Data Load Times, etc.

Hello Forums:
I saw this website:
http://www.s-w-h.com/index.php?language=en
And found that a website like this loaded very quickly, and
seemed to fit almost all resolution.
I was wondering how did they make it fit dynamically? And how
did they manage to reduce load times so significantly?
I kinda wondered if it's possible to develop a massive forum
or online community thing using purely Flash. Would that be
possible? What if there were lots of user interaction, can the load
times be significantly cut down?

Does it load all the data while connected with 5GHz frequency… What is the IP address that you are getting from the Router? You can check the IP address in the following manner:
If you wish to find out your own IP address, you should run the same ms-dos prompt by clicking Start -> All Programs -> Accessories -> Command Prompt. A black pop up box should come up, type: "ipconfig /all" … There check the IP address and Default Gateway under LAN….
# Open up the browser and on the address bar type “IP address of Default Gateway” that will open up the Router setup page…
# In that page itself make the MTU size to 1400 from Auto….
# Make the following Channel Settings of 2.4 GHz you can make Channel Width to 20 MHz only and Channel to 6, 9, 11.. Click Save Settings...
Then check the connectivity…

Similar Messages

How to tune data loading time in BSO using 14 rules files ?

Hello there,
I'm using Hyperion-Essbase-Admin-Services v11.1.1.2 and the BSO Option.
In a nightly process using MAXL i load new data into one Essbase-cube.
In this nightly update process 14 account-members are updated by running 14 rules files one after another.
These rules files connect 14 times by sql-connection to the same oracle database and the same table.
I use this procedure because i cannot load 2 or more data fields using one rules file.
It takes a long time to load up 14 accounts one after other.
Now my Question: How can I minimise this data loading time ?
This is what I found on Oracle Homepage:
What's New
Oracle Essbase V.11.1.1 Release Highlights
Parallel SQL Data Loads- Supports up to 8 rules files via temporary load buffers.
In an Older Thread John said:
As it is version 11 why not use parallel sql loading, you can specify up to 8 load rules to load data in parallel.
Example:
import database AsoSamp.Sample data
connect as TBC identified by 'password'
using multiple rules_file 'rule1','rule2'
to load_buffer_block starting with buffer_id 100
on error write to "error.txt";
But this is for ASO Option only.
Can I use it in my MAXL also for BSO ?? Is there a sample ?
What else is possible to tune up nightly update time ??
Thanks in advance for every tip,
Zeljko

