Data loading from identical metadata of different databases

Dear All,
I have 8 Databases in source sql server and i need to load in oracle db which is target.I already loaded 1 db and i need to load other db data into the target which is oracle.
as i have same metadata ,there is a confliction while i load data into oracle where second db tables will have same key values as in first db.
i want to to :
1.what is the best way to access these 8 db's to load in oracle.
2.how to resolve the conflication about validating the same records already exists in db and i could not load it agian.
how can we achieve in owb.
regards,
kum

Ola Kum,
From youre question I understand that you'll have to combine tables with the same name into one single target (your datawarehouse)...
To get the data I would first get alle tables to your staging area within the target. here you can optimize quick loading ( try to get incremental loading, only get the changes within the source).
After this you have to determine specific caracteristics of each source. Questions you'll need to ask yourself:
Are all columns the same?
Iif not, what source db should take the lead?
Do you need to keep data seperate?
In that case you might need to duplicate columns and store the source in the column name as well...
the validation conflict must be resolved. As you already mentioned, the business key from two different sources could be the same. Ik would say you need to add the source to the business key combination. After this I would recommend using atificial key's when loading facts and dimensions.
Hope this helps!
Kind regards
Moscowic
Edited by: Moscowic on Aug 19, 2009 1:20 AM

Similar Messages

Data loading from flat file to cube using bw3.5

Hi Experts,
                   Kindly give me the detailed steps with screens about Data loading from flat file to cube using bw3.5
       ...............Please

