Data loading..few records could not be loaded

Hi Sapiens
i am loading data from one source to bw. all records have been loaded except for 10 reocrds which were missing. How can be we load only the 10 missing records.
i dont want to load all records again.
Plz guide
Regs
Sanju

Hi Sanju,
You can load those records by doing a repair full update or full update and by giving the unique selections for those 10 records in your Infopackage in BW>
In details go to your infopackage, put Full update (Tick the Repair full indicator) and go to selection tab and give Doc Number or some selection criteria by which you can only extract those 10 records.
Let us know if you facew any problems.
Thanks
CK

Similar Messages

Firefox reset completely, attempted to restore old Firefox data, will not open saying that profile could not be loaded.

Hello,
When returning to my computer, I attempted to open Firefox and received a prompt to either start Firefox in safe mode or reset it. I tried safe mode at first then proceeded to reset it as well. Losing all of my add-ons/extensions/etc, I tried to solve the problem by restoring my profile with a folder that appeared on my desktop titled "Old Firefox Data". After following instructions to restore my profile, a window now pops up saying that my profile could not be loaded and Firefox just does not open at all. Is there anyway to recover my old profile? I tried following another suggested method but when searing for my profile through the files, it could not be found.
Thank you!

'''https://support.mozilla.org/en-US/kb/recovering-important-data-from-an-old-profile'''
Recovering important data from an old profile
If you've had to create a new Firefox profile, this article will explain how to recover information like bookmarks, history and passwords from an old one.

Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?

Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?

Thanks. I can change the forwarding settings in Gmail to be either POP or IMAP. That is quite simple. I just looked at those settings on the Gmail server and, to my surprise, both are enabled. In order for outlook client on my computer to receive IMAP emails I have to change the email account settings in my current outlook from POP to IMAP. I don't need to be using the Exchange version of Outlook to receive IMAP. I guess I'll do a little research tomorrow on Exchange so i can figure out what, if anything, it might do for me.
I glanced at the link you sent me and it looks like it might be very helpful - another project for tomorrow.
BTW: I hit "This Solved my Question" by accident. I meant only to "like' your response so you would get some benefit from the help you've given me so far. I hope I haven't discouraged others from taking a shot at helping me. I suspect there is more than one way to approach this and, as you know, my problem isn't really solved until I have what I need all set up and running smoothly.

The data base DLL 'crdb_dao.dll' could not be loaded.

This has been posted in other threads but I've not seen a final resolution.
I used VS2008 to create an application that includes Crystal Reports and One Click in VS2008 to create a runtime system to distribute my application. The system installs and runs properly on a 32 bit system but fails to run on a 64 bit system. I get a message on the 64 bit system that says
The data base DLL 'crdb_dao.dll' could not be loaded.
I cannot find the crdb-dao.dll module on the 64 bit system but can find it on the 32 bit system. Can anyone tell me how to overcome this problem?
Thanks!
John

Hi John,
Moved to .NET Developer Forum. As noted in those other threads, there is no 64 bit version of the DAO driver. Your only option is to use ODBC or OLE DB.
No plans to create one because I don't Microsoft does NOT support their Access driver in 64 bit modes. See this Microsoft article on the history and supportability of DAO:
http://msdn.microsoft.com/en-us/library/ms810810.aspx
In this article it states:
There is no 64-bit version of the Jet Database Engine, the Jet OLEDB Driver, the Jet ODBC Drivers, or Jet DAO available. This is also documented in KB article 957570. On 64-bit versions of Windows, 32-bit Jet runs under the Windows WOW64 subsystem. For more information on WOW64, see http://msdn.microsoft.com/en-us/library/aa384249(VS.85).aspx. Native 64-bit applications cannot communicate with the 32-bit Jet drivers running in WOW64.
Thank you
Don
Edited by: Don Williams on Apr 27, 2010 6:56 AM

Transfer to new PC: The project could not be loaded, it may be damaged or contain outdated elements

