Data loading for Logistics Data Extraction 2LIS_06_INV through setup tables

Hi Guyz,
I have LO Datasource 2LIS_06_INV which I am using for extracting Invoice Verification Data.
I had intialized and loaded invoice data in BI system and was using chais to load daily.
Now I want to load data again from scratch from source system.
As of now I know we need to delete and fill up setup tables in source system keeping the users locked so that no new records are created that particular moment.
But what about the delta queue and extraction queues.
Do I need to do something over there because as I understand there will be records in both of them so before filling the setup tables I need to delete both the queues and then fill the setup tables so that duplicate records should be avoided.
Please let me know what exactly should I do in detail.
Appreciated in advance.
Regards,
raps.

hi,
this entirely depends upon the DS, if the DS delta type supports overwrite mode then you need not lock the users, you can start the setup job without deleting the delta queues as well coz even if the record is extracted twice the values won't mess up as the flow will be in overwrite mode. If delta type of DS is Additive in table ROOSOURCE then you need to lock down the users or run the job over a weekend when no users are logged in.
regard,
Arvind,

Similar Messages

Simple basic question on attribute data load for Master Data InfoObject....

Hi
I am a bit confused & wanted to have some clarification on the following:
1) For loading Attributes data to Master Data InfoObject, we load it through Data Source of Type Master Data Attribute.
But what i did, i created Data Source of type Transaction data and using the same Excel file, i was able to create transformation with Matser data Attribute and was able to load the data.
This shows i can use Data source of type either master data attribute OR Transaction Data doen't matter while loading into master data attribute. IS THIS TRUE?
2) I have 2 master data infoobjects (Test1 & Test2). I made Test2 as an attribute in Test1.
My question is while loading Master data for Test1, will it also load the data into Test2 if it doen't find respective data in Test2?
(i did all the transformation as per need.)
Waiting for your reply....
Thanks...

HI Harpal,
1. Did you make a transformation between attribute data source from source system other than flat file and DSO?...
I think PC File is flexible in this aspect..
2.While loading Test1 the infoobject Test2 will get loaded only if it is a navigational ttribute..(You can see this by refering the SID Table)
Please also note that it does not load Test2 attributes.
regards,
Rakesh.

XML data load for master data

All,
Is it possible to load master data using XML datasource. If yes how. We are already using XML load for the transactional data. When we try for the Master data the option "create BW datasource with SOAP connection" is greyed out.
Thanks.

Hi,
Check out this Doc
How toSend XML Data to BW
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21d8aa90-0201-0010-5e83-a3798b9a5ee0
regards,
San!

Master Data Load to APO from SAP MDM through SAP PI

Hi SDners,
This is a Parts Master Data Solution for one of the Largest Auto Manufacturer where SAP MDM will be the central hub of all the Global and Local attributes of Parts . The subscribing system is SAP SCM APO . Please advice if there is any possibility of direct integration between APO -MDM through PI. Does PI has the standard IDOC types to communicate with APO.
Also does APO has some RFC/BAPI to do master data load for Product Master /n/sapapo/mat1
Thanks,
Prabuddha

Hi,
Check the LUWs in SM58 in source system and then execute it. Else check in BD87 and push the IDocs manually in ECC.
Thanks
Reddy
Edited by: Surendra Reddy on Feb 24, 2009 10:59 AM

Master Data Loading for Prices and Conditions in CRM - "/SAPCND/GCM"

Hi,
Could anyone give me some inputs on Master Data Loading for Prices and Conditions in CRM.
T. Code is: /SAPCND/GCM
I need to load data on a file (extracted from 4.6) for service contracts.
I tried LSMW : for this transaction, recording does not work.
I am trying loading thru Idocs (LSMW). But that too is note really working.
Do we require some custom development for this , or is some SAP standard funcntionality available ??
Can anyone provide some valuable inputs one this.
Would appreciate your responses.