Hi ,
Procedure
You are in the Data Warehousing Workbench in the DataSource tree.
       1.      Select the application components in which you want to create the DataSource and choose Create DataSource.
       2.      On the next screen, enter a technical name for the DataSource, select the type of DataSource and choose Copy.
The DataSource maintenance screen appears.
       3.      Go to the General tab page.
                            a.      Enter descriptions for the DataSource (short, medium, long).
                            b.      As required, specify whether the DataSource builds an initial non-cumulative and can return duplicate data records within a request.
                            c.      Specify whether you want to generate the PSA for the DataSource in the character format. If the PSA is not typed it is not generated in a typed structure but is generated with character-like fields of type CHAR only.
Use this option if conversion during loading causes problems, for example, because there is no appropriate conversion routine, or if the source cannot guarantee that data is loaded with the correct data type.
In this case, after you have activated the DataSource you can load data into the PSA and correct it there.
       4.      Go to the Extraction tab page.
                            a.      Define the delta process for the DataSource.
                            b.      Specify whether you want the DataSource to support direct access to data.
                            c.      Real-time data acquisition is not supported for data transfer from files.
                            d.      Select the adapter for the data transfer. You can load text files or binary files from your local work station or from the application server.
Text-type files only contain characters that can be displayed and read as text. CSV and ASCII files are examples of text files. For CSV files you have to specify a character that separates the individual field values. In BI, you have to specify this separator character and an escape character which specifies this character as a component of the value if required. After specifying these characters, you have to use them in the file. ASCII files contain data in a specified length. The defined field length in the file must be the same as the assigned field in BI.
Binary files contain data in the form of Bytes. A file of this type can contain any type of Byte value, including Bytes that cannot be displayed or read as text. In this case, the field values in the file have to be the same as the internal format of the assigned field in BI.
Choose Properties if you want to display the general adapter properties.
                            e.      Select the path to the file that you want to load or enter the name of the file directly, for example C:/Daten/US/Kosten97.csv.
You can also create a routine that determines the name of your file. If you do not create a routine to determine the name of the file, the system reads the file name directly from the File Name field.
                              f.      Depending on the adapter and the file to be loaded, make further settings.
■       For binary files:
Specify the character record settings for the data that you want to transfer.
■       Text-type files:
Specify how many rows in your file are header rows and can therefore be ignored when the data is transferred.
Specify the character record settings for the data that you want to transfer.
For ASCII files:
If you are loading data from an ASCII file, the data is requested with a fixed data record length.
For CSV files:
If you are loading data from an Excel CSV file, specify the data separator and the escape character.
Specify the separator that your file uses to divide the fields in the Data Separator field.
If the data separator character is a part of the value, the file indicates this by enclosing the value in particular start and end characters. Enter these start and end characters in the Escape Charactersfield.
You chose the; character as the data separator. However, your file contains the value 12;45 for a field. If you set u201C as the escape character, the value in the file must be u201C12;45u201D so that 12;45 is loaded into BI. The complete value that you want to transfer has to be enclosed by the escape characters.
If the escape characters do not enclose the value but are used within the value, the system interprets the escape characters as a normal part of the value. If you have specified u201C as the escape character, the value 12u201D45 is transferred as 12u201D45 and 12u201D45u201D is transferred as 12u201D45u201D.
In a text editor (for example, Notepad) check the data separator and the escape character currently being used in the file. These depend on the country version of the file you used.
Note that if you do not specify an escape character, the space character is interpreted as the escape character. We recommend that you use a different character as the escape character.
If you select the Hex indicator, you can specify the data separator and the escape character in hexadecimal format. When you enter a character for the data separator and the escape character, these are displayed as hexadecimal code after the entries have been checked. A two character entry for a data separator or an escape sign is always interpreted as a hexadecimal entry.
                            g.      Make the settings for the number format (thousand separator and character used to represent a decimal point), as required.
                            h.      Make the settings for currency conversion, as required.
                              i.      Make any further settings that are dependent on your selection, as required.
       5.      Go to the Proposal tab page.
This tab page is only relevant for CSV files. For files in different formats, define the field list on the Fields tab page.
Here you create a proposal for the field list of the DataSource based on the sample data from your CSV file.
                            a.      Specify the number of data records that you want to load and choose Upload Sample Data.
The data is displayed in the upper area of the tab page in the format of your file.
The system displays the proposal for the field list in the lower area of the tab page.
                            b.      In the table of proposed fields, use Copy to Field List to select the fields you want to copy to the field list of the DataSource. All fields are selected by default.
       6.      Go to the Fields tab page.
Here you edit the fields that you transferred to the field list of the DataSource from the Proposal tab page. If you did not transfer the field list from a proposal, you can define the fields of the DataSource here.
                            a.      To define a field, choose Insert Row and specify a field name.
                            b.      Under Transfer, specify the decision-relevant DataSource fields that you want to be available for extraction and transferred to BI.
                            c.      Instead of generating a proposal for the field list, you can enter InfoObjects to define the fields of the DataSource. Under Template InfoObject, specify InfoObjects for the fields in BI. This allows you to transfer the technical properties of the InfoObjects into the DataSource field.
Entering InfoObjects here does not equate to assigning them to DataSource fields. Assignments are made in the transformation. When you define the transformation, the system proposes the InfoObjects you entered here as InfoObjects that you might want to assign to a field.
                            d.      Change the data type of the field if required.
                            e.      Specify the key fields of the DataSource.
These fields are generated as a secondary index in the PSA. This is important in ensuring good performance for data transfer process selections, in particular with semantic grouping.
                              f.      Specify whether lowercase is supported.
                            g.      Specify whether the source provides the data in the internal or external format.
                            h.      If you choose the external format, ensure that the output length of the field (external length) is correct. Change the entries, as required.
                              i.      If required, specify a conversion routine that converts data from an external format into an internal format.
                              j.      Select the fields that you want to be able to set selection criteria for when scheduling a data request using an InfoPackage. Data for this type of field is transferred in accordance with the selection criteria specified in the InfoPackage.
                            k.      Choose the selection options (such as EQ, BT) that you want to be available for selection in the InfoPackage.
                              l.      Under Field Type, specify whether the data to be selected is language-dependent or time-dependent, as required.
       7.      Check, save and activate the DataSource.
       8.      Go to the Preview tab page.
If you select Read Preview Data, the number of data records you specified in your field selection is displayed in a preview.
This function allows you to check whether the data formats and data are correct.
For More Info: http://help.sap.com/saphelp_nw70/helpdata/EN/43/01ed2fe3811a77e10000000a422035/content.htm