The Problem
I have transferred a large and functioning Premiere Pro project to a more powerful PC but am unable to run it, stopped by the error message "The project could not be loaded, it may be damaged or contain outdated elements".
Facts
The new PC has a 6-core processor and a different hard drive configuration but the operating system on both is Windows 7 and both PCs host up-to-date Premiere Pro CS6 (as part of Adobe Production Premium). The PCs are networked and Premiere Pro on the old PC can successfully load and run the project file located on the new PC, proving that the transferred file is not damaged. Also, preceding versions of the same project generate the same error message when run on the new PC except, very oddly, for earlier versions saved on or before 28 June 2011, when the project was only a fifth of its current size; those versions load correctly. Contemporary notes show that the editing carried out that day was simple timeline editing, ie no After Effects etc (that came later), and the project has worked fine then and since.
So I don't have a damaged project file and don't know what "outdated elements" means.
Help
Any help solving this problem would be much appreciated.

Hi Vinay
As suggested I renamed the additional folder, created a new project, set 'Custom' editing mode, 'Microsoft AVI' as the preview format with 'Uncompressed' codec.
Unfortunately the results were similar to before: On importing the original project into the new project I was sequentially asked for the locations of various files, including After Effects .aep files. The final file location request, for an mp3 audio file, was followed by lots of conforming and indexing. During this process the 'Where is the file XXX.mp3? window stayed locked open. Eventually, with all conforming etc finished, this window was still open and locked. Clicking anywhere on the screen caused a 'ding' and another, smaller, box opened, listing three .aep files. This box asked no questions and gave no options for selecting a file location so, with the topmost file highlighted, I just clicked 'ok' and the box disappeared, leaving the 'Where is the file XXX.mp3?' box still open.
The importing process took about 30 minutes. I waited another 10 minutes, in case something was happening in the background, but with the Task Manager CPU usage value sitting on 0 or 1%, I used it to shut down the project.
For what it is worth, I created a simple new project on the old PC – just a few video clips and transitions in a single sequence (no After Effects etc). This project was then transferred to the new PC and it opened successfully.
Again I remain grateful to you for this and any more advice.
Best regards
Dave

When i want to download an app in app store give me an error number and i could not down load.how i can solve this error number?

When i want to download an app in app store give me an error number and i could not down load.how i can solve this error number?

Hi Amir.09395340646,
Welcome to the Support Communities!
What app are you trying to download? Is it iPhoto for iOS? What error message are you receiving? The first thing I would suggest is to log out of your iTunes Store account on your iPhone. Then restart the device and log in again.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311?viewlocale=en_US
If the above did not resolve your issue, follow the troubleshooting steps in the article below.
The link includes the complete details and screenshots, but I've highlighted a few points for you:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
- Make sure that your iOS software is up to date by connecting your iOS device to iTunes and clicking on Check for Update in your device's Summary page in iTunes.
- Check and verify that you are in range of a Wi-Fi router or base station. If you are on a 3G capable device, make sure that cellular data is turned on from Settings > General > Cellular.
- Check to make sure you have an active internet connection. You can check the User Guide for your device for help with connecting to the internet.
- Check to make sure other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the internet.
- Try resetting (turning off and then on again) your Wi-Fi router
- If the issue still persists see, iOS: Troubleshooting Wi-Fi networks and connections or iOS: Troubleshooting Wi-Fi networks and connections.
I hope this information helps ....
- Judy

0x80230729 (The extension could not be loaded.)