Thanks a lot for your support. I’m just a little confused.
I will use an example to illustrate my problem a bit more clearly.
This is the basic table, in my case a view, which is queried by all 14 rules files:
column1 --- column2 --- column3 --- column4 --- ... ---column n
dim 1 --- dim 2 --- dim 3 --- data1 --- data2 --- data3 --- ... --- data 14
Region -- ID --- Product --- sales --- cogs ---- discounts --- ... --- amount
West --- D1 --- Coffee --- 11001 --- 1,322 --- 10789 --- ... --- 548
West --- D2 --- Tea10 --- 12011 --- 1,325 --- 10548 --- ... --- 589
West --- S1 --- Tea10 --- 14115 --- 1,699 --- 10145 --- ... --- 852
West --- C3 --- Tea10 --- 21053 --- 1,588 --- 10998 --- ... --- 981
East ---- S2 --- Coffee --- 15563 --- 1,458 --- 10991 --- ... --- 876
East ---- D1 --- Tea10 --- 15894 --- 1,664 --- 11615 --- ... --- 156
East ---- D3 --- Coffee --- 19689 --- 1,989 --- 15615 --- ... --- 986
East ---- C1 --- Coffee --- 18897 --- 1,988 --- 11898 --- ... --- 256
East ---- C3 --- Tea10 --- 11699 --- 1,328 --- 12156 --- ... --- 9896
Following 3 out of 14 (load-) rules files to load the data columns into the cube:
Rules File1:
dim 1 --- dim 2 --- dim 3 --- sales --- ignore --- ignore --- ... --- ignore
Rules File2:
dim 1 --- dim 2 --- dim 3 --- ignore --- cogs --- ignore --- ... --- ignore
Rules File14:
dim 1 --- dim 2 --- dim 3 --- ignore --- ignore --- ignore --- ... --- amount
Is the upper table design what GlennS mentioned as a "Data" column concept which only allows a single numeric data value ?
In this case I cant tag two or more columns as “Data fields”. I just can tag one column as “Data field”. Other data fields I have to tag as “ignore fields during data load”. Otherwise, when I validate the rules file, an Error occurs “only one field can contain the Data Field attribute”.
Or may I skip this error massage and just try to tag all 14 fields as “Data fields” and “load data” ?
Please advise.
Am I right that the other way is to reconstruct the table/view (and the rules files) like follows to load all of the data in one pass:
dim 0 --- dim 1 --- dim 2 --- dim 3 --- data
Account --- Region -- ID --- Product --- data
sales --- West --- D1 --- Coffee --- 11001
sales --- West --- D2 --- Tea10 --- 12011
sales --- West --- S1 --- Tea10 --- 14115
sales --- West --- C3 --- Tea10 --- 21053
sales --- East ---- S2 --- Coffee --- 15563
sales --- East ---- D1 --- Tea10 --- 15894
sales --- East ---- D3 --- Coffee --- 19689
sales --- East ---- C1 --- Coffee --- 18897
sales --- East ---- C3 --- Tea10 --- 11699
cogs --- West --- D1 --- Coffee --- 1,322
cogs --- West --- D2 --- Tea10 --- 1,325
cogs --- West --- S1 --- Tea10 --- 1,699
cogs --- West --- C3 --- Tea10 --- 1,588
cogs --- East ---- S2 --- Coffee --- 1,458
cogs --- East ---- D1 --- Tea10 --- 1,664
cogs --- East ---- D3 --- Coffee --- 1,989
cogs --- East ---- C1 --- Coffee --- 1,988
cogs --- East ---- C3 --- Tea10 --- 1,328
discounts --- West --- D1 --- Coffee --- 10789
discounts --- West --- D2 --- Tea10 --- 10548
discounts --- West --- S1 --- Tea10 --- 10145
discounts --- West --- C3 --- Tea10 --- 10998
discounts --- East ---- S2 --- Coffee --- 10991
discounts --- East ---- D1 --- Tea10 --- 11615
discounts --- East ---- D3 --- Coffee --- 15615
discounts --- East ---- C1 --- Coffee --- 11898
discounts --- East ---- C3 --- Tea10 --- 12156
amount --- West --- D1 --- Coffee --- 548
amount --- West --- D2 --- Tea10 --- 589
amount --- West --- S1 --- Tea10 --- 852
amount --- West --- C3 --- Tea10 --- 981
amount --- East ---- S2 --- Coffee --- 876
amount --- East ---- D1 --- Tea10 --- 156
amount --- East ---- D3 --- Coffee --- 986
amount --- East ---- C1 --- Coffee --- 256
amount --- East ---- C3 --- Tea10 --- 9896
And the third way is to adjust the essbase.cfg parameters DLTHREADSPREPARE and DLTHREADSWRITE (and DLSINGLETHREADPERSTAGE)
I just want to be sure that I understand your suggestions.
Many thanks for awesome help,
Zeljko

How to find Data load time ?

Hi,
Where do i look for the Total data load time ? from data source to PSA ?

Hi Honar,
1) Goto monitor of IP, in header tab you can find the runtime of IP.
2) So you are loading data from source to BW.In IP header tab copy the req number, goto the source systems from which data is loading.
goto SM37 give the request number with BI as pre-fix, you will find the total run time of job with job log.
Hope this helps.

How can data load time can be optimized using routine

Hi,
Data laod is taking too much time . How can data load time can be optimized using routine
Regards,
Vivek

Hi Vivek,
If you have code wirtten, please try to post the same, so that i cna help you in optimising it and give it you...
General Guideleines.
1. Dont use select statement inside the loop.
2. where possibel try to use Read statement with Binary Search Option and avoid using loop statement.
3. Try to avaoid joins if you are using any, isntead use For alll entries.
4. Try When u use for all entries try to make sure that your internal tbale is not initial.
5. Try to Sort and delete adjacent duplicates from internal tables wherever needed.
6. Use clear statement whererver required.
Regards,
Nanda.S

Data Load time

I have 12 files which are similar in size. When they were loaded on one server, the load time is pretty consistent. For example, it takes about 100 seconds for loading each of the 12 files. On the other server, however, the data load time increases dramatically when loading later files, i.e., 100s, 120s, 180s....The essbase version are the same on both servers (window 2000). What could cause this problem? Is this something to do with server settings or essbase settings? Thanks for your response.Lin

Hi,Can you please specify the version of Essbase server and development tool (app manager, admin services)?Have you checked the dense/sparce configuration?Grofaty

Data load times

Hi,
I have a question regarding data loads. We have a process cahin which includes 3 ods and cube.
Basically ODS A gets loaded from R/3 and the from ODS A it then loads into 2 other ODS B, ODS C and CUBE A.
So when I went to monitor screen of this load ODS A-> ODS B,ODS C,CUBE A. The total time shows as 24 minutes.
We have some other steps in process chain where ODS B-> ODS C, ODS C- CUBE 1.
When I go the monitor screen of these data loads the total time the tortal time for data loads show as 40 minutes.
I *am suprised because the total run time for the chain itself is 40 minutes where in the chain it incclude data extraction form R/3 and ODS's Activations...indexex....
*Can anybody throw me some light?
Thank you all
Edited by: amrutha pal on Sep 30, 2008 4:23 PM