Data loading from DSO to Cube

Hi,
I have a question,
In book TBW10 i read about the data load from DSO to InfoCube
" We feed the change log data to the InfoCube, 10, -10, and 30 add to the correct 30 value"
My question is cube already have 10 value, if we are sending 10, -10 and 30 Values(delta), the total should be 40 instead of 30.
Please some one explaine me.
Thanks

No, it will not be 40.
It ll be 30 only.
Since cube already has 10, so before image ll nullify it by sending -10 and then the correct value in after immage ll be added as 30.
so it ll be like this 10-10+30 = 30.
Thank-You.
Regards,
Vinod

Error is data loading from 3rd party source system with DBCONNECT

Hi,
We have just finished an upgrade of SAP BW 3.10 to SAP NW 7.0 EHP1.
After the upgrade, we are facing a problem with data loads from a third party Oracle source system using DBConnect.
The connection is working OK and we can see the tables in the source system. But we cannot load the data.
The error in the monitor is as follows:
'Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.'
But, unfortunately, the error message has no further information.
If we look at the job log in sm37, the job finished with the following log -
27.10.2009 12:14:19 Job started                                                                                00           516          S
27.10.2009 12:14:19 Step 001 started (program RSBATCH1, variant &0000000000119, user ID RXSAHA)                    00           550          S
27.10.2009 12:14:23 Start InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG                                              RSM1          797          S
27.10.2009 12:14:24 Element NOAUTHORITYCHECK is not available in the container                                     OL           356          S
27.10.2009 12:14:24 InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG created request REQU_4FMXSQ6TLSK5CYLXPBOGKF31G     RSM1          796          S
27.10.2009 12:14:24 Job finished                                                                                00           517          S
In a BW 3.10 system, there is no message related to element NOAUTHORITYCHECK. So, I am wondering if this is something new in NW 7.0.
Thanks in advance,
Rajib

There will be three things to get the errors like this
1.RFC CONNECTION FAILED
2.CHECK THE SOURCE SYSTEM
3.CHECK IT OUT WITH Oracle Consultants WEATHER THEY ARE FILLING UP THE LOADS.TELL THEM TO STOP
4.CHECK I DOC PROCESSING
5.FINALLY MEMORY ISSUES.
6.CATCH THE DATA SOURCE FIRST CHANGE IT AND THEN ACTIVATE AND RUN THE LOAD
7.LAST IS MEMORY ISSUE.
and also Check the RFC connection in SM59 If it is ok then
check the SAP note : 692195 for authorization
Santosh

How to find the data loaded from r/3 to bw

hi
how to find the data loaded from r/3 to bw is correct . i am not able to find which feild in the query is connected to which feild in the r/3 . where i am geting the data from r/3 . is there any process to find which feild and table the data is comming from . plz help
thanks in advance to u all

Hi Veda ... the mapping between R/3 fields and BW InfoObjects should take place in Transfer Rules. Other transformation could take place in Update Rule.
So you could proceed this way: look at InfoProvider Data Model and see if the Query does perform any calculation (even with Virtual keyfigures / chars). Than go back to Update Rules and search for other calculation / transformation. At least there are Tranfer Rule and eventually DataSource / Extraction Enhancements.
As you can easily get there are many points where you have to look for ... it's a quite complex work but very usefull.
Once you will have identified all mappings / transfromation see if BW data matchs R/3 (considering calculations ...)
Good job
GFV

How we can automate the data loading from BI-BPC

Dear Guru's
Thanks for watching this thread,my question is
How we can load the data from BI7.0 to BPC.My environment is SAP-BI 7.0 and BPC is 7.5 MS version and 2008SQL.
How we can automate the data loading from BI- BPC Ms version.Is manual flat file load is mandatory in ms version.
Thanks in Advance,
Srinivasan.

Here are some options
1) Use standars packages and schedule them :
A) Openhub masterdata file into a flat file/ BPC App server and Schedule the package - Import Master Data from a Data File and other relevent packages.
2 ) Using Custom Tasks in Custom Packages ( SSIS)
Procedure
From the Microsoft SQL Server Business Intelligence Developer Studio, open the Microsoft SSIS folder.
Create a new package, or select an existing package to modify.
Choose Task Register Custom Task .
In the Task Location field, browse for the target .dll file.
Note
By default, the .dll files are stored in BPC/Websrvr/bin.
End of the note.
Enter a task description, select an appropriate icon, then click OK.
Drag the icon to the designer window. Enter data as required.
Save the package.