Hi,
I've been working on this most of the day without any luck. I'm wondering if anyone has seen something like this.
PCNS can successfully deliver the password change to an AD target, so PCNS should be OK.
The failure occurs when we add the Oracle EBS Web Service management agent to the password sync targets.
The error message indicates that the Microsoft.IdentityManagement.WebService.MA.dll cannot be loaded due to an incorrect .NET framework version.
An unexpected error has occurred during a password set operation.
"BAIL: MMS(5080): d:\bt\9394412\private\source\miis\ma\core\passwordext.cpp(322): 0x80230729 (The extension could not be loaded.)
ERR_: MMS(5080): d:\bt\9394412\private\source\miis\ma\core\passwordext.cpp(804): Please verify that the password extension dll can be located in the Extensions directory.
If the extension is present, confirm that the version of the .NET framework that can run the extension is installed on the server and that a supportedRuntimes entry in the configuration files specifies that version. The synchronization engine will not be able
to load an extension that is built with a newer version of the .NET framework than the version of the .NET runtime it is hosting.BAIL: MMS(5080): d:\bt\9394412\private\source\miis\ma\core\passwordext.cpp(806): 0x80230729 (The extension could not be loaded.)
BAIL: MMS(5080): d:\bt\9394412\private\source\miis\ma\extensible\export.cpp(2821): 0x80230729 (The extension could not be loaded.)
BAIL: MMS(5080): d:\bt\9394412\private\source\miis\ma\extensible\export.cpp(2866): 0x80230729 (The extension could not be loaded.)
BAIL: MMS(5080): d:\bt\9394412\private\source\miis\server\server\exportpassword.cpp(474): 0x80230729 (The extension could not be loaded.)
BAIL: MMS(5080): d:\bt\9394412\private\source\miis\server\server\ma.cpp(7961): 0x80230729 (The extension could not be loaded.)
BAIL: MMS(5080): d:\bt\9394412\private\source\miis\server\server\ma.cpp(8410): 0x80230729 (The extension could not be loaded.)
Forefront Identity Manager 4.1.2273.0"
I ran an Environment.Version command and it returns that we are using 4.0.30319.296.
In the dllhost.exe.config file, we have the settings:
<?xml version="1.0" encoding="UTF-16"?>
<configuration>
<configSections>
<section name="resourceManagementClient" type="Microsoft.ResourceManagement.WebServices.Client.ResourceManagementClientSection, Microsoft.ResourceManagement"/>
</configSections>

<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0.30319"></supportedRuntime>
<supportedRuntime version="v2.0.50727"></supportedRuntime>
</startup>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="Microsoft.MetadirectoryServicesEx" publicKeyToken="31bf3856ad364e35" />
<bindingRedirect oldVersion="3.3.0.0" newVersion="4.0.1.0" />
<bindingRedirect oldVersion="4.0.0.0" newVersion="4.0.1.0" />
</dependentAssembly>
</assemblyBinding>
</runtime>
</configuration>
So, I think it looks like it should be trying to run the dll under the 4.0.30319 framework. The documentation says that framework is required and we are running it.
The dll is in the Extensions folder.
Has anyone seen this before or something like it? Any ideas on where else I could check?
Thanks,
Sami

Thank you for your reply. I've tried running in and out of proc with the same error showing up.
I tried a few different modifications to the miiserver.exe.config (as well as Mmsscrpt.exe.config and the Dllhost.exe.config files). I tried changing 4.0.30319 to 4.0 as per this article:
http://msdn.microsoft.com/en-us/library/w4atty68.aspx
Even though we are only on FIM R2 (not on SP1), I tried a variation on the config file changes recommended here:
http://support.microsoft.com/kb/2772429 but I referenced the newVersion as 4.0.1.0.
Still no luck.
Here's the miiserver.exe.config file. Maybe you'll see something glaringly wrong? Thank you for your help!
<?xml version="1.0" encoding="UTF-16"?>
<configuration>
<configSections>
    <section name="resourceManagementClient" type="Microsoft.ResourceManagement.WebServices.Client.ResourceManagementClientSection, Microsoft.ResourceManagement"/>
    <section name="resourceManagementService" type="Microsoft.ResourceManagement.WebServices.ResourceManagementServiceSection, Microsoft.ResourceManagement.Service"/>
    <section name="resourceSynchronizationClient" type="MIIS.ManagementAgent.ResourceSynchronizationClientSection, mmsmafim"/>
</configSections>

<startup useLegacyV2RuntimeActivationPolicy="true">
    <supportedRuntime version="v4.0.30319"></supportedRuntime>
    <supportedRuntime version="v2.0.50727"></supportedRuntime>
</startup>