Hi All,
I am not asking like which steps needed to be included in which chain.
My question is when look at the process chain run time it says the total time is equal to 40 minutes and when you go RSMO to check the time taken for data load from ODS----> 3 other data targets it is showing 40 minutes.
The process chain also includes ods activation buliding indexex,extracting data from R/3.
So what are times we see when you click on a step in process chain and displaying messages and what is time you see in RSMO.
Let's take a example:
In Process chain A- there is step LOAD DATA- from ODS A----> ODS B,ODS C,Cube A.
When I right click on the display messages for successful load it shows all the messages like
Job started.....
Job ended.....
The total time here it shows 15 minutes.
when I go to RSMO for same step it shows 30 mintues....
I am confused....
Please help me???

How to decrease the dynamic table data loading time

hi
i have problem with dynamic table.
when i execute the the table with passing a query , getting lot of time for loading the table data.( it takes 30sec for every 100 rows.)
pls help me how to overcome this problem.
thanks advance.

Yes, This is oracle application...
We can move into other tablespace as well. But concern is how to improve the alter table move command performance.
Is there any specific parameter apart from the nologging and parallel server..
If it is taking 8 hours , can some have experience that nologging will save how much time. or is there any risk in doing in production.
Regards

Problem Occrued in Data loading (Time Stamp Error)

Hi,
Iam scheduled info package after its showing time stamp error in the monitor menu header status is red and details menu 0 records . time stamp error in the source system.
my problem is i have all genric transaction data sources i checked in R/3 in RSA3 and Rsa6 i excuted in that particular data sources are active and its contain some records also.
before loading the data i replicated all data sources these all active in BI system. but once scheduled the infopackage all data sources going to in active status.
i Tried to Execute T code SE38 in BW give programme name as RS_Transtrucuture_activate .
but i dont have authorisation these program to excute.if i want get authorisation i have to wait 3 days.
please suggestme another solution procedure.
Regards,
Diwa(Devakar tati Reddy)

Hi,
I am not sure about what BW version are you using. I hope you are using 3.5 or low. After Datasource replication you need to activate your transfer structure / infosource. I understand that you dont have authorization to run the SE38 program to activate the transfer structure. But, you can also try to activate each transfer structure/infosource individually through edit mode of the same. This is the only way out if you donot have the authorization for SE38.
Regards
Kishore

Data load time out error.

Hi Gurus,
We have initialized one of our infocube, its having more then 14lakhs of data. each PSA data packet(90 in number)contains 15k odd record. Out of the 90 PSA data packets,10 successeded while yesterday night load scheduling, Now I am scheduling each packet individually through manual upload by right clicking on the data packet, every time its resulting in runtime error.
Itu2019s a highly time consuming load, so canu2019t schedule it again.
Do you have any other solution?????
Thanks in advance,
Kironmoy Banerjee.

Hi,
try to see which step in the package it is taking the time....is it the start routines??
just see if there are start routines in the update rules.
May be you should reduce the size of the data package when you first loaded but since you are alredy loading it from PSA its not possible.
if you can delete the request again and reload it again via PSA and this time reduce the size of package to may be 5000 or 4000 then it should load.
You can do the settings for nthe infopckage which you are using to schedule the load..go in the infopackage .... infopackage->schedule->datas. source option..
change the size for the delta as well as for full loads.
then the schedule the loads again...do an init without data transfer and a full repair without selections this time.
Thanks
Ajeet

Data loading time too long

Hi there,
I have two Infopackages - one for year 2003 and one for year 2004. For year 2003 I use interval 200301-200312 and for year 2004 I use interval 200401-200412 as data selection. Then I started to load data from R/3. For year 2003 we have 4.9 Millions records and took 6 hours to load and for year 2004 we have 5.5 Millions records and took 46 hours to load. The interesting thing was that when I tried to use InfoPackage 2003 and put the interval 200401-200412 as data selection for loading 2004 data, it took only 7.x hours! Why? Is something wrong with the InfoPackage for 2004? Any idea and suggestion is greatly appreciated.
Weidong

Hi Weidong,
Check the processing type in both the infopackages. May be one of the infopackages has "PSA and then into Data Target" and the other infopackage has "PSA and Data Target in parallel".
Bye
Dinesh