Number of parallel process definition during data load from R/3 to BI

Dear Friends,
We are using Bi7.00. We have a requirement in which i should increase the number of parallel process during data load from R/3 to BI. I want to modify this for a particular data source and check.Can experts provide helpful answers for the following question.
1) When load is taking place or have taken place, where can we see how many parallel process that particular load has taken.
2) Where should i change the setting for the number of parallel process for data load (from R/3 to BI) and not within BI.
3) How system works and what will be net result of increasing or decreasing the number of parallel process.
Expecting Experts help.
Regards,
M.M

Dear Des Gallagher,
Thank you very much for the useful information provided. The following was my observation.
From the posts in this forum, i was given to understand that the setting for specific data source can be done in the infopackage and DTP level, i carried out the same and found that there is no change in the load, i.e., system by default takes only one parallel process even though i maintained 6.
Can you kindly explain about the above mentioned point. i.e.,
1) Even though the value is maintained in the infopackage level , will system consider it or not. -> if not then from which transaction system is able to derive the 1 parallel process.
Actually we wanted to increase the package size but we failed because i could not understand what values have to be maintained -> can you explain in detail
Can you calrify my doubt and provide solution?
Regards,
M.M

Data load from R3 is slow and gives rfc connection error

Hi all, is there any debug capabilties available on BI 7.0 when it comes to debug data load from R3 using rfc connection ( aleremote and bwiremote users )
any ideas where can I look for solution.
thanks.

Hi,
Check the connection between the R/3 and BW.
or It may be the network problem contact system admin or basis people.
thanks,
dru

Summing up key figure in Cube - data load from ODS

Hello Gurus,
I am doing a data load from ODS to cube.
The records in ODS are at line-item level, and all needs to be summed up at header level. There is only one key-figure. ODS has header and line-item fields.
I am loading only header field data ( and not the item-field data) from ODS to Cube.
I am expecting only-one record in cube ( for all the item-level records) with all the key-figures summed up. But couldn't see that.
Can anyone please explain how to achieve it.
I promise to reward points.
=====
Example to elaborate my point.
In ODS
Header-field item-field   quantity
123                301          10
123                302           20
123                303           30
Expected record in Cube
Header-field       Quantity
   123                    60
====================
Regards,
Pramod.

Hello Oscar and Paolo.
Thanks for the reply. I am using BW 7.0
Paolo suggested:
>>If you don't add item number to cube and put quantity as adition in update rules >>from ODS to cube it works.
I did that still I get 3 records in cube.
Oscar Suggested:
>>What kind of aggregate do you have for your key figure in update rules (update >>or no change)?
It is "summation". And it cannot be changed. (Or at least I do not know how to change it.)
There are other dimensions in the cube - which corresponds to the field(s) in ODS.
But, I just mentioned these two (i.e. header and item-level) for simplicity.
Can you please help?
Thank you.
Pramod.

BPC:: Master data load from BI Process chain

Hi,
we are trying to automatize the master data load from BI.
Now we are using a package with:
PROMPT(INFILES,,"Import file:",)
PROMPT(TRANSFORMATION,%TRANSFORMATION%,"Transformation file:",,,Import.xls)
PROMPT(DIMENSIONNAME,%DIMNAME%,"Dimension name:",,,%DIMS%)
PROMPT(RADIOBUTTON,%WRITEMODE%,"Write Mode",2,{"Overwirte","Update"},{"1","2"})
INFO(%TEMPNO1%,%INCREASENO%)
INFO(%TEMPNO2%,%INCREASENO%)
TASK(/CPMB/MASTER_CONVERT,OUTPUTNO,%TEMPNO1%)
TASK(/CPMB/MASTER_CONVERT,FORMULA_FILE_NO,%TEMPNO2%)
TASK(/CPMB/MASTER_CONVERT,TRANSFORMATIONFILEPATH,%TRANSFORMATION%)
TASK(/CPMB/MASTER_CONVERT,SUSER,%USER%)
TASK(/CPMB/MASTER_CONVERT,SAPPSET,%APPSET%)
TASK(/CPMB/MASTER_CONVERT,SAPP,%APP%)
TASK(/CPMB/MASTER_CONVERT,FILE,%FILE%)
TASK(/CPMB/MASTER_CONVERT,DIMNAME,%DIMNAME%)
TASK(/CPMB/MASTER_LOAD,INPUTNO,%TEMPNO1%)
TASK(/CPMB/MASTER_LOAD,FORMULA_FILE_NO,%TEMPNO2%)
TASK(/CPMB/MASTER_LOAD,DIMNAME,%DIMNAME%)
TASK(/CPMB/MASTER_LOAD,WRITEMODE,%WRITEMODE%)
But we need to include these tasks into a BI process chain.
How can we add the INFO statement into a process chain?
And how can we declare the variables?
Regards,
EZ.