<resourceSynchronizationClient/>

    <system.diagnostics>
        <sources>
            <source name="ForefrontIdentityManager.ManagementAgent" switchValue="Warning">
                <listeners>
                    <add initializeData="ForefrontIdentityManager.ManagementAgent" type="System.Diagnostics.EventLogTraceListener, System, Version=2.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089"
                         name="MAExceptionEventLogListener" traceOutputOptions="LogicalOperationStack, DateTime, Timestamp, Callstack">
                    <filter type="" />
                    </add>
                </listeners>
            </source>
            <source name="ForefrontIdentityManager.ManagementAgent.EventTracingForWindowsTraceSource" switchValue="Verbose">
                <listeners>
                    <add name="MAEventTracingForWindowsListener"
                         type="System.Diagnostics.Eventing.EventProviderTraceListener, System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
                         initializeData="{C4D0C1D4-909D-481b-B011-10E682A6009C}" />
                </listeners>
            </source>
        </sources>
    </system.diagnostics>
    
    
    

<startup useLegacyV2RuntimeActivationPolicy="true">
    <supportedRuntime version="v4.0.30319"></supportedRuntime>
    <supportedRuntime version="v2.0.50727"></supportedRuntime>
</startup>
<runtime>
    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
      <dependentAssembly>
        <assemblyIdentity name="Microsoft.MetadirectoryServicesEx" publicKeyToken="31bf3856ad364e35" />
        <bindingRedirect oldVersion="3.3.0.0" newVersion="4.0.1.0" />
        <bindingRedirect oldVersion="4.0.0.0" newVersion="4.0.1.0" />
      </dependentAssembly>
    </assemblyBinding>
</runtime>
</configuration>

The database DLL 'crdb_p2bbtrv.dll' could not be loaded.

I'm using Visual Studio 2008 to develop an ASP.NET application to display reports created using Crystal Reports XI.
We currently have a working VB6 application that employees use to launch reports written in Crystal Reports XI. My task is to rewrite the user interface using Visual Studio 2008 in ASP.NET and provide the reports on our company ASP.NET portal.
The reports that need to be launched are all existing reports written in XI. There is no VB code that defines data connection; it just launches the report in a report viewer.
Here is the VB 6 code:
Set CrystalApplication = CreateObject("CrystalRuntime.Application.9")
Set CrystalReport = CrystalApplication.OpenReport(grsReports!ReportFile)
crViewer.ReportSource = CrystalReport
crViewer.ViewReport
Very simple!
Now this should be simple to reproduce in ASP.NET page; 30min top.
Dim crystalReport As New ReportDocument()
crystalReport.Load(q.ReportLoc)
CrystalReportViewer1.ReportSource = crystalReport
I created the page threw it up on the server and everything looks fine. When the user selects a report they are presented with a box that says enter values. They enter the date range and select OK. Then BOOMB!
The error message u2013 u201CFailed to load database information. Details: The database DLL 'crdb_p2bbtrv.dll' could not be loaded. Error in File C:WINDOWSTEMPvoucher reprint by voucher {AE5F62B2-1704-428D-8DCD-4BD83001BF49}.rpt: Failed to load database information.u201D
When I open the report in Crystal it works just fine and I dont get any errors, even on the server
I installed process monitor on the server
1. I've deployed the CRRedist2008_x86.msi (BootStrapper) on the server.
2. Installed Crystal Report XI on the server
3. Installed pervasive PSQL
I folllowed the SAP links.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7b6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333333363338333933333331%7d.do
Install the Btrieve database engine on the system with the Visual Studio .NET application. How do I do that?
Thank you

Hi Larry,
The problem is you originally used the CR Basic version which is included with VS 2008, cr version is 10.5. So what you are doing is going backwards in CR runtime version.
Next problem is CR Basic for VS 2008 does not include the native Btrieve driver and the one included in the XI runtime will not work in VS 2008. VS 2008 and CR basic only supports the basic ODBC, OLE DB and few others drivers...
When you downloaded the trial version of CR 2008 use Service Pack 3 full version and rebuild your app with the updated 12.3.x.x runtime, 12.0.1100.x and 12.0.2000.x assembly versions. And when you do install CR 2008 SP 3 select the custom option to manually select the native btrieve/pervasive driver, it's not installed by default. Now your application will spefifically look for CR 2008 rutime, if you don't update by rebuilding the app it will continue to use the 10.5 runtime.
Now when you build your deployment package also use the Service Pack 3 Redist MSI package, it will include the native driver.
If you don't purchase CR 2008 your license will run out in a month and your users will not be able to continue using your app.
If you don't upgrade your only option is to convert your reports to ODBC and then verify you are not using any CR XI specific features, they won't work in CR 10.5 runtime.
Hope this clears it all up for you?
Thank you
Don

