Data loaded in Infocube is not visible in the Reporting

Hi all,
In the info cube, the data is not visible for reporting, How can i make it available for reporting,
When i select the Manage option from the context menu of the cube and select the Requests Tab, i get a pop up message that tells
" There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoCube/ODS object that is OK from a quality point of view, but is not yet displayed in reporting.
The problem, for example, is to do with request 0000018049, number REQU_F4ZBFRMDGBULE9WCUN3R5UX5X."
How do i find out the inconsistancies?
PS: All the requesta are delta upload
There is no aggregates for this cube.
Thanks n regards
Girikumar

Hi Girikumar
Use the RSRV transaction and select All Elementary Tests  in the dropdown ->Transaction data  , select the Consistency of the Time Dimension for an InfoCube  and select your cube and Execute the button ..if any error are there it will display the inconsistency ..Repair the Inconsistency with Correct Button..
Check the other test also ..
Hope the above helps you..\
Bye
Shu Moh..

Similar Messages

  • Data Migration Opening Balances are not updating in the Report F.08

    Hi,
    We have uploaded the GL balances in 2008 for the year 2007. But they are not updating in the F.08 report when i executed for 2008.
    Why they are not updating in the report. In which table can i check the Data migration values in the system?
    Thansk
    Kishore

    Hi We have uploaded all the values in 2008 with 2008 date. fiscal year is K4.
    F.08 Report for the year 2008 is showing only 2008 accumulated values. But not showing the Opening balances which we have uploaded in 2008 for the before years like 2007.
    Why it is showing like that?
    Thansk
    kishore

  • Section not visible in the report painter

    Hi Gurus,
    I created a report painter report for showing the P&L statement for a company code. I had to added a new section for calculating the statistical key figures. I was able to display the 2 sections initially, but later after changing some layout the keyfigures section is not visible anymore.
    Please let me know how can I retrieve the Key figures section.
    Thanks

    Hi Christian,
    And if you execute the report you don't see the second section?
    Yes, I am able to see the section in the edit mode and not when execute the report.
    In the report layout "formatting / report layout" in the area "rows / treatment of zero rows" are the rows hidden if the value is zero?
    The standard section layout has zero rows hidden. I tried changing it to print zero rows, but that didn't help.
    Maybe you have a selection where you only have zero values in this section so it does not appear?
    I was able to see the section in execute mode once, but then I tried to change the layout which caused me this problem. Please let me know if you have any other inputs.

  • Keyfigure display attribute not visible in the report

    Hi,
    I am facing a problem. I have <b>keyfigures as display attributes</b> in my master infoobject. Earlier I was able to see those <b>display keyfigure attributes</b> in my query and was able to use them in it. After that, few changes were done to the master infoobject (addition of few attributes and deletion of few - but none of them were what I was using). Now after the change, when I open the query in design mode, it gives me error saying that it can't access those attributes (only keyfigure display attributes) and repairs the query (removes those attributes). All the other attributes are visible.
    I have already tried rsrv for the master infoobject (corrected the error) and rsrt for the query. After that also it doesn't solve the problem.
    What could be the reason? Any pointers would be highly appreciated.
    Thanks,
    Saket

    Hi,
    Display keyfigure attributes are visible in the reports because I was using and running them in the reports before the change in that particular master infoobject. Only, keyfigures maintained as attributes can't be made navigational (hence can't be used for drilldown). Its only after the change, there is this error.
    I had also checked the authorization for Keyfigure earlier, which I have. Therefore its not the problem.
    Thanks for the help anyways! Any more pointers? Btw, I am working on BW3.5.
    Thanks,
    Saket

  • Ole object not visible on oracle report

    Hi,
    I have an oracle report built in oracle report 6i builder I have used a Boilerplate OLE Object(image.bmp) in the report but when I am executing the report on Oracle E Business(Application) then that OLE object is not visible on the report output(output is in the pdf format).
    Please help me out with this
    Thanks in advance

    If you want to display an image on your report, use Link File as item type in the Layout Editor.
    Note that the image has to be accessable from the Reports Server.

  • Navigational attribute data not visible in BEx Report

    Hello All,
    I am facing following problem in one of my BEx reports:
    I am fetching data from an ODS. With other columns of ODS,  I have also to show few navigational attributes( which are master data of some info-object) . In report the corresponding data in navigational attributes is not visible for few records, although when I see the master data of this Info-object (whose navigational attributes I have to include), in  Adm. Wrkbench the data is visible. I wonder what step is missing.
    Many Thanks for helping me out.
    Best Regards,
    Sumita

    Hi Roberto,
    While trying to activate the Infoobject's master data (by right-click) I get the following message,
    "Lock NOT set for: Loading master data attributes"
    And the data is not activated.
    Can you please suggest what needs to be done.
    Thanks & Regards,
    Sumita