Hi,
i have followed your recomendation, but when i try to use the process /CPMB/MASTER_CONVERT, with the parameter TRANSFORMATIONFILEPATH and the root of the transformation file as value, i have a new problem. The value only have 60 char, and my root is longer:
\ROOT\WEBFOLDERS\APPXX\PLANNING\DATAMANAGER\TRANSFORMATIONFILES\trans.xls
How can we put this root???
Regards,
EZ.

Automated data load from APO to SEM transactional cube

Hi ,
We have BW-SEM system integrated with APO system.
I could see automated data loads from APO to SEM transactional cube ..
Infopackage name as "Request loaded using the APO interface without monitor log" ..
I don't see any infopackage by this name in both the systems ( APO & SEM )..
I am not sure how it configured ..
Appreciate any inputs on how its happens .....
Thanks in advance

Hi,
As I mentioned the starting point will be the tcode BPS0. There will be 2 planning areas created (if I am correct) one for SEM cube and the other for APO cube. The better way to find it will be goto tcode se16 and enter UPC_BW_AREA and key in the cube names in the cube field. this will give you the planning area names now look for a multiplanning area which has the 2 areas included in them (this is available in table UPC_AREAM).
then goto BPS0 and you will have to find which function is being used to post the data.
thanks

Error : Data load from relation source (SQL Server 2005) to Essbase Cube

Hi All,
I am looking help from you. I am trying to load data from SQLServer 2005 table to Essbase Cube using IKM SQL to Hyperion Essbase (Metadata) Modules.
I am getting below error. Let me know if i am missing some things.
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 61, in ?
com.hyperion.odi.essbase.ODIEssbaseException: Invalid value specified [RULES_FILE] for Load option [null]
     at com.hyperion.odi.essbase.ODIEssbaseMetaWriter.validateLoadOptions(Unknown Source)
     at com.hyperion.odi.essbase.AbstractEssbaseWriter.beginLoad(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
     at org.python.core.PyMethod.__call__(PyMethod.java)
     at org.python.core.PyObject.__call__(PyObject.java)
     at org.python.core.PyInstance.invoke(PyInstance.java)
     at org.python.pycode._pyx3.f$0(<string>:61)
     at org.python.pycode._pyx3.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java)
     at org.python.core.PyCode.call(PyCode.java)
     at org.python.core.Py.runCode(Py.java)
     at org.python.core.Py.exec(Py.java)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Invalid value specified [RULES_FILE] for Load option [null]
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)