The database connector "Crdb_p2bpfx.dll" could not be loaded

Hello,
I received a new laptop, and now my reports no longer work. I get the error "The database connector "Crdb_p2bpfx.dll" could not be loaded" then several others that follow. I have ODBC connections setup that test successfully and I connect to the database via other means. I am using Crystal Reports Professional version 11.5.12.1838 on Windows 7. I have seen a few other posts regarding this file, but nothing that seemed to address my particular situation. Any help would be greatly appreciated, Thank you.

No references. Only from the DB driver name it tells me you are using a report that was originally created off that Third Party DB driver. How to get around it is something we don't have any details on nor can we. Search using Google, it may tell you something..
After searching I see it is the DataFlex Driver: http://www.pfxcorp.com/faqcrystal.htm
PFXcrystal FAQ
How can Crystal Reports 9, 10, XI, XI R2 and 2008 work with PFXplus data?
Crystal Reports can access Powerflex database directly, connecting via PFXcrystal; or through ODBC, connecting via PFXodbc.
Contact DataFlex for assistance... They were an OEM Partner or had the source code. So somewhere you got those reports from their product and or package...
Don
Edited by: Don Williams on Jan 16, 2012 1:54 PM

Exporting to TEXT error: crdb_universe.dll could not be loaded

In Crystal Designer, a report connecting to a UNIVERSE is saved with data.
An RDC app open, previews, and exports that rpt file to various formats. No problems, except when exporting to a TEXT format.
When TEXT is used as export format, the following export error is generated:
Failed to load database information
The database DLL 'crdb_universe.dll' could not be loaded
Further debugging indicates this is related to having a subreport with no records inside the main report. Even though the report is marked as having saved data, the TEXT export format views an empty subreport as a reason to refresh the data for the subreport.
I suspect this is simply a bug and I assume nothing will be done about it, so I'll close the issue as if it was answered.
Cheers,
ido

Eric,
I posted the message on the Linux form since the description of the error refers to an issue with connecting to the DB on a Linux Machine.
You are definitely right in saying that it is a windows error, since CRXI Developer is installed on my XP computer. I guess I was a little confused as well.
Thanks,
Rick

Hi...m using a mac pro quad core.....its not booting up...i can only see the apple logo and a circle loading...could not get into the login screen

hi...m using a mac pro quad core.....its not booting up...i can only see the apple logo and a circle loading...could not get into the login screen...any suggestions please.....m in the middle of a project and now i have got this one
regards,
v.s.bharan

Welcome to Apple Discussions!
Do you keep your data backed up?
If not, you should always do so*:
http://www.macmaps.com/backup.html
You never know when a hard drive or a directory might go bad. Having a bootable clone is a must.
That link also shows you some tools you can use to recover data.
If you aren't backed up, try buying those tools first, before attempting to repair the directory.
Directory issues can be fixed with these tools*:
http://www.macmaps.com/directoryfaq.html

Error: One or more categories of approval could not be loaded when user wants to approve

Two of my PM's are getting the error shown in the title of this post (Error: One or more categories of approval could not be loaded when user wants to approve).    The "Related Topic" issues a work around of using the rules to "automatically approve the
offending items".   This did not work for us.   Has anyone else experienced this issue?
Thanks,
~RK

Hi Marc - Per ytour request:
The PM does the following:
1. Access PWA Home page and review messages
2. Clicks on “You have 1 timesheet from resources pending your approval” message
3. Approval Center Page loaded with “Error: One or more categories of approval could not be loaded” and “There are no new approvals to review at this time. If you have published your plan and
still do not see approvals, have your resources submit updates from “Tasks” of “Timesheet”” messages.
We've made certain the Schedule is published and the timesheet was submitted correctly.
Expected behavior: Timesheet records should be available for review and approval.   Instead, the PM gets the screen below with the error message