Hi Tiest,
Thanx for responding.
U r right, our clint is upgrading from 4.6 to ECC.
So as per the clients requirements, we are maintaining all the configs for Services in CRM.
Services Data which was in 4.6 is being pulled put on flat files which needs to be loaded in CRM. So middleware would not be able to do this.
What I am looking os some standard upload program.
LSMW recording does not work.
This I-Doc "CRMXIF_COND_REC_SLIM_SAVE_M", i am able to load a single record. But I am not able to find , how to make this function for multiple entries.
IN standard we for loading master data thru I-docs, we map the values to the standard fields which are available in that I-Doc.
But in this particular i-doc, there is a common field for which I need to define the field name and a field value..
Till now, I am only able to define just one field name and a field value.
I want this to word for mutliple entries.
Hope u get my point.
Thanx

Master data Load for Substance Creation : Using BAPI in LSMW ?

Hi ,
Had any one did a Master data load for creating a Substance in SAP RM. If so please let me know the best possible option. I am beeing trying to figure out the option to load Substances and its IDENTIFIER / MATERIAL ASSINGMNET from my legacy system. But I am not geeting a clue to use LSMW. ( Direct or BatchInput )
I am not seeing any BAPI for uploading it through the LSMW except the one BUS1077 ( method SAVEREPMUL ) and I guess this is used along with IDOC.
Appreciate your help and suggestion.
David

Thanks John.
I will try this option what you have suggested. Even I told by business team to look for CG33. But they were been telling me some format issue. Probably they would meant the same what you have said. But they were not aware of work around for this. your information is intresting.
The other option given to me was to create a recording for each and every Tab like Substance header / Identifier / Material assignment etc. seperately. Technically I don't feel good to create in that way. Do you think that is alernate approach.?
With Respect & Regards
David

How to Run ebs adaptor data load for 1 year using DAC

Hi,
iam trying to Run the ebs adaptor data load for 1 year for procurement and spend ,Please let me know the parameter to set in DAC.
last extract date is set as Custom Format(@DAC_SOURCE_PRUNED_REFRESH_TIMESTAMP
Thanks

You need to set $$INITIAL_EXTRACT_DATE to a year ago. The LAST EXTRACT DATE is something used for incremental loads and you do not manually set that.
if this helps, mark as correct or helpful.

Problem in data sources for transaction data through flat file

Hello Friends,
While creating the data sources for transaction data through flat file, I am getting the following error "Error 'The argument '1519,05' cannot be interpreted as anumber' while assigning character to application structure" Message no. RSDS016
If any one come across this issue, please provide me the solution.
Thanks in Advance.
Regards
Ravi

Hallo,
just for information.
I had the same problem.
Have changed the field type from CURR to DEC and have set external instead of internal.
Then, the import with flatfile worked fine.
Thank you.

Master data loads for Attributes and texts failing

Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder

Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder

Need to skip the data load for one of the sub chain.

Hi All,
In our project, we have one meta chain and have many sub chains inside that. Today we don't want to run one of the sub chain. As we are in BW7.0, Skip options are not available. Can you please help how to stop the data load for the particular sub-chain.Please suggest.
Thanks.

Hi Jalina,
If this is a frequent request then you can create a custom ABAP Program and then use the below simple logic to skip/run the meta chain, but you will also have to change the link between the sub chains as "Always" instead of "Successful" so that no matter if the dependent chain is successful OR not the nex chain will proceed. If you are comfortable with event then you can also use event to achieve this
Program Logic- Create a new table where you maintain meaningful values (indicator/description) in it and the program should read the data from the table, Based on the values in the table the program will be successful/fail
Thanks
Abhishek Shanbhogue

Master Data Load for New Attribute

Hi Users,
We had to implement a separate load flow for a new field coming from R3. This field was to be added to existing master data object.
I added a new Display attribute for an existing 0GL_ACCOUNT master data object.
This new attribute along with some other existing fields is getting data from another master data object with an infosource in between because two transformations cannot be created for same source and target.
When i load the data i dont see data being populated for this new field. I did ACR, checked the keys e.t.c.
Source object has data but after executing DTP no data comes to this attribute. No routines or anything.
Please suggest
Regards
Zabi

Hi,
The situation is:
Field x from source maps to
1. field y ( which was existing field ) and also maps to
2. field z which is the new attribute.
field y has to get updated for company codes 10 for example.
field z for company codes 30.
now if i use same flow and map field x to both y and z then there is overwriting happening if 10 does not have value for x and 20 has then its not good.
So if i use a separate flow with infosource then i will map only x to z so after loads which means for 10 code if no value went in first dtp to y then if code 30 has value for x then z will only be updated and y remains empty....
Master Data Load for New Attribute

