowed .
I checked info object settings i.e " Lower case letters is not checked " .
At present no program available to handle these special characters.
No Master data maintainence is possible.
Now please please suggest how to handle these special characters in DSO's .
we are using 7.3 .
Thanks,
Surla

Are you able to reproduce the problem in DEV or QA system?
Transaction RSKC. Copy the contents of the permitted character list into a file and preserve the file for possible future use. Type ALL_CAPITAL in the field (and nothing else.) Try loading and activating the data and see if the problem is resolved. If the problem doesn't go away, restore RSKC content from file and pursue other solutions. If it does go away, discuss with your team and implement ALL_CAPITAL throughout the landscape permanently. Read the below SAP Notes for explanations.
173241 - Allowed characters in the BW System
1075403 - Unallowed characters and ALL_CAPITAL

Data Extraction failure from DSO to Cube

Hello Experts,
The Data load to Cube( zfiar_c03) from DSO (zfiar_03) using a full
update is failing throwing the error message"Incomplete update due to
errors in single records ".We had deleted the failed request from
infocube and loaded the the same req from psa by correcting or removing
the # values but it failed again resulting in the same error.
When we checked the previous successful requests which got loaded to
cube from dso it also contains the # values , but the loading was
successful.
our BW reporting is seriously impacted due to the failure coz our
collection,recievables..etc all business critical report is based on
this cube.
Request you all to help..
thanks,
Sapta

Hi Sapta Jyothi,
I am not sure what the actual problem is. But, from my prior experience, I fell this is related to the Process chain configuration provided you are using process chains.
If you are using a process chain , please check if there is any other failed step in the Process chain. If that is the case, even if the failure due to invalid entries is fixed the QM status of the load to the cube will not turn Green till the process chain status turns green or yellow. You can check from the details tab of the info-package load run and see if the process chain log step is red. If this is the case, then you will have to take action to see that other steps are completed succesfully. And also the Process chain in this case needs to be modelled in a way, such that, when a load to a cube fails the successive steps like creation of cube indeces should not be triggered.
Thanks ,
Nithin.

Deleting the request from DTP of master data.

Hi,
I loaded data i attributes of 0costcenter. But the request was showing me yellow color. Its not been deleted. I deleted it from RSICCONT. But still while running DTP its showing me error as " Request 7.928 is already being processed".
Please tell me some solution as i cant delete the DTP.
Roma

hi
check the links
http://wiki.sdn.sap.com/wiki/display/BI/ChangeStatusofDTPRequest
Unable to delete request from DSO
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?QuickLink=index&overridelayout=true
may help you

Master data loads Request not updated to any data target using delta

When checking the PSA the request updated ICON has red triangle and the mouse over says
"Request not updated to any data target using delta".
I am doing full loads for text data and both full and delta's loads for Attributes. This is BI 7.0 system but the loads are still from 3.1. DTP has not been implemented yet. The system was just upgraded in July. I am unable to schedule deletes from the PSA for successful loads. However, I think the data is updating to the info objects. My Info package has the selection to PSA then in the InfoObject package by package.
How do I schedule the deletes from PSA and why does the Request updated show red but the monitor for the info package show green?
Edited by: Joe Mallorey on Jan 27, 2009 5:46 PM

Hi shikha,
The load has not failed but I am unable to delete the load from the PSA.
If you do a manage on the Data Source or go to PSA from RSA1 the first column has the green gear icon instead of a green check mark I have red triangle the mouse over says "request not updated to any data target using delta" The data has loaded to info object. I am trying to schedule deletes from the PSA and using the option to "delete only successfully booked/updated requests" So how do I get the request updated column to show a green check mark so my deletes will Process? This is for master data only. My transactions load fine and delete properly according to my settings.
Thanks for the reply.
Regards,
JoeM

Delta loads - for DB Connect and master data.

Hi there,
Would appreciate if any one clarify me on:
1) Are delta loads are possible as far as Master data is concerned?
2) What are all types of data loads (Initial/ delta/ Full)are possible as far extracting data from DB connect is concerned?
Thanks in anticipation.
Rgds,
A.
Message was edited by: Ash

Hi Ash,
As far as I know, with DB connect you have the only option to have delta functionality - to use ODSs. Make full load from the source system to ODSs. Then update data targets from ODSs. During this update you'll have an option for init/full/delta load.
Best regards,
Eugene

Data load stuck from DSO to Master data Infoobject

Similar Messages

Maybe you are looking for