ODI Step: Prepare for Loading Step:
from java.util import HashMap
from java.lang import Boolean
from java.lang import Integer
from com.hyperion.odi.common import ODIConstants
from com.hyperion.odi.connection import HypAppConnectionFactory
# Target planning connection properties
serverName = "HCDCD-HYPDB01"
userName = "admin"
password = "<@=snpRef.getInfo("DEST_PASS") @>"
application = "BUDGET01"
database = "PLAN1"
portStr = "1423"
srvportParts = serverName.split(':',2)
srvStr = srvportParts[0]
if(len(srvportParts) > 1):
portStr = srvportParts[1]
# Put the connection properites and initialize the essbase loader
targetProps = HashMap()
targetProps.put(ODIConstants.SERVER,srvStr)
targetProps.put(ODIConstants.PORT,portStr)
targetProps.put(ODIConstants.USER,userName)
targetProps.put(ODIConstants.PASSWORD,password)
targetProps.put(ODIConstants.APPLICATION_NAME,application)
targetProps.put(ODIConstants.DATABASE_NAME,database)
targetProps.put(ODIConstants.WRITER_TYPE,ODIConstants.DATA_WRITER)
print "Initalizing the essbase wrapper and connecting"
pWriter = HypAppConnectionFactory.getAppWriter(HypAppConnectionFactory.APP_ESSBASE, targetProps);
tableName = "BUDGET01_PLAN1"
rulesFile = r"ActLd"
ruleSeparator = "Tab"
clearDatabase = "None"
calcScript = r""
maxErrors = 1
logErrors = 1
errFileName = r"E:\OraHome_ODI\Error\Budget01Plan1.err"
logEnabled = 1
logFileName = r"E:\OraHome_ODI\Error\Budget01Plan1.log"
errColDelimiter = r","
errRowDelimiter = r"\r\n"
errTextDelimiter = r"'"
logHeader = 1
commitInterval = 1000
calcOnly = 0
preMaxlScript = r""
postMaxlScript = r""
abortOnPreMaxlError = 1
# set the load options
loadOptions = HashMap()
loadOptions.put(ODIConstants.CLEAR_DATABASE, clearDatabase)
loadOptions.put(ODIConstants.CALCULATION_SCRIPT, calcScript)
loadOptions.put(ODIConstants.RULES_FILE, rulesFile)
loadOptions.put(ODIConstants.LOG_ENABLED, Boolean(logEnabled))
loadOptions.put(ODIConstants.LOG_FILE_NAME, logFileName)
loadOptions.put(ODIConstants.MAXIMUM_ERRORS_ALLOWED, Integer(maxErrors))
loadOptions.put(ODIConstants.LOG_ERRORS, Boolean(logErrors))
loadOptions.put(ODIConstants.ERROR_LOG_FILENAME, errFileName)
loadOptions.put(ODIConstants.RULE_SEPARATOR, ruleSeparator)
loadOptions.put(ODIConstants.ERR_COL_DELIMITER, errColDelimiter)
loadOptions.put(ODIConstants.ERR_ROW_DELIMITER, errRowDelimiter)
loadOptions.put(ODIConstants.ERR_TEXT_DELIMITER, errTextDelimiter)
loadOptions.put(ODIConstants.ERR_LOG_HEADER_ROW, Boolean(logHeader))
loadOptions.put(ODIConstants.COMMIT_INTERVAL, Integer(commitInterval))
loadOptions.put(ODIConstants.RUN_CALC_SCRIPT_ONLY,Boolean(calcOnly))
loadOptions.put(ODIConstants.PRE_LOAD_MAXL_SCRIPT,preMaxlScript)
loadOptions.put(ODIConstants.POST_LOAD_MAXL_SCRIPT,postMaxlScript)
loadOptions.put(ODIConstants.ABORT_ON_PRE_MAXL_ERROR,Boolean(abortOnPreMaxlError))
#call begin load
pWriter.beginLoad(loadOptions)
Execution step from opartor:
Read rows: 0
Insert/Delete/updat rows: 0
ODI Step: Load Data Into Essbase
from com.hyperion.odi.common import ODIConstants
from com.hyperion.odi.connection import HypAppConnectionFactory
from java.lang import Class
from java.lang import Boolean
from java.sql import *
from java.util import HashMap
# Get the select statement on the staging area:
sql= """select C1_ACCOUNT "Account",C3_TIMEPERIOD "TimePeriod",C4_LOBS "LOBs",C5_TREATY "Treaty",C6_SCENARIO "Scenario",C7_VERSION "Version",C8_CURRENCY "Currency",C9_YEAR "Year",C10_DEPARTMENT "Department",C11_ENTITY "Entity",C2_DIVLOC "DivLoc",C12_DATA "Data" from OdiMapping.dbo.C$_0BUDGET01_PLAN1Data where      (1=1) """
srcCx = odiRef.getJDBCConnection("SRC")
stmt = srcCx.createStatement()
srcFetchSize=30
stmt.setFetchSize(srcFetchSize)
rs = stmt.executeQuery(sql)
#load the data
stats = pWriter.loadData(rs)
#close the database result set, connection
rs.close()
stmt.close()
ODI Step: Report Statistics
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 2, in ?
Essbase Writer Load Summary:
     Number of rows successfully processed: 1
     Number of rows rejected: 0
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.h.y(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
Where am i doing wronge for data load in Essbase? How I will find correct information to load data into Essbase?