Master data load for 0COSTCENTER (Cost Center) failing

Hi Experts
I have a master data load for 0COSTCENTER (Cost Center). The Load has started failing from a couple of days at DTP.
(R) Filter Out New Records with the Same Key
(G) Starting Processing...
(R) Dump: ABAP/4 processor: DBIF_RSQL_SQL_ERROR
I am unable to understand the reason for this failure. I tried loading the data 1 costcenter at a time it is still failing so i doubt if its a internal table storage issue as suggested by the dump.
Could you help me on this one please.
Regards
Akshay Chonkar

Thanks All
I have got the issue resolved
The Error Stack for the DTP had accumulated so many entries that it was unable to process further.
So i deleted the entries in Error Stack usin SE14. Then again executed my DTP.
Everything is fine now thanks for your help.
Regards
Akshay Chonkar

Data load for VK11

Hi All,
can anyone suggest me about data load for VK11, I mean which method will be easier?
appreciate if you can send me the developed custom code
thanks.

Hi Kiran,
You can also use BAPI BAPI_PRICES_CONDITIONS.
Please check this link for sample codes.
Re: Sample code for BAPI_PRICES_CONDITIONS
Hope this will help.
Regards,
Ferry Lianto

Error while creating Data Source for master data attributes

Hi BI Experts,
Well its been some time for me that I have been part of Extraction in BI.I primarily handled reporting in my last assignments.
I was trying extraction with flat files in SAP BI 7(new to sap bi 7 but very much familiar with BW3.5) but failed in the activity during master data attributes and text upload in infoobject (say IOSP_Mat).
Here is the procedure that I did after creation of characteristic IOSP_Mat.I created a source system for flat file followed by data source for Master data attributes, i selected all the parameters correctly.i.e. csv file format, data seperator as ,
and other settings, now when i am trying to look at the proposed data in the next tab using Load example data.its not showing the desired result.The columns that I have maintained in Flat File is MAT_NUMBER and MAT_NAME (with say 100 data in the file)
same is the result when I am trying to load the text data too columns maintained are
(LANGUAGE MAT_NUMBER Short Description)(same 100 data).
now i used to rsa1old transaction to upload the file using 3.5 version.i created info source for master data/text/hierarchies for IOSP_Mat
now when trying to upload it using info package for master and text data,I observe its(the data) not maintained in the characteristic IOSP_Mat.
When I monitored ,I figured the data has not been even uploaded to the PSA level.
Can you BI experts tell me the answer for this.
Thanks,
Srijith

apologies to all of you for late response,
was busy with some other activities.
I don't remember the exact message,but I remember it was not loaded to even the PSA level.I will try it again and post the exact message.
Thanks again for your quick response.
Once again sorry to all of you for my late response
Thanks,
Sri

Data Source for BSEG Data base table

Hi Every one,
I need to create a data source for the data base table BSEG (Function Module Extraction).
I have followed below steps.
I have created extarct structure which contains all the fields of BSEG Data base table.If I save the data source I am getting error.
If I remove all the currecy fields from extract structure, I am able to activate the data sorce.
So Could you please explain me how to extract currency fields.

Hi,
Firstly, can you explain why you need a generic extractor for BSEG? There are already 2 datasources for BSEG, they are:
0FI_GL_4
http://help.sap.com/saphelp_nw70/helpdata/en/0c/b4973c115a6f3ae10000000a114084/frameset.htm
0FI_GL_14
http://help.sap.com/saphelp_nw70/helpdata/en/49/5700570223413085021a8b4ef1087a/frameset.htm
To use 0FI_GL_14, you should use the new GL in ECC side.
On the other hand, for your problem, your problem may occur if you did not give the reference unit field of your currency field in your extraction structure. when you double click the the currency field, you will see the ref. field, give the reference unit field in this area.
Regards.

Data loading for Logistics Data Extraction 2LIS_06_INV through setup tables

Similar Messages

Maybe you are looking for