Solaris Management Console toolbox could not be loaded

Hello,
when I start SMC I get this error, toolbox http://ultra:989/toolboxes/smc.tbx could not be loaded. I only noticed this yesterday, and I think it is related to some patch that was applied recently. When I did wget http://ultra:898/toolboxes/smc.tbx I got these headers
HTTP/1.0 200 OK
Date: Thu, 27 Oct 02005 21:21:52 GMT
Server: Tomcat/2.1
Content-Type: text/plain
Servlet-Engine: Tomcat/2.1 (Java 1.4.0_01; SunOS 5.9 sparc; java.vendor=Sun Microsystems Inc.)
Last-Modified: Tue, 31 Aug 02004 21:27:14 GMT
and wget complains of
Last-modified header invalid -- time-stamp ignored.
perhaps it is this header that's invalidating the download and so SMC complains?
This is solaris 9 on an ultra 5, fully patched (up to yesterday).
Thanks for your help!

I seem to have come across the same issue as well. On an Ultra 2, I'm running Solaris 10 1/06 (after an upgrade from Solaris 10 5/05). SMC 2.1 was working fine before I applied the latest Recommended Solaris 10 patch cluster. Now when starting smc, I get the message,
"Server Not Running
No Solaris Management Console server was available on the specified server. Please ensure there is a Solaris Management Console server available on the specified host and that it is running."
with stop signs for all the management tools. I do not have patch 121309 installed which I suspect applies to the 6/06 release. In comparison to a working system, neither workstation had the entry for "smc 898/tcp" in its /etc/services file. I added it but did not make a difference so I removed the entry.
"/etc/init.d/init.wbem stop/start" did not do the trick. Using dananderson's advice in,
http://forum.java.sun.com/thread.jspa?threadID=5057915
I ended up having to completely remove and re-add all packages that had to do with smc using the Solaris 1/06 installation CD set. I confirmed smc was working again without the error. Update Manager suggested I add patches 121308-08 and 124188-02. Hesitantly, I added those two patches, rebooted and confirmed smc produced the error message again. I removed patches 121308-08 and 124188-02 and smc started working again. I will have to refrain from applying those patches so it continues to run.
I wish I had further explanation as to why those updates are killing my smc.

XMII WebService shows error as - SOAP Service could not be loaded: null

Dear Friends,
   I'm doing the xMII <-> XI <-> RFC scenario with the reference of the blog: https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/8703. [original link is broken] [original link is broken] [original link is broken] I just create an asyncronous scenario. Sender with SOAP adapter and receiver with RFC adapter. After creating the WSDL file from the scenario, I stored it in the xMII server path D:XISendere10099xMII_integration_1_Outbound_MI.wsdl. Then in the WebService action block of xMII BLT, I gave the URL as this file path, user name and password of XI server and click Next. Then I got the error message as SOAP Service could not be loaded: null.
   Please give the solution for this issue.
Regards,
Jagan.