  • Graph which should display the data of a view object not visible

    Hi,
    I have a main page which contains a <af:panelAccordion> component with three <af:showDetailItem> components. Each of these <af:showDetailItem> components contain a page fragment. In each of these page fragments are a <af:table>, <dvt:pieGraph>, <dvt:lineGraph> and a <dvt:areaGraph> which represent data of view objects.
    In the first <af:showDetailItem> window all components are visible. But when I click on another <af:showDetailItem> all components are visible except the <dvt:areaGraph>. Weird is when I insert a <af:commandLink> into the page fragment without any functions. Also the link doesn't invoke any mehtod and partial submit is set to false. Now when I click on this link the <dvt:areaGraph> with its data become visible and show the data.
    The area graph and the line graph have partial triggers set to the table. Because when another row in the table is selected, the area and line graph should show data which is dependent on the selected row of the table.
    Has anybody an idea?
    Thanks in advance!
    Edited by: user13061309 on 27.07.2010 06:53

    Hi Frank,
    thanks for your response.
    I created a fragment-based flow and dragged it onto the main page as a region component. The main page contains the panelAccordian with its showDetailItem's. Each of the showDetailItem components of the panelAccordian contain such a region component.
    Now I set the partial trigger's property of the region component pointing to the showDetailItem component which contains the region but nothing changed. The graph is still not visible at the first click on the detailItem. I also set the trigger's property of the region component pointing to the panelAccordian but also nothing happens.
    Regards
    Michael
    Edited by: user13061309 on 06.08.2010 03:00

  • Data load buffer [1] does not exist error when loading cube

    Hello
    I'm trying to load data using Essbase Studio. Everything was working fine, the load used to occur very quickly.
    After updating the SQL query to load a larger period ( 5 years instead of 2 ), the load fails after exactly 10 minutes ! I'm wondering if there's a timeout configuration or something similar in Essbase because I have other cubes that has large queries that are stopping after exactly 10 minutes.
    The environment is:
    Essbase 11.1.2.1 on Linux 64 bits
    Data source: Oracle 10r2 database
    This is Essbase Studio Log
    Failed to deploy Essbase cube
    Caused By: Failed to load data on database: CartTst.
    Caused By: driver.DriverException.GetDatabaseInfoFailed
    Caused By: IO Error: Socket read timed out
    Caused By: Socket read timed out
    This is the Cube Application Log
    [Thu Jul 19 18:34:38 2012]Local/CartTst///1136855360/Info(1013210)
    User [ERS0411@AD_Directory] set active on database [CartTst]
    [Thu Jul 19 18:34:38 2012]Local/CartTst/CartTst/ERS0411@AD_Directory/1114749248/Info(1013091)
    Received Command [LoadBufferTerm] from user [ERS0411@AD_Directory]
    [Thu Jul 19 18:34:38 2012]Local/CartTst/CartTst/ERS0411@AD_Directory/1114749248/Error(1270040)
    Data load buffer [1] does not exist

    I am getting the same error: Data load buffer [2] does not exist
    When I changed the load rule it works fine.
    Thanks Glenn

  • Infocubes are not visible in $INFOCUBE Folder in Universe Designer

    Hi, Queries are seen and accessible but Infocubes are not seen $INFOCUBE Folder in Universe designer. Please let me know what might be the problem and please suggest the solution.
    Environment: SAP BI 7.1, BO Edge3.0.
    Thanks in advance.

    Hi
    When opening BW infocubes from crystal reports we have problem:
    In se37 ; we executed BAPI function BAPI_MDPROVIDER_GET_CUBES
              - put in as the CATALOG $INFOCUBE.
    when we did the above steps. i got this message "201No InfoProvider exists with name "YN_SUBFAM". adn there are around 350 entries.
    But infocubes are not visible in $INFOCUBE Folder in the crystal reports. Is it bug? how can we resolve this issue. all infocube are active in rsa1.
    Please help us

  • Essbase Error - 1270040 Data load buffer [2] does not exist

    When building dimension for ASO cube, it keeps giving me this error message. Do I need to activate or increase the Data Load Buffer when building dimenions manually (not using MaxL)? It allows me to build part of the dimensions using about 100 records from the load file, but once the record number increases it gives out this error and shows the dimension build error. Appreciate any help!!!

    I am getting the same error: Data load buffer [2] does not exist
    When I changed the load rule it works fine.
    Thanks Glenn

  • Dashboard data not visible for the users - buffer issue?

    It occurred several times last weeks that some out of 7 dashboards are not visible to the Dashboard users.
    The scenario is the same all the time: users fills in the data, reviews it and posts some comments. Next morning the user canu2019t see the data in the system.
    What can be the problem?

    Hi,
    IF your Company has NEtweaver License and the SAPNET User has access right to download section, you must be able to add SP Stacks to Download Basket.
    If you have license and use have access, then please contact with local SAP Subsdiary for this problem.
    But to be able to download some patches, you must have Solution Manager & Maintanance Optimizer to approve the items in basket.