Data Load from Source to Destination

Hello Forum Members,
I have to databases on different solaris servers.
I have to load data from Source Table[Server 1] to Target Current Table[truncate existing data and load from Source Table] [Server 2]and on every Wednesday from Target Current Table into Target History Table[Data always appended][Server 2].
Any advice how to solve the issue is highly appreciated.
Thanks and Regards,
Suresh

Unless there is a history table on the remote server, the history table would not appear to be an appropriate candidate for a materialized view.
You could, in theory, create the live table as a materialized view rather than doing a TRUNCATE (or DELETE) and INSERT INTO SELECT in your stored procedure. Since it sounds like you need to have some coordination between the refreshing of the materialized view and the population of the history table, it's not obvious that creating the live table as a materialized view buys you anything.
Justin

Data load from DSO to cube

Hi gurus
We have a typical problem, we have to combined 2 records into one when they reach to DSO.
One source is flat file and the other is R3. so few fields I am geting from flat file and few from R3 . They are creating one record when they loaded to DSO . Now I am getting one record in active data table but when I load the data to cube from that DSO ( Data is going from change log to cube ) to cube , I am getting 2 seperate records ( one which is loaded from flat file and one which is loaded from R3 ) in cube which I dont want. I want only one record in cube just like i have in my active data table in DSO.
I cant get the data from Active data table because I need delta load.
Would you please advise what can I do to get that one record in Cube?
Pl help

Ravi
I am sending the data thro DTP only but is there any solution to get one record bcos in other scenario I am getting data from 2 different ERP sources and getting one record in DSO and cube as well.
but that is not happening for this second scenario where i am getting data from FLAT file and ERP and traing to create one record.

Data load from Legacy system to BW Server through BAPI

Requirements: We have different kind of legacy systems and SAP BW server. We want to load all legacy system data into SAP BW server using BAPI. Before loading we have to validate all data. If there are bad data, data missing we have to let the legacy system user/ operator knows to fix the data into their system with detail explanation. When it is fixed, we have to load the data again.
Load Scenario: We have two options to load data from legacy systems to BW Server.
1. We need to load data directly from legacy system to BW Server using BAPI program.
2. Legacy Systems data would be in workstations or flash drive as .txt (one line separated by comma) or .csv file. Need to load from .txt /.csv file to BW Server using BAPI program.
What we want in the BAPI program code?
It will Read / Retrieve data from text / csv file and will put into the Internal table. Internal table structure would be based on BAPI InfoObject structure.
Call BAPI InfoObject function module BAPI_IOBJ_CREATE to create InfoObject, include all necessary / default components, do the error check, load the data and return the status.
Could some one help me with the sample code please? I am new in ABAP / BAPI coding.
Is there any other better idea to load data from legacy system to BW server? BTW we are using BW 3.10. Is there any better option with BI 7.0 to resolve the issue? I appreciate your help.

my answers:
1. this is a scendario for a data push into SAP BW. You can only use SOAP-Based Transfer of Data.
http://help.sap.com/saphelp_nw04/helpdata/en/fd/8012403dbedd5fe10000000a155106/frameset.htm
(here for BW 3.5, but you'll find similar for 7.0)
In this scenario you'll have an RFC dinamically created for every Infosource you need to transfer data.
2. You can make a chain for each data load, so you can call the RFC "RSPC_API_CHAIN_START" to start the chain from external.
the second solution is more simply and available on every release.
Regards,
Sergio

Data loading from identical metadata of different databases

Similar Messages

Maybe you are looking for