Two issues: activation of transfer rules and data load performance

hi,
I have two problems I face very often and would like to get some more info on that topics:
1. Transfer rules activation. I just finished transport my cubes, ETL etc. on productive system and start filling cubes with data. Very often during data load it occurs that transfer rules need to be activated even if I transport them active and (I think) did not do anything after transportation. Then I again create transfer rules transports on dev, transport changes on prod and have to execute data load again.
It is very annoying. What do you suggest to do with this problem? Activate all transfer rules again before executing process chain?
2. Differences between dev and prod systems in data load time.
On dev system (copy of production made about 8 months ago) I have checked how long it takes me to extract data from source system and it was about 0,5h for 50000 records but when I executed load on production it was 2h for 200000 records, so it was twice slower than dev!
I thought it will be at least so fast as dev system. What can influence on data load performance and how I can predict it?
Regards,
Andrzej

Aksik
1 How freequently this activation problem occurs. If it is one time replicate the datasource and activate thetransfer structure( But in general as you know activation of transfer structure should be done automatically after transport of the object)
2 One thing for difference of time is environmental as you know in production system so many jobs will run at the same time so obiously system performance will be slow compare to Dev System. In your case both the systems are performing equally. You said in dev system for 50000 records half an hour and in production 200000 records 2hrs so records are more in Production system and it took longer time. If it is really causing problem then you have to do some performance activities.
Hope this helps
Thnaks
Sat

How do you fix the date (day number only) in menu bar to match correct Date and Time Preferences?

My date and time preferences all show up as correct and I get "Sun 10:54 AM" in the menu bar (correct), but when I click that to quickly get the day's date, I get "Sunday, August 5, 2011". The '5' is the only thing that is wrong, and it has remained '5' for the last 3 days, even thought the Date & Time Preferences are correct. Is there any easy fix for this? I don't know if August will change to September, but the day of the week has kept up with time!

I know how to get the full date and time, etc. to show up on the menu bar (and it shows up correctly), so it's just a little 'glitchy' thing that when you click on the date/time in the menu bar, the greyed date remains on the '5th' of August - sort of like that Groundhog Day movie!

EC-CS Data Loading Strategy

Hello. We are currently in the process of implementing the Enterprise Consolidation Transaction Data InfoCube (0ECCS_C01).
We are attempting to develop a data loading strategy for the InfoCube. Since this InfoCube does not have a delta process, reloading the entire cube on a daily basis is not feasable due to the length of time. We would like to set it up where it would load the current month for actuals plus into the future for forecast dollars.
Has anyone established a data loading process for their consolidated accounting InfoCube that works well and keeps data loading time to a minimum?
Best regards,
Lynn

Hi,
You could prepare packages:
one which you upload all data from previous years/months
second with OLAP variables (for example 0DAT) which you upload data only from present day/month/year - depends which variable you select (add this package to the chain).
When the second package will crash, you have to repeat procedure.
Regards,
Dominik

Route and Loading Time

All Gurus:
I am trying to create a route for a specific shipping point (one plant) where the loading time is different for every route. I am looking at configuration for defining shipping point:
IMG > Enterprise Structure > Definition > Logistics Execution > Define, copy, delete, check shipping point. Under "Determine Times", there is "Determine load. times" and 4 options:
     No loading time determination
A     Route dependent
B     Route independent (Route '      ')
C     Default from shipping point
If select "C" and specify 11 days for "Loading Time with Days", the system will always have 11 days defaulting on the sales order schedule lines between the "Loading Date" and the "Goods Issue Date".
What I need is to have more flexibility as to the number of days on the Loading time. If I select A or B, can you please let me know what that would do and where I can configure it so that the system gives me more flexibility as to the number of Loading Days?
Thanks in advance,
Ta

Tal -
When the loading date and GI date is same you can change the GI date by adding number of days in the field "TransLdTm". This time will get calulated as loading time. In each route definition this may vary according to requirement. this will give you different transit time determination for single ship point.
In configuration do setting as below e.g.
TransitTime               10
Trav.dur.
TransLdTm.               1
TrLeadTimeHrs
With this system will calculate in reverse way from delivery date to customer based on route transit time.
Material availability date + loading time (1) + transit time (10) ... this will be the calculation.
Hope this answers your question. Let me know anything else you require on this.
Regards
Amol

Suggest good strategy for data load through standard datasources

Hi BW Gurus,
we currently are using standard purhasing related datasources. We forsee new reports coming in later based on the standard datasources.
Can you please suggest a good general startegy to follow to bring in R/3 data. Our concerns are towards data loads [ initializations etc..] as some of the standard datasources are already in production.
please advice.

Hi
go through these web-blogs - From Roberto Negro it may help you.
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
Regards,
Rajesh.

Data Load Times, etc.

Similar Messages

Maybe you are looking for