  • Goods are not visible on the Web Shop main page (RUMP UP)

    Hi colleagues.
    Help please anybody :)
    There was the problem with the goods in Web Shop.
    Goods are not visible on the page Web Shop.
    Below you can see actions performed by us and Prerequisites:
    1. Repository was unachieved from Standard archive - WEC20_MDMCATALOG_CONS
    2. Taxonomy, Hierarchy and Lookup table data were transferred from CRM via MDMGX
    3. Manually created root node in Product Catalogs table in MDM
    4. Put technical code (ID) of created node to Product Catalog module in WCEM configuration - field Catalog ID.
    5. Fill another necessary fields in Product Catalog module in WCEM.
    6. Manually add test record in MDM and linked to node in Product Catalog table, elements from Main Taxonomy and other required fields.
    7. In preview mode of WCEM configuration not possible see any records from MDM (but product catalog elements showed correctly)
    More information about settings in MDM, CRM,WCB and configuration steps can see in attachment files
    Best regardn,
    Andrey

    Hi Denis
    Leading zeroes it's no my case, because the products (materials) replicated from CRM to MDM.
    Replication from CRM to MDM via MDMGX and Initial Load R3AC1 is successfull.
    But on the WebChannel web shop page this products are not visible.
    I have suggested that the problem in authirizations of technical user, which uses RFC Destinations from SAP NW AS Java (Web Channel) to MDM.
    According Security Guide for SAP Web Channel 2.0 (paragr. 8.3.2 see please screenshot), user of WEC_MDM_DEFAULT destination must assign the role WEBCHANNEL_CATALOG_DISPLAY_ROLE.
    But this role does not exist in the system (SAP MDM, SAP NW).
    Please give me advice about this.

  • I updated win7 and now I cant see ff. I have reinstalled it 5 times now. It shows it is running in task manager but it is not visible on the desk top.

    I installed win7 ultimate and then ff. ff worked fine until I installed win7 service pack 1 and all the other updates it recommended. I click to open ff and nothing happens. I look in task manager and it shows it is running. It is not visible on the screen or in the task bar. I have reinstalled a fresh download of it 5 times. I even tried the beta version but still the same problem. I can use explorer and chrome ok but not ff.

    The "System Tray" is located at the very bottom right of your screen and is a list of most/all running applications that will show in this list.
    For your SysFader issue, this "may" be the problem:
    1 Find the "My Computer" desktop icon and right-click it. A pull-down menu will appear. Select "Properties."
    2 Click on the "Advanced" tab. This will load a new page of options.
    3 Select the "Visual Effects" tab at the top of the window and deselect "Animate Windows when minimizing and maximizing," "Fade or slide menus into view," "Fade or slide Tool Tips into view" and "Fade out Menu items after checking."
    4 Click "OK." This will remove most if not all of the Sysfader effects, at the same time correcting related errors that used to come up during opening a new file or program.

  • Hi...m using a mac pro quad core.....its not booting up...i can only  see the apple logo and a circle loading...could not get into the login screen

    hi...m using a mac pro quad core.....its not booting up...i can only  see the apple logo and a circle loading...could not get into the login screen...any suggestions please.....m in the middle of a project and now i have got this one
    regards,
    v.s.bharan

    Welcome to Apple Discussions!
    Do you keep your data backed up?
    If not, you should always do so*:
    http://www.macmaps.com/backup.html
    You never know when a hard drive or a directory might go bad.  Having a bootable clone is a must.
    That link also shows you some tools you can use to recover data.
    If you aren't backed up, try buying those tools first, before attempting to repair the directory.
    Directory issues can be fixed with these tools*:
    http://www.macmaps.com/directoryfaq.html

  • ESS job created not visible in the list of 'Scheduled Process'

    As a part of data migration , I am required to invoke an ODI scenario using a java program which in turn is invoked by an ESS job.I'm able to do the same using a standalone application created in my jdeveloper.For incorporating this into the Fusion application I created an ADF Model Project in the hcmEss Application and created a sample javaclass and jobdefinition in the project,similar to what i did in my standalone application.
    I have included my job definition in the MarHcmEss and included the MAR file in the EarHcmEss.Also I have given the jazn security for my job,similar to other visible jobs.Still the job that I created is not visible in the list of jobs in the 'Launch ESS Monitoring UI'
    All this i tested using a deployment of hcmEss and hcmTalent Applications into my standalone weblogic server.Is there anything that i might have missed during the process?.I am new to ESS.
    Thanks,
    Ajin

    I'm facing the same issue.
    Also I'm unable to populate the values from the Resource Bundle in the Localization section of Job Definition.
    Any help will be appreciated.
    Thanks,
    Sangita.

Maybe you are looking for