Dear Selvam,
   Actually I checked those things already. Everything is fine. I executed already HTTP <-> XI <-> xMII scenario and it was working fine. I checked with SendSMS.wsdl file now. That is also working fine. I am attaching the WSDL file, which I am using, for reference. This file is working fine in SOAPSonar and data posted in SAP R/3 table. But it is showing the error in xMII as "SOAP Service could not be loaded: null".
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions name="xMII_integration_1_Outbound_MI" targetNamespace="http://www.xxx.com/XIBatch3/10099/xMII_Integration_1" xmlns:p1="http://www.xxx.com/XIBatch3/10099/xMII_Integration_1" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"><wsdl:types><xsd:schema targetNamespace="http://www.xxx.com/XIBatch3/10099/xMII_Integration_1" xmlns="http://www.xxx.com/XIBatch3/10099/xMII_Integration_1" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><xsd:element name="xMII_integration_1_Outbound_MT" type="xMII_Integration_1_Out_DT" /><xsd:complexType name="xMII_Integration_1_Out_DT"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">750324e0438311ddad100019bb528b1e</xsd:appinfo></xsd:annotation><xsd:sequence><xsd:element name="Vendor" type="xsd:string"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">b24fc7d01b6611dd8de7001320eb83c5</xsd:appinfo></xsd:annotation></xsd:element><xsd:element name="Name" type="xsd:string"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">b24fc7d11b6611dd8b8e001320eb83c5</xsd:appinfo></xsd:annotation></xsd:element><xsd:element name="Street" type="xsd:string"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">b24fc7d21b6611ddcc29001320eb83c5</xsd:appinfo></xsd:annotation></xsd:element><xsd:element name="City" type="xsd:string"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">b24fc7d31b6611dd8303001320eb83c5</xsd:appinfo></xsd:annotation></xsd:element><xsd:element name="Dist" type="xsd:string"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">b24fc7d41b6611ddcd00001320eb83c5</xsd:appinfo></xsd:annotation></xsd:element><xsd:element name="Country" type="xsd:string"><xsd:annotation><xsd:appinfo source="http://sap.com/xi/TextID">b24fc7d51b6611dd9fa5001320eb83c5</xsd:appinfo></xsd:annotation></xsd:element></xsd:sequence></xsd:complexType></xsd:schema></wsdl:types><wsdl:message name="xMII_integration_1_Outbound_MT"><wsdl:part name="xMII_integration_1_Outbound_MT" element="p1:xMII_integration_1_Outbound_MT" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" /></wsdl:message><wsdl:portType name="xMII_integration_1_Outbound_MI"><wsdl:operation name="xMII_integration_1_Outbound_MI"><wsdl:input message="p1:xMII_integration_1_Outbound_MT" /></wsdl:operation></wsdl:portType><wsdl:binding name="xMII_integration_1_Outbound_MIBinding" type="p1:xMII_integration_1_Outbound_MI" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"><soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" /><wsdl:operation name="xMII_integration_1_Outbound_MI"><soap:operation soapAction="http://sap.com/xi/WebService/soap1.1" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" /><wsdl:input><soap:body use="literal" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" /></wsdl:input></wsdl:operation></wsdl:binding><wsdl:service name="xMII_integration_1_Outbound_MIService"><wsdl:port name="xMII_integration_1_Outbound_MIPort" binding="p1:xMII_integration_1_Outbound_MIBinding" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"><soap:address location="http://aprins07:8010/XISOAPAdapter/MessageServlet?channel=:A_Test:xMII_Integration_1_xMII_Sender_CC&version=3.0&Sender.Service=A_Test&Interface=http%3A%2F%2Fwww.xxx.com%2FXIBatch3%2F10099%2FxMII_Integration_1%5ExMII_integration_1_Outbound_MI" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" /></wsdl:port></wsdl:service></wsdl:definitions>
Regards,
Jagan.

The database DLL 'crdb_odbc.dll' could not be loaded.

Post Author: lurked
CA Forum: Data Connectivity and SQL
Hi guys.The post title explains the problem...I'm using Crystal Report XI : Developper with Windows Server 2003.I need to display reports over the web, so I'm using the Crystal Report ActiveX Viewer.All is working fine for now, except the following : When I try to show the report, I only see the Viewer's border, with the viewer empty, and on the top, its written : Failed to load database information. Details: The database DLL 'crdb_odbc.dll' could not be loaded.
I searched my computer, and I found many different crdb_odbc.dll(I used many different versions of Crystal Report), they all are in the Common Files folders, and I tried to register it, but since there is no Entry, I cant register it. I also un/re-installed Crystal Report, both on the server AND on the client machine, and I keep getting the same error message.So I'm kinda stuck now.. If anybody knows where I should head first, to get over this problem, it would be very nice.Thanks.François BoivinSTAS, Analyst Programmerwww.stas.biz

Post Author: V361
CA Forum: Data Connectivity and SQL
when you set up your ODBC connection what type of connection did you create. Does it work from any machine ?. You might want to try adding another ODBC connection to the Windows Server, Chose System DSN (If that is appropriate for your environment) and try the openlink generic (Again If that is appropriate for your environment) Whatever you call this connection, you will need a clone on the server side as well, same name, same case, same everything.... Not sure if this will help, but I had some situations were I got a similar error, and doing the above fixed my problem.... ( I am using SQL server though, so....)

Data loading..few records could not be loaded

Similar Messages

Maybe you are looking for