Data Loading Error for cube 0TCT_C22

Dear Colleagues,
I am working on BI 7.0 / SP09.
I am loading technical content cube 0TCT_C22 from datasource 0TCT_DS22. Till PSA, there is no problem with data load. But from PSA to data target, data load fails. Went to monitor and it shows teh error "Error calling number range object 0TCTPRCSCHN for dimension D2 ( ). Message no: RSAU023".
I tried to find the SAP notes fro this, but no success. Also checked the Dump and application logs, but nothing is there.
Please advice ASAP.
Regards
PS

Hi Pank,
I just solved the very similar issue. Try what I did to see if it works for you. For each dimension in each Infocube a number range is created. For some weird reason during the activation of the Infocube the number range for the dimension giving troubles was not created. Look for it in TCODE SNRO and you should find a number range per each dimension in the cube but the one giving you error.
To solve it, (the easiest way I found) just add any characteristic to the problematic dimension. Activate the Infocube. After that, modify again you Infocube and remove the characteristic you just added to leave the dimension how you need it. Activate the Infocube again. By doing that you will force the regeneration of the dimension and with it the number range. You can chek in TCODE SNRO and the number range should be there. Try loading your data again and it should work.
One thing I don't understand is why that number range sometimes is not created during activation
Good luck, I hope you can solve it!!!
Regards,
Raimundo Alvarez

Similar Messages

Data load error for Init.

Hello Gurus,
I am having some problme in loading Init,
In data load i am getting following error messages,
1,System error occurred (RFC call)
2,Activation of data records from ODS object ZDSALE01 terminated
3,No confirmation for request ODSR_45F46HE2FET0M7VFQUSO2EHPZ when activating the ODS object ZDSALE01
4Request REQU_45FGXRHFHIKAEMXL3D7HU6OFR , data package 000001 incorrect with status 5
5,Request REQU_45FGXRHFHIKAEMXL3D7HU6OFR , data package 000001 not correct
6,Inserted records 1- ; Changed records 1- ; Deleted records 1-
Please help me in resolving these errors.

Hi,
are you loading a flat file? If yes check if the file is available at the specified path and if you/sap has the authority to access that path/file.
regards
Siggi

Data load error for master data

hi
both errors i need to fix manually or any automatic is there
psa i need to edit that record and run again infopackage.
i need keep that infoobject(BIC/ZAKFZKZ ) alpha conversion at infoobject level.
Errors in values of the BOM explosion number field:
Diagnosis
Data record 5584 & with the key '001 3000000048420000 &' is invalid in
value 'BOX 55576\77 &' of the attribute/characteristic 0RT_SERIAL &.
InfoObject /BIC/ZAKFZKZ contains non-alpha compliant value 1

Hi Suneel,
I feel that the symbol '&' is cauing the issue in ur data loads..
So try to edit the same at the PSA and then load the data from PSa to the target..
Also u can use RSKC to handle these special Chars..
For more information u can search SDN..
Thanks
Hope this helps

Data Loading Error : ToomanyError records.

Hi All,
I got Data Loading error when I am loading from Flat File.
Following is the error message :
Too many error records - update terminated
Error 18 in the update
No SID Found for value '00111805' of Characterstic ZUNIQUEID (Message No 70)
can anybody help in resolving the issue.
Regards,
Chakravarthy

hi
Check the format of your charecteristics and key figures .
Check you put data separators in you flat files approriately
In the particular charecteristics ZUNIQUEID ,ensure data is consistent...check the related tables
Assign points if useful
Regards
N Ganesh

Data Load error Please respond ASAP

Hi ,
When i am trying to load data for year 07 using rule files its showing an error and aborting the data load
Error Msg " Data Value [2007] Encountered before all dimensions Selected,[5] Records Completed"
Any help greatly appreciated.
Thanks

Key here is that 5 records were loaded before failing on the 6th, indicating it's not a header issue on the load rule.
Check the first 5 records and see how the column containing 2007 differs between them and the failing 6th record. Perhaps the 6th record has a null (as indicated eariler) or prehaps 2007 is not the name of the member in the outline.
I have had both issues give similar error results.
J

Data load error regarding timestamp

Hi All,
I am getting data load error related to time.
I am using 2lis_02_SCN for CNFTM(time stamp) filed
with value "08:00:" need to convert to 08:00:00...for some records and rest of the records are coming with normal 6 digit time.
please send your suggestion as early as possible.
Thanks
Rupa

Hi Rupa,
Try out following sample code inthe transfer rule for the same info object and it should work
lv_len = strlen( str ).
if lv_len = 4.
concatenate str '00' into str.
endif
Regards
Kapadia

Common data load errors in BI 7

Hi , i would appreciate if any one can provide me a list with most common Data load errors effecting both master and transactional data in SAP BI 7 or BW 3.5..

Hi AAL,
There're lots of loading error posts in this forum. This one I guess is good for you:
production support errors
production support issues
Or you can search yourself using key word common load error etc.
Hope above helps.
Regards,
Frank

Sap bw 7.3 master data load error

sap bw 7.3 master data load error
erroe: Exception in Substep Rules

Hi Jayram,
I am assuming that you are getting this error when you are loading data from PSA to IO. If so, the error might be because of
1. Duplicate records
PSA might have duplicate records. But you will be able to load only one record to Master data IO. In DTP Update tab, there is an option for "Handle Duplicate Record Keys" . Just enable this & try to load again.
2. Erroneous records.
Some special reocrds are allowed in PSA where as thye might not be allowed in Master Data/Data Targets like Lower case letters/ some speacial characters etc. If error is because of this, then you might need to correct the data at PSA level & reload the data to Master data. Else get it corrected in source system itself & fetch the data to BW. Or write some code to take care of these special characters.
Hope it helps!
Regards,
Pavan

Data load error--urgent

hi friends ,
we are geting data load error as; Process 000087 for deterermined fro infoobject DUVTYPE started in STATUS TAB and in DETAILS TAB update(251new/160 chnaged): Errors occured.
what should i know from information and what are the reasons for this load failure and possible rectification methods.
This load is through process chains and aslo a delta load.
Can i delete the request and start the infopackage manually? also will it make my Process chain Green automatically or should i repeat from the subsequent process?
Plz help.
I award points.
regards,
siddartha

Hi siddharta,
look in the details of the monitor to see the error. Be very cautious with deltas! They can not be repeated every time. it depends on the datasource! What you can do is delete the failed request from all(!) the data targets meanwhile!
Regards,
Jzergen

Most common BW data load errors in production and how to solve them ..

Hi All,
Most common BW data load errors in production and how to solve them ..
Any doc on it ,if so plz send it across to this id [email protected]
Thanks in advance.
Rgrds
shoba

hi
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light error message:
Master data/text of characteristic 'so and so' already deleted .
9) extraction job aborted in r3
10) request couldnt be activated because theres another request in the psa with a smaller sid
11) repeat of last delta not possible
12) datasource not replicated
13) datasource/transfer structure not active ´
14) Idoc Or Trfc Error
15. ODS Activation Error

What are the frequent data load errors in production support?

what are the frequent data load errors in production support?

It is a long list. Here is some of them.
1. Idoc not arriving from source system.
2. previous processes failed.
3. change run unsucessful or did not run properly and data in master data is messed up.
4. invalid characteristics in the data.
5. Duplicate records found.
and on and on.
Ravi Thotahdri

Data loading sequence for 0FIGL_014

Hi experts,
Can you explain or brief the data loading sequence for 0FIGL_014?
Regards.
Prasad

Hi,
Following is my system configuration information
Software Component      Release             Level                  Highest support                  Short Description
SAP_BASIS                     620                    0058                   SAPKB62058                      SAP Basis Component
SAP_ABA                        620                    0058                   SAPKA62058                      Cross Application Component
SAP_APPL                       470                    0025                   SAPKH47025                       Logistics and Accounting
SAP_HR                           470                    0030                   SAPKE47030                       Human Resources
With the above configuration in R/3, I am not able to find the data source 0FI_GL_14.
Can you please let me know what package to install and how to install?
Regards.
Prasad

Need data loader script for Buyer Creation for R12

Hi ,
Anybody has data loader script for Buyer creation in R12. Please copy paste one line in the reply on this message.
Thanks

Hi ,
Anybody has data loader script for Buyer creation in R12. Please copy paste one line in the reply on this message.
Thanks

Check data load performance for DSO

Hi,
Please can any one provide the detials, to check the data load performance for perticular DSO.
Like how much time it took to load perticular (e.g 200000) records in DSO from R/3 system. The DSO data flow is in BW 3.x version.
Thanks,
Manjunatha.

Hi Manju,
You can take help of BW statistics and its standard content.
Regards,
Rambabu

Error regarding data load into Essbase cube for Measures using ODI

Hi Experts,
I am able to load metadata for dimensions into Essbase cube using ODI but when we are trying same for loading data for Measures encountring following errrors:
Time,Item,Location,Quantity,Price,Error_Reason
'07_JAN_97','0011500100','0000001001~1000~12~00','20','12200','Cannot end dataload. Essbase Error(1003014): Unknown Member [0011500100] in Data Load, [1] Records Completed'
'28_JAN_97','0011500100','0000001300~1000~12~00','30','667700','Cannot end dataload. Essbase Error(1003014): Unknown Member [0011500100] in Data Load, [1] Records Completed'
'28_JAN_97','0011500100','0000001300~1000~12~00','500','667700','Cannot end dataload. Essbase Error(1003014): Unknown Member [0011500100] in Data Load, [1] Records Completed'
Can anyone look into this and reply quickly as it's urgent requiremet.
Regards,
Rohan

We are having a similar problem. We're using the IKM SQL to Hyperion Essbase (DATA) knowledge module. We are mapping the actual data to the field called 'Data' in the model. But it kicks everything out saying 'Unknown Member [Data] in Data Load', as if it's trying to read that field as a dimension member. We can't see what we missed in building the interface. I would think the knowledge module would just know that the Data field is, um, data; not a dimension member. Has anyone else encountered this?
Sabrina

Data Loading Error for cube 0TCT_C22

Similar Messages

Maybe